Retail Price Standard Extractors

Hello All
This is the first time I am posting in this site. I am working at a client site where there is BI 7.0 against IR-Retail (ECC).
There is a requirement to get the Regular Retail Price from A071, A073 and KONP tables. Here is the brief logic for this.
Get the Condition Record Number from A071 if it is maintained at Site level. If not get the Condition Record Number from A073. Once you have condition record number go to KONP and get the corresponding price for this condition record number.
My question to you all is:
Is there a standard extractor available for this and how about any standard DSO or Cube?
Your help is greatly appreciated.
Thank you
Nag

Hi, Dennis:
I am working on a similar situaltion and I came across this post.
If I need to use SAP table A004 and KONP on R3 to get list price to BW.
Do you think there is any standard SAP extractors offered?
I am not sure if all "Axxx" related tables does not contain any SAP related built in extractors.
thank you!!
Sylvia

Similar Messages

Maximum Retail Price

Dear Gurus,
Is SAP CIN have this functionality? If yes then how it's function? How to capture Maximum Retail Price in PO? What configuration is required? Any standard report / form (eg: PO form or Sales invoice) display MRP information??
Appreciate any help here
Rgds
USN

Dear Lekhram,
I can see in J1IEX under "Miscelenious" tab there is a MRP indicator but no sure how it function.
Marketing will determine the Maximum Retal Price (MRP) and this information need to print in the PO form and send to vendor so that they able to have a product label with MRP info. And also would like to have control which the selling price should not above MRP and the MRP should print in Sales Invoice too.
Pls advise
Rgds
USN

Regarding BW standard extractor for material valuation ( MBEW and MBEWH )

Hi All
I would like to extract data from MBEW and MBEWH tabels to get material valuation information. Is there any standard extractor avaiable to fect this this information to BW? I have seacrhed forums , some one suggested to use 0CO_PC_ACT_05 extractor but they have also mentioned it would not fetct data from history table MBEWH table. I need to extract full information based on both the tabels for all the years.
Is there any extractor available?
Please advise
Thanks
Vennela

Hi Vennela:
We did not use any DSO from standard content. We created a custom write optimized DSO with the same key fields as MBEW.
We do a delete data and full reload every night.
Then we load 0MATPLANT from the DSO.
We also do a currency conversion to convert all prices to USD and load a custom attribute of 0MATPLANT to hold USD prices.
These material prices will get over written every day with the current valuation for that day.
Thats our data flow.
We did not have a requirement to hold history from MBEWH. you might be able to hold history within BW if you load the data into another DSO with a extra key field for the system date of the day you are loading data for.
Hope this helps.
Good Luck.
MP.

Retail Price

Dear Gurus,
I would like to seek your advise on Maximum Retail Price (MRP). Is it a standard process in CIN version? How to capture MRP in SAP/identified it base on the date of Purchase Order?
Regards
USN

Dear VIJAYESH V.V,
Could you guide me how to maintain MRP in the MM - PO creation and SD area.
How the MRP function?
Does SAP have any standard form (eg: PO form or Sales invoice) that capture the MRP information.
Rgds
USN

IPhone 4 'Full Retail Price"

Why is it that Verizon claims the iPhone 4's full retail price at $649 and $749 and the "discounted" prices at $199 and $299? The standard retail price for an iPhone 4 is $199 and $299. I can walk into any Apple store and pick up a 32gb iPhone 4 for $299 right now. So, why is this considered a "discounted" price by Verizon when, in actuality, I'm not getting any discount on it at all?

andersenl wrote:
Why is it that Verizon claims the iPhone 4's full retail price at $649 and $749 and the "discounted" prices at $199 and $299? The standard retail price for an iPhone 4 is $199 and $299. I can walk into any Apple store and pick up a 32gb iPhone 4 for $299 right now. So, why is this considered a "discounted" price by Verizon when, in actuality, I'm not getting any discount on it at all?
I'd like to see you go into ANY official Apple store and purchase an iPhone 4 OFF contract for the $199/$299 price. You "may" want to read a little closer when you are viewing those prices.
Feel free to go to http://store.apple.com/us/browse/home/shop_iphone/family/iphone and look at the little numbers beside the prices. You should see a "2", and when you scroll DOWN the page, you will then see this:
2. Requires new two-year wireless service contract, sold separately to qualified customers; credit check required; must be 18 or older. The iPhone model you purchase is configured to work only with the network technology of either AT&T or Verizon Wireless, as specified, but not both. Customers who want to upgrade from another phone or replace an iPhone 3G or iPhone 3GS should check with their service provider for pricing options or visit www.apple.com/iphone/buy. For those who are not qualified customers, are not eligible for an early upgrade, or wish to buy iPhone as a gift, the prices are $449 (8GB), $649 (16GB), or $749 (32GB). In CA, MA, and RI, sales tax is collected on the unbundled price of iPhone. Service may not be available in all areas or at the signal strength, rates, speeds, or bandwidth as demonstrated. Wi-Fi Internet access required for some features; broadband recommended; fees may apply. Some applications, features, and services are not available in all areas. Check with your service provider about network coverage in your area and international roaming options. Features vary by carrier. Warranty information available at www.apple.com/legal/warranty/iphone. When available, transferring your mobile number to a different service provider will terminate your service with your existing provider; termination fees and other charges may apply. Some features may require added fees. Contact your service provider for more details. Use constitutes acceptance of Apple’s software license agreement and third-party terms located in the iPhone box. Unauthorized modification of your iPhone software violates the software license agreement. Inability to use an iPhone due to unauthorized modifications is not covered under your warranty.
Pay special attention to the prices I've highlighted in red. Looks like their prices ARE correct.... and you are in(correct).

Is there any standard extractor for AFD provided by SAP?

Hi.
We are planning to implement SEM-BCS ? From this forum and SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
I think I missed good integration point SAP provided.
Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
So, there is no standard extractors for AFD.
IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
CoI - the most of data for it is accessible in ECC, even in RFD.
So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

I purchased a Maxx at FULL retail price (out of contract) to keep my unlimited data. An unauthorized/illegal change was made to the plan and all VZW could do was offer me $20 in credit.

As the title says:
I purchased a Droid Maxx at full retail price (approximately $540) to keep my grandfathered unlimited data. An unauthorized/illegal change was made by my younger sister (who is not an account manager and stole the information from my mom) to the plan and I was not notified within the 14-day closing period to revert the changes. For the record, both my mom and I are account managers, my younger sister is not.
I went in to my account (and changed all the information) and found out that when changes are made to the account online, you have to send an authorization text to one of the phones--however, you can send this authorization to ANY of the phones on the plan, so my sister sent it to hers (instead of an account managers).
So, the only reason I found out about this change to my plan was via a text message telling me I was "approaching max data," which of course should not happen with unlimited data. My younger sister did not tell anyone she made the changes.
When I found out about two (nearly three) weeks ago, I called Verizon to open a ticket about it. They did, said they would call/text me back a few days later--they didn't. One week later I made another phone call to see what the status on that ticket was--the rep said that the other rep was supposed to call me, but didn't, and so he pushed the ticket again. Lo and behold, another week later, still no response from VZW about the ticket. So I called again only to find out that the request to revert the data plan back to unlimited had been denied.
I spoke with that representative for nearly 40 minutes and all she could offer was some unwanted advice about what to do about my sister's behavior or that "I'm so sorry that someone would do that." I told her I wasn't looking for consolation, but for a compromise on either getting my unlimited data back, or refunding the difference between contract and full-retail price of the phone. I threatened to leave VZW because of this and all she could offer was a measly $20 credit.
I have filed a BBB complaint against Verizon Wireless for this issue as an illegal change that goes unnoticed past the 14-day closing period should be addressed in a more urgent manner.
I have also reached out on Reddit and Twitter, because obviously calling the VZW support does nothing to alleviate my situation. I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.

You seam to be focusing your anger at Verizon and not your sister. Verizon followed the rules and required IDs and passwords to access the wireless account. You and/or your mother are supposed to safeguard that information. Your sister has committed the felony by stealing your mothers identity for personal gain.
You say "I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.' My question to you is who made the illegal and fraudulent change to your account? Verizon or your sister? Keeping in mind your sister had all the correct IDs and passwords,
I'm sure if you went to Verizon and wanted to make some changes to your account, and you had the correct IDs and passwords, you would be upset and angry if they put you through the 3rd degree because they thought you were committing fraud.
Good luck to you, (seriously) whatever happens,

If I take my Iphone 5c to the apple store to be fixed with the service charge of $269, if they can't fix it do they replace the phone? Or will I have to pay retail price for a new phone?

I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?

They do not repair at all.
The replace.
The $269 is for a replacement.

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

How to enhance Standard Extractor for 0CUSTOMER_ATTR

Hi,
I need to enhance the standard extractor of 0CUSTOMER_ATTR in order to populate the newly added attributes.
I have few questions:-
1) Will there be any impact of manually adding attributes to 0CUSTOMER on the data flow/where used list of 0CUSTOMER.
2) In order to get the master data for newly added attributes we will need to enhance the extractor. Could you let me know the entire process of enhancing the standard extractor.
3) Will it be safe to make a copy of 0CUSTOMER as ZCUSTOMER, add the new attributes in ZCUSTOMER and use ZCUSTOMER for our requirement. In this case also we will need to enhance the extractor.
Your inputs will be helpful.
Thanks,
Naveen Kr. Choudhary

1) Will there be any impact of manually adding attributes to 0CUSTOMER on the data flow/where used list of 0CUSTOMER.
No there will not be any impact for the where used list of 0CUSTOMER info object, there will be effect once the enhanced data source is replicated to BI side.
2) In order to get the master data for newly added attributes we will need to enhance the extractor. Could you let me know the entire process of enhancing the standard extractor.
SE11 --> create the Structure
Tcode: RSA6 -> Double click on the Data source --> Now in the DS:customer version screen you can see the extract structure name --> double click on it -->Next you will find an option of Append Structure button --> click on it -->
Add the necessary field's in the Append Structure with Component Type:. Before you exit, make sure that you activate the
structure by clicking on the activate button.
Next
-->You need to confirm that the Added filed has been added to the DataSource and that it will be available to BW. When you go back at the Postprocess Datasource and Hierarchy screen(RSA6), select the same DataSource again and press the Change DataSource button .
Check for the filed that you had appended, it will be appeared at the bottom of the extract structure.
Once this is done now the appended fileds are ready in DS, now we need to populate the data from the corresponding tables.
For this Select the Data source 0customer_attr --> click on Function enhancement --> enter the project name and next enter the Enhancement RSAP0002 This enhancement has four components that are specific to each of the four types of R/3
DataSources:
Transaction data EXIT_SAPLRSAP_001
Master data attributes EXIT_SAPLRSAP_002
Master data texts EXIT_SAPLRSAP_003
Master data hierarchies EXIT_SAPLRSAP_004
With these four components , any R/3 DataSource can be enhanced suing the above 4 Function module. In this case, you are enhancing a Master data DataSource, so you only need EXIT_SAPLRSAP_002 .
Next we need ABAP developer in order to enahance the DS and write the logic to populate the values to the filed from the source table.
once this is done save the code and activate it.
Next fill the set up tables and Goto RSA3 tcode check the data source and check for the fileds that were appened are populated with the values or not.
(for more detailed steps our friend Chowdary has send u the links go through them)
3) Will it be safe to make a copy of 0CUSTOMER as ZCUSTOMER, add the new attributes in ZCUSTOMER and use ZCUSTOMER for our requirement. In this case also we will need to enhance the extractor.
I dont think there is a need for creating a new ZCUSTOMER , you can use the standard one.
Edited by: prashanthk on Aug 13, 2010 9:02 AM

How to improve the performance of Standard Extractors

Hi All,
Can you please let me know how to monitor the performance of Standard Extractors. For one of the extractor which have 350K records in source, it is taking 4hrs to load to BI.
I want to know which part of the program is taking more time.
Thanks in Advance
RK

No, that exception is thrown when the underlying
socket (tcp/ip) implementation cannot reserve buffer
space for new sockets afaik. I get it on windows
machines when the concurrent connection load reaches
17-18k connections. I do believe it's configurable
though.And what happens if your max server load is 7-8 connections an hour and you never close the connections?

Standard extractor for RBKP:Document Header: Invoice Receipt?

Hi gurus,
I need to extract from the table RBKP. Is there a standard extractor for this table? If not, what table joins would be best to create a generic extractor?
Thanks !
Chirayu

Hi Chris,
Check to see if this would be useful:
http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/content.htm
Hope this helps...

BUG IN SAP STANDARD EXTRACTOR

Hi Experts,
We are using the SAP Standard datasource 2LIS_11_V_SSL for populating the Service Level DSO.
The DSO has Sales order number, item number and schedule line number as primary keys.
The standard extractor is fetching incorrect delivery number for a combination of a order number, item number
and schedule line number.
For Example :
1. Sales Order Number 42739 has two delivery numbers 80020920 and 80027934.
2. The combination of Sales order number 42739, with item number 10 and schedule line 2 have been delivered using
delivery number 80027934.
3. But the SAP Standard extractor is displaying ( in RSA3 ) the above combination of order, item and schedule line
with delivery number 80020920.
Please consider this scenario and suggest some measures to fix or debug this issue with the standard extractor.
Thanks,
Uday

Reported to SAP Global Support and found to be error in SAP standard DS 2LIS_11_V_SSL for SAP BI AFS Versions.

Extraction from Standard Extractors in SAP-BW

Hi
How i can extracts data from standard extractors from R3 system to SAP-BW
like 0CUSTOMER_ATTR is standard extractors.
Regards
Atul
Edited by: AtulMohan Mishra on Nov 4, 2010 1:08 PM

There are standard steps for this...
1.Activate Dasasource in R/3 (RSA5)
2. Replicate DataSource in BW
3. Create Update rule / Transformations
4. Create Infopackages / DTP's and load data.
You can get details in any BW/BI book.
SSS

Some fields of standard extractor 2LIS_17_I3HDR are lost in the structure

Hi experts,
I need help with a case of a standard extractor, the 2LIS_17_I3HDR has selected some fields like GEWRK, GSTRP, GLTRP (when I saw it in the tx. LBWE) but this fields are not defined in the structure of the extractor, Anyone know why this occurs?. I send you an example of the case, thanks for any help that you can give me.

Hi Rosmar,
Have your system was upgraded previously?
This is the problem faced by many and SAP has provided a SAP note for this.
2042469 - 2LIS_17_I3HDR: Fields are missing after upgrade
This note explains exactly the reason of missing fields and how to retrive that.
Even if this note do not apply to your system (valid for SAP_APPL 605, 606, 616, 617) it is worth trying in your Dev system and check if it works.
Thanks
Amit

Retail Price Standard Extractors

Similar Messages

Maybe you are looking for