Reverting back to currently Published Material

Ok, I created my website and published it through iWeb about a month ago.
Within that month I re-formatted my hard drive due to an issue with bootcamp, but I forgot to backup my iWeb info on my computer.
Now my website is still published, but I want to edit the currently published material.
How do I take the currently published material and edit it in iWeb, since I lost the "iWeb files" when I reformatted?
Do I need to rewrite all the pages? Or do I just "save" the HTML documents and somehow open them to edit in iWeb?"
Thanks for the assistance.

Your domain.sites file is the key to your iWeb site.
This is all that you need to back up in order to recover your site, should the need ever arise.
Obviously a full back up of you home folder(s) is a good idea too as it includes all of your photos, music, documents, settings, etc.......
Regular backups should be a part of every users routine.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) >>Updated iWeb Hints n Tips<<</a>

Similar Messages

For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

backup from old computer and restore to new either to icloud or an external drive also check out turingtest2's excellent article on backup using synctoy

Revert back posting periods in MMPV..

Hi,
How can i change the existing entry in table MARV ...
Posting periods by mistake i was extened 3 month ahead in MMPV trasaction ...now i want to revert back the entry.
this entry is in MARV table , how can i change the period in table MARV..
Help me.....
Regards,
San Rao..

Hi,
NOTE: Involve also FICO Consultant and collect all the documents before proceeding.
MMRV: to check which period is open & also set back posting allowed,
MMPV: to open the period.
It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.If there has already been a posting after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
Steps are as below;
Go to Transaction Code SE38
Enter program name RMMMINIT
Execute or press F8 function button
Enter your company code (From and To)
Enter relevant date: Say 01/02/2008 for Feb. 2008 month to be opened as of now
That means, user can post for the month of Jan 2008 as well as Feb. 2008
Refer SAP Note No. 487381 for more details.
As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
Again go to MMPI enter company code, period and year and execute.
OR
NOT ADVICEABLE THIS METHOD, ONLY TRY IN SANDBOX NOT IN RUNNING SYSTEM
1. Use t.code:OX18, and delete the plants assigned to your CO.Cd and save.
2. Use t.code: OMSY and change the posting period to the one u want and save.
3. Use t.code:OX18 and assign the plants you have deleted in step 1.and save.
Regards,
Biju K

I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad. It reverted back to an old apple id and I don't know the password. I have tried all the suggestions and no luck.

I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad. It reverted back to an old apple id and I don't know the password. I have tried all the suggestions and no luck.

You didn't say what you've tried, but f the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data. How can I retrieve all the lost data??

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

My Adobe Creative Suite 6 (I guess student edition) expired HELP! Can I revert back to CS5??

Can I revert back to CS5?? (I have a comic deadline to make.)
I know 5 is registered here on the site. It was a digital copy. I looked at my old laptop. (3 years old or so.) and noticed 5 on there. I can still use it. Some how my CS6 just up and quit working. Which I thought was funny considering I bought it the same way I bought my CS5. I am working on two comic series of my own that are going to be published as E-books and physical books and need some advice.
I am left without Illustrator to use and I was right in the middle of working on all my character concept art to get trademarked.
( I can't afford the 357 upgrade to "re-open:" CS6 so I am left without anything to work on. All of my Illustrator files are also JPEG so i can view them all, but I was in the middle of new artwork when my CS6 decided to become a trial and I got locked out once the "Trial Period" ended.
I am a legally blind Cartoonist and Comic Artist and these series are my first real big projects that are getting published. I really don't want to have this process stopped for any longer than it has been. It's been almost a month since I was able to draw. (I can draw on paper, but with my eyesight Adobe Creative suite is perfect for me and causes less strain on my eyes.) It's my preferred platform to work on as far as drawing.
Hope somebody can help.
(I just got married so I am low on funds at the moment. This project is my baby and I do not want to leave it unattended to for so long.)

STEP 1:
FOUND MY PROBLEM (or half of it.)
I went into my computer and then program files.
I found that EVERY SINGLE TIME I click any of the Adobe Applications that say (64 Bit) they give me that error message I showed you in an above post.
STEP 2:
I clicked Adobe in program files.
STEP 3:
I can SUCCESSFULLY open any of my Adobe Apps that are not (64 bit)
It turns out all of my desktop shortcuts of my adobe apps were all coincidentally 64 bit ones that don't work.
SO- in conclusion I think I have partly solved my problem.
I replaced all of my app shortcuts with the normal program files and NOT the 64 bit ones. BUT- I am worried....aren't the 64 bit versions of ANY apps you buy important?
I do feel worried since my WINDOWS 7 PROFESSIONAL is a 64 bit OS. This would effect my programs correct?
Feel free to use my story to help you solve other customers' stories. I would like my problem looked into, but I am only half as stressed now.

How can i revert back to an earlier version of Firefox? I have had nothing but slow, slow loading eversince I upgraded to4.01.1. I hate this version of Firefox. I hate the toolbar, it's a horrible colour and I can hardly read it.

Ever since I upgraded my Firefox to 4.01.1, everthing loads much, much slower.......I can go make a coffee while the page loads. Sometimes, it is soooooooooo slow, that it times out and I have to start all over again. Even when I sign on and load google, sometimes it takes forever.
I also do not like the toolbar at the top. It's grey and hard to read, what is wrong with white?
Can I revert back to the earlier version of Firefox? It worked much better. I use ancestry.com a lot and they even recommend a 3.??? version of Firefox.
Anything is better, so I don't have to sit and wait and wait and wait.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

Pages 5.1 disappeared and reverted back to 09 (4.0.5)!

Hi Everyone.
I downloaded Mavericks (love it) from Leopard (a big jump) and upgraded Pages from 4.0.5 to 5.1. I received the new introduction, the new icon in the dock, and converted some of the documents in my files. Today, Pages has reverted back to '09 (4.0.5) including the icon in the dock and I have no idea why, or how to put it back to the upgraded status. My Software Update and App Store both say that the new Pages is installed. I tried rebooting, and logging off and back on to no avail. That is the extent of my computer savvy. What do I do? Has anyone else come across this issue?
Thanks in advance for any help I may receive.

... FOUND IT!
So, to anyone else who comes across this incident for themselves, I found the new Pages 5.1 in the Finder under Applications. It exists side by side with the old pages. I tried to drag the old Pages to the trash, but it wouldn't go it. So, I guess I have two, which is fine because there are some templates in the old that are not in the new which I am currently using.
I'll keep this posted for a little while in the event that someone may need it.
Good stuff

ABAP Code in End Routine - reverts back to previous version

Team:
Currently, we are in upgrading from 7.01 to 7.4. The new development environment is only used to built the new development work until the mirror image client is upgraded.
In one customised dataflow, we place some code and the transformation is activated. No issues at all, then the next day, the code reverts back a previous version. Consequently, we are losing the code. We already have a sign off of a piece of work and we checked the code again. We were puzzled as to why the code has gone back to a previous version.
SAP is asking to replicate the issue. Unfortunately, we cannot replicate accurately this issue. Now, we have two more developers reporting the same case. Yet again, the issue comes and goes. We reboot the server with some success. Then days later, the issue pops up with a developer. The Basis guys have not found anything related to this case.
Any idea is welcome.

Sync to Date is currently the only option offered by the DTR.
You can only edit the active version of a resource in a workspace, because the DTR does not support branching within a workspace: There is no mechanism in place to merge an older version of a resource into the same workspace.
If you want to do this, you must make a copy of the workspace (a "maintenance" workspace) and make your changes in that workspace. You can integrate the related activity/activities into the "ongoing development" workspace afterwards, if you want to of course.
Why don't you want your bugfixes to be forwarded by the way? Those bugs are also in your enhancement tracks...

Lightroom 4 reverting back to 3.6 on some images

After a nightmare getting Lightroom 4 running with all of my images visible on a new computer (with assistance from the great Help Desk people at NAAP) I found another interesting problem. After getting Lightroom 4 running yesterday I edited about 50 images using the new Ver 4 tools...highlights, shadows and whites. I backed up before shutting down and this morning I went to the next NEF photo in sequence in the filmstrip and it reverted back to 3.6 tools...recovery, fill light and brightness!! I selected the next photo in sequence and the Ver 4 tools are back. What's going on? Is this a bug?

Nope. Read user manual.
In short - tools depends on Process version (current is 2012).
To change Process version go to camera calibration tab and select version from dropdown list.
Three options are available: 2003, 2010 and 2012.
2003 - pre LR3, 2010 - LR3, 2012 - LR4.

How do I revert back to an older version of an app

I have an old Gen2 iTouch with iOS 4.2.1 that I only use for music ans some basic time killer apps. Since none of the newest updated versins of the Facebook app will run on it I want to know how to revert back to an old running version. I do not want to go buy a new iTouch since this one works fine for what I use it for.
Any suggestions?

You need to delete the current versions of them from the iTunes library and import the older ones from another location on your computer or from your backups. If you don't have any copies of the older version, you can't.
(84833)

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

Back Flushing Vendor consigment Material in process order

Dear Experts,
I have a question Regarding Vendor consignment back flushing
while i am doing order confirmation system not proposing vendor name and in good movement tab
may i know what configuration or master data setup is missing
My requirment is i need to back flush vendor consginment material automatically
currently i need to manually choose the vendor while confiming the order
Thanks in advance
Rgrds
Raj

Dear Experts,
I manage to use stock determination group for back flushing consignment material
it works fine system automatically picking up vendor as we do not have multiple vendors
now i have new issue
for instance
i have a RAW material A used in a Product A when i do confirmation system can able to do back flush with movement type 261 K
i am using same RAW material A used in product B and when i do confirmation system give me a error
as below
Pipeline/consignment movement posted without value
Message no. M7234Diagnosis
The system has determined a consignment/pipeline price of 0.00.
Possible reasons:
The system could not find any valid condition for the posting date in the consignment/pipeline info record.
A price of 0.00 was defined in the info record.
System Response
Depending on how the system is configured, the message can be either a warning or an error message.
A withdrawal from this consignment stock or from the pipeline will not create vendor liabilities. For materials with moving average price control, withdrawals are posted without value. For materials with standard price control, a price difference posting is carried out.
The message is also issued when materials are received into consignment stock, as the system must check whether a consignment price of zero is required.
Procedure
If you have authorization, check whether the conditions or the price has been defined correctly in the info record, if necessary. If there is a condition with a price other than zero, check whether the posting date of the movement lies within the condition's validity period.
Proceed
just wonder does any one have this issue
so strange i can issue to product A and not product B
Please help me if you have any problem
Rgrds
Raj

File name reverts back to original file name from camera

In iPhoto I changed all the names of my pictures from what the camera assigned them. I can see the title on each picture. Then when I go to attach the picture to an email it reverts back to original name from the camera.
It does the same thing when I copy over to an external hard drive.
How do I get the name to change permanetly?

Sandy:
Welcome to the Apple Discussions. Another alternative would be to change your workflow. Upload to a folder on the desktop first and use a renaming application like R-Name to batch, sequentially rename your photos before importing into iPhoto. I use the international date format with a brief description of the shoot like this: 2008-06-15-Fathers Day-001. It may take a bit more effort at the beginning but saves a lot of headaches on down the line.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Transaction Launcher in CRM 7.0 reverts back to CRM view.

Hi Experts,
I have configured all the necessary setting required for transaction launcher but still cannot launch it.
The issue is when i launch it, it directs me to the logon screen of target system (ERP/ECC). Once i give my userid/psw, system thinks for couple of second and the system jumps back to CRM view.
In my case, i'm using transaction launcher to launch VA31 (Scheduling agreement). On executing the launch transaction it is closed immediately and the system reverts back to account identification screen without any error message.
I have created ZTSTC in ECC and checked "synchronous" for method "transaction.execute". Do i need to create ZTSTC in CRM as well?
Thanks
Shree

Hi Shree,
First, you don't need to create ZTSTC in R3/ECC. Create ZTSTC in CRM and make the method: ZTransaction.Execute - Synchronous. Then change the status to 'Released'.
In R3, in /NSE80 create a Display Object, like "ZCUSTOM". In ZCUSTOM create a method. In your case create "ZVA31". In the ABAP tab of the method, check 'Transaction' and in the 'Name' field enter: VA31. Save and release this method and Object.
Now, before you proceed with the next step of seting up SSO (Single Sign On) check if these notes have been followed:
A) Maintain the settings for domain 'CRMD_CIC_ABOX_ITS_BASE_URL' in SE11 as per NOTE: 1337200.
B) Maintain settings for logical systems as per Notes: 1337472 (For R3) and 1337200 (For CRM) logical systems.
After this ensure that the URL for R3 ITS looks like this: http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
Before creating R3/ECC Transaction launcher links - SSO certificates need to be setup by BASIS.
a.     Import CRT certificate into target system (your CRM client) via Export/Import in STRUSTSSO2
b.     Run SSO2 in target (CRM) and check green lights.
c.     Maintain table TWPSSO2ACL and put in system and client (CRM, XXX)
d.     Activate in SICF /sap/public/bc/its and also sap/bc/gui/sap/its
e.     SE80 -> Internet Services. Look for SYSTEM and WEBGUI and Publish them.
Please try these and let me know if this works for you.
Regards,
Ramesh Nallabelli

Reverting back to currently Published Material

Similar Messages

Maybe you are looking for