Reversing the GR for the LVA -Asset depreciation already Write off

Hi,
There are double GR and PO in one fixed asset which were being posted in the year 2008 .
Since the asset is a Low value asset, The depreciation had been completely written off last year itself and the value of the asset has become Zero.
I am now trying to delete 2 POs but  cannot delete in MR11 as the error message ' Net book value negative in area 01 - Asset affected. .
Kindly advise what should we do to reverse the PO in he current year.
Thanks
Manish

Click on the depreciation area and select the option negative asset values are allowed.
When the field is not there make it optional in the field status group AO21

Similar Messages

  • How can I eliminate the pop up for sms. I have already turned off Preview.

    How can I eliminate the pop up for sms. I have already turned off Preview.

    You can't with the current iOS.

  • Set Minimum amount for non LVA  Asset Class

    Dear all,
    Is it possible to set a minimum amount for asset classes other LVA asset class?
    Thanks & regards.

    Dear Jay,
    I didn't see a configuration setting to set the minimum amount for asset class even for LVA asset class - in LVA asset class we will specify the maximum amount only not the minimum amount. 
    I think through SAP standard setting this is not possible and may require some enhancements for this.
    Regards,
    Kiran Yelamarthi

  • How to get the menu-bar back if vertical tabs 0.9.4 is installed and the other bars were already switched off?

    there is no firefox-button anywhere
    in the adress-bar there is nowhere a free space where right-clicking works
    right-clicking in the (vertical) tab-bar doesn't do anything

    Hello,
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Who to reverse the OSV if it is reverse what is the future problem in SAP?

    Who to reverse the OSV (Asset) if it is reverse what is the future problem in SAP?

    CEE6 wrote:
    What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?
    You have to make a distinction between the container format (eg, AVI, MKV) and the video/audio format (eg, DIVX). For instance, without additional software, QuickTime can play .avi files with the IndeoVideo codec, but not .avi file with the DivX codec). Further, you have to make the distinction between what can be played using an independent player, eg, QuickTime Player, and what can be played within the presentation software (Keynote or PowerPoint).
    You can refer to
    <http://mac2.microsoft.com/help/office/14/da-dk/powerpoint/item/7acce321-36fb-48d 6-8c76-12cb3a0063ee>
    for suggestions. In practice, for presentation clips, I think you're limited to MPEG-2 and MPEG-4. I don't know if an additional MPEG-2 QuickTime component is required under Lion, you'll have to check that yourself. So, in the end, it's MPEG-4. Both Keynote and PowerPoint Win/Mac should be able to handle it.
    can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files
    What's a 'safe application'? And why do you have to buy it from the App Store (yuck!)?
    Handbrake, as mentioned by X423424X, is free and works very well. There are probably others, too.
    this forum is the best place to learn
    Perhaps, but it may not be the place to get answers to this question. Try a PowerPoint Mac user forum, they would have more experience in these x-platform issues. This forum is oriented more towards the hardware side of the MBP platform.

  • How to Reverse the Part1 entries

    Hello,
    We have received the Some goods, at the time of GR we choosed the option "Only Part1 entry"
    So in this case J_1IPART1 table updates the qty field and system will not generate any Doc NO(Internal Number) here.
    So we donot want to take the MODAVT for this material(bcz this is Diffence material). We want to cancell only PART1 entries from table .Bcz we were unable to reverse the goods( qty was already consumed).
    How to cancell the part1 entries, in these table there was no Internal number
    Note:  If material doc was not updated J_1IPART1 table, then we updated from J1I5 t.code, is there any option is there to reverse only Part1 entries.
    Regards
    Mahesh Naik

    Hi,
    1) If you dont want to cancel material document : In this case go to T. Code J1IS and select the option "delete" (a bin symbole made on menu bar). Then enter Internal No and year , then save it. But here you are saying while taking goods receipt Internal no is Not generated so i think this solution will not work for you.
    Through J1IS t.code cancellation was not possible, Bcz in this case we have no internal number
    2) Now you have to Cancel the material Document : Go to MIGo T. Code. and select " Return Delivey" Instead of Cancellation and with reference to Material document save the document. In this way material document will be cancelled and part One entry will be reversed. But make sure that in Configuration of Movement type of CIN is having 122 Mvt type
    We have checked in configuration there 122 mov type was available, if suppose we choose the rerurn delivery then system will reverse the goods(The perticular material doesnot have stock, stock is Zero). Is it reverse Part1 entry. then shall i go for One more time GR? how to do it?

  • Fixed assets depreciation wherein local and system currency is differeent

    Hi,
    We just have a question regarding the Fixed Asset Depreciation if Local and System Currency is different.
    Setup of Currency:
    Local Currency = USD
    System Currency = Peso
    During monthly amortization the depreciation is in Local Currency (USD) converted amount at the time of acquisiton if other currency is used. The corresponding system amount which is in Peso will use the FOREX rate based on the posting date of the depreciation run.
    What we want is to maintain a correct lapsing schedule of Fixed Assets in both PHP & USD, and both following the accounting standard.   Therefore, to be in line w/ the standard, we have to use the historical rates.
    Is it possible that when the depreciation was posted in system currency the historical or the acquisition rates will be used not the conversion rate when the depreciation was done?
    Thanks,
    Janice

    Hi Janice,
    I don't think that is possible to maintain system consistency.  if you could assign FOREX arbitrarily, what is your accounting principle?
    Thanks,
    Gordon

  • Write off asset under construction

    we have one AUC, we have create a PO for this AUC, the AUC has amount of 200K USD, we haven't transfer it to fixed assets, how to write off the AUC, (we want to completely write off  this AUC, because the company code which creates this AUC going bankruptcy), I tried ABAON, ABAVN, but this is specific to asset, asset under construction can't be used. any idea? thanks

    Hi,
    1)  AIAB - Distribute  (update a rule with G/L settlement with a GL account for 100%)
         AIBU - Settle (Execute settlement)
    Or
    2)
    Posting direct FI entry.
    FB01
    Debit 40 posting key GL expenses to which you write off,
    Credit 75 posting key Asset #
    Best Regards,
    Madhu

  • How to reverse the Depreciation for the excess amount posted?

    Hi Gurus,
    We have uploaded the data last month from legacy system to SAP as below.
    The Fiscal year is Jan - Dec and gone live on June 28th 2009.
    Accumulated Depreciation was taken till Dec 2008.
    Ordinary Depreciation was taken from Jan 2009 to June 2009.
    But Ordinary depreciation is not up to date in SAP as the user miss out the 2 months depreciation for each Asset but this was already posted in legacy system. All the GL Balances have been uploaded as per the legacy system. Now system is taking the previous 2 months Depreciation along with the current month. If we run the Depreciation for the current month, the system will post excess amount as it includes previous 2 months Depreciation.
    Can any one kindly suggest the process to reverse the excess amount after Depreciation posted for the current month?
    Thanks much for the help.
    Early responses will be appreciated.
    Best Regards,
    JBC

    HI
    Few clarifications-
    1. you have posted two months dep in legacy , have you transferred that dep amount wth the ordinary dep transferred from jan to june?
           If yes, that means your last posted dep month is june and accordingly you have to set the last period (6) in the SPRO for asset data transfer specifications, so system will start calculating dep from the 7th period only and will not recalculate dep for last two months.Check the last posted period mentioned in SPRO.
    2.If you have uploaded wrongly your ordinary dep for current year , then that means your Asset accounting opening balance (migrated balance ) is not matching with your Trial GL upload as well, so you need to correct your asset accounting opening balances.
         For this you need to reset your company code status from 0 to blank ( tset data always allowed for asset data transfer). And then correct the values for current year ordinary dep posted from jan to june, also check the last posted dep period as above.
    3.However you may post writeup ttype 700 to adjust the excess dep posted by any reason, you can extract last two months dep posted values asset wise from legacy system if already posted, and post the writeups for the same value in current period using LSMW.
    Cheers
    Mukta

  • Depreciation posted for the wrong asset class

    Hi Experts
    An asset was posted for the wrong asset class. Invoices for this asset were already posted and depreciation was posted for several months. Now we realize the mistake and want to correct it. How can we reverse the origanl documents including the depreciation and post it to the correct asset class accounts?
    Thanks
    Ofer

    Hi Ofer,
    you can transfer the depreciation to the new asset. Why you want to reverse th edepreciation?
    Generally depreciation can not reversed. If you want to reverse the depreciation you can enter depr. key "0000" and make a repead run. In that case the depreciation will be reversed (posted oposite) for alle open fiscal years.
    regards Bernhard

  • How to reverse the posted depreciation for a particular period..?

    Hi Experts,
    Please solve my problem, that my client users are changed the depreciation key in last month as per legal requirement. While changing the depreciation key they select the wrong depreciation key and run the depreciation in AFAB. But after running the depreciation they came to know that amount is wrong because of the wrong depreciation key. So now they want reverse the entry for last month only and post the new entry with changed depreciation key.
    Please give me advise how to reverse depreciation for only Last month. That should effect the all previous posting.
    Regards
    Narendra

    Hi,
    Depreciation Posted of only of the Previous Fiscal years
    can be reversed using ABZU Write-Up.
    ABZU -->Reverse the Past
    Dep. For current depreciation reversal you have no alternative except reversing
    co code depreciation document posted using OAGL and then repost it.
    Regards

  • Create new depreciation class for the existing asset

    Dear Experts,
    Please explain step by step:
    1. How to create a new depreciation class for the existing asset
    2. How to make a asset transfer to the new asset in the new asset class?
    Thank you in advance

    Hi,
    The pre-requsit of creating a new assets clause :-
    1. Co. code assigned to Chart of Dep.
    2. Dep areas have been defined
    3. GL account no. is not more than 8 digit.
    The transfer of an assets within the same co code can be done thru T.code ABUMN.
    Award if helpful
    Sunil

  • Reverse the depreciation for 2010

    we  have few assets  which has been  started  depreciating on 1st Jan 2009. Client want to reverse the  Depreciation of 2010 in Non leading ledger only. The useful life of the asset still same 15 years.Can you gurus give me some lead on this please ?
    Thanks
    Satya

    Hi
    there is no way to reverse depreciation.
    Blaz

  • Error while reversing the asset accounting document through t code AB08

    Hello All,
    i have one query where the user has scrapped the assets through T code ABAVN in the month Dec 2009 with doc date of Nov 30th 2009. Now he realised that the posting was wrong and he wants to reverse it in 1st of Jan 2010 with the t code AB08. when we click on the reverse button in t code AB08, system is by defaultly taking the fiscal year, posting date and period, only we need to give the reason code. here user is trying to give the reversal date manually and making the posting. Now system is giving an error "Reversal in different fiscal year is not possible" with the message AA487.
    we are using SAP ECC 5.0 and i got SAP 1393737 for this and it is mention that there is a program error and needs to implement the program corrections.
    Please can any one suggest me, is that correct approach or should i need to follow the another work around to resolve this issue.
    Thanks in advance.
    Regards,
    Venkat

    Reversal in different fiscal year is not possible in the Standard        
    system since it will affect your balance sheet and other accounting      
    legal report.                                                                               
    It is not possible in FI-AA to reverse       
    a document in this way,  "because of the calculation of depreciation"                                                                               
    The reasons are:                                                                               
    1. The reconciliation of FI and FI-AA must be ensured, and therefore     
       Posting and Asset Value Date must be in the same fiscal year.                                                                               
    2. Depreciation of aquisitions posted in the previous year, are          
      not automatically corrected, when you post a reversal.                                                                               
    One way is to open the previous period(previous fiscal year) and post    
    the reversal to the same fiscal year. PLEASE NOTE THIS IS ONLY IF YOU    
    HAVE NOT EXECUTED YEAR END CLOSING TRANSACTIONS.     
    Blaz

  • Reverse Asset Depreciation for Closed FY

    Hi Asset Gurus...
    Need your expert advice...on the following Asset issue....
    PROBLEM : We have done the Year end closing for FY 2009 for our assets in Jan 2010. But we have already reported out Balance sheet in Dec 2009 for FY 2009. Now, when we have closed the FY 2009 in Jan 2010, system postes some financial entries related to Depreciation difference between area 01 and area 02 on the balance sheet.
    Now the business thinks its not acceptable..as what we see in SAP for the BS 2009 contradicts what we have already reported to the authorities..
    So, we need to change this situation in SAP...i.e. correct these postings ( or infact cancel these postings that have happened due to this depreciation difference between area 01 and area 02 in the Fy 2009 ) so that the BS 2009 shown in SAP would match what we have reported.
    Now the real problem is that : THE ASSET FISCAL YEAR IS ALREADY CLOSED AND ALSO WE CANNOT MANUALLY POST ANY FI ENTRIES FOR THESE DEPRECIATION DIFFERENCE GL ACCOUNTS AS THEY CAN BE POSTED ONLY INTERNALLY.
    SOLUTION THOUGH OF : Now, We see that probable solution would be re run the Depreciation for FY 2009 again by opening period 12 2009 so that the depreciation differences calculated wrongly would be gone.( But is this kind of suggested or acceptable ).
    In the Other case, should we do an ASSET WRITE UP OR TRANSFER POSTINGS to negate the postings that have already happened.
    One more thing..I want to clarify is that : THE REASON THE DEPRECIATION DIFFERENCES OCCURRED BETWEEN AREA 01 and AREA 02 is because both of them had a different depreciation key in FY 2009( somehow they had diff. dep keys which was wrong as told to us by the business and they discoverd this situation in 2010 ). So, we corrected the Dep keys for the two areas in FY 2010 ....But for the FY 2009 , when we closed the FY 2009, the depreciation differences already got posted in the Balance Sheet.
    REAL PROBLEM IS THAT WE WERE ABLE TO CORRECT THE DEPRECIAITION KEYS IN THE ASSETS, but WE WANT TO CORRECT THE WRONG POSTINGS THAT HAVE TAKEN PLACE IN FY 2009 ( i mean the Financial postings that took place.. the GL accounts that got posted are Acc. depreciation difference account and dep. difference account ).
    We also cannot manually reverse this FI entry , as these postings happeend automatically..
    So i see..probable solution is reopen the FY 2009 and carry out a repeat dep run ??
    Or do a ASSET WRITE UP OR TRANSFER POSTNGS FOR THESE GL ACCCOUNTS?
    I am not an expert myself but seek the guidance of the experts here to resolve our issue..
    In case, you need any more clarification on this problem..I will let you know the same...
    Waiting for your feedback on the same..
    Thanks,
    Kris.....

    There is no issue with FY 2010 as we have changed the Dep. Key in 2010.
    The issue is with only FY 2009 which is now closed.
    But the transaction ABF1 as you have mentioned cannot be used in this case, as when we try to post to these GL accounts, it gives us the message that they can only be posted automatically by the system ( which i think is true as these postings occur only after the dep. run ).
    Is there any other tcode through which we can correct the wrong dep. values that were posted in FY 2009.
    Thanks,
    Kris...

Maybe you are looking for