RFC Call to R/3 from EBP during creation of SC from CCM

Hi All,
I want to know the RFC Function moule which will call to R/3,
when an item is added to the shopping Cart from a CCM catalog or from an existing Shopping cart.
Assured Points
Thanks in Advance

Hello All ,
I want to check R/3 Contracts every time when a SC is being created
from a CCM catalog or from an existing SC. The check to be performed is whether there is any deletion flag for the Contract/Contract Item. If the R/3 contract has a deletion flag active for the item added to SC, program will generated a warning message.
So kindly tell me what is the RFC that to be called in EBP to check. And I hope I need to implement the changes in Check Badi.
Kindly Advice.
Assured Points.
Thanks in Advance.

Similar Messages

CME, Call forward to CUE from CCM IP phone

I want to call forward the call from CCM IP phone to CME ephone's voicemail which setup in CUE. works okay between CME ephones. configured voice service as follows but no luck. what did I missing to implement?
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
-CCM4.1.3, configured H225 trunk. leave uncheck the MTP on the trunk device
-gatekeeper to connect between CCM and CME
-CME3.3, h323 to gatekeeper and sip to CUE
-CUE2.1
Thanks in advance,

It works by restart the CME router and have a question the sip-ua output. I have two media streams but the 2nd shows "STREAM_IDLE". I think this is for g729 connected to CCM via h323 gk. Can I get an explanation why?
CME#sh sip-ua calls
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 4083132006
Called Number : 4211
Bit Flags : 0x101A0030 0x100000 0x500
CC Call ID : 95
Source IP Address (Sig ): 10.253.66.254
Destn SIP Req Addr:Port : 10.253.66.2:5060
Destn SIP Resp Addr:Port: 10.253.66.2:5060
Destination Name :
Number of Media Streams : 2
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 95
Stream Type : voice-only (0)
Negotiated Codec : g711ulaw (160 bytes)
Codec Payload Type : 0
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:16998
Media Dest IP Addr:Port : 10.253.66.2:16904
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Media Stream 2
State of the stream : STREAM_IDLE
Stream Call ID : -1
Stream Type : voice+dtmf (1)
Negotiated Codec : No Codec (0 bytes)
Codec Payload Type : 255 (None)
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:17120
Media Dest IP Addr:Port : 0.0.0.0:0
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Number of SIP User Agent Server(UAS) calls: 0
CME#sh sccp connections
sess_id conn_id stype mode codec ripaddr rport sport
1 2 xcode sendrecv g711u 10.253.66.254 2000 16518
1 1 xcode sendrecv g729 10.253.66.254 2000 17620
Total number of active session(s) 1, and connection(s) 2

Which paramter configures the timeout for rfc call (to R/3 ) from BPM

hi froum,
i have a scenario, with BPM, in which theres a synchronous send to a rcf Function Module in R/3,
now, can u tell me which paramter decides the time out for this Sync call to rfc enabled Function Module in R/3,
i mean which paramater in SXMB_ADM or anywhere else that dictates the time period

Check this out, RFC adapter section
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
Prateek

Is there any way to limit the number of RFC calls from xMII to SAP R/3

Hi All!
I wanted to know whether the number of simultaneous RFC connections made from xMII to SAP R/3 system can be controlled in any way. Suppose we have a scenario wherein some million Sales Orders or Production Orders are to be updated in SAP R/3 from xMII in a short span of time. For all these updations to take place, multiple RFC calls will be established from xMII to SAP at the same time. This will increase the load on the SAP R/3 system and affect performance of the SAP R/3 system. Is there any check on xMII side to limit the number of RFC calls that can be made to SAP R/3 system?
Regards
Anupam

Anupam,
If you are using 11.5 just keep in mind that the JCO connection points to a single application server (based upon the SAP Server alias connection settings), but the traffic itself to make a BAPI request is effectively the same as any client user traffic. There will obviously be limitations on performance and throughput, with network and server constraints added to the number and size of the R/3 requests, but there is no magic formula to plug-in because of all of these variables.
If you are using 12.0 (or plan to migrate when it goes GA) then taking advantage of the JRA (java resource adapter) and the associated application server pooling that it offers on the NetWeaver side of things will greatly help you in the throughput capacity.
If you have put some of your xMII application into either test or productive use and are running into issues then I would highly recommend entering the specifics into the customer / partner support portal so that they can help you through any associated problems.
Regards,
Jeremy Good

RFC call failing due to UNICODE implementation

Hi
We are trying to connect to a SAP system using the JCO (SAP-JAVA Connectivity). We are passing the user name as an input parameter and in turn the SAP system send back the no. of item (ABAP Type integer) pending for the user name to the java and its inserted/updated in Oracle DB (which does accept the unicode characters).
It was all wokring fine untill the SAP system has been migrated to Unicode upgrade. Now the RFC call is getting failed from our system. On analysis we found with debug, that the user name is not getting accepted by the SAP system and throwing the error -says Exception in thread "main" com.sap.aii.proxy.framework.core.BaseProxyException: Conversion error between two character sets., error key: RFC_ERROR_SYSTEM_FAILURE and at the SAP end the error says "Conversion of "UNAME" from code page 4103 to 4102 is failed". The unicode change in SAP system cannot be reverted back due to some constraints.
Can you please help, how can we pass the user name as encoded in character set 4102 or any other solution so that it can be accepted by SAP and run the Function module and return the data.
Many Thanks
Snehil Joshi

Check RFC destination in Tx SM59. You must have one tab for unicode settings.
Regards.

RFC Call Missing

I am a novice at this and would like to get some suggestions from the gurus in this forum. I am trying to integrate an RFC call CTS_API_CREATE_CHANGE_REQUEST. But I do not see this RFC call using SE37. So I have two basic questions.
1) Is there a transaction that I can use to see a list of all RFC calls that are available in my R/3 system ?
2) Do I have to do anything to enable RFC calls, to be invokable from outside the SAP system ?
TIA
Yogi.

Ok, I am posting this for the benefit of everyone.
I figured out a mechanism by which all RFC and BAPI calls within an R/3 system can be listed.
1) Invoke Transaction SE37
2) With the cursor on the 'Function Module' field press F4.
3) In the popup that shows , press the 'Information System' button on the task bar at the bottom. Its the one with the 'Binocular' graphic.
4) Another popup called "R/3 Repository Information System: Function Modules" opens up.
5) The third icon from the right of the task bar at the bottom reads "All Selections". It is a white icon, with a green mark and a black down arrow. Click on that.
6) You now get an advanced search screen with lots more options than the ones previously displayed.
7) One of the radio's says "RFC modules", another checkbox says "Only modules for BAPI".
8) Set whatever you are interested in and hit the "Check"
Enjoy.
Thanks,
Yogi

How to receive RFC calls exceptions

Hi,
My english is bad, sorry.
I have a RFC call to access data from a NIF. In the function that performs the 'select' I have created an exception if the NIF does not exist, is called 'NO_DATA'. How I recibe this exception in Web Dynpro?
Thanks,
Regards,
Rubén Gutiérrez.

Hi,
In your remote enabled function module, under Tables tab you can
add a table type attribute which can hold the return messages.
ET_Return like bapiret2
In webdynpro loop through the RFM return message node and print the messages.
Sample Code:
for(int i=0;i<wdcontext.nodereturn.size();i++)
String message = wdcontext.nodereturnElement.getAttributeValue("Message");
if ("S".equals(wdcontext.nodereturnElement.getAttributeValue("S")))
   msgManager.reportSuccess(message);
else if("E".equals(wdcontext.nodereturnElement.getAttributeValue("E")))
   msgManager.reportException(message,false);
   errorRaised = false;
else if("W".equals(wdcontext.nodereturnElement.getAttributeValue("W")))
   msgManager.reportWarning(message);
Regards,
Bala Baskaran.S

Tracing an external RFC call

Hi
I am calling a Remote Function Module from a web dynpro application in BW system but somehow it is not functioning properly. I want to find out if the control has actually reached the Function Module in BW system and then some error is happening or the control is not reaching the BW system at the first place .Is there a mechanism/transaction in the BW system by which i can trace whether some RFC call is being made from outside to a FM and if at all some error is happening in that Func Module then what the exception is ?..
please help
regards
Nilesh Taunk.

Hi !
Go to the ST11 and have a look to the devrfc files.
RFC-Activities arfe traced into this files when RFC-Trace is swiched on.
Regards
Rainer
Some points would be fine if that helped a bit.

RFC-Call from a xslt/javamapping error

Hi.
We implemented an Szenario IDOC to Mail(attachement).
Our incomming IDOC is a standard-IDOC from SAP.
ISU_INTERVAL_USAGE_INFORMATION.ISU_VDEW_MSCONS
our Target is an EDIFACT-File attached to a mail.
We did this succesfully before in a similar Szenario with UTILMD-IDOCs to a CSV-attachement of a mail.
Because there is no Mailinformation in these IDOCs, we do a RFC-Call to a backendsystem (SAP-ISU) wich delivers the information selected by the IDOC-number.
This is the XSLT for this call:
<xsl:variable name="maildata" select="emailadress:new($param1, $param2, $inputparam)" />
<xsl:variable name="from" select="emailadress:getSenderEmailAdress($maildata)" />
<xsl:variable name="to" select="emailadress:getReceiverEmailAdress($maildata)" />
<xsl:variable name="cc" select="emailadress:getCcReceiverEmailAdress($maildata)" />
<xsl:variable name="bcc" select="emailadress:getBccReceiverEmailAdress($maildata)" />
when I test the Mapping in the Integration Builder, the RFC-call gives us the following error message:
08:42:39 Teststart
Creating XSLT mapping iDoc_MSCONS_to_Mail
URIResolver called with href = iDoc_to_MSCONS.xsl and base = iDoc_MSCONS_to_Mail.xsl
Source resolved. System id = iDoc_to_MSCONS.xsl
Call XSLT processor with stylsheet iDoc_MSCONS_to_Mail.xsl.
Method fatalError called, terminate transformation
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
TransfromerException during XSLT processing:
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
08:42:39 Testende

Hi Harald,
I guess this is the IDEX package delivered by SAP?
In the latest version of the package SAP also deliveres a package for eclipse to test the mappings.
Also make sure that your data in IS-U (serviceanbieter) is maintained correct!
Regards Mario

Error during loading of transaction data: An RFC call-up triggered the ...

Dear Sirs,
during loading of master data from a 4.6C SAP system to BI 7.0 SP9 I get the following error during processing (data packet).
<i>"An RFC call-up triggered the exception (ID: RSAR NO: 503) "</i>
The strange thing with this error is that it emerged today, after successfully loading master data and a subset of transaction data yesterday from same source system.
Has anyone else come across this error, and can tell us where we should look for a possible solution? (or a better error explaination).
The RFC connections works fine when testing in SM59, and was functioning yesterday. No relevant dumps in either system.

Hi folks,
I am also interested in this error.
Thanks.

Strange response time for an RFC call viewed from STAD on R/3 4.7

Hello,
On our R/3 4.7 production system, we have a lot of external RFC calls to execute an abap module function. There are 70 000 of these calls per day.
The mean response time for this RFC call is 35 ms.
Some times a few of them (maybe 10 to 20 per day) are way much longer.
I am currently analysing with STAD one of these long calls which lasted 10 seconds !
Here is the info from STAD
Response time :                10 683 ms
Total time in workprocess : 10 683 ms
CPU time :                               0 ms
RFC+CPIC time :                       0 ms
Wait for work process           0 ms
Processing time           10.679 ms
Load time                            1 ms
Generating time                   0 ms
Roll (in) time                        0 ms
Database request time         3 ms
Enqueue time                      0 ms
Number      Roll ins            0
                 Roll outs           0
                 Enqueues         0
Load time   Program             1 ms
                  Screen              0 ms
                 CUA interf.          0 ms
Roll time    Out                 0 ms
                  In                  0 ms
                Wait                0 ms
Frontend    No.roundtrips       0
                  GUI time            0 ms
                  Net time            0 ms
There is nearly no abap processing in the function module.
I really don't uderstand what is this 10 679 ms processing time especially with 0 ms cpu time and 0 ms wait time.
A usual fast RFC call gives this data
23 ms response time
16 ms cpu time
14 ms processing time
1 ms load time
8 ms Database request time
Does anybody have an idea of what is the system doing during the 10 seconds processing time ?
Regards,
Olivier

Hi Graham,
Thank you for your input and thoughts.
I will have to investigate on RZ23N and RZ21 because I'm not used to use them.
I'm used to investigate performance problems with ST03 and STAD.
My system is R/3 4.7 WAS 6.20. ABAP and BASIS 43
Kernel 6.40 patch level 109
We know these are old patch levels but we are not allowed to stop this system for upgrade "if it's not broken" as it is used 7/7 24/24.
I'm nearlly sure that the problem is not an RFC issue because I've found other slow dialog steps for web service calls and even for a SAPSYS technical dialog step of type <no buffer>. (what is this ?)
This SAPSYS dialog step has the following data :
User : SAPSYS
Task type : B
Program : <no buffer>
CPU time                       0 ms
RFC+CPIC time              0 ms
Total time in workprocs    5.490 ms
Response time               5.490 ms
Wait for work process           0 ms
Processing time             5.489 ms
Load time                            0 ms
Generating time                   0 ms
Roll (in+wait) time                0 ms
Database request time          1 ms ( 3 Database requests)
Enqueue time                       0 ms
All hundreds of other SAPSYS <no buffer> steps have a less than 5 ms response time.
It looks like the system was frozen during 5 seconds...
Here are some extracts from STAD of another case from last saturday.
11:00:03     bt1fsaplpr02_PLG RFC     R     3     USER_LECKIT     13     13     0     0
11:00:03     bt1sqkvf_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:04     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     19     19     0     16
11:00:04     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     77     77     0     16
11:00:04     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:04     bt1sqkvf_PLG_18      RFC     R     4     USER_LECDIS     14     14     0     16
11:00:05     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     12     12     0     16
11:00:05     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     53     53     0     0
11:00:06     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     76     76     0     0
11:00:06     bt1sqk2t_PLG_18      RFC     R     0     USER_LECDIS     20     20     0     31
11:00:06     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     12     12     0     0
11:00:06     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     13     13     0     0
11:00:06     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     34     34     0     16
11:00:07     bt1sqkvh_PLG_18      RFC     R     0     USER_LECDIS     15     15     0     0
11:00:07     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     13     13     0     16
11:00:07     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     19     19     0     0
11:00:07     bt1fsaplpr02_PLG RFC     R     3     USER_LECKIT     23     13     10     0
11:00:07     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     38     38     0     0
11:00:08     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     20     20     0     16
11:00:09     bt1sqkvg_PLG_18      RFC     R     0     USER_LECDIS     9 495     9 495     0     16
11:00:09     bt1sqk2t_PLG_18      RFC     R     0     USER_LECDIS     9 404     9 404     0     0
11:00:09     bt1sqkvh_PLG_18      RFC     R     1     USER_LECKIT     9 181     9 181     0     0
11:00:10     bt1fsaplpr02_PLG RFC     R     3     USER_LECDIS     23     23     0     0
11:00:10     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     8 465     8 465     0     16
11:00:18     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     18     18     0     16
11:00:18     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     89     89     0     0
11:00:18     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     75     75     0     0
11:00:18     bt1sqkvh_PLG_18      RFC     R     1     USER_LECDIS     43     43     0     0
11:00:18     bt1sqk2t_PLG_18      RFC     R     1     USER_LECDIS     32     32     0     16
11:00:18     bt1sqkvg_PLG_18      RFC     R     1     USER_LECDIS     15     15     0     16
11:00:18     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:18     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     14     14     0     0
11:00:18     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     69     69     0     16
11:00:18     bt1sqkvf_PLG_18     RFC     R     5     USER_LECDIS     49     49     0     16
11:00:18     bt1sqkve_PLG_18     RFC     R     5     USER_LECKIT     19     19     0     16
11:00:18     bt1sqkvf_PLG_18     RFC     R     5     USER_LECDIS     15     15     0     16
The load at that time was very light with only a few jobs starting :
11:00:08 bt1fsaplpr02_PLG RSCONN01                     B 31 USER_BATCH     39
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 31 USER_BATCH     34
11:00:08 bt1fsaplpr02_PLG /SDF/RSORAVSH                B 33 USER_BATCH     64
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 33 USER_BATCH     43
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 34 USER_BATCH     34
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 35 USER_BATCH     37
11:00:09 bt1fsaplpr02_PLG RVV50R10C                    B 34 USER_BATCH     60
11:00:09 bt1fsaplpr02_PLG ZLM_HDS_IS_PURGE_RESERVATION B 35 USER_BATCH    206
I'm thinking also now about the message server as there is load balancing for each RFC call ?
Regards,
Olivier

How to Use synchronous RFC calls during test run for remote accesses

there is a Setting for the usage of RFC accesses from a tested system
using eCATT.
'X' - Use asynchronous RFC calls during test run for remote accesses
' ' - Use synchronous RFC calls during test run for remote accesses
I developed an eCATT as following :
SAPGUI ( SAPGUI_1 , Target_system_1 ).
SAPGUI ( SAPGUI_2 , Target_system_2 ).
My question is how to run the eCATT in a synchronous RFC calls
PS: I do not want to change the Target_system to the same one in the
above script of ecatt.Because I need to run it in 2 different Target
systems sometime.
for example, I give a Target_system_3 when run this eCATT
I want the SAPGUI_1 and SAPGUI_2 run the Target_system_3 but not the
Target_system_1 or Target_system_2 .
Could you please tell me how to make it without the changes in script?
Edited by: Weitong Liu on Mar 24, 2011 9:44 AM

Hi Liu,
Weitong Liu wrote:
> ' ' - Use synchronous RFC calls during test run for remote accesses
This is the standard option value. Asynchronous are not the standard way and used only for very special purposes.
Weitong Liu wrote:
> I developed an eCATT as following :
> SAPGUI ( SAPGUI_1 , Target_system_1 ).
> SAPGUI ( SAPGUI_2 , Target_system_2 ).
> My question is how to run the eCATT in a synchronous RFC calls
The commands will be executed in sequence. So each call will be synchronously replayed against TS1 and TS2.
What is you issue with this standard procedure?
Kind regards,
Christoph

Best approach for RFC call from Adapter module

What is the best approach for making a RFC call from a <b>reciever</b> file adapter module?
1. JCo
2. Is it possible to make use of MappingLookupAPI classes to achieve this or those run in the mapping runtime environment only?
3. Any other way?
Has anybody ever tried this? Any pointers????
Regards,
Amol

Hi ,
The JCo lookup is internally the same as the Jco call. the only difference being you are not hardcoding the system related data in the code. So its easier to maintain during transportation.
Also the JCO lookup code is more readable.
Regards
Vijaya

System error during RFC call BAPI_FIXACCOUNT_GETLIST

Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1.     Run TCode PC00_M99_CIPE
2.     Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3.      Check in SM21: NiConnect Unsuccessful, Return Code: -0003
                    Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
Fung

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

Update from RFC call cor8

One of the RFC calls has not updated vbk table. This came up as an issue, which is found in sm13.
what exactly needed to be checked and what correctivie action required to solve the issue.
Transaction from where RFC was made: COR8
Needed advise please.

You meant that user use COR8 inside SAP but somehow there is an error during save? It can be the purely technical problem (database problem). What is the error message in SM13? Can you perform repeat update successfully?
I think you are asking about further simulation of the particular RF call using an simulation icon to see whether the further call works well or not? Is this your question.
It is quite difficult to analyze the problem. Maybe if you can post the screen shot (SM13 error log) somewhere and let us see. It may help.
I can send you the screen of tthe issue but for this i would request you to provide your email id., if possible. So that i will be able to send the details screen.

RFC Call to R/3 from EBP during creation of SC from CCM

Similar Messages

Maybe you are looking for