Returning error messages from media server
My application requires that I can get detailed feedback from
the FMS upon a given failure. For instance, if I try to open a
stream who's file does not exist, is it possible to have a message
or error code returned to Flash so that I can deal with the problem
accordingly (in this case display some text that says "stream not
available or similar)?
From my experience, the only messages that get returned are
success or failure messages but nothing specific.
quote:
Originally posted by:
ysv
For instance, if I try to open a stream who's file does not
exist, is it possible to have a message or error code returned to
Flash so that I can deal with the problem accordingly (in this case
display some text that says "stream not available or similar)?
Look in the docs under the netStream class, and it's onStatus
method. If a stream is not found, the onStatus returns
netStream.play.streamNotFound as the code. You just need to have
your netStream's onStatus method fire off your events.
Similar Messages
-
Database Connection Error: Cannot obtain error message from the server
I have a SQL statement that wants to add a temp table to the database. The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM Employee
WHERE EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H. -
Error message from Application Server
Hi All,
Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
Thanks in advance,hi,
it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
we can see all the application server files in this Tcode: AL11 -
Error Message from Oracle server while a procedure calling from VB
hi,
when i am calling a procedure some time an error is comming and most of the times the program is working properly. the error showing is as folows
ORA-06550: line 1, column 7:
PLS-00306: wrong number of type of arguments in call to 'PRO_PandL_Exp1'
ORA-06550: line 1, column 7:
PL/SQL:Statement Ignored
i am expressing my extreem thanks for trying to help me and solve the problam
the procedure i written is
CREATE OR REPLACE PROCEDURE PRO_PANDL_EXP1
(companyid in number, Stdate in varchar2, enddate in varchar2, YEARID in number, p_recordset OUT SYS_REFCURSOR ) AS
sdate date;
edate date;
begin
sdate := to_date(Stdate,'dd-mon-yyyy');
edate := to_date(enddate,'dd-mon-yyyy');
open p_recordset for select NVL(sum(dr),0) AS DR , NVL(sum(cr),0) AS CR , NVL(sum(opamt),0) AS OPAMT,
NVL(sum(balamt),0) AS BALAMT, group_name, ORDER_TO_PRINT, GROUP_LEVEL,
TR_PL_BS_FLAG, ag.GROUP_ID, head_status as Head_id, Head_name,
nvl(Details.GROUP_NATURE, ag.group_nature) as GROUP_NATURE,
nvl(Details.parent_id1, ag.parent_id1) as Parent_id1
from (
(SELECT SUM(nvl(MONTHBALANCEAMTDR, 0)) AS DR,
SUM(nvl(MONTHBALANCEAMTCR, 0)) AS CR,
SUM(nvl(OPBALANCEAMT, 0)) AS OPAMT, SUM(nvl(balance,
0)) AS balAmt, group_id, DTL.head_id,
DTL.head_status, DTL.head_name,
DTL.GROUP_NATURE, parent_id1
FROM ( SELECT SUM(nvl(MONTHBALANCEAMTDR, 0))
AS MONTHBALANCEAMTDR,
SUM(nvl(MONTHBALANCEAMTCR, 0))
AS MONTHBALANCEAMTCR, SUM(nvl(OPBALANCEAMT,
0)) AS OPBALANCEAMT, SUM(nvl(balance, 0))
AS balance, groupdetails.group_name,
groupdetails.group_id AS group_id,
groupdetails.head_id AS head_id,
GROUPDETAILS.HEAD_NAME,
groupdetails.head_status, PARENT_ID1,
ORDER_TO_PRINT, GROUP_NATURE
FROM (SELECT SUM(NVL(MONTHBALANCEAMTDR, 0)) AS MONTHBALANCEAMTDR,
SUM(NVL(MONTHBALANCEAMTCR, 0)) AS MONTHBALANCEAMTCR, head_id, HEAD_NAME,
group_ID, COMPANY_ID FROM (SELECT SUM(DECODE(DRCR, 0, (AMOUNT_IN_AED+nvl(CON_RATE_DIFF,0)),
0)) AS MONTHBALANCEAMTDR,
SUM(DECODE(DRCR, 1, (AMOUNT_IN_AED+nvl(CON_RATE_DIFF,0)), 0))
AS MONTHBALANCEAMTCR, AH.head_id,
AH.HEAD_NAME, AH.group_ID,
AH.COMPANY_ID
FROM federal.TRANS_DETAILS TD,
federal.account_heads AH
WHERE VOUCHER_DATE <= edate AND
VOUCHER_DATE >= sdate AND
AH.COMPANY_ID = TD.COMPANY_ID AND
AH.head_id = TD.head_iD AND
ah.company_id = companyid
GROUP BY DRCR, AH.group_id, AH.head_id,
AH.COMPANY_ID, AH.HEAD_NAME)
GROUP BY group_id, head_id, COMPANY_ID, HEAD_NAME )
transdetails,
(SELECT SUM(nvl((AMOUNT_IN_AED+nvl(CON_RATE_DIFF,0)), 0))
AS OPBALANCEAMT, AH.head_id,
AH.HEAD_NAME, AH.group_ID,
AH.COMPANY_ID
FROM federal.TRANS_DETAILS TD,
federal.account_heads AH
WHERE VOUCHER_DATE < sdate AND
AH.COMPANY_ID = TD.COMPANY_ID AND
AH.head_id = TD.head_iD AND
ah.company_id = companyid
GROUP BY AH.group_id, AH.head_id,
AH.COMPANY_ID, AH.HEAD_NAME)
OPENINGDETAILS,
( SELECT ah.head_id, DECODE(group_level, 1,
ah.head_id, 0) AS head_status,
0 AS BALANCE, accountgroup.company_id, accountgroup.group_id, parent_id2,
group_name, DECODE(group_level, 1, ah.head_name, ' ') AS head_name, ORDER_TO_PRINT,
GROUP_NATURE, parent_id1
FROM FEDERAL.account_heads AH,
(SELECT group_id, group_name, group_level, company_id, parent_id2, parent_id1,
ORDER_TO_PRINT, GROUP_NATURE
FROM FEDERAL.account_groups AG
WHERE AG.company_id = companyid and (GROUP_NATURE='I' or GROUP_NATURE='E' or GROUP_NATURE='P') )
accountgroup
WHERE AH.group_id = accountgroup.group_id AND
AH.company_id = accountgroup.company_id AND
AH.company_id = companyid) groupdetails
WHERE transdetails.head_id (+) = groupdetails.head_id AND
transdetails.company_id (+) = groupdetails.company_id AND
OPENINGdetails.head_id (+) = GROUPDETAILS.head_id AND
OPENINGdetails.company_id (+) = GROUPDETAILS.company_id
GROUP BY groupdetails.group_name, head_status,
groupdetails.group_id, groupdetails.head_id,
GROUPDETAILS.HEAD_NAME,
GROUPDETAILS.group_id, PARENT_ID2, head_status,
ORDER_TO_PRINT, GROUP_NATURE, parent_id1) DTL
GROUP BY group_id, DTL.head_id, DTL.head_name,
DTL.head_status, DTL.GROUP_NATURE, parent_id1)
UNION ALL
(SELECT DISTINCT
0, 0, 0, 0, accountgroup.group_id, 0 AS head_id,
0 AS head_status, ' ' AS head_name, GROUP_NATURE, parent_id1
FROM FEDERAL.account_heads AH,
(SELECT group_id, group_name, group_level, company_id,
parent_id1, ORDER_TO_PRINT, GROUP_NATURE
FROM FEDERAL.account_groups AG
WHERE AG.company_id = companyid and group_level<=2 and (GROUP_NATURE='I' or GROUP_NATURE='E' or GROUP_NATURE='P') ) accountgroup
WHERE AH.group_id = accountgroup.group_id AND
AH.company_id = accountgroup.company_id AND
AH.company_id = companyid AND
accountgroup.group_id = ah.group_id ) ) Details,
account_groups AG where Details.group_id (+) = AG.Group_id and AG.GROUP_LEVEL <=2 AND
ag.company_id = companyid group by
group_name, ORDER_TO_PRINT, GROUP_LEVEL, TR_PL_BS_FLAG, ag.GROUP_ID,
head_status, Head_name, Details.GROUP_NATURE, Details.parent_id1 , ag.GROUP_NATURE, ag.parent_id2, ag.parent_id1
order by parent_id1, GROUP_ID, ORDER_TO_PRINT, head_status, head_name ;
end pro_pandl_Exp1;
Thank you
Bosemonprakash wrote:
Hi all,
DECLARE
l_conn UTL_TCP.connection;
BEGIN
l_conn := ftp.login('Destination Ip address ', '22', 'Username', 'Password');
ftp.ascii(p_conn => l_conn);
ftp.put(p_conn => l_conn,
p_from_dir => 'MID5010_DOC1TEMP', -- Oracle Directory name from where we need to copy a file
p_from_file => 'Hipaa.33KM.5093.06152011130146885.834.O.irl',
p_to_file => '/qatest1/mihipaa5010/mj5010/DevelopmentStage/working_directory/Outbound/Data/75061252/Hipaa.00AN.07262011173844778.820.O.copied.irl'); -- Directory of the destination machine where we need to paste
ftp.logout(l_conn);
exception
when others then
dbms_output.put_line(sqlcode || sqlerrm);
--dbms_output.put_line(l_conn);
END;We are getting the below error:
SSH-1.99-OpenSSH_5.1
-29260ORA-29260: network error: TNS:connection closed
Could any one please let us know why this error is raising...As sybrand correctly points out, this issue doesn't belong here.
You are using a 3rd party package "ftp" and the error it is indicating suggests the issue is a network issue of some sort.
We don't have the code of that package or know what it is doing, so please consult whoever supplied or wrote the package and/or your network administrators. -
Not supported: Cannot obtain an error message from the server on Win7
App is written against the RDC and runs fine on Xp, but on Win7 it fails when I change databases. Ie you can select from several databases from within the app. When doing so the app closes the RDC connection:
if (m_Application != NULL) m_Application.Release();
m_Application = NULL;
if (m_Report != NULL) m_Report.Release();
m_Report = NULL;
So that it is then reopened. This works fine on Xp, but not on Win7. I also tried the 11.5 Sp4 runtime. The ODBC log complain about an invalid handle.
I know that the RDC is deprecated, but I wonder if anyone else has run into this?Go to this link, and book mark it, and it will get you to our download page:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Select Crystal Reports Release 2 and then Service Packs
Thanks again
Don -
Database Connector error: 'cannot obtain error message from server'
I am using Oracle stored procedures and I have used IN parameters for input and INOUT parameter of REF_CURSOR TYPE for returning resultset in Crystal Report 2008 by using package. Now when I am trying to add the package in the Crystal Report, parameter input box prompts, I enter some values and gets Database Connector error: 'cannot obtain error message from server'.
But when I do not use INPUT parameters and use OUT parameter of REF_CURSOR type it runs well without any issues.
We are using ODBC connection for Oracle.
Kindly suggest.Hello,
Search the Knowledge Base for "oracle store procedures" and you'll find a document on how to write a SP so CR can use them.
Thank you
Don -
'Cannot obtain error message from server' when trying to use ODBC
Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments -
How can i dispaly an Error Message from Server Side To form
Hi All,
How can i dispaly an Error Message from Server Side To form side .
i try several ways nothing succed.
i put the error in stack and after call the procedure from form i added
Qms$Trans_Errors.Display_Messages;
and because it is an error not informantional error the error screen displayed and enter
in infinite loop acts like flashing .
can any one help me please i use C/S Headstart6i and Designer 6i
thanks alot
radihi,
thanks alot lauri.
yr code work only using information message but in error message its still the same .
the error window still flash and enter in infinite loop of executeing the same triggers.
thanks again
radi -
I loaded Digital Editions onto a second computer at home. When I try to download a book from the library I get the following error message: E_Act_Not_Ready, License Server Communication. Any suggestions?
Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?
-
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
Java - Axis2: How to get an error code / error message from the Javascript via SOAP
Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hansuser11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman.... -
CALL Transaction 'MIRO' return error messages in MESSTAB
Dear All,
We have created a test function module to call transaction 'MIRO', the function works fine on one server but the same give error messages on other server.
The messages returned by call transaction is as follows
======================================================
Messages retunrned by 'CALL Transaction MIRO' as on server I (success)
======================================================
1 MIRO SAPLMR1M 6000 I E F5 096 1,002,010.00 INR Advance to Vendors CTU
2 MIRO SAPLMR1M 6000 S E F5A 034 BusA CTU
3 MIRO SAPLMR1M 6000 S E M8 060 5200000423 CTU
======================================================
Messages retunrned by 'CALL Transaction MIRO' as on server II (error)
======================================================
1 MIRO SAPLMR1M 6000 S E F5 480 RE Doc. Header Text CTU
2 MIRO SAPLMR1M 6000 I E M8 584 CTU
3 MIRO SAPLMR1M 6000 S E F5 480 RE Doc. Header Text CTU
4 MIRO SAPLMR1M 6000 S E 7Q 333 1008473 CTU
5 MIRO SAPLMR1M 6000 E E F5 480 RE Doc. Header Text CTU
In fact, when the MIRO screen is displayed to user and user enter the data in MIRO and simulate, there is no error.
But when we post the transaction the screen is exited without displaying the invoice document number.
Where as if we call MIRO directly, it works fine without any error.
Kindly help.
Regards
Ruhi HiraThe sample code is
FUNCTION Z_TEST_MIRO.
""Local Interface:
*" EXPORTING
*" REFERENCE(ERRCODE) TYPE N
*" REFERENCE(INVOICENUMBER) TYPE C
*" REFERENCE(OLDINVOICENUMBER) TYPE C
DATA: BEGIN OF tran_opts,
dismode TYPE ctu_params-dismode VALUE 'A',
updmode TYPE ctu_params-updmode VALUE 'S',
cattmode TYPE ctu_params-cattmode,
defsize TYPE ctu_params-defsize ,
racommit TYPE ctu_params-racommit,
nobinpt TYPE ctu_params-nobinpt VALUE 'X',
nobiend TYPE ctu_params-nobiend,
END OF tran_opts.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
ERRCODE = 0.
GET PARAMETER ID 'RBN' FIELD OldInvoiceNumber.
DATA BEGIN OF BDCDATA OCCURS 1.
INCLUDE STRUCTURE BDCDATA.
DATA END OF BDCDATA.
CALL TRANSACTION 'MIRO' USING BDCDATA OPTIONS FROM tran_opts MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR,
MESSTAB-msgv1,
MESSTAB-msgv2,
MESSTAB-msgv3,
MESSTAB-msgv4.
IF MESSTAB-MSGTYP = 'S' AND MESSTAB-msgid = 'M8' AND MESSTAB-msgnr = '060'.
invoicenumber = messtab-msgv1.
ENDIF.
ENDLOOP.
IF OldInvoiceNumber = InvoiceNumber OR InvoiceNumber IS INITIAL.
ERRCODE = 1.
ELSE.
ERRCODE = 0.
ENDIF.
REFRESH BDCDATA.
ENDFUNCTION. -
Pacman : returning error 16 from alpm_db_update
Recently, yaourt behave oddly on my homeserver, outputting some truncated errors messages as if they were answers from a regex search. Long story short, I tried to fix the problem but did not yet succeeded, so maybe someone here will help me.
What I tried :
Use pacman instead of yaourt -> gave me a full error message "opening /var/lib/pacman/sync/core/dhcpcd-5.1.3-1/depends failed : No file or directory" . I am not sure the problem is package-related since I uninstalled and reinstalled it.
Moreover when I tried pacman with -Scc and -Syy I had an error message about the core database. Then, with -Syu and --debug option, I had this:
:: Synchronizing packages data...
debug: failed to get lastupdate time for core
debug: using 'core.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: connected to distrib-coffee.ipsl.jussieu.fr successfully
downloading de core.db.tar.gz...
Error: deleting core database failed
debug: returning error 16 from alpm_db_update : removing entry from database failed
Error: updating core failed (removing entry from database failed)
Any idea ? Thanx in advanceHave you already tried a different mirror?
-
Hi,
I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that says " Erroneous data received from server. Application may not work correctly".
What could be the reason ?
Thanks & Regards,
Venkatesh.Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen. -
Error Message from VM TMS 13.0
Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben LaiThis seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142
Maybe you are looking for
-
Magic Mouse with Windows 7 Boot Camp
I get that this discussion has been posted here and on other forums throughout the web. I still don't get it. My Magic Mouse works when I use Mac, but when I use Boot Camp Windows 7 Professional 64-bit I can't get it to install. The number 2 step peo
-
XDP in Adobe Form (Adobe designer)
Hi, Is it possible to find somewhere the XDP definition and specification ? I thinks Adobe delivered an help to know all metatags and other stuffs (for out-of-the-box). Best regards,
-
Mac OS 10.10, CS4: Error 150: 30 "License has stopped working"
I recently did a hard drive restore from Time Machine. I'm running OS 10.10 (Yosemite) and have worked my way through the recommended solutions to Error 150:30, as per the Adobe support site. However, none of them specifically point to OS 10.10- mo
-
Sun Java Messaging Server help.
I have currently running netsacpe messaging server on solris 7. I want to upgrade or change my mail server now. I am intrested in Sun Java Messaging Server 6. Here i have few questions in my mind. Will it only install on solaris 10 (linux not) ? Can
-
I cannot change the Maximum attachment size
When I open Server Admin, go to my server, click on Web, click on Settings and then click on Web Services I can then enter a new Maximum attachment size (the default seems to be 0). When I click Save the size goes back to 0. I am able to change the T