RFC error for Transaction Launcher to launch a CRM ABAP report on WEB UI

Hi all,
My Task is to assign a custom CRM report on the web ui.
I have created a transaction for this and using the transaction launcher wizard to assign it as a link on web ui .
In the transaction launcher wizard , In the 'Define Further Technical Details' i have entered the
Transaction Type as 'BOR Transaction'
Logical system : my current system crm client which is QCCCLNT703
BOR OBJECT TYPE : tstc_uif (also tried with TSTC )
Method Name : EXECUTE
When i try to click on the report on WEB UI, it gives me a status message saying the ''RFC Destination is not set up for QCCCLNT703'.
Can you please advice me on how to do this . I guess the issue is with the Logical system set up .

Hello,
I think you have rightly pointed out the reason of the error. You must have maintained the logical system 'QCCCLNT703' using transaction CRMS_IC_CROSS_SYS. However you also need to maintain the same entry in transaction SM59 with name RFC destination name as 'QCCCLNT703'.
I hope this would fix the issue.
Thankx,
Amit Sen

Similar Messages

RFC Error for TMSADM After Executing RSRFCCHK

Hi,
I'm using ECC6 and running RSRFCCHK to check our RFC destinations. Everything is working fine except that I'm getting an RFC no authority error for function group SYST for TMSADM. I've reset the buffer by using RSET and even executed report RSUSR405 but the error still occurs on both times. I did try giving it access to function group SYST and it work perfectly. However, I don't know why it's causing the error in the first place and this is what I would like to figure out first. I'm hesitant to give it the access without knowing the reason why.
Has anyone encountered this error before? Can anyone help on how to solve this problem?
Thanks,
JB
Edited by: JB Ramos on May 6, 2009 7:12 AM

It is not necessarily an error for an RFC call to fail... To ensure that the TMSADM has the correct authority you should not need to reset the buffers. Logon to client 000 of your transport domain controller (should ideally be production...) and reset the user TMSADM in transaction STMS via the "Extras" menu. That should be sufficient.
RSRFCCHK is using a function module from the group SYST to obtain information about the connections. But those connections do not have to include FM's from SYST to perform that which they are designed to do and if I remember correctly then for the TMSADM it does not.
Specifically in this case, the TMSADM user performs some logistical tasks in the STMS but requests of the human person operating the STMS that they should logon themselves when performing tasks which are considered "critical" - or at least sufficiently critical that the TMSADM should not be able to complete it on it's own. An example would be to Import a transport request.
As the TMSADM is not sufficiently authorized to perform these functions, the system calls for the dialog user to "remote login" to the system when the TMS attempts to do the task. This is a function module in SYST called something like RFC_REMOTE_LOGIN or similar.
Cheers,
Julius

Transaction Launcher to launch a ABAP report

I have to assign a SAP CRM ABAP report to Web UI. I am trying to create a Link using Transaction Launcher and in "Enter Further Technical Details" trying to use BOR Type as "ZTSTC" and assign it Method "Execute" which i cannot find.
SAP IMG help directs to use "TRDIR" for BOR type's which i cannot assign.
Any help is greatly appreciated
Thanks
ARK

Hi all,
Iam trying to create a link for a CRM report program on web ui using transaction launcher wizard. In the 'Define Further Technical Details' i have entered the
Transaction Type as 'BOR Transaction'
Logical system : my current system crm client which is QCCCLNT703
BOR OBJECT TYPE : tstc_uif
Method Name : EXECUTE
When i try to click on the report on WEB UI, it gives me a status message saying the ''RFC Destination is not set up for QCCCLNT703'.
Can you please advice me on how to do this . I guess the issue is with the Logical system set up .
My Task is to assign a custom CRM report on the web ui.

Test RFC connection for Logical port

Hi,
I've created a new Proxy class in my development by consuming the WSDL file and attached it to a package.
Also i have created Logical port based on the WSDL file in SOAMANAGER. But when I test the RFC connection which gets automatically created
I get message u2018Create failed: Argument not foundu2019, If any one has experienced this problem please guide me.
Thanks,
Ganesh

Hi Bhaskar
Kindly refer the SAP Note with RFC error
1906868 - Transaction program not registered error happened during connection test of Java Idoc adapter
1989478 - IDoc_AAE 'Program XI_IDOC_DEFAULT_PID not registered'
Regards
Sriram

Database error for ADDR_PERS_COMP_COMM_GET 0

Dear All,
In my organization end user is getting error Database error for <ADDR_PERS_COMP_COMM_GET> <0> while trying to fetch a report through background.
Pls help , it's very urgent
Thanx in advance
Abhishek

Hi Abhishek,
Try to debug this batch job and see what is the problem.
Put a break point in ur program.In Sm37 select already executed/cancelled batch job. Type jdbg in command prompt and press enter control will go to the program. Now debug and see what is happening.
Most probably it is some thing that needs to be corrected by BASIS peopple. So get in touch with them also.
Hope it will be helpful.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jul 5, 2008 12:58 PM

Findinf report in Report painter for transaction S_PL0_86000030

Hi ,
For transaction <b>'S_PL0_86000030'</b> am finding corresponding report in report painter. Transaction S_PL0_86000030 is nothing but trnsaction START_REPORT with
default value for D_SREPOVARI-REPORTTYPE as <b>'RE'</b> and
for D_SREPOVARI-EXTDREPORT as <b>'FBRG01FAGLFLEXS 0SAPBLNCE-01'</b> .
How do i get the corresponding report in report painter ?
Thanks and Regards,
Amit Raut

Hi,
Transaction FSi2 takes you there.
Alex-

RFC Call for EarlyWatch

Hi,
What is the RFC Call for EarlyWatch with regards to extracting a monitoring report?
Thanks
John

Hi John,
Solution Manager can use its own BI or a remote BI.
If it is local the RFC will be 'NONE'
The table is E2E_WA_CONFIG
Type = SAP_BID
LINE = 1
STRING = NONE
If there is an entry of the Type =SAP_BID_M it will overrule SAP_BID
The STRING= 'value' will be the RFC that is used.
Both SAP_BID abd SAP_BID_M are found in Table E2E_WA_CONFIG
Regards,
Paul

RFC Errors in GUIXT

Hi ,
How solve the RFC Errors , I am working on GUIXT ,during script deployment in SAP Web Repository , I am getting below RFC errors , have no idea
about this error. Please give me directions to sort this out. Apologies If I am posting this in wrong forum.

Hi
I can find the sapdev2 in internal connections.
I can post this in basis forum ,but I am afraid I don't have a basis person ,seems I have to sort this on my own & with help of SDN.

Hidden Report Viewer Confiugration Error on aspx pages that use report viewer web control

I try to fix the problem. The error below is embedded on aspx pages that use report viewer web control. Please note that the div element is hidden, and the reportviewer is displaying correct contents.
Div element hidden on aspx page
<div id="ReportViewer1_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
</div>
I tried adding the two elements to web.config, but to no avail.
Add below to system.web/httpHandlers
<add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
or add below to system.webServer/handlers for Internet Information Services 7 or later.
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
The required assemblies below are installed under C:\Windows\assembly folder. I have installed both Microsoft ReportViewer 2010 Redistributable, and 2008 SP1.
Microsoft.ReportViewer.WebForms, version 10
Microsoft.ReportViewer.Common, version 10
Below is the whole web.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="car" value="myCar" />

</appSettings>
<system.web>
<httpHandlers>
<add verb = "*" path = "Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

</httpHandlers>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.Build.Framework, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</buildProviders>
</compilation>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
</system.webServer>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="WebService1Soap" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:58269/WebService1.asmx" binding="basicHttpBinding"
bindingConfiguration="WebService1Soap" contract="ServiceReference1.WebService1Soap"
name="WebService1Soap" />
</client>
</system.serviceModel>
</configuration>
Any idea?
Update:
IIS is7.5, AppPool is Integrated.
I have tried below, none of them works:
1) Add it only to system.web\httpHanders. Changed AppPool to classic, still got hidden error.
2) Add it only to system.webServer\handlers. Integrated mode,still got hidden error.
3) Add both to both element. Integrated mode, still got hidden error.

Hi Kingofwebguru,
According to your description, when you use reportviewer control, you got the error message: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file.
To troubleshoot the problem, please refer to the following steps:
Click Start, click Run, then type InetMgr.exe and click OK.
Click plus sign next to server name to expand it.
Click Application Pools in left pane.
In Application Pools list, click DefaultAppPool.
In the Actions pane, in Edit Application Pool section, click Edit Settings to check the Pipeline mode.
Configuration settings for the HTTP handlers are specified in the system.web/httpHandlers element and the system.webServer/handlers element. of your application Web.config file. The handler specified in system.web/httpHandler is used by Internet Information
Services (IIS) 6.0 or IIS 7.0 in Classic mode, whereas the handler specified in system.webServer/handlers is used by IIS 7.0 in Integrated mode. To use IIS 7.0 in Integrated mode, you must remove the HTTP handler in system.web/httpHandlers. Otherwise, IIS
will not run the application, but will display an error message instead.
For more information about Web.config Settings for ReportViewer, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251661.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Logical System for Transaction Launcher??

Dear all,
Should we define logical system for Transaction Launcher to call transactions from back end ECC system. If yes, why we do this and where we maintain the logical systems?
Can we use existing ECC logical system, whcih mapped with SAP CRM system?
Where can we define the logical system for Transaction Launcher?
Please clarify my doubts to complete this process successfully, your suggestions will be highly appreciated.
Thank you
Raghu ram.

Hi Raghu Ram
In order to call an transaction from ECC, you should choose the logical system of the ECC System itself. You will get the information regarding the logical name assigned to your ECC System using the tcode SM59. The logical system must have been defined for the ECC System before you integrated CRM to backend ECC.
Check the tcode SM59 and you will find logical name of your ECC System there.
And yes, you are suppose to use the existing ECC logical system, which is mapped with SAP CRM system.
Hope this helps
Regards
Rekha Dadwal

RFC error while publishing dialog transaction

Dear All,
I had made an internet service in a dialog pool.But while publishing it i am getting RFC errors.Can you tell me what are the prerequisites for designing an internet servise as i want my module pool page to be displayed through internet browser.
Pratighya Jain

Hi Pratighya,
you got RFC-errors during the publishing of an internet service?
I assume you are talking about the integrated ITS.
Ok, that is what will happen if you publish an internet service:
the templates are copied to the the table containing the published ones
the MIME object are activated in order to be loadable by the icman - the
Web server part of the WebAS
The template caches on each application server of the system are invalidated.
For doing the last part we need RFC connections between the application servers,
since the order to refresh the cache is send using a function module via RFC. Is
the system configuration clean? Are all of the servers reachable by RFC?
You may check the state of the template caches using the transaction SITSPMON.
hope this helps
Tobias

Launch Error - This file cannot be launched

Hi all,
I renamed a class file in a flash build and now every time I try to debug my project (cmd+F11) I get an error window saying Launch Error - This file cannot be launched.
I have tried wiping the project and moving the files in to a new one and also restarting FB4 but with no luck. I have also tried setting up a brand new blank project and this will not launch either.
The problem seems to only be with Flash projects as a new Flex project runs ok.
I am running Flash Builder 4 , Flash CS5 on a Mac 10.6.4 and debugging in Google Chrome 7.0.517.41
Any suggestions?
Cheers

There is no adl listed in my list of active processes in Activity Monitor. I have tried rebooting my machine, restarting all my software and projects and cleaning my projects. No luck yet.
If I just switch to flash and run the fla directly it works fine so it must be Flex specific.
Cheers for the suggestionsso far . Keep em coming if you have them

Error message: RFC system error for destination GTADIR_SERVER (SGSUB104)

Hello people,
I'm using Sneak Preview SP12 and getting frequently this error, for example when loading some Web Dynpros already in the system, or creating Z tables.
If anyone knows how to solve or the cause please help.
Procedure for solution in message's long text is in german so I don't understand it.
Many thanks

I just patched my system to SP12 as well and suddenly received the same message. After searching this forum I only found you having the same problem. While I understand German, the message is meaningless (tells you to try later again and if problem persists, then ask your system admin). In order to get around this message (after all this missing RFC connection is not critical since after confirming it you can proceed without any problems), I simply created an RFC connection of the name GTADIR_SERVER pointing to my very own NSP system.
Call transaction SM59
Select ABAP connections and hit the create button
Enter GTADIR_SERVER as the RFC connection
Put your system name and system number (like your settings in SAP GUI) in Target Host and System Number fields
On tab Logon&Security provide client/user id/password
Usually I prefer to understand why I need to do what I do. I do not know why we need (i.e. why SAP) call(s) this destination, but my gut feeling tells me it is uncritical the way I got around it. If anyone in this forum can shed some more light on the WHY, this would be great ...
Best, Jurgen

Http RFC destination for ECC to PI Connection Error

Hi,
While doing the proxy runtime configuration http RFC destination for ECC to PI .
I configure the RFC destination as below ---
Target Host -- PI Host
Service No -- 50000
Path Prefix --- /sap/XI/engine/?type=entry
Login Security Details
User Id -- PI user id
Password --- PI password
While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
I checked T-code in ECC system SMICM and ICM is in green status and I checked the services are activated in SICF transaction.
Please let me know how to resolve this issue.
regards,
Rohit

Hi Rahul,
I checked all service are activated in SMICM and I configured the FQDN also.
Now I cofigured the Service No --- 8000(http port no of PI) instead of 50000(J2EEport no of )
Target Host --- hostname
and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
pls let me know is it correct configured or not.
regards,
Rohit

Transact RFC error

Hi Gurus,
I am getting one issue while loading the data thru infopackage.
While loading the data in 3.5 flow for some souce system it is taking long time
and givig me transact RFC error. I have checked the source system connectivity and it is fine.Although the status is yellow during the load but at the end of the load it turns to red and it gives me below mentioned error:
Missing data packages for No selection information arrived from the source s
Diagnosis
Data packets are missing from No selection information arrived from the source s. BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path "Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In particular, check the remote user authorizations in BI.
Kindly let me know your suggestion in this issue.
Thanks in advance.
Amit

Hi
This error would normally occur, if at the time of processing, the data packets get stuck
To check for stuck trfc follow the path
Environment -> Transact. RFC -> Source System
there, check if trfc recorded, then it means, it is stuck, slecect that particular record and press F6 to execute the LUW.
If this is not the case, check the job overview in the source system.
IF you find ARFCSTATE = loading/sysfail, it means the trfc is stuck ..
you can check the datapacket number from there, and try mannual update for those partiular data packets.
Or else, sometimes, the packet itself doesnt arrive in BW, because of connection problem during the processing of few packets, ands later when you check, it seems fine.
In such cases simply repeat the load
Hope this helps
Regards
Shilpa

RFC error for Transaction Launcher to launch a CRM ABAP report on WEB UI

Similar Messages

Maybe you are looking for