RFC's for SAP Performance data

I am in the process of developing a Performance Monitoring System for SAP in Java.
The requirement is to fetch the performance metrics from SAP in a Java application. I know there are some RFC's available in CCMS module. But the customer is not interested in CCMS module.
Could anyone let me know whether there are any RFC's available in SAP for extracting performance data other than CCMS?
If anyone had come across this situation, please let me know.
Thanks,
Vijay

Hi,
there are severam methods for estimating av. response time after the upgrade, for the beginning you coud try to estimate
hardware (cpu, memory, disks) just to keep those resp. times on the same level. Use the followin notes:
089305, 0113795, 0178616, 517085 .... until you get note for your target release
then you have to add all deltas, and you will know the whole delta between releases.
For the first estmation of time change you can count it by using coeffition as deltas, example delta cpu = X
resp. time after upgrade = X * current resp. time
This formula gives you only impresion on resp. time, not precisse measure. Better calculation is simply
by calculating current system in saps, than using delta (for cpu) You can estimate required number of saps for target release, and X=req. SAPS for target/ current SAPS (btw. take for the estimation number of SAPS for current HW target release only, don't use the number of SAPS for 46C!), and again:
after upgrade = X * current resp. time
Please remember, thera are much better ways to estimate res. times, but it means detailed analysis of the system load, it can't be given as gold rule
Kind regards,
Mirek

Similar Messages

Creation of RFC destination for SAP-Access Connectivity

Hi,
       I want to create a RFC destination for SAP-Access connectivity.
Can I get some help regarding it's connection type,activation type and gateway options required for the same.
Regrads,
Anthony D'souza

Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME          Raj                      Logical name for connection
DBMS                   MSS                   Microsoft SQL Server
USER_NAME        <User name>       For SQL Server
PASSWORD         <password>         " "
CON_ENV             MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO                 Availability type for an open database connect
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Raj

Report/Widget for combined performance data

Hello.
I have created a dashboard view in SCOM 2012 R2 for power consumption of a number of servers. These servers are all part of a group. The power consists of a couple of different performance monitors (VMWare-sensor for VMs and Power Meter from the Power
Consumption MP)
The dashboard view works well, however I am after a total figure for each server in the group. Ideally this figure would be on the dashboard view as well.
E.g. if I have 3 servers with the below power draw
Server 1 – 150 Watts
Server 2 – 200 Watts
Server 3 – 300 Watts
I would like a box stating total power 650 Watts
If this is not available in a dashboard view, a report would be okay
Thanks

Hi,
As far as I know, there is no direct way, you may create a sql query and sum the value for each server.
You may refer to the helpful article below:
http://blogs.technet.com/b/drewfs/archive/2014/08/17/scom-performance-data-and-power-view.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

MACRO4 for SAP BI Data Archiving

Hi All,
Can any one please tell me that can we use sap bi data archiving by using tMACRO4??

To answer your question Macro4 is a content server certified to work with archivelink so will archive BI data using the standard functionality within SAP.
From Nick Parkin Proceed Archiving Solutions

Connect SAP BO Data Services to Azure Blob Storage

Hi,
I want to connect SAP BO Data service to Azure Blob Storage. Is there a way to achieve this?
Thanks,

Hi Anton,
As of now, it is not possible for SAP BO Data Services to connect with Azure Blob Storage. However, you may put down your requirement in Azure Feedback, so that concerned development team can get it done in near future.
http://feedback.azure.com/forums/34192--general-feedback
Regards,
Manu Rekhar

SAP Performance Testing - Manual or Automated?

Our organization is attempting to develop a regular performance testing effort. Everything wehave read points to using a tool, such as LoadRunner, to do performance testing. However, we're just starting and simply want to baseline several transactions, jobs, programs, etc (less than 30 items). We have tools to monitor the backend results and grab metrics, but no tools to automate the testing itself. Does anyone do their performance testing manually? What are some advantages to doing this?

Hi Yogi,
I think HP LoadRunner is one of the best tools for SAP performance testing. I did it for many years. It is now included with Solution Manager. Here is the link for for HP Mercury regarding performance testing.
https://h10078.www1.hp.com/cda/hpms/display/main/hpms_content.jsp?zn=bto&cp=1-11-126_4000_100__
Please check this site as well, it has lot of valuable information.
http://www.wilsonmar.com/1loadrun.htm
Regards, Nabi.

RFC scenario for inserting data in SAP, help me experts

hi...
i have to insert data in SAP database using BAPI_PR_CREATE.
which adapter i hv to use for RFC(sender/receiver)(syn/Asyn).
this sceanrio is File1-RFC-File2.
file1 sends the data to RFC to insert data and file2 should hv to send the autogeneration keyID for PR
Its very urgent...
please help me..
thx in advance
john

hi ...
i did that..
but..iam gting only 1 msg in monitering...
evrythn is fine,,,,my scenario shows in MONI black flag...but gting only one msg and the data which i sent to SAP is not storing in SAP..and when i search in SM58 in XI server...i cnt see any messages...
can u explain me Y..?
thx for response..
john

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

RFC & SAP Performance

Hi,
We have a situation where Web Portal makes an RFC call. We are thinking about limiting the number of users that can log onto the portal simultaneously.
What are the performance issues related to maximum number of simultaneous calls to this RFC? If say 100 log into the site simultaneously, 100 RFC calls would be generated. Will there be any performance related issues?
Thanks

Hello,
Generally if data is structured properly,it should not create problems.
What causes problem for such RFC calls is amount of time SAP takes to respond .If you have RFC which is not wirtten in good way (for optimised performance) then SAP takes lots of execution time to return data back to calling application & that sometimes is an issue for users who would not like to wait for 30-40 seconds just to get some data based on which they will go ahead & decide further actions.
Hope this helps.
Thanks.

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

SAP BO Data Services XI 3.2 - Cannot Handle Multithreaded RFC Connection?

Hi Guys,
Just want to ask for your inputs if Data Services cannot handle multiple RFC connection request to BW system?
The scenario is:
There is one BODI job using RFC connection and trigger the 2nd job at the same time and it happen that the 2nd job failed.
Current version of SAP BO Data Services XI 3.2 that we are using is 12.2.2.1
Thanks in advance,
Randell

Arpan,
One way to get to the multiprovider data is to use Open Hub with a DTP that gets the data from the multiprovider and exposes it as an open hub destination to Data Services. With Data Services XI 3.2 we now fully support Open Hub where Data Services will (1) start the process chain to load the data (2) read the data when process chain ended and (3) notify Open Hub when done so that the data can be purged again.
More info on Open Hub here : http://help.sap.com/saphelp_nw04/helpdata/en/1e/c4463c6796e61ce10000000a114084/content.htm
But I will also look into the why we show the multiproviders when browsing the metadata, but get an error when trying to extract using the ABAP method (not via Open Hub). You could be right in your assumptions below and we might just need to hide the multiproviders when browsing metadata.
Thanks,
Ben.
Edited by: Ben Hofmans on Jan 5, 2010 6:06 PM - added link to Open Hub documentation which references multiproviders as possible source.

No RFC destination is defined for SAP Global Trade Services

Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59 Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
Ramji

Hi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji

RFC's for SAP Performance data

Similar Messages

Maybe you are looking for