Return item to blocked stock (Movement type 531)

Hello. I have a question.
In my Bill of Material, I have an item with a negative quantity; this is so when I confirm a Production Order, the component, instead of being backflushed (MvT 261), instead, it is returned to stock with Movement Type 531.
My question is, how can I determine that this item is always returned to Blocked Stock instead of Unrestricted Use Stock?

In my Bill of Material, I have an item with a negative quantity; this is so when I confirm a Production Order, the component, instead of being backflushed (MvT 261), instead, it is returned to stock with Movement Type 531.
My question is, how can I determine that this item is always returned to Blocked Stock instead of Unrestricted Use Stock?
If you maintain negative quantity in BOM, then system will post 531 movement type only when you confirm the production order. If you want to post that stock to blocked stock always automatically it is not possible. You can activate 04 inspection type. Then stock will be posted to quality after Goods Receipt. From quality you can change to blocked stock. This is one way to shift to blocked stock.
If you want to post 261 movement in production order while confirmation you activate back flush option in MRP-2 view of that material master. Then while confirmation automatically 261 movement is posted by the system.
Regards,
KrishnamurthyDSS

Similar Messages

Sales order stock to block stock - movement type?

hi
what is the movement type from sales order stock to block stock?
thanks

first a mvt 414 to move the stock from sales order stock to storage location, then a 344 to move it from unrestricted to blocked.

MB51 - Movement types 531 and 945

Hi To All,
in MB51 i have two movement types 531 and 945. my customer want that this two movements behave like the 101 so with the stock category Q for Quality.
i tried OMJJ but i cannot find where to indicate the quality stock.
can you please suggest?
thanks C.

Hi,
Yes thats right for receiving inspection you need to use inspection type 01 in the quality view inspection set up tab in the material
master which will then flow to delivery tab in the PO as Quality stock and when you do MIGO it will deafult from PO
But to clear it from Quality inspection you will have to maintain Qaulity master data like ispection plan and Q info record
Thanks
Diwakar

How to change movement type 531 for by-product ???

Hi,
While creating production order (CO01), by-product component with negative quantity is automatically assigned movement type 531. Can anybody tell how this movement type is picked automatically ? How can it be changed to some other movement type (say Z31 i.e. copy of movement type 531) ?
Thanks,
Bijay

Hi Bijay,
It might be better if i share it with you.While creating the order SAP automaticallly assigns the movement type.The order created is of Devlopment class CO and GI-BY-Order is by default 531.
As you were talking about.SAP has provided us the transaction OPKA to adjust if the change is required.So please give it a try.Hoping it be you help.
Have a best day ahead.

Auto TO for movement type 531 - Receipt By Product

Hi All,
I have assigned a sloc to WM to make it WM managed sloc , now after doing a MB1A for an Internal order for movement type 531 , i am getting the Transfer requirement created in background for the material doc , but not the TO. Infact the automatic transfer order creation is activated for the movement type , but the automatic TO is getting created automatically for other existing sloc's .Any idea am i missing any configuration ?
Reg
Benny

Hi,
This topic has been dicussed many times on this forum. Please find information on SAP online help:
Auto TO for TR
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htmA
Auto TR for OD
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
Immediate TO
Please check OSS note 566090
Maybe you are looking for immediate TO...
Regards,
Csaba

Best way to block/deactivate movement type

hi gurus
I want to block the movement type 561 for all plants in Company.
I know we can remove the allowed transaction through tcode OMJJ but I wanted to know if there is another way to block this movement type for use.
thanks

Hello Cyrus,
The first option you already know, remove transactions from mvt type, but you never know that infuture you may require to do some transaction with 561/562 i.e. change UoM, Batch activation/deactivation etc.
The second and best option is control by authorization. This is very good option as you need not to take care any other configuration. Include this authorization prevantion in std SAP role and assign to all SAP users except the user to whom you want to give authorization for 561.
The third option is account assignment. Assign account modifier key with some odd name i.e. ZZZ and do not configure account assignment for this combination in OBYC transaction, but I will not recommand this one as some of the transaction will not require account modifier key.
So either use Authorization or remove transaction code from mvt type.
Hope this helps.
Regards
Arif Mansuri

Amount on Goods receipt for return orders is wrong with movement type 653

Hi All, I am sorry if it is a simple question because i am an abap'er.
My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) - PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
The next scenario is if the material is returned? This is where we are having issues
Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
I even tried changing the schedule line category to DN but no help.
I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
My pricing settings are good.
It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .

Have a look at any of the following notes:-
1) Note 171989 - Sales-order-related productn: Custmr exit COPCP002
2) Note 520000 - FAQ: Valuated special stocks
3) Note 557582 - User exit and valuated sales order stock
4) Note 580228 - Incorrect prices for materials procured externally
5) Note 983193 - Docu:Externally procurd material in valtd sales order stock
thanks
G. Lakshmipathi

QM Quality Module - error in transfer insp to blocked via move type 350

QM Notification - Additional Functions in Action bar - error in Insp to blocked (movement type 350)
We are trying to implement the movement of goods from inspection to
blocked stock through QM. We have added an item to the action bar and
are using movement type 350.
We have implemented several inventory transactions via the action bar in Quality notifications. All the transactions work except this one. We get the message "Must change Inspection Quantity in QM system". This is Movement type 350. The Inspection to Free (Movement type 321) works fine, as do Blocked to Inspection (type 349) and Free to Inspection (320).
Has anyone encountered and resolved this?

Dear LudovicBento
You cannot run this FM as QM stock can be moved only by QA11 tcode. You may try to create a BDC to post the material
from Quality
Regards
Gajesh

Unable to create Vendor return delivery from blocked stock

Hello,
Would like to know how to enable delivery picking from blocked stock.
Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
Next use VL10b to create delivery document against this PO. We are able to create delivery & PGI from blocked stock.
All above steps are executing seamlessly without any issue In our QA system.
However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
Look forward to some good responses.
Thanks,
Ram

Prerequisites
When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
Suggest data to simplify data input (for example, the storage location)
Check that the returned quantity does not exceed the delivered quantity
Reduce the quantity delivered to date
Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

Inspection lot creation for Movement type 531

Dear experts,
following is the procedure
1) Material enter against purchase order SFG
2) Quality checks that and send to unrestricted (its an sampling inspection)
3) Issue this material against production order
4) order is confirmed and GR is done for FG
5) FG material goes to quaity for inspection
6) At the time of inspection of FG it is found that FG is rejected because of vendor material
so we keep that stock in blocked stock. now we create an salvage order by CO07 and issue FG and received SFG vendor material by 531 movement
now my prob is i want to record the defect against vendor material because of which it is rejected and my clint wants the report on reson basis
regards
Sachin

go to OMBS... Here you need to do two things..
1. control reason..here u can mention reason for movement for 531 is requied or optional etc..
2. reason for movement..here u need to maintain the reasons as per ur wish..
like 101---damaged
107--- scratched
etc..
If all these are set, then only you can enter the reasons in the MB11 screen and the same can be viewed in MB51 by adding the reason in the layout...
karthick
Edited by: karthick PP on Jun 4, 2009 5:21 AM

GR Purchase Order to Blocked Stock / Inspection Type 01

Hi all,
I want to receive 100 KG of Material X from a purchase order: 95 KG to Quality Inspection Area and 5 KG to Blocked (Stock Category S)
For the 5 KG to be received to the Blocked Stock, I used movement type 103, the material was received to "GR Blcoked Stock".
Then I used movement type 105 to release it. I chose Stock Type "Blocked".
After posting, the material was received to "Quality Inspection Area" and NOT to Blocked Stock. I think the reason was the Inspection Type 01 was activated, so the material was received by default to Quality Inspection Area.
How can I receive a material directly to "Blocked Stock"?
Regards,
Kifah Yacoub

thank you, but it seems you misunderstood my question.
What i want is: How to receive from purchase order to Blocked Stock (Stock Category S).
I tried movement type 103, but it's not exactly what i want.
Thank you

Gr Blocked Stok or blocked stock Stop type setting in OMJJ

Hi,
Movt. Type 103, used to post material in GR blocked stock, just want to know what setting in OMJJ for movement 103 used to POST Material stock into GR Blocked Stock only.
Edited by: V raj on Aug 27, 2009 3:08 PM

Hi Raj,
After u enter the movement type 103 in OMJJ , in the first screen u will find Internal Control -- GR Blocked Status (S).
Regards
Ramesh Ch

Blocked stock movement through Notification

Hello QM gurus
My client requirement is as below.
When material is in blocked stock & it need to move to unrestricted QM user will raise a notification assign a task that material need to moved to Unrestricted from blocked stock.then intimation or Mail should be trigger to FICO person that QC has approved to move the material to UNR from blocked stock & FI person need to create debit note.So FI person will create DEBIT note & then he will enter a Task & some long text in notification.Then He saves the notifiaction.After saving notification material should automatically moved to Unrestricted status i.e. movement 344 should happened in background.
Is there any function module availabe?and how to mapped this scenario in SAP?
Your reply is appreciated & awaited.
Thanks
Pravink.

here u may require the help of an Workflow consultant for msg trigerring, rest of the problem easily solved through inspection lot an dnotif.

Return (122) for 107/109 Mov Type

Hello,
After research in SDN forum I didn't get any confirmation on my question. I can I not perform a return to vendor with 122 for movement type 107/109? Effectively is not in OMJJ, but shouldn't be a standard behavior allowed?
Iu2019m able to do it for 101 and 103.
Thanks in advance.
Tania

Hello,
Thanks for your answer but we cannot use 103 and 107 and I will explain way:
We can use CIF or FOB.
In CIF you should use 103/107 because the financial posting is only performed at the 107 when the responsibility of the purchase and transportation is from the vendor/freight forwarder (FF) side until you receive the materials at the final destination.
In FOB is different, we need to use 107/109 because the responsibility of the vendor finish when he deliver the materials at the customs in the origin country. Then FF ship the goods until the final destination. With this incoterm the purchase need to be recognized in financial side and the invoice can be posted to vendor before 109 is confirmed.
So we are not able to change our procedure regarding each movement type choose, because need financial reflection. What I do not understand is why I cannot return materials to 109 with 122.
Thanks in advance.
Best regards.

Stock movement type-301 issue

Hi, stock r moved frm 1 plant to another.
then how to update costing of the material maintained for one plant , for the other plant.
scenario is: one plant is procuring , then it is sent to another plant for manufacturing and from thereon it is despatched.
thanx
sourav

Hai Sourav,
                301 - M.Type is Transfer the material one plant to another plant.
              1. Material is same.
               2. Location is different.
                3. how to valuate the material for valuation area
                 ( Plant ) that is important.
                4. Example Material 'A' Plant is 0001 and 0002.
                 5. In 0001 - value is 100
                 6. in 0002 - value is 110.
                 You are maintain Like this.
Now you want to transfer the material form 0001 to 0002.
Qty - 1000.
The Accounting Effect is   Dr. 100000
                                      Cr . 100000.
In transfer posting What is the Value of from area system considure that Price Only.
regards,
Rajan.

Return item to blocked stock (Movement type 531)

Similar Messages

Maybe you are looking for