RFC call failing due to UNICODE implementation
Hi
We are trying to connect to a SAP system using the JCO (SAP-JAVA Connectivity). We are passing the user name as an input parameter and in turn the SAP system send back the no. of item (ABAP Type integer) pending for the user name to the java and its inserted/updated in Oracle DB (which does accept the unicode characters).
It was all wokring fine untill the SAP system has been migrated to Unicode upgrade. Now the RFC call is getting failed from our system. On analysis we found with debug, that the user name is not getting accepted by the SAP system and throwing the error -says Exception in thread "main" com.sap.aii.proxy.framework.core.BaseProxyException: Conversion error between two character sets., error key: RFC_ERROR_SYSTEM_FAILURE and at the SAP end the error says "Conversion of "UNAME" from code page 4103 to 4102 is failed". The unicode change in SAP system cannot be reverted back due to some constraints.
Can you please help, how can we pass the user name as encoded in character set 4102 or any other solution so that it can be accepted by SAP and run the Function module and return the data.
Many Thanks
Snehil Joshi
Check RFC destination in Tx SM59. You must have one tab for unicode settings.
Regards.
Similar Messages
-
RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABHHi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart -
Lync server call failed due to network issues
hi,
i receive an error while making a lync call to an internal user
"call failed due to network issues"
i have two ip's installed on My NIC but when i remove one ip of the ip's from
my nic, everything seems to work fine.
Kindly helpHello Matt,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way.
Thanks -
Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag -
RFC call failed : Error when opening an RFC connection
Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Rajahi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points -
Call Failed due to FADING ??
Hi, I'm hoping someone out there can help me!
I sent my Torch 9810 in to Rogers for repair (phone was overheating). Today they sent me a new replacement, because they couldn't fix the old one....but now the new one can't send or receive calls.
I keep getting the error message "Call Failed due to Fading". Is this a network or a hardware problem?
Rogers said it was the network and tech support said it could be the hardward....any suggestions?
thanxHey myrad,
Sorry for the delay in replying.
So if you're using EDGE/GPRS (2G) the phone calls are working perfectly. It sounds to me you have a radio issue now but to make sure it is a radio issue, check the following:
1. Are you using the most up to date device software from www.blackberry.com/update or from Rogers?
2. If not, I suggest updating and then try to reproduce the issue.
3. If you are running the latest software then I suggest contacting Rogers to get a replacement since it is a radio issue.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Call failed due to network issues
call failed due to network issues lync 2010 client. even when i'm trying to do a test call from my system, same error comes.
Please, share more details on error from logs. Also check firewall ports.
The Media Relay Authentication Service (MRAS) is responsible for notifying the Lync client of the STUN and TURN IP address for ICE. This service
run on UDP port 3478.
To check that the UDP port is open on the firewall between the Internal Lync clients and the Edge server running this service you can use the Microsoft tool PortQry
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Hello,
I am setting up a very simple scenario where I am making a sychronous RFC call to a BAPI in R/3 (Version 4.6c) from an XI Sandbox (Version 7.0).
I have the RFC Communication channel properly configured, or so I think, and have verified everything else as well. I initiate the message from the Runtime Workbench and it shows with status "Successful" in the Message Monitoring section. However, when I look in SXMB_MONI transaction I am unable to find a response message from the BAPI coming back in the payload. I notice that even though the scenario is synchronous, the "Type" column in the SXMB_MONI transaction results shows it as "Asynchronous". Also, in the message details there is a Payload (which I am sending when I create and send the message from the RWB), in every step, until the Call Adapter step. After that there is no payload in the Call Adapter or the Response steps, just the SOAP Body with the Manifest.
In the message details I see that the <SAP:Processing Mode> entry is set to "Asynchronous" rather than "Synchronous".
Does anyone have any idea why this is so?
Thanks,
Murtaza.
Message was edited by:
Murtaza MadraswalaHi Amitabha,
I looked in the location you suggested and got a list of "Success" messages. These are listed below for you to look at:
Time Stamp Status Description
2007-06-18 15:17:54 Success Message successfully received by messaging system. Profile: XI URL: http://camapox1:50100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-06-18 15:17:54 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-06-18 15:17:54 Success Message successfully put into the queue.
2007-06-18 15:17:54 Success The message was successfully retrieved from the receive queue.
2007-06-18 15:17:54 Success The message status set to DLNG.
2007-06-18 15:17:54 Success Delivering to channel: GeneratedReceiverChannel_RFC
2007-06-18 15:17:54 Success MP: entering
2007-06-18 15:17:54 Success MP: processing local module localejbs/RfcAFBean
2007-06-18 15:17:54 Success RFC adapter received an asynchronous message. Attempting to send tRFC for Z_SD_RFC_ATP_WRAPPER with TID XIlc32S1tf4Togkm0mRWaHRG
2007-06-18 15:17:55 Success MP: leaving
2007-06-18 15:17:55 Success The message was successfully delivered to the application using connection RFC_http://sap.com/xi/XI/System.
2007-06-18 15:17:55 Success The message status set to DLVD.
The problem that I am seeing is that this is posted under the list of Asychronous Received Messages. Thats something I am just unable to understand. I have a Synchronous Outbound Interface defined and an RFC Communication Channel, which is Synchronous as far as I know. So why is the processing mode for the message being chosen as Asynch? Which config setting have I missed that is causing this problem? I am just unable to find the answer so far.
I appreciate your help. Please let me know if you have any clues.
Thanks,
Murtaza. -
RFC call fails while implementing Inovis EDI. ' NO AUTORITY FOR CONNECTION
Hi All,
We are implementing 'Inovis's' EDI solution. I have narrowed done the error to note 618941. It is telling me to modify the SEC file to allow a RFC_REMOTE_EXEC call.The SEC file came down in the form of a physical file. So I am really not sure what to do here. I don't know where this file should reside. Any ideas?
Thanks!!
DianaI figured it out. Thanks.
-
RFC Call failing at SAP because of output schema (Response) sent from Biztalk
Hi,
I have deployed the Request/Response message with SAP. Getting RFC Request from SAP in a Request-Response Port. After processing the message, sending it throght same port.
At SAP side the reponse got failed for below error:
Action in response message is
http://Microsoft.LobServices.Sap/2007/03/Rfc/Z_TEST_RFCResponse. Expected Action is
http://Microsoft.LobServices.Sap/2007/03/Rfc/Z_TEST_RFC/response.
I checked my schema file (created by Consume Adapter Services ), there it shows action as
http://Microsoft.LobServices.Sap/2007/03/Rfc/Z_TEST_RFC/response. But still why it is passing RFCResponse at SAP end?
Thanks, Girish R. Patil.Hello Girish,
Since you are using receive request-response port, it is not possible to mention the action in physical port,
So, You need to assign the Action in Orchestration...For that you use the message assignment shape...inside it write the following code...this will work...!
Response(WCF.Action) = "http://Microsoft.LobServices.Sap/2007/03/Rfc/Z_TEST_RFC/response";
Where Response is name of the response message...!
Regards,
Naveen. -
Oracle stored procedure call failed,but not captured by the error handling
Hi All,
I have a unix shelll script which calls a stored proc in Oracle, the stored proc call failed due to "ORA-01033: ORACLE initialization or shutdown in progress".
But it is not captured in the error handling block, Any ideas why this had happened?
SQL file had : my_test_sql.sql
exec my_proc(..............);
Unix shell script has this call:
sqlplus -s my_user/my_pwd@db1 @my_test_sql.sql
if [[ $? -ne 0 ]]; then
echo "failed"
exit 1
else
echo "success"
fi
If i execute the above shell, I'm getting the following
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SP2-0306: Invalid option.
Usage: CONNÝECT¨ Ýlogon¨ ÝAS SYSDBA¨
where <logon> ::= <username>Ý/<password>¨Ý@<connect_identifier>¨ | /
success.
This puzzled me, any pointers?The $? status variable shows the return code of the last command executed. It will be difficult to determine what the exit status of your sql script is without knowing the script. Do you have any "WHENEVER SQLERROR EXIT" statements in the script?
The ORA-01033 error happens when the database is not open, perhaps in recovery, or startup or shutdown is halted due to a failed or full disk, error in archiving or writing to redo, etc. -
Backup to remote stage failed due to RFC error
Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code <b>DBIF_RSQL_SQL_ERROR</b>.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
ThomHello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
<b>Database:</b>
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
<b>Background:</b>
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
<b>Syslog</b> : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom -
Ecatt script fails due "Error in OLE API method Call" error
Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN. -
Passing chinese character from RFC call between unicode & non unicode syst.
Hi Experts,
I am making a RFC call from an ABAP in non unicode system to a Function module in Unicode system and filling the itab fields in ABAP by using move statement and using offset in order to populate amount fields correctly from flat structure tables returned by function module. But i am facing problem in getting chinese characters correctly in return from the Remote Function Module.
CALL FUNCTION 'ZFXX_GET_CLR_OI'
STARTING NEW TASK W_TASKNAME
DESTINATION S_RFCDES-LOW
PERFORMING F3100_GET_RFC_DATA ON END OF TASK
EXPORTING
P_WAERS = P_WAERS "Screen Curr
P_AUGDT = P_AUGDT "Clearing date
P_BUKRS = P_BUKRS "Comp Code
TABLES
T_SEL_TABLE = T_SEL_TABLE
T_OUTPUT = T_MCDATA
T_ERRORS = T_EMCDATA
EXCEPTIONS
COMMUNICATION_FAILURE = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
MOVE : t_mcdata1-line+0(32) TO t_succs-awsys,
t_mcdata1-line+32(4) TO t_succs-bukrs,
t_mcdata1-line+36(10) TO t_succs-belnr,
t_mcdata1-line+46(4) TO t_succs-gjahr,
t_mcdata1-line+50(1) TO t_succs-shkzg,
t_mcdata1-line+51(2) TO t_succs-bschl,
t_mcdata1-line+53(4) TO t_succs-gsber,
t_mcdata1-line+57(16) TO t_succs-dmbtr,
t_mcdata1-line+73(16) TO t_succs-wrbtr,
t_mcdata1-line+89(5) TO t_succs-pswsl,
t_mcdata1-line+94(6) TO t_succs-vbund,
t_mcdata1-line+100(10) TO t_succs-hkont,
t_mcdata1-line+110(10) TO t_succs-prctr,
t_mcdata1-line+120(16) TO t_succs-dmbe2,
t_mcdata1-line+136(20) TO t_succs-txt20.
APPEND t_succs.
Can anybody suggest or advice me on it ? Any help or suggestion would be appreciated.
Thanks in advance,
Akash.
-
Hello.
We are upgrading our NW 7.01 to NW 7.3 ABAP.
In Postprocessing phase MAIN_POSTP/CREATE_UPGEVAL we encounter the following error:
ERROR: RFC of "subst_save_upgeval_db" failed
key: ERROR UPDATE
message: EXCEPTION UPDATE_ERROR RAISED
Here is the troubleshooting ticket:
This trouble ticket was created by SAPup on 20111125120155
SAPup broke during phase CREATE_UPGEVAL in module MAIN_POSTP / Post Processing
Error Message: RFC call to subst_save_upgeval_db failed with key UPDATE_ERROR (UPDATE_ERROR): EXCEPTION UPDATE_ERROR RAISED
Summary of SAPup:
SAPehpi Release: lmt_002
SAPehpi Version: SAPup release lmt_002 version 41.001
Start Release: 701
Target Release: 730
Summary of host system details:
SID: TA1
Host: sapta1
MS Host: sapta1
GW Host: sapta1
Start Path: /usr/sap/TA1/DVEBMGS02/exe
Kernel Path: /usr/sap/TA1/DVEBMGS02/exe
Summary of operating system details:
OS Type: Linux X86_64
OS Version: 2.5
Summary of database details:
Database Type: ora
Database Version: 11.2.0.2.0
Summary of RFC details:
Host: sapta1
GW Host: sapta1
Client: 000
Destination: TA1
Language:
System No.: 02
here is the PHASES.LOG:
1 ETQ201 Entering upgrade-phase "CREATE_UPGEVAL" ("20111125120352")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_POSTP/CREATE_UPGEVAL'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'STORE_DB'
4 ETQ359 RFC Login to: System="TA1", Nr="02", GwHost="sapta1", GwService="sapgw02"
4 ETQ232 RFC Login succeeded
Do you have anu ideas ?Here is the dev_rd log:
Fri Nov 25 14:07:04 2011
***LOG S23=> GwIDisconnectClient, client disconnected (020) [gwxxrd.c 10423]
***LOG S74=> GwIDisconnectClient, client disconnected ( sapta1) [gwxxrd.c 10434]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 10451]
***LOG S0I=> GwIDisconnectClient, client disconnected ( SAPCPIC) [gwxxrd.c 10464]
LOCATION SAP-Gateway on host sapta1.sap.fr.alten.com / sapgw02
ERROR connection to partner 'localhost.localdomain:0' broken
TIME Fri Nov 25 14:07:04 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 4850
DETAIL NiIRead: 127.0.0.1:0
SYSTEM CALL recv
COUNTER 58
Maybe you are looking for
-
HT1473 How can I move my iTunes software from one computer to another?
I purchased a new PC. I tried copying my iTunes software to the new computer, but it wouldn't open. So I downloaded a new copy of iTunes to the new computer. When I tried to sync my iPhone to the new iTunes, it wouldn't allow me to put the music o
-
Dear All, I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow: AFKO--AUFNR = MSEG--AUFNR AFKO--PLNBEZ = MARA--MATNR I have included all the fields from MSEG and other all fields from MARA and AFKO. Th
-
Very nice OpenSSH 4.3p2 packages for 8,9,10
I found the sunfreeware packages to be lacking, a bit. Specifically, PAM support was not working. Also, post-installation config required manual steps (no init.d script or symlinks, had to create sshd user, etc). Anyway, a colleague made some very ni
-
OEM 2.2 not discovering nodes
Between the space of 2 days, OEM has chosen to not refresh/drop/discover any nodes. It tries to but stalls out at "Discovery Wizard, step 2 of 2: Progress" at 96%. It is 96% for all nodes, remote and local. If allowed to sit long enough, the OMS serv
-
All reports stay in c:\temp, how to remove them?
Post Author: [email protected] CA Forum: .NET Dear experts, All the opened reports stay in the tempfile on our server. when there are 75 files opened I get the error "Load report failed". When I search on the net everyone suggests to use ReportDo