Rfc return values that do not match input parameters

Hi, all.
We have File-RFC-File scenario in PI7.1
Here we have OM with request-response mappings, RFC, where we have request-response structures... Standart.
We have RFC channel and Receiver Agreement...
But when we start it.. We can send any request - RFC return the same response. And we found that this response is the same response, that we have when test Functional Module in SE37. When we change input parameters in SE37 we have another response - response when we run it from XI with another request!.
Why RFC doesn't react on input parameters?
Thanks!

Is your RFC receiver pointing to the correct system?
Yes, it's fine. RFC works and return request from tables that defined in output parameters of Functional Module. But values of these output parameters correspond not for request parameters of RFC, but for parameters that we set in SE37.
Maybe it is ABAP issue, i don't know.. Maybe problem in Functional Module.
Request:
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:ZO_FM_GTM xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<PA_BEGDA>20120201</PA_BEGDA>
<PA_ENDDA>20120129</PA_ENDDA>
<PA_VIEW>1</PA_VIEW>
<PA_WERKS>
<WERKS>0010</WERKS>
</PA_WERKS>
<RB_STATUS>1</RB_STATUS>
<REPORT_XLS>1</REPORT_XLS>
<RP_BEGDA>20120201</RP_BEGDA>
<RP_ENDDA>20120207</RP_ENDDA>
<ZOT_PM100049_REPORT />
</ns1:ZO_FM_GTM>
response:
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MT_Response_Report xmlns:ns1="http:/Reports_GTM_49">
<PM_HEADER>
<STARTDATE>2011-01-01</STARTDATE>
<ENDDATE>2011-01-15</ENDDATE>
<REPTYPE>2</REPTYPE>
<PA_JOBT1 />
<PA_NAME1 />
<STARTDATE>2011-01-01</STARTDATE>
<ENDDATE>2011-01-15</ENDDATE>
<REPTYPE>2</REPTYPE>
Edited by: ChizzT on Feb 7, 2012 11:11 AM
Edited by: ChizzT on Feb 7, 2012 11:16 AM

Similar Messages

Error Message - Value Entered Does Not Match Format of Field

I keep getting an error message in Adobe Pro X: "The value entered does not match the format of the field [JF13]".
I have JF13 programmed as follows:
On Calculate tab:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = " ";
It is programmed this way so if the user checks the check box before the field, only then will JF13 populate a value, which pulls from FL019. I also have the settings set to "number" because the data needs to display as a dollar amount $xxx.xx.
FL019 is a hidden field on the form which pulls a dollar amount from a Mainframe, and its settings are also set to "Number" :
I get four pop up windows with the above mentioned error message, and the only way to make the message stop is to remove the "number" format from the fields. However, when this is done, if any number which ends in a zero is entered, it cuts off the zero. This is not acceptable either.
Is there some sort of script I could add or some other way to prevent both the error message and the cutting off of the zero on JF13?
I am not very proficient with javascript, so any assistance would be appreciated!

Thank you so much for your response!!
Forgive me for my lack of knowledge - but where exactly would I add that in the script?
I tried it like this:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = ""(empty string);
And I got an error saying I was missing a parenthesis. Should it go somewhere else or am I completely off?

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

I don't know that you can purchase in one country and use it in another. Try contactoing Adobe support thru chat:
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

How to map a url that does not match with the context root ?

does weblogic support url that does not match the context root ?
ex. the context root is AAA. the welcome page can be
retrieved using http://localhost:7001/AAA
Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?

I agree with Imp68.
It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent. And, in the majority of cases, I've found that the websites work fine with any modern browser.
phardell,
To be clear, Safari is not the problem, the website is! The developer of this website is still living in the 1990s and needs to move forward with the times. Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish. Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working. If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
No matter what the result, you should look at the bottom of the page for a link to report problems with the website. Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
Good luck.

After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

Did you purchase the software in another country than where you live?

RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless. The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?

Dear Customer,
Thank you for reaching the Small Business Support Community.
The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides. If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

HT204406 Upload of songs that were not matched fails, iTunes crashes.

On restart, asks to logout then log back in to iTunes store. Problem does not clear up and repeats.

RaschkeKM wrote:
iTunes Match is not working correctly. When I go to play one song(example...Kelly Clarkson's Since U Been Gone does not play, but Miss Independent does. )
This is a known issue and at this time there is no fix. The workaround is to disable iTM on the iOS device and sync the mismatched songs via USB/Thunderbolt then re-enable iTM. This way you will be assured of having the "correct" version of the track on your device.
RaschkeKM wrote:
There are a number of other songs that I have had in ITunes that are not matched...they are completely missing from my inventory.
I'm afraid I don't understand what you mean. Do you mean you have music stored on your iPod Classic that is not also in your iTunes library? If that is the case, then of course those songs won't be matched or uploaded. A song must be in your iTunes library for it to be processed by the iTunes Match service.
Recover your iTunes library from your iPod or iOS device
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

"This card was purchased in a country that does not match your Adobe ID"

I bought a creative cloud plan from 500px, but when I try to redeem the license code I get the following message: "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help".
500px did not sell this to me as a product which could only be used in the USA.
This question has been posed previously - suggestions include changing the country associated with your adobe ID. However I have doubts as to the legality of this as why else would this restriction be in place if it were not for tax reasons.
Any suggestions would be most welcome.
muster_mark

https://forums.adobe.com/thread/1568798 about 500px problems

Calculate Results As Average of Detailed Values That Are Not Zero... with hiearchies doesn't work

Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
Abraham

It is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Clean-up all data that did not match with the selection.

Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...

Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen

Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID."

Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." anyone have any ideas?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

This card was purchased in a country that does not match your Adobe ID. You can try signing in with

This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help.

Hi Debbyw01,
Unfortunately we can't change the country associated with an Adobe ID but have the following options:
- you can create a new Adobe ID with the country using a different email address
- if you'd prefer to use your current email address please contact Adobe http://helpx.adobe.com/in/contact.html who can assist you to
make a change to your existing ID that will allow you to create a new ID with the original email address.
Please let us know what you'd prefer.
http://forums.adobe.com/thread/988634?tstart=0
Regards,
Rajshree

How to get a stored function return value (which is not a cursor)?

I want to do so with ADO inside Visual Basic. I know how to call a stored procedure, but nothing I tried could help me in calling a stored function and getting its return code. Note that the function has no cursors within its argument or return code.
Your quick response would be appreciated
Eyal

Eyal,
A stored function returns a value. You need to have the first parameter (of correct data type) for the returned value. The parameter binding is pretty much the same as you would do with stored procedures.
e.g. "begin :1= proc(....); end;"
Sinclair

Structure Index Member structure imput does not match Input Splitter output

I am running into a problem with Tiger's Quartx Composer where a structure output from an Input Splitter does not match the structure input to the Structure Index Member it is directly connected to. The input to the Structure Index Member displays an unchanging value structure when a changing value structure is passed to it. The same result occurs if the inputted structure in received via publish by passing the Input Splitter. Does anyone know what would cause this to happen?

Hi Frank,
Sorry, I have absolutely no idea what you're dealing with, but have you done any OS Maintenance lately, like clearing Caches?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Rfc return values that do not match input parameters

Similar Messages

Maybe you are looking for