Rework on sales return finished goods material

Hi all,
There is sales return finished good in stock.
This FG is rejected by quality assurance due to some quality reasons.
Now, rework to be done on this FG to make it as per quality standards,
After rework the material code of FG will remain same and sales will dispatch this FG in the same code.
How to show this rework process and what r the steps.

Hi,
This is handled via Rework Order type, I Feel PP would be the better forum to Get better details regarding your issue, its a normal process in production to do rework on materials once they are identified as not meeting the required specification.
Regards
Chandra Shekhar

Similar Messages

  • Issue in creating Finish Good Material for specific sales area

    I am trying to create a new "finished good material" through "MM01" , after selecting  "industory sector" & "Material type" I have also selected the views the next screen comes is for Organization level ,
    when I select Plant , sales org & distribution channel and press enter an error comes "Company Code 1000 is not set up for Material Managment".
    please help me out.

    hi,
    Check few things:
    1. Check whether the plant is assigned to the co.code which it is showing and the Material is maintained for the same plant...
    2. Check whether there is proper assignment of the porg to co.code
    Porg to plant, etc...
    If plant is not assigned to cocode then assign it in OX18....
    Or
    If you are using the IDES, then try with the other plant and material...
    Regards
    Priyanka.P

  • Non saleable returned finished goods which are discarded handled in SAP

    Hi Gurus,
    I have a question with regards to Sales return.  I have some returned finished goods which was taken back in the system and reserved for quality check.  Here FG stock was debited and COGS was creditedat the time of physical receipt of material.  But after quality check it was decided to scrap the material.  How does the system pass the entry for the discarded stock.
    Rgds,
    MRS

    Hi
    The entries you have mentioned had set off the goods issue entries.
    Now when damaged - the materials can be scrapped with movement type 551
    thanks

  • Excise Invoice cannot be captured for RG1(Finished Goods) material

    Dear Friends,
    While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
    Excise Invoice cannot be captured for RG1(Finished Goods) material
    Message no. 4F276
    The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
    Pl help me how to get rid of this error.
    Regards,
    Ask

    In GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
    Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
    Regards,
    Indranil

  • Good Issue batch Flows at GR for finish good Material

    Hi Gurus,
    Please Help me on below scenarios
    1)Good issue material batch and its characteristic automatically flows to Finish Good Material at the time of Good receipt of Process order.
    2) If Component of Finish Material ie Good issue material is having the different batches issued to the Finish material Process order then System should only consider those batch which is having the Characteristic values is having more that 50%
    Exam : Good Issue material X and requirement qty 10
    Then Component issue 10 qty with 2 batches  A and B
    Batch A  Qty 5 : Char              Value          Batch B Qty 5       Char      Value
                               Density            10                                             Density     15
    Tthen Finished Good batch consider only batch B which is having the maximum density.
    Here we want the same batch B and it should automacticaly flows  to the Finish product at the time of GR ( Process order )
    I tried with Batch derivation but we want the same Good issue batch to finished material
    Please help me on this scanrios and if we are going for development then how it is possible technically ( with Functioan specification)
    Regards,
    Saurabh

    Hi Gurus,
    Please look above the scenario and reply.
    Regards,
    Saurabh

  • Costing Report summarized production cost by Finished Goods Material

    Dear Expert,
    I am looking for a report that can summarized the production cost in production order by Finished Goods Material Number.
    or a report that can show me the cost components incurred related to a Finished Goods Material.
    Can any expert enlighten me? please help.
    Thanks a lot.

    Hi
    I would recommend the product drilldown reports in KKO0...
    For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
    After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
    It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
    Regards
    Ajay M

  • Background Usage decision of FERT material (Finished good material)

    DEaR ExPert,
    I have some problem regarding background Usage decision of FERT material (Finished good material)
    A inspection lot will be generated against production order fert material  and all batch will be post  movement type  321 Trough qa16 UD Foreground but when i doing UD thorught  UD background this error will be appear
    No batch input data for screen SAPLIPW1 0200
      Message no. 00344
    Kindly elaborate me
    Regards
    Pirya Sharma

    This is more related to your i/p data screen or Variant which you are executing.
    Nitin

  • Customer sales return and same material return to respective vendor

    Hi Experts
    would like to get your valuable inputs in the below mention scenario
    I procured material ABC qty 10 from vendor and same has been sale to customer
    now Customer is returned the material ABC qty 5 to my client
    now client want to return the goods for the respective vendor from whom it was procured.
    The requirement is the system should able to predict automatically  from whom the goods has been procured? 
    note:- client can procure the same material ABC from 10 different vendor
    Is there any  common link can be maintained  between purchase material from vendor to my client  and from my client to customer ?

    Hi,
    Lets Try to do in this way,
    1.Create a sales order
    2. Create a PO for that material, Now at GR in delivery filed give the sales order number. so in PO histry tab of PO we can c the sales order number. and sales return can link with PO.
    Now in case Sales order is latter the Purchase then
    in Sales order PO filed we can give the PO number on which we have procurred the material. so when u go to sales order display system will give PO ref.
    3. Now while sales return you will get the ref. of sales order
    4. Lastly it is time to send the material to the vendor 4m whom it is been purchased, here u can get the link :- 4m sales order, PO field u'll get or 4m PO history you can get the sales order number.
    try this mix, it may work without any further efforts
    Rgds
    S

  • Finish good material not showed with 131 movement type in mfbf code in REM

    Hi experts,
    I am working in Repetitive manufacturing process, I have 6 operations in rate routing from which 6th operation is mile stone.
    When i confirm last operation through MFBF, system shows components list with movement type 261 but finish material is not showing with movement type 131. The document no. is generated at the time of saving but in displayed document FG shows with 131mov. type and component list with 261.
    Setting for REM are as follows
    1. control key- pp03
    2. production versions- maintained with standard REM profile
    So my question is how can i see FG material in MFBF screen along with componets list ? What is the settings for this or any development is there ?
    Regards,
    Nitin Nerkar

    Nitin,
    System behavior is not wrong. What i understand from  Backflush is, Back flushing is nothing but automatic goods issue. System will automatically posts the goods issue when you confirm the operations.You have no need to make manual issue. It will reduce the effort.
    Backflushing is automatic accounting (Goods issues - 261 mvt) of material consumed for production, at the time of confirmation.
    When you use auto goods receipt indicator then at the time of confirmation system will do auto GR. In normal discrete mfg scenario, when you are doing confirmation when you click on GOOD MOVEMENT tab you will get GI as well as GR with movement type.
    But in REM scenario you doing MFBF (REM Backflush) means This activity executes multiple activities in a single step, such as: finished product goods receipt, backflush of component materials, posting of costs to cost collector and creation of material and accounting documents. When you are doing MFBF and clicking on post with correction tab it will show you what are the components going to backflush, and that is ok. Here you are not going GOODS MOVEMENT tab to display GR.
    I think this SAP system std behavior.
    Tara

  • Sales BOM & Free Goods Material

    Hi There are 2 materials X & Y
    For few distributors  it goes as Sales BOM
    1) if you enter 5 qty of X , it picks 2 Qty of Y also in Sales Order
    i have Created Sales Order BOM for same.
    item category group of X is ERLA
    item category group of Y is NORM
    For few distributors  it goes as Free Of Charge materials
    2) if you enter 5 qty of X , it picks 2 Qty of Y also in Sales Order
        both are Free
    Now in both cases material code X is same & i cannot change item category group of X as ERLA
    How to achieve this?
    Reg,
    Antaa21

    Hi,
    Std functionality does not suppoort this . Pls refer SAP note 796926
    Regards
    Sanjay

  • Sub storage location for Finished Goods Material

    Hi MM Gurus,
    In our organization, FG materials are physically stored under different sub areas, even though the same lies under single storage location in SAP. Currently the users are downloading the stock information into excel and allocating the mentioned physical storage areas
    Since the option of creating further storage locations at the same level or going for warehouse management is not feasible for us, can we resolve this issue by going for any sub storage location (sub dividing the existing storage location into physically storage sub areas)?
    Requst your valuable suggestions in this regard.
    Thanks & Regards,
    Vinod

    Yes your requirement is possible and I have seen it working in one of our client. They named the sub storage location, as STORAGE BIN, and this storage bin data is stored in material master under storage location view. This input field is created with help of abap.
    This way your storage location is distributed under sub storage locations namely storage bin, this way you can create areas of your storage location without turning on warehouse management and then assign materials to the storage location and then to storage bin, thus meeting your requirement.

  • Draft documents for Sales return and Goods return

    Morning, Exports,
    I got two questions, pls kindly help!
    1) The draft documents regually if not with approval process, can be removed from draft list, but once it's with approved process, the "approved" draft document can't be removed. How to have it deleted from the list of draft documents?  As there are two many drafts and we need to take them out once its data was adding into system....
    2) Where we can see the serial# that picked for the draft document?
    Thanks!
    Emily

    Here are the answers ---
    1) The draft documents regually if not with approval process, can be removed from draft list, but once it's with approved process, the "approved" draft document can't be removed. --> TRUE
    How to have it deleted from the list of draft documents? --> NOT POSSIBLE FOR DRAFT DOCUMENTS
    As there are two many drafts and we need to take them out once its data was adding into system.... --> USE THE "OPEN ONLY" OPTION TO AVOID THE CLOSED / UNNECESSARY DRAFT DOCS.
    2) Where we can see the serial# that picked for the draft document? -->  GO TO ANY MODULE -> REPORTS -> "Document Drafts Report" --> Document No. [BUT THIS NO. WILL NOT TAKEN IF ANY DOCUMENT IS CREATED AFTER THIS DRAFT OF THE SAME DOCUMENT TYPE. THE FINAL NO. WILL BE THE LAST NO. + 1 OF A PARTICULAR DOCUMENT TYPE]

  • Return process of componets of finished goods

    Hi
    Can u pls guide for return process of componets of finished goods
    Sales order  & invoice contains only finished good material code(e.g Panel).
    We want to take return of componets assembled in that panel.
    Can it be done by regular return order  process.

    Hi,
    I think you may have to use CS-Module, where there is a process called "Returns and Repair order processing."
    Please ref. the link below.
    http://help.sap.com/saphelp_46c/helpdata/en/e6/4a903f9e0311d189b70000e829fbbd/frameset.htm
    It can be done in the following way
    Please maintain BOM for the Camponents, under the main material.
    You can do it either using "CS01" or under the menu path:
    Logistice > Customer Service > Maintain Technical Objects > BOM > Equipment BOM or Material BOM.
    Hope this will be of good help to you,
    Regards
    DSR
    Edited by: D.Srinivasa Rao on Nov 24, 2011 6:42 AM

  • PO for Finished Goods with Tax Code - Inventorise

    Hi All,
    Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO2). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO2). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
    I had followed the following steps.
    1) Material code- Chapter id maintained in J1ID
    2) Vendor code excisable in J1ID
    3) Maintain condition record in FV11 for the correct validity period
    4) Check the PO creation date whcih should fall between condition record validity period
    Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
    I am not able to identify what is happening.
    I will give the flow so that you can help me out.
    1. Created Material - Finished with all views except - Classification, Forecasting,
    Work Scheduling & QM
    2. Create Info Record - Tax Code given
    3. J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
    4. FV11 - Maintained till - 31.12.9999.
    5. FTXP - Tax Code is Maintained & it's working fine with other PO.
    6. ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
    7. In J1ID cenvat determination has been maintained.
    Also the material type should be raw in material chapter id combination instead of RG1 even though the material is finished to take credit of excise it should be maintained as RAW .
    Over Here if i see i am not able to capture (JMO2 A/P Eduty for Inven 0.000%) &
    For Sale tax i have maintained it in FTXP as (A/P C Sales Tax Inv  NVV   12.500%  JIP1) but it is not appering in PO Tax code. I can See the sale tax is geting updated in Tax code for Inventorise if i give it with out ED in tax code. With ED it is not Appering in Taxcode.
    Can you help me resolving the issue.
    Once again thanks for youre help.
    Thanks in Advance,
    sapuser.
    Edited by: sapuser on Dec 26, 2008 10:10 AM

    Hi All,
    Just give a check by entering cenvat determination table. System checks this by default for excise details. Enter i/p and o/p material as same.
    Hope this will resolve you Problem,
    Pherasath

  • RG1 register entries during GR for Finished goods- in tarde business

    Hello Experts,
    I have to configure trading business scenario, in which my client externally procures the finished good from his vendor and sale the same one with added overheads. I have configured Sales order that reflects item cataory TAB so auto PR generetes during sales order. Base on PR i can do PO followed by MIGO. But during MIGO system omittes error  as: Excise Invoice cannot be captured for RG1(Finished Goods) material  now here i have to change the material type in j1id from finished good to raw material.Then system allows the transaction.
    Please enlight the issue, am i doing the right step or it needs to be corrected, if so please help me out with, how can i handle excise related entries in this transaction (specially for RG1 updation during initial GR)
    Thank you in advance..

    Hi,
    When FG trading is involved, RG1 should not be updated. In trading there cannot be CENVAT credit. It is for manufacturing activity only.
    You need to update RG23D so that you can pass the exact Excise duty to the customer.
    The process is receive Goods, Capture excsie invoice and create excsie invoice from depot for sales to the customer.
    Hope this helps.
    Regards,
    Sharan

Maybe you are looking for