Reversing the x-axis

Hi,
By default, the x-axis in Java 3D runs from left to right. Does anyone know of a way to change this so that the x-axis runs from right to left?
Thanks

I think you can use setScale for a non-uniform scaling, so you would use -1.0 , 1.0 , 1.0 , this would essentially be a mirror effect. Careful here, since your axes would no longer obey right hand rule, probably you could flip more than the x-axis to get the desired coord system you are shooting for.

Similar Messages

Can we reverse the category axis in Design Studio 1.3 column charts?

Hi All,
In WebI, there is an option to reverse the category axis for charts.
Do we have something similar in Design Studio? I have a requirement to reverse the order in which labels are appearing in the chart.
Please do help.
Thanks in advance for your response,
Sarah

Sarah,
You can go to Edit > Initial View and change the sort.
Would this work for you?

Why doesn't the Crop tool allow me to reverse the mouse axis?

Dearest Adobe,
When using the crop tool every axis is backwards! I know I'm supposed to move the photo, not the crop window, But for me this is not a matter of "correct" or "best practice", some people's brains do not work this way. I have been using lightroom for more than a year, and it still feels absolutely wrong every time. Please please please, I beg you, provide a reverse mouse axis checkbox.
I love Lightroom so much. Please help me...
With love,
Cody

The brain is incredibly flexible. But some people are left handed, some people are right handed. Some people have different dominant eyes, legs, arms.. etc. Part of learning a process is how it has been performed in the past, but another large part is the fastest and most reliable synapse. If a process "just feels wrong" that means my brain has already been trained or was wired a certain way to begin with.
The point of design is to create an intuitive interface that not only doesn't interfere, but enhances use of the interface. If I have to re-train my brain to work the way the tool wants me to think, then it is not as successful as it could be!
If you google: "Lightroom crop tool backwards" there are quite a few results with many people asking the same question.
All it needs is a preference item that reversed x and y direction for the crop tool and said: Crop Tool: Reposition the crop window/Reposition the photograph [x] [ ]
I know I'm not the only one!

SSRS 2012, any solution to reverse the direction Data Bar

Hi All:
I am trying to use data bar to have some visualisation of my report, however, there is a problem on the scale. I need to show a reverse direction (heading to the left side instead of heading to the default right side). I am currently use 100% stacked bar
that makes me show the concept, but my number is really small so it is so difficult to see the difference. is there anyway I can show a reverse direction from the simple data bar then I don't need to use the 100% stacked?
Thanks in advance.
Cheers
Johnny

Hi Johnny,
According to your description, you want to reverse the direction of Data Bar in Reporting Services. Based on my test, we can directly enable the Reverse direction option under the Scale options in Horizontal Axis Properties dialog box to achieve the goal.
For more detail information about the method, please refer to the following blog:
http://bhushan.extreme-advice.com/data-bar-in-ssrs-report/
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Change the x axis scale markers in a waveform graph

Hello all,
I am looking at an unusual graphing problem that hopefully has been solved. The problem is because an pre-existing DAQ graph does things in a chart-like manner.
The application context is that I measure a signal vs. test length. During the test, I calculate the UUT position as a function of the test length. The test includes measurements out and back. Rather than graph signal vs. length; I want to graph signal vs. position. I have considered the XY graph, but that co-locates the position data. To remain consistent with an existing test program, I want to change the X Axis marker labels from distance to position at each marker's distance.
I would like to customize marker text for a waveform graph's X Axis. I found a sub-property node for marker text, but it does not seem to iterate through a Waveform graph's X Axis markers.
For example, a test measures the distance 0 to 200 and the X Axis markers are labeled {0, 50, 100, 150, 200}. How do I change those labels to {0, 50, 100, 50, 0}?
The Marker Values[] property node does not do what I expected.
Thanks,
Kenneth
Possible solutions:
1. Find a property node that does the job
2. Use custom indicators for each marker's labels
3. Use two graphs, one for forward, the other for reverse testing
4. XControls

For your option #4 I would use option #2 but use a single picture and hide the X-Axis and do my own.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Reverse the Key for scaling

No key stroke added to constrain scaling. Scaling by dragging the corner should be a universal constraint. The addition of shift key should be to release constraint. Just plain common sense.

Wrong. Shift to constrain is a near universal standard. Shift as you drag to constrain movement. Shift as you rotate to constrain rotation angle. Shift as you shear to constrain shear to one axis. Shift as you scale to constrain to one axis or scale proportionally.
It would be counterintuitive for just one transformation to reverse the Shift-to-constrain convention, and even worse to have all transformations constrain
unless the Shift key is pressed.

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

Not possible to reverse the document in financial accounting Error

Hi All
We are getting invoice Data from Client
through ACC_EMPLOYEE_PAY02
Document Like
31 45699(vendor )    2356.00
31 45688 (vendor)    1245.00
31 45677 (vendor)    1000.00
31 45666 (vendor)    2000.00
40 Accur(Clearing)       6601.00
In this list some of vendors i did payment Run.
I need to reverse the 1 vendor open Item.
It is showing open item but i am unable to reverse this document.
i tried to FB03 but it is showing Below Error
Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '1900000003' in company code '1164' should be reversed. However,
this document was not posted in the Financial Accounting module, HRPAY is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction.
You can display the original document from the FI document via 'Environment' -> 'Original doc.'.
I tried to trace Original Document.
trhough Environment -> Original Doc.
ERROR is
Payroll Posting Document 000000091 does not exist
How to Reverse the Open Item.
raju.

Hi,
SAP doesn't allow you to reverse a document in FI if it was created subsequently from another module (in your case HR).
Why don't you use F-44 transaction code to manually clear the open vendor line item and offset it against the same clearing account?
Regards

Problem with the Z axis...blurred objects...what'd I miss?

Howdy,
I've got some vector objects in Flash that start out real small--like 20-30 pixels square. When I change their position on the Z axis to 'zoom in' on them, the larger they get, the blurrier they get.
When I just tween the x/y size, and not move the z axis they look fine.
For example draw a 20x20 square on the stage.
Convert it to a movie clip so that I can 3D it.
Scale it up to 300 pixels.
Looks fine.
Adjust the Z axis by 1.
Blllluuuurrrrrrrrr.
Did I miss a setting somewhere or is this just a limitation that needs to be worked around?
Thanks in advance,
-Ted

Rothrock, Excellent link, thanks for that! Have some points.
After reading it:
crap.
Looks like I need to learn about hand coding the 3d effects, or using scaling instead and adding switch when I need the z....
Hmmm...that'll require a little mor coffee.

Invoice is not coming in open status even after reversing the payment docum

Hi,
I have posted an invoice Through Transaction code FBA7(Post vendor down payment) for an amount of 2500. After that i made payment of 2500 through F110.
Now the status in FBL1N is that invoice document is showing as cleared and payment document which generated through F110 is open status.
I want to reverse the payment document inorder to keep that invoice in open status. I reversed that through FB08. But still that invoice is shoiwng in cleared status.
Requesting you to please provide me valuable suggestion on this.
Points will be awarded.
Regards,
Shree

Hi Sudheer,
I am trying the steps as you suggested i.e reversing and resetting. But it is giving the following error.
Use the transaction for resetting check payments
Message no. FS642
Diagnosis
When resetting a check payment, you must specify a void reason code.
Procedure
Use the transaction defined for resetting a check payment.
Information about the check concerned is stored in company code 5454, house bank SIGCO, account MEON under check number 0000000918388.
Proceed
Now when i am proceeding, it is taking me to T.code FCH8.
Regards,
Shree.

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Delivery got canceled without reversing the invoice

Dear All,
I came across very strange scenario in one of our client.
In the export process below are the steps involved.
Sales order u2013 delivery (no PGI) u2013 pro forma invoice (wrt delivery) u2013 PGI u2013 Export invoice (wrt Delivery)
Some end user has canceled the pro forma invoice and then reversed the PGI and canceled the delivery, without cancelling the Export invoice, and then created new delivery u2013 pro forma invoice u2013 export invoice.
So, the question is how system has allowed reversing the goods issue and canceling the delivery without cancelling the export invoice.
Now, in system it is showing delivery as archived and pro forma invoice as cancelled, but still showing Export invoice.
System is also not allowing canceling the export invoice, as when we tried to cancel the same it throws an error that the delivery (which has been archived) does not exist.
Kindly note that the item category has been configured as delivery related billing.
Can this be possible because of any user exit? or any other reason? and what can be done?
Thanks,
Ritesh

hi,
THis is possible if the enduser with the help of Abaper or if he has the knowledge and authorization to use ABap tables, he can edit the table and delete the relevant data as required.
This cannot be traced even by abapers.
Thanks and regards,
Sudhir

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

How can I change the Y axis to show my values in a descending order in Numbers. eg zero at the top and the maximum value at bottom?

Hi,
I'm just about getting to grips with Numbers, but I'm stumped at the moment with this problem.
I want to show zero at the top on the (y) axis, as zero is the goal and 100 is the starting point?
can it be done? i would really appreicate some help on this.
Kind regards
Rob

Is it so difficult to read given answers ?
Barry described the correct scheme.
In the table "to_chart", the cell A1 contains :
=ROUNDUP(ABS(MIN(Tableau 1 :: B:E))/10,0)*10
The cell B2 embed the formula :
=$A$1+Tableau 1 :: B2
Apply fill down and fill to the right.
On the left edge, the colored rectangle is a text block in which I inserted the label values.
Of course if you dislike this scheme, you are perfectly free to use an other application.
Yvan KOENIG (VALLAURIS, France) lundi 4 juillet 2011 14:37:56 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

I bought about 4 books at once on amazon for my iPad kindle and then realise that I'm not getting round to reading any of them. I've gone into two books but two I haven't. Is there a way of reversing the order and getting my money back?

Hi I bought too many books at once through amazon for my iPad kindle. Havent read any of them and Two I haven't actually gone in to, they have a banner across front which says 'new'is there a way of reversing the transaction either with amazon kindle or the iPad kindle application so I cane my money back?

You should ask Amazon about their returns policy or check the Amazon website. As that's who you bought them from they would be the best people to answer.

Reversing the x-axis

Similar Messages

Maybe you are looking for