Resume PArser for MSCRM 2013

Hi FOlks,
I need to build a plugin to parse resume which is added as attachment to contact record .
Low level req:
User adds resume as attachment.
Clicks on button on form
Plugin should trigger and Get data from that resume and create contact record with that details(Name, Ph Number etcc)
Thanks in Advance.
Regards,
Nandan S

Start by looking at this article -
http://mscrmuk.blogspot.co.uk/2011/04/removing-prompt-for-credentials-when.html - this should help determine if the issue is client-side or server-side. (The article is a bit dated, but is still relevant for Crm 2013 if it is configured for AD authentication).
If it looks like the issue is server-side, check the event logs (including the System event log) for any relevant errors
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Similar Messages

  • Render ssrs report as PDF in mscrm 2013 online plugin

    Dear all;
    i want to render an ssrs report as PDF for mscrm 2013 online an attach that with e-mail .i can see in the sdk that we can download the report defination file but is there anyway we can execute that rdl and then render it to pdf or anyother solution 
    Remeber i am talking about online version of mscrm
    please help

    Hello Devster,
    Thank you to post your question on TechNet forum.
    After reviewing the whole post, I have a question to you. You can access the report via the link, http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter.
    From the URL, I can see that the report is located at: /Data Mgmt/Sample Letter, instead of /DataMgmt/Sample Letter. In addition, I found that the target report is "/DataMgmt/Sample HAP Letter" instead of "/DataMgmt/Sample Letter" as the error described. I
    am not sure whether you post out the correct code segment.
    Please check the above things on your side, and hope it is helpful to you.
    Regards,
    Edward
    Edward Zhu
    TechNet Community Support

  • Regarding E-Recruitment Resume Parsing

    Hi,
    We are upgrading to E-Recruitment EHP4.  In that for the External Candidate, the resume parsing function plays a major role and this can be done using a third party vendor. Can anyone suggest about the vendor for resume parsing or is there anyway that we can bypass this parsing and proceed further.
    Thanks and Best Regards,
    Vivek.

    Hi,
    I do not know any third party vendor I could recommend to you.
    As I understand you want to deactivate this function, don't you?
    Go to Technical Settings -> User Interfaces -> Candidate -> Backend Candidate -> Assign Values to Interface Parameters. Remove the X in the entry RSP_IN_UNREG_AWZD.
    Regards
    Sebastian

  • Resume parsing in oracle iRecruitment

    Hi All
    I am new to iRecruitment module i would be really thankfull if any one helps me.
    Regarding the resume parsing i know that managers or recruiters can search for resumes through Resume keword search does oracle provides minimum functionality for that or that works only if any third party tool is enabled.I have actually tried with searching some resumes through Resume keword search from manager/recruiter responsibilities but its not picking those resumes.
    Is there any profile options or setups are needed to make it work.
    Please help me in this.Thank you

    Hi, Dear ALL:
    My HR Staffing group now is also looking for an effective resume parsing alternative. Searching thru metalink, I did not get any answer. Looking into your discussion forum, I have a few comments and questions:
    (1) As far as I could have experimented, Oracle's keyword search functionality in iRecruitment does not allow you to search on the resumes' contents. I tried it but it did not work. We do have the Index Synchronization concurrent program scheduled running. The regular keyword search works, but it does not alllow us to do "Resume" search. Could sombody who knows kindly comment on this or shed some lights ?
    (2) I tried to contact Resume Mirror sales team, so far I have not heard from anybody. Did anybody go thru an implementation with them and can shed some lights about how much is the implementation cost and how long does it take etc.? From the cost benefit point of view, is it worth the efforts and costs?
    (3) Does anybody know how to impelement a "Boolean Search" functionality via Oracle Text? Could anybody kindly shed some light on where to find proper documentation to have it set up properly so that we can just use it via iRecruitment Candidate Search web page? If this functionality can be turned on, how is this compared with Resume Mirror's search funtionality?
    Your kind assistance or input on these would be greatly appreciated. Thanks so much.
    Sincerely,
    Christie

  • EREC- Resume Parsing

    Hi All,
    I am trying to use the Resume Parsing functionality. But i am not able to understand the standard functionality. Also on Clicking Parse Button i am getting the following erros in SLG1 log:
    Error for activity GUID 4DF20A07ACCF6808E100000061FD22A9
    The incorrect HR object has the key 01NA50011776
    The error occurred in program CL_HRRCF_ACT_PARSING_RECORD===CM003 line 154
    The error occurred in program CL_PROXY_RUNTIME_ERRORS=======CM005 line 10
    The error occurred in program CL_PROXY_RUNTIME_ERRORS=======CM008 line 16
    AND
    The error occurred in program CL_PROXY_RUNTIME_ERRORS=======CM005 line 10
    The error occurred in program CL_PROXY_RUNTIME_ERRORS=======CM008 line 16
    My Question is: What exactly will happen when i click on Parse?
    The uploaded CV would be a word document, the content inside is not in any specific format, so how will this functionality work?
    Regards,
    Kishore

    Hi Kishore
    Have you fully implemented all the customizing steps required from note 1122135, (EHP3) and  1276543 and 1516634 (EHP4)  it sounds from the error that this is either an issue with the XI connection not correctly working or that in the sender HCM system where it has to generate an XML from the uploaded  "doc" format document in order to send the same to the XI system that this is not correctly occuring.
    One other possibility is that the field Resume/FormattedLanguage was not left as'English', for example. This element should have been mapped to a code acceptable to the ABAP proxy, for example 'EN' as this can lead to similar internal error, you could check some of the sample mapping in the standard version to make sure.
    Hope this gives you some place to start to see if can be resolved!
    Kind regards
    Sally

  • Talent Technologies Resume Mirror for iRecruitment R12

    Hi there
    I am wandering if anybody else is using Talent Technologies Resume Mirror for resume parsing in iRecruitment R12.0.x, do you have any issues, or can you point me to any documents that describe configurations, standard users errors etc... TIA

    Hi,
    Please see these documents.
    Note: 850045.1 - Integration with Resume Mirror and iRecruitment
    Note: 466323.1 - Qualification Date Received does not Appear in iRecruitment When Resume Parsed Though Resume Mirror
    Note: 387524.1 - iRecruitment List Of Supported 3rd Party Vendors / Products
    Note: 733837.1 - Resume Parsing is Adding a ‘Space’ After the Last Name
    Regards,
    Hussein

  • IRecruitment: Background Checks and Resume Parsing

    Hi all,
    Does anyone have experience with Background Check and Resume Parsing features in iRecruitment? There is not a lot about it in the implementation guide and Metalink.
    Do we have to make an interface for it? I know that HireRight is the approved Oracle vendor for background checks and we need to send them data in XML format through HTTPS or some other method. I want to have some guidelines regarding this from functional point of view.
    Thanks all.

    I've been involved with the implementation of resume parsing and background checking twice. Both times, the HireRight implementation was very simple. Only a couple of profile options and then some network configuration. (there is a bit of work to be done, however, on the deal with HireRight. e.g. which background checks are your recruiters allow to request, etc)
    Resume parsing on the other hand, can be a bit more tricky. The setups on the IRC functional side are also simple, but the configuration of the wallets and other DMZ related items proved to be very time-consuming.

  • E Recruitment Resume Parsing...

    Hi,
    May i request for the details of Resume parsing ( config, technicalities and other imp things ).
    Appreciate if anybody has some documentation on this.
    thanks
    rafi

    Hi,
    I do not know any third party vendor I could recommend to you.
    As I understand you want to deactivate this function, don't you?
    Go to Technical Settings -> User Interfaces -> Candidate -> Backend Candidate -> Assign Values to Interface Parameters. Remove the X in the entry RSP_IN_UNREG_AWZD.
    Regards
    Sebastian

  • EREC: Resume Parsing with EhP 4

    Hello Experts,
    Does the Standard (as of EhP 4) solution provides Resume Parsing functinality for External/Internal Candidates? Or do I need to create an Interace to Third party provider?
    Thanks!
    Sivani

    Hi,
    It does.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/49/176078a2e314cde10000000a42189b/frameset.htm
    Source: help.sap.com
    Hope this helps.
    Donnie

  • Install of the CRM for Outlook 2013 client fails

    Hi,
    I don't know if I'm in the right place to post, but here I am :
    Some people in my organization have got an Office 365 license as well as a
    Microsoft Dynamics CRM Online account. I want to install the client CRM For Outlook in order to allow them to manage the CRM from their Outlook client.
    So I've downloaded the soft Microsoft Online Services Sign-In Assistant for IT Professionals RTW (as it's specified I should install it first), and downloaded the
    CRM for Outlook 2013 client.
    The steps followed
    Test was made on a Dell laptop with Win 7 x64 Pro. :
    Closed Outlook
    Installed the first one (MS Online Services ... -IT Pro)
    Tried to install the CRM with domain admin privileges. It failed
    with the following warnings in the log file :
    15:35:51|Warning| Failed to register notify interface. Error : 0x800704dd.
    15:37:10|Warning| Failed to add the file C:\Users\ADMINI~1\AppData\Local\Temp\MSCRM_{B7297F92-E151-4897-870D-CDDF179FC6CE}\SSCERuntime_x64-1036.exe to the created job. Error : 0x800704dd.
    15:37:12|Warning| Installation package C:\Users\Administrateur\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\187CZTA8\SSCERuntime_x64-FRA[1].exe failed validation check(s).
    15:37:12|  Error| Installation of Microsoft Dynamics CRM for Outlook failed.
    But it works on other environment
    On the other hand, I've tested it on my computer (Win 7 x64 as well) and it succeeded. For both computers, I use Outlook 2010, and every system hadn't any trace of CRM for Outlook before.
    Note : I only wrote the
    Warning events, not the information tagged events. I searched for this problem across the Web; unfortunatly nobody seems to have reported this specific issue.
    Note 2 : If you need any complementary information, I'll be glad to provide it.
    So I am asking, where can be the matter ? Thanks in advance for any help !

    Hi,
    Try to perform a clean boot then install the CRM 2013 for Microsoft Office Outlook.
    To perform a clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
    Note If you are prompted for an administrator password or for confirmation, you should type the password or provide confirmation.
    Collapse this imageExpand this image
    On the General tab, click the Selective startup
    option, and then click to clear the Load startup items check box.  (The
    Use Original Boot.ini check box is unavailable.)
    Collapse this imageExpand this image
    On the Services tab, click to select the Hide all Microsoft services check box, and then click
    Disable all.
    Collapse this imageExpand this image
    Note This step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not
    do this if you want to use the System Restore utility together with existing restore points.
    Click OK, and then click Restart.
    This way we can eliminate the affect by background programs, install the software to see if the error still occurs.
    If the issue persists in clean boot, please collect the Setup log files from this path:
    SystemDrive:\Users\<User>\AppData\Local\Microsoft\MSCRM\Logs
    Send the logs to our email address for further analysis:
    [email protected]
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • HT201412 I cannot open the month of March 2013 in my iPad3 calendar. I can however see it in the year view for 2013 and I can view the daily and weekly calendars for March 2013. Any ideas what has gone wrong ? Thanks

    I have a new iPad3 and have found I cannot open the month of March 2013 when I tap on it. All other months open OK ! I can see March 2013 in the yearly view and I can open the individual days, and weeks, of March 2013 but I cannot see the whole month in the monthly view. When I try to open the monthly view for March 2013 it returns me to the start screen which shows all the apps etc and closes the Calendar app. Any guidance of what is going wrong and how it can be corrected. Thanks !

    Don't worry we have to start somewhere. Feel free to post your questions here, we learn from each other.

  • Configuring Lync Server 2013 to be a partner Application for Exchange 2013

    Hello Guys,
    I just want to share my experience while configuring Lync server 2013 to be a partner Application for exchange 2013 sever. 
    As mentioned on technet you need to run Configure-EnterprisePartnerApplication.ps1 script that ships with Exchange 2013. 
    But when I tried to run the script as described on the technet article, I found it always fails with " the accepted domain is not valid"
    I have checked my accepted domains many times and i found that there's no issues with my configured accepted domain. 
    So I started to review the script to find the issue and I found that the script was configured  as below 
    $acceptedDomains = Get-AcceptedDomain ;
      if ($acceptedDomains -eq $null)
        WriteError ("There is no accepted domain so user can not be created.")
      $acceptedDomain = $acceptedDomains[0].Name;
      if($UseDomainController -eq $true)
        $user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
    set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
      else
        $user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
    set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true; 
    which is totally wrong as below: 
    firstly it makes $AcceptedDomain variable to equal the Name of the accepted domain. 
    Not all customers configure the name of the Accepted Domain to be the Domain Name.
    Secondly  it makes $AcceptedDomain variable to equal the name of the first Accepted Domain.
    The first domain may be not the default Accepted Domain. 
    So I have configured the script as below
    $acceptedDomains = Get-AcceptedDomain | ? {$_.Default -eq "True"}  ;
      if ($acceptedDomains -eq $null)
        WriteError ("There is no accepted domain so user can not be created.")
      $acceptedDomain = $acceptedDomains.DomainName;
      if($UseDomainController -eq $true)
        $user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
    set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
      else
        $user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
    set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true; 
    I hope This help. 
    Thanks 
    Ahmed Fouad

    Hi,
    This is helpful, thanks for sharing.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • XML Parser for C++ v2 on HP-UX 11.00

    Hi,
    We are using XML parser for C++ v2(2.0.1) on HP-UX 11.00.Oracle version is 8.0.5. Our application is dumping core .analyzing the core gives pointers to Oracle function calls. We found that some datatypes in parser's oratypes.h (e.g ub4,sb4)were not in consistence with datatypes in native Oracle's oratypes.h.how to solve this problem? is there any linkage or Includepath order recommended to solve this? let me know if u know any solution/workaround
    thanx in advance
    vijayanand
    null

    We're working on getting this fixed. Thanks for reporting it.

  • How do I leverage a custom theme for Outlook 2013?

    Microsoft has a problem. They use the term "theme" in Office in 2 different ways: 1) the 3 background colors you can choose of the Office applications and 2) a collection of colors, fonts, and layout that can be customized and defined by the user
    for the applications.
    I know how to create a theme in PowerPoint and save it as a default for all new presentations. Allegedly you can you this across Office applications but this is where it breaks down (as far as my user experience goes).
    I've created a theme in PowerPoint. It has my custom colors. I want to use that same collection in Outlook.
    I can apply it on a email by email basis (Options menu for an email), but I want the default email (new or reply) to use that custom theme. I see my theme in the drop down menu under a heading of Custom, but there isn't a way to set it as default
    (behavior differs from PowerPoint here).
    So I look under the Outlook File menu, then Options and select Mail. You can change stationary, but the custom theme isn't an option there.
    Then there is Styles under the Format Text menu when in a new email. There are color options and font options, but again, no way to leverage the work I did in creating the custom theme.
    Searching on customizing themes for Outlook only gets me answers on the first use of the word theme, not the latter.
    Is there no way to you the theme I created for Outlook 2013?

    Its very simple - if you want a product that remains consistent and does not change its layout every few years, that is fully customizable, and will remain being supported by subsequent operating systems, then get an open source product running in an open
    source OS. It seems that you can no longer rely on MS to provide consistency, stability, or support for their own products. 
    When will MS realise that customer familiarity with their products is their intellectual property, like branding, which you would never trash every five years. Imagine that MS wanted to change their name to a new company name, or their Outlook brand to Inlook
    - it would never happen. So why is thee trade getup and arrangement changing so often and against what their customers want? Is it to justify thee new products? Maybe with cloud and 365, they will finally be happy and stop mucking about with what works (after
    they change everything back to '95 /XP format?).

  • New Income tax slab for FY 2013-14 / AY 2014-15-Not working in SAP

    Dear Consultants,
    According to Indian Govt New Income tax slab for FY 2013-14 / AY 2014-15,
    Taxable Income in 10% slab maximum tax will be Rs 28000 (taking 2000 tax credit
    into consideration) is there any SAP note to be apply for this condition, Please do needful. 
    Thanks in Advance,
    Navesh

    Dear Friends,
    My issue is closed, by applying the below note. this will be useful for others in future
    SAP NOTE :- 1850965
    As per the Union Budget 2013 - 2014, for individuals having a taxable income less than 5 Lac, a tax credit of INR 2,000 would be given. While executing payroll (TCode: PC00_M40_CALC_SIMU) for employees, when a cross financial year retro is triggered from previous year, tax credit amount is being generated. However, it is not reducing the overall tax liability of the employee. This behavior is incorrect. For an employee 'X' a cross financial retro is triggered. After considering the cross FY arrears, employees' taxable income comes out to be less than 5 Lac. In this case, a tax credit of INR 2,000 is generated. Suppose, the overall tax liability of employee 'X' was INR 10,000, then even after tax credit his liability remains 10,000. Tax liability for employee shall become INR 8,000 (10,000 - 2,000).
    To apply this Note Need to apply the HR Support Package : Release 604, Package Name: SAPK-60462INSAPHRCIN
    Thanks & Regards,
    Navesh

Maybe you are looking for