Retrieving Windows ID in Form

Hi,
How to retrieve user s windows authentication ID inside a pdf form opened in Forms Manager.
I have to retrieve user details and populate in the form based on the Windows ID.
Thanks in Advance
Srinath

Hi Kiran,
How to retrive the message id in to message mapping.
This can be easily achived by using a simple UDF and map it with message ID filed in target side.
Use the same piece of code given above.
Regards,
Pinangshuk.

Similar Messages

Application unable to open browser to retrieve and load a Form

An application I am running needs to open firefox browser to retrieve and display a form for authentication purposes.
I get message "Unable to access Internet" even though the browser is already open while I read the BBC news online.
I tried with Internet Security set to "LOW" then closed the firewall and then both but still get the same error each time. I assume I have to tell the system somewhere that this app is allowed to open the browser. Any suggestions greatfuly received.

Dear MOUNAF LAOUAD
There two most common reasons why windows do not open
1- Problems of incomplete initialization of Add-on in database:
(Do a back up of databse, and test forcing re initialization of the add-on)
- check financial add-ons landing page: root cause: problemms of installation (DATA BASE)
2- Missing deafult settings:
Like the deafult vat codes for sales and purchase, depending on localization, you must have them defined in Administration/setup/Fiancials/GL Account determination (Purchase-tax/Sales-tax) Note 770851.
Or having defined all the default GL Accounts' for Inventory (Even if you don't use them), in Administration/setup/Fiancials/GL Account determination
You might find tips of what is missingor going wrong in the log file :
- In 8.8 it can be found as described in note 1523686
-in 2007 can befoun see note 915589
Hope this helps your customer
Jose Antonio Castillo
SAP Business One Support

How to get names of all Windows in a Form Application at runtime

Dear All,
I want to get the name of all windows in a form module programatically at run time. How to get it?
Any help or comments will be highly appreciated.
Thanks in Advance.
Best Regards
Bilal

Hi Francois Degrelle,
First of all thanks for the response.
What if I have no items on a content canvas? In my application, I am using content canvas to hold the Image banner and help text of the current form, having no items at all. I am also using tab canvases to hold all items of form. The tabs are displayed on the content canvas at run time. So the tab canvases acts like frames (In my case).
Now if I am looping through items, it gives me the list of all of the tab canvases. Whereas the tab canvas always has no window assigned, as it is displayed on content canvas which has that Window which I need. Thus I am unable to get the names of windows in my case through the above stated procedure.
Another option could be if I can get the name of the content canvas upon which the given tab canvas is displayed?
Any way to do this or some other way to achieve the use case?
Any help will be highly appreciated.
Thanks in advance
Bilal

How can i save and retrieve blob data through forms and reports...

I have blob data type column and I want to save word, html, gif
document in oracle database through forms 6 and retrieve the
data into forms and reports.
Details : I want to open .doc,.html,.gif file through a button
and save it ..and i want retrieve the data into text item same
in reports....
If anybody have the answer then send me at
[email protected]

use ole container
initialize the container with the filename (doc or gif)
Edited by: arshid on Feb 8, 2009 1:57 PM

WEB.Show_Document(POP Up Window In 11g forms)

Is it possible to open a Http inside the POP Up Window In 11g forms.
This is what i tried to use:
Created a Dummy Window,dummy Canvas and by clicking the push button i gave this message:
web.show_document('http://www.google.com','Html_Window');
WEB.Show_Document will open only in seperated window but i need to open in the Pop Window is it possible please help on this.

As Denis mentioned, you cannot show html content natively in a form. You would need a bean to do that. However, if you are just trying to create something that looks like a standard browser pop-up window, there are several ways to do it. Be aware however, that in some cases, the following example will not work if you are using an older JRE. The latest JRE is 1.6.0_29 and runs the following code correctly assume the browser is not set to block pop-ups.
EXAMPLE 1:
web.show_document('javascript:window.open ("http://www.oracle.com","myPop","location=no,toolbar=no,menubar=no,status=no,resizable=yes,height=600,width=600");self.close();');
EXAMPLE 2:
Declare
     inJS      varchar2(32767);
Begin
     -- More info about window.open here:
     -- http://www.w3schools.com/jsref/met_win_open.asp
     inJS := 'new_win=window.open("http://www.oracle.com","new_win1","menubar=0,location=0,toolbar=0,status=0,scrollbars=1,resizable=1,width=500,height=600");';
     web.javascript_eval_expr (inJS);
End;

How to maximize the MDI window in web form.

Dear all,
i am new to jdeveloper. i am using form 10g there is a problem which is not handle by me in forms.
i want to maximize the MDI window in web form.
can jdeveloper solve my problem.
i am new please anyone tell me step by step.
thanks
Muhammad Nadeem
[email protected]

Hi,
no. Please use the Forms built-in set_window_property maximize
Forms questions are answered here: Forms
Frank

Generic code to minimize all windows in a form

I want to write a procedure to minimize all windows in a form. This procedure will be called from a menu item.
This can be done by using SET_WINDOW_PROPERTY built-in by hardcoding window names in the form and setting the window state to MINIMIZE.
The requirement is, the code should be generic. So that, if it is called form the menu item, it will do minimizing of all windows in the current form.
Hope no form built-ins are available to get the list of window names in a form.
The requirement can be done by using FORMS The. I doubt it will not work for three tier architecture. Any alternate ways to get a solution?

You can loop through all blocks and items and collect the used window names.

Increase main oracle window size in forms 10g

I am creating a form in 10g. The form has a window and a canvas. I have given scroll bar for the canvas which has multiple blocks (so that a user can scroll within the multiple records) and a scroll bar for the window so that the user can scroll at the bottom of the page.
The main oracle window which displays the messages and errors (not my forms window) is not the full size, its a little small (there is white blank space at the bottom) and I want to increase its size to full so that the users may not necessarily need to use the window scroll bar.
Can someone please tell me how to increase its size?
Thanks.

Hello
I think that others user could have problems, above all, with 'SEPARATEFRAME=TRUE'.
Here a note from metalink:
Note:358468.1 How to Maximize the MDI Window correctly on Web showing the Status bar?
When you try to Maximize MDI window in to form using
set_Window_property(FORMS_MDI_WINDOW,WINDOW_STATE,MAXIMIZE) on web,
even though the MDI window appears as Maximized it is not actually maximized,
also it doesnt show the status cafe.
This issue has been explained in BUG#4944285 Known and 181100.1
Regards

Reader X, Windows 7, autofill forms wrong

Reader X, Windows 7, autofill forms wrong
I often use pre made forms at work in Reader X. I have auto complete turned on to basic and save numerical is checked, though I rarely use the same numbers.
I think this started with the an update of Reader a few months ago, but when I am typing in numbers in forms sometimes it will not take what I typed, it overrides it with a previously used item. Sometimes I am trying to enter say, 1214, it will start autofilling other numbers after I type the 2 and if I just keep tying it still takes the autofill number even if I ignore it. The only way to get the correct number is to let it auto fill then go back and correct it and delete the ending characters that it filled in.
I did not create the forms I'm using, they are provided by my state and I cannot modify them.
I searched the web and the forums here and didn't find anything.

I am having the same problem but I don't think it has anything to do with the permissions or account information. This just started out of nowhere a few weeks ago. I tried installing a few older versions of adobe but I either get the same message, "An internal error occurred." or a different error message. I have attached a screenshot of the error message I keep getting. I also tried running the repair options via the control panel but that did not work. I can't change any settings within the program as each time I try to open it I immediately get the error message. I have uninstalled and installed adobe several times and there is no change.

Error in Trace: TopLevelNavigation.PrintNode: Fail to retrieve window info

Hello,
When I look into the default trace, its filled with this particular error:
"TopLevelNavigation.PrintNode: Fail to retrieve window information (node might be of type folder)".
Could anyone please let me know why this is showing up all over the trace?
Thanks,
Ajay

Hi WInson,
This is related to SSO configuration.Check SAP Note 1413903
Regards,
Javed

Want to close internet explorer window on exit form (10g)

i am using oracle 10g forms, want to close internet explorer window when exit form automatically.
Have alread tried calling html page at exit form and using closing window script for this, but didn't work.
Please help and describe in detail how to debuge and test every thing is ok
Aslam

Hi Aslam
Try following the instructions here
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3767372347328447221::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,201481.1,1,0,1,helvetica
Worked a treat for me.
paul

Can I retrieve a copy of forms that have been submitted using Forms Plus? I want to be able to file the actual form.

Can I retrieve a copy of forms that have been submitted using Forms Plus? I want to be able to file the actual form.

You can export any response as a PDF, which you can then archive.

Running form window behind window of calling form

Hello,
i have one form which has a maximized window. This form is calling a form using call_form/no_hide which displayes a small window in front.
When the user clicks on the maximaled window, this window raised in front of the small window, but the running form is still the small window.
How can i prevent that the position of the small window is behind the maximized window?
Robert

Set the property "Modal" of the Window in the form to "Yes"

Two different main windows in one form?

Hello -
I have a requirement to print a list at the end of an invoice printout. The invoice can cover multiple pages, and the secondary list can also cover multiple pages, one page per material. So essentially I need two different definitions of a main window. I tried defining my form like this:
Page...............Next Page.......Main Window
FIRST..............FIRST.............MAIN
LIST.................LIST...............MAIN_L
The first part prints fine, but I can't get the second part to print. I tried adding a command after the first main window to go to page 'LIST', but nothing in window MAIN_L will print. All the secondary windows on page LIST print, but nothing from MAIN_L.
Then I tried changing MAIN_L to be a secondary window and I can see my data, but in this case it will not allow me to enter the command to start a new LIST page.
Help! Is this even possible?
Edited by: Susanna Kohlmyer on Aug 20, 2008 2:39 PM

Try to create two Table Nodes in the Same Main window.
Like:
FIRST ... next is FIRST
.. MAIN
.... TABLE1
.......HEADER (table1)
.......MAIN (table1)
.......FOOTER (table1)
.... TABLE2
.......HEADER (table2)
.......MAIN (table2)
.......FOOTER (table2)
Regards,
Naimesh Patel

How To: create legaleze pop up window in pdf form?

Hello all. I would like to incorporate a pop up window with my company's legaleze for authorization to use our images in our customers marketing materials. The purpose of the legaleze is to inform the customers our policy on using our images in their marketing materials. The pop up would obviously contain two radio buttons (1. I Agree AND 2. I Disagree) Where if they agree they can continue to fill out the form and request images. But if they disagree they will not be allowed to fill out the form and submit it.
The form will be distributed via email, and be downloaded from our website.
The most important aspect of this is that the pop up window with the legaleze function properly. The secondary aspect of the form not being able to be filled out if they disagree is not as important. Obviously if I see that they disagree, I will not release the images.
Thanks for your help!

Adding layers to a PDF is a new feature in version 9 (you can work with layers in version 8, but have to add them in InDesign).
In 9, add the layers Navigation Panel (View>Navigation Panels>...), then click the gear symbol and choose Import as Layer, and select your PDF with the legal agreement.
You can control the layer visibility with a button action (one action is "set layer visibility"), and JavaScript can be used to show or hide buttons. So your accept button would have two actions, one layer visibility action and one execute JavaScript action that controls field visibility. A field called Name is controlled by changing that button's display property (hidden/visible):
var a = this.getField("Name");
a.display = a.hidden;
etc.
For more JavaScript info, check here.

Retrieving Windows ID in Form

Similar Messages

Maybe you are looking for