RFC error while publishing dialog transaction
Dear All,
I had made an internet service in a dialog pool.But while publishing it i am getting RFC errors.Can you tell me what are the prerequisites for designing an internet servise as i want my module pool page to be displayed through internet browser.
Pratighya Jain
Hi Pratighya,
you got RFC-errors during the publishing of an internet service?
I assume you are talking about the integrated ITS.
Ok, that is what will happen if you publish an internet service:
the templates are copied to the the table containing the published ones
the MIME object are activated in order to be loadable by the icman - the
Web server part of the WebAS
The template caches on each application server of the system are invalidated.
For doing the last part we need RFC connections between the application servers,
since the order to refresh the cache is send using a function module via RFC. Is
the system configuration clean? Are all of the servers reachable by RFC?
You may check the state of the template caches using the transaction SITSPMON.
hope this helps
Tobias
Similar Messages
-
Error while comitting a transaction in oSB. The following is the error stack
Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
Error while resubmit the transaction in Oracle 10g B2B
Hi All,
I am facing the below error while resubmitting the transactions
bash-3.00$ java oracle.tip.adapter.b2b.data.ReSubmit
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/adapter/b2b/data/ReSubmit
bash-3.00$
Regards
sekharHi Sekhar,
Make sure that you are setting the environment first by running Midtier_Home\ip\install\setenv.bat OR Midtier_Home\ip\install\setenv.sh (according to your OS). Run the resubmit command after executing this setenv file.
Regards,
Anuj -
Getting error while publishing workflow using SP designer for SharePoint 2013
Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error while posting FB50 transaction code
Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
KishoreHi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat -
Error while posting tresury transaction
hi gurus,
i got the error , while excuting treasury transaction:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '1000' has currency type '10'. This currency type has the currency key 'SAR' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'EUR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '1000' must have currency key 'EUR' when the data is transmitted.)
Kinldy help to resolve this issue.Hi All,
I am facing the same issue..Can U pls help me in resolving the error.
ERROR:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '6242' has currency type '10'. This currency type has the currency key 'SGD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'INR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '6242' must have currency key 'INR' when the data is transmitted.
Regards,
Venkat -
Error while publishing a service with WSPUBLISH: Error publishing Endpoint
Hallo,
I've a problem while publishing a service which a had created via proxy. I configured the service and one endpoint (binding) in SOAMANAGER. When I publish the service in WSPUBLISH I get the error:
'Error publishing Endpoint for SD : <Proxy>, Service : <Service>, EP : <Endpoint>.
with details:
'10160A save request exceeded the quantity limits for a given structure type .#Number of BusinessEntities exceeds your limit of 1 (2)'
In the Service Registry I can find the service but without endpoints.
Does anybody know what happend ?
We use a SAP NetWeaver 7.10 with SP05 (SAPKB71005) but the same error happens if I publish a service from a CRM 5.0 with SP15 (SAPKB70015) to the Service Registry of the 7.10
ChristophThis is my steps to publish ES to SR:
1. Create RFC destination in SM59
2. Create ES Parameter in WSPARAM
3. Create logical port for SR in LPCONFIG
4. Release Web Service for SOA Runtime in WSCONFIG
5. Publish ES in WSPUBLISH.
When i was using SOAMANAGER to manually create the endpoint, the endpoint in the SR doesnt works though.
eg, Business Administration -> WS Administration -> Search for CRM_BPBASICDATABYIDQR -> Apply selection -> Configuration -> Create Service -> enter new service name and new binding name -> user id/password for HTTP Authentication -> save.
It works after i released it in WSCONFIG (ya, i know it's old way) and re-publish.
-julius -
Error while setting up Transactional Replication
Hi Team,
I am getting below error while configuring Transactional Replication.
Specifically, when I started configuring the distributor that when I am getting below error. I am getting this in GUI as well TSQL script as well.
SQL Server could not configure 'TEST-PC\SQL2K8' as a Distributor.
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Destination path D:\SQL2K8DATA is not valid. Unable to list directory contents. Specify a valid destination path.
Changed database context to 'master'. (Microsoft SQL Server, Error: 14430)
Background of the error.
========================
I installed 3 sql instances of "SQL Server 2008 Developer edition, SP3 (x64)".
I started configuring a remote distributor using one of the instance and error started popping up.
Initially I had the replication running fine and I removed it and tried to reconfigure distributor thats when the error starting popping up.
The folder physically exists and the service account has full permissions and I have logged in as service account and trying to setup Transactional Replication.
He is local administrator on the box and also sysadmin login at sql server level.
Not sure why this error is popping up.....
After wasting a lot of time. I tried to install 3 new fresh instances with same service pack level i.e. sp3, but still the error remains the same.
Appreciate if anyone can guide me resolving this issue.
Thank you.Hi Brandon,
I generated the script and tried again. No Luck. It is throwing error at creation of distribution database itself i.e. exec sp_adddistributiondb .
/****** Scripting replication configuration. Script Date: 2/25/2014 11:43:31 AM ******/
/****** Please Note: For security reasons, all password parameters were scripted with either NULL or an empty string. ******/
/****** Installing the server as a Distributor. Script Date: 2/25/2014 11:43:31 AM ******/
use master
go
exec sp_adddistributor
@distributor = N'TEST-PC\S2',
@password = N'123'
GO
exec sp_adddistributiondb
@database = N'distribution',
@data_folder = N'C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data',
@log_folder = N'C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data',
@log_file_size = 2,
@min_distretention = 0,
@max_distretention = 72,
@history_retention = 48,
@security_mode = 1
GO
Error Message :
Msg 14430, Level 16, State 1, Procedure sp_adddistributiondb, Line 227
Destination path C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data is not valid. Unable to list directory contents. Specify a valid destination path.
use [distribution]
if (not exists (select * from sysobjects where name = 'UIProperties' and type = 'U '))
create table UIProperties(id int)
if (exists (select * from ::fn_listextendedproperty('SnapshotFolder', 'user', 'dbo', 'table', 'UIProperties', null, null)))
EXEC sp_updateextendedproperty N'SnapshotFolder', N'\\TEST-PC\repldata', 'user', dbo, 'table', 'UIProperties'
else
EXEC sp_addextendedproperty N'SnapshotFolder', N'\\TEST-PC\repldata', 'user', dbo, 'table', 'UIProperties'
GO
exec sp_adddistpublisher @publisher = N'TEST-pc\s1',
@distribution_db = N'distribution',
@security_mode = 1,
@working_directory = N'\\TEST-PC\repldata',
@trusted = N'false',
@thirdparty_flag = 0,
@publisher_type = N'MSSQLSERVER'
GO -
Error while publishing the JCA Adapter.
Hi,
I created a DBAdapter through JDeveloper and created the .bz file from the .JCA file using OSB eclipse console. I have provided datasource and deployment configurations on the weblogic server. While publishing (run on server) the .bz file I am getting the follolwing error.
===============================================================
<Mar 17, 2011 8:06:12 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ConnectorApplicationOverviewPage&ConnectorApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DDbAdapter%2CType%3DAppDeployment%22%29.>
<Mar 17, 2011 8:06:12 PM IST> <Warning> <WebLogicDescriptorWL> <BEA-2156000> <"config-root" D:\Oracle\Middleware\Oracle_OSB1\soa\connectors\plan was not found>
<Mar 17, 2011 8:07:21 PM IST> <Error> <JCATransport> <BEA-381979> <An error occured while validating JCA transport endpoint, exception: javax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec
javax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec
at oracle.tip.adapter.sa.impl.fw.validation.WSDLDeploymentValidation.validateWsdlJcaBindingOperation(WSDLDeploymentValidation.java:338)
at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadataHelper.validateJCAOperationSpecProperties(JCABindingEndpointMetadataHelper.java:262)
at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadata.validateJCAInteractionSpecProperties(JCABindingEndpointMetadata.java:348)
at oracle.tip.adapter.sa.impl.JCABindingEndpointContextImpl.validateJCAInteractionSpecProperties(JCABindingEndpointContextImpl.java:151)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.validateJCAInteractionSpecProperties(JCABindingReferenceImpl.java:154)
Truncated. see log file for complete stacktrace
>
===========================================================================
The datasource >OutBound connection properties
dataSourceName java.lang.String
defaultNChar java.lang.Boolean false
platformClassName java.lang.String org.eclipse.persistence.platform.database.Oracle10Platform
sequencePreallocationSize java.lang.Integer 50
usesBatchWriting java.lang.Boolean true
usesNativeSequencing java.lang.Boolean true
usesSkipLocking java.lang.Boolean true
xADataSourceName java.lang.String jdbc/JDBCEmp
If I restart the server I am getting a different error
<Mar 17, 2011 8:00:53 PM IST> <Warning> <Coherence> <BEA-000000> <Oracle Coherence 3.5.3/465p2 (member=n/a): Local address "127.0.0.1" is a loopback address; this cluster node will not connect to nodes located on different machines> <Mar 17, 2011 8:01:00 PM IST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library> <Mar 17, 2011 8:01:01 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'DbAdapter' due to error weblogic.application.ModuleException: A <jndi-name> is specified for the resource adapter bean in weblogic-ra.xml, however no <resourceadapter-class> element is specified in ra.xml.weblogic.application.ModuleException: A <jndi-name> is specified for the resource adapter bean in weblogic-ra.xml, however no <resourceadapter-class> element is specified in ra.xml at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:229) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149) Truncated. see log file for complete stacktrace> <Mar 17, 2011 8:01:01 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'OracleAppsAdapter' due to error weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/db/DBManagedConnection.weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/db/DBManagedConnection at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:239) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149) Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.tip.adapter.db.DBManagedConnection at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280) at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177) Truncated. see log file for complete stacktrace> [ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
Oracle Service Bus Debugger listening on port 7453.
<Mar 17, 2011 8:01:14 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log00013. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> <Mar 17, 2011 8:01:14 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> <Mar 17, 2011 8:01:14 PM IST> <Warning> <Server> <BEA-002611> <Hostname "PC102536.cts.com", maps to multiple IP addresses: 10.226.187.76, fe80:0:0:0:197b:851d:ec88:5730%11> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.226.187.76:7001 for protocols iiop, t3, ldap, snmp, http.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:197b:851d:ec88:5730:7001 for protocols iiop, t3, ldap, snmp, http.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:ae2:bb4c:7001 for protocols iiop, t3, ldap, snmp, http.> <Mar 17, 2011 8:01:14 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode> <Mar 17, 2011 8:01:15 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> <Mar 17, 2011 8:01:15 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> <Mar 17, 2011 8:01:23 PM IST> <Error> <JCATransport> <BEA-381979> <An error occured while validating JCA transport endpoint, exception: javax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpecjavax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec at oracle.tip.adapter.sa.impl.fw.validation.WSDLDeploymentValidation.validateWsdlJcaBindingOperation(WSDLDeploymentValidation.java:338) at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadataHelper.validateJCAOperationSpecProperties(JCABindingEndpointMetadataHelper.java:262) at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadata.validateJCAInteractionSpecProperties(JCABindingEndpointMetadata.java:348) at oracle.tip.adapter.sa.impl.JCABindingEndpointContextImpl.validateJCAInteractionSpecProperties(JCABindingEndpointContextImpl.java:151) at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.validateJCAInteractionSpecProperties(JCABindingReferenceImpl.java:154) Truncated. see log file for complete stacktrace
=======================================
Please help me on this..
Thanks
PMHi all,
Thanks for your help I found my DBAdapter was not running on the server. I redeployed and the issue was resolved.
I tried testing the insert operation from the sbconsole I got the following error. Even from the OSB eclipse console I am facing same issue. I have pasted the error below. If any one can help me on this, will be a great help to me.
The invocation resulted in an error: <jca-transport-application-error xmlns="http://www.bea.com/wli/sb/transports/jca" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<jca-transport-error-message>Invoke JCA outbound service failed with application error</jca-transport-error-message>
<jca-runtime-fault-detail>
<eis-error-code xsi:nil="true"/>
<eis-error-message>Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.</eis-error-message>
<exception>com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/EmployeeDetails/Resources/JCA%20Adapter/Database/EmpDetails/EMP_DETAILS/employeeService [ employeeService_ptt::insert(CtsEmpCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invokeOneWay(JCATransportOutboundOperationBindingServiceImpl.java:114)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendOneWay(JCATransportEndpoint.java:191)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:168)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy125.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/EmployeeDetails/Resources/JCA%20Adapter/Database/EmpDetails/EMP_DETAILS/employeeService [ employeeService_ptt::insert(CtsEmpCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.post(JCABindingReferenceImpl.java:201)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invokeOneWay(JCATransportOutboundOperationBindingServiceImpl.java:109)
... 117 more
Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/EmployeeDetails/Resources/JCA%20Adapter/Database/EmpDetails/EMP_DETAILS/employeeService [ employeeService_ptt::insert(CtsEmpCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:667)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:357)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:316)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:295)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:354)
at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.post(JCABindingReferenceImpl.java:199)
... 118 more
Caused by: BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
at oracle.tip.adapter.db.exceptions.DBResourceException.createNonRetriableException(DBResourceException.java:653)
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:619)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:291)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:883)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:375)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:258)
at oracle.tip.adapter.db.DBInteraction.executeOutboundWrite(DBInteraction.java:721)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:241)
at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:534)
... 123 more
Caused by: javax.resource.spi.InvalidPropertyException: Duplicate Property Values Exception.
The properties [xADataSourceName] and [dataSourceName (both in connector properties)] can not both be [JDBCEmployee].
Sometimes it may not make sense for two or more related properties to have the same value.
Make sure the property is valid in the interaction (activation) spec by editing its definition in the wsdl. Refer to the Configuring the Database Adapter Guide.
at oracle.tip.adapter.db.exceptions.DBResourceException.duplicatePropertyValuesException(DBResourceException.java:324)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:1170)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:615)
... 128 more</exception>
</jca-runtime-fault-detail>
</jca-transport-application-error>.
Thanks once again
PM -
Error while publishing a requesterABCS to BSR
Following error is logged while publishing RequesterABCS/ProviderABCS to the BSR, How to get this working?
WARN DependencyCheck:? - org.systinet.uddi.client.v3.UDDIException: <dispositionReport xmlns="urn:uddi-org:api_v3">
<result errno="10500">
<errInfo errCode="E_fatalError">A serious technical error has occurred while processing the request.</errInfo>
</result>
</dispositionReport>
org.systinet.uddi.client.v3.UDDIException: <dispositionReport xmlns="urn:uddi-org:api_v3">
<result errno="10500">
<errInfo errCode="E_fatalError">A serious technical error has occurred while processing the request.</errInfo>
</result>
</dispositionReport>
at org.systinet.uddi.client.xsd2uddi.v3.Xsd2uddiStub.parseFaultBody(Xsd2uddiStub.java:90)
at org.systinet.uddi.client.UDDIClientProxy.parseFault(UDDIClientProxy.java:134)
at org.systinet.uddi.client.UDDIClientProxy.invoke(UDDIClientProxy.java:223)
at $Proxy59.publish_xsd(Unknown Source)
at oracle.apps.aia.bsr.publishxsd.PublishXSD.publishingXsd(Unknown Source)
at oracle.apps.aia.bsr.publishwsdl.DependencyCheck.xsdImported(Unknown Source)
at oracle.apps.aia.bsr.publishwsdl.PublishWSDL.pubSingleWSDL(Unknown Source)
at oracle.apps.aia.bsr.publishwsdl.PublishWSDL.publishingWSDL(Unknown Source)
at oracle.apps.aia.bsr.publish.BsrPublish.callPublisher(Unknown Source)
at oracle.apps.aia.bsr.publish.BsrPublish.invokeOperations(Unknown Source)
at oracle.apps.aia.bsr.publish.BsrPublish.main(Unknown Source)
17:14:57,221 WARN DependencyCheck:? - ***Could not find xsd tmodel, namespace:This is my steps to publish ES to SR:
1. Create RFC destination in SM59
2. Create ES Parameter in WSPARAM
3. Create logical port for SR in LPCONFIG
4. Release Web Service for SOA Runtime in WSCONFIG
5. Publish ES in WSPUBLISH.
When i was using SOAMANAGER to manually create the endpoint, the endpoint in the SR doesnt works though.
eg, Business Administration -> WS Administration -> Search for CRM_BPBASICDATABYIDQR -> Apply selection -> Configuration -> Create Service -> enter new service name and new binding name -> user id/password for HTTP Authentication -> save.
It works after i released it in WSCONFIG (ya, i know it's old way) and re-publish.
-julius -
Error while publishing thru Service registry
Hi friends
While publishing service thru service registry, I am getting this error message.
Any Solution?
Thanks
-Mitesh
com.sap.esi.uddi.sr.api.exceptions.SRExceptionerror code: null detail message: com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationException: Cannot load WSDL due to "Invalid Response Code: (401) Unauthorized. The requested URL was:"http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1"". Check that the specified WSDL URL "http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1" points to WS-I Basic Profile 1.1 compliant WSDL Definitions file->com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationException: Cannot load WSDL due to "Invalid Response Code: (401) Unauthorized. The requested URL was:"http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1"". Check that the specified WSDL URL "http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1" points to WS-I Basic Profile 1.1 compliant WSDL Definitions file->com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationMessage: Cannot load WSDL due to "Invalid Response Code: (401) Unauthorized. The requested URL was:"http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1"". Check that the specified WSDL URL "http://host:8000/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC1?sap-client=001&wsdl=1.1" points to WS-I Basic Profile 1.1 compliant WSDL Definitions fileHello Mitesh
Would this forum question be interesting for you?
[ESR post-installation tasks are missing|ESR post-installation tasks are missing]
regards
Rathish -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Error while Running Receiving Transaction Manager
Hi.,
We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
we have two Receiving Transaction Manager process.
Error
"APP 00204: Concurrent manager encountered an error while running the spawned
concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"Hello.
Have a look on MOS Doc ID 1071727.1
Octavio -
Error while executing the transaction QC22 (Quality Certificate for Batch)
Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra ChauhanHi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM
Maybe you are looking for
-
Creating 2D Array with info from file and Saving it to a text file
what im trying to do is take my nice little data structure and put it into a 2D array which i can copy and paste as code into my compiler... it takes TDPoints(like Point2D except has z value) which are in Faces(an arraylist of points, each face also
-
Certain songs will no longer open in iTunes
Two night ago I tried playing some songs that have been in iTunes, working fine, for over 2 years, and they simply refused to play. No progress bar of any kind would pop up, iTunes essentially ignored my clicks to play the songs. I tried deleting the
-
In PI 7.1 - Java UDF's Compiled Class files - Jar File location
Hi All, In PI 7.1 Does anybody know where the compiled Java UDF's (which are used in Graphical mapping) class files stored in jar are located in integration server? I want to use this jar file in my XSLT mapping.
-
[SOLVED]Gui for changing file associations
hello everyone! i use openbox as WM, thunar as my filebrowser and chromium as my webbrowser. i ran into the following issue: everytime i download something with chrome and click on the entry displayed on the bottom it mostly does not do anything. but
-
Why is this file so darn big?
I needed to pull some video off a dvd. I used Toast and the file was 3.8 gig. When I exported the video to a DV quicktime file to open it with iMovie, it grew to a whopping 20 gig. Why is that? Should I convert the dv to a quicktime movie? Or do some