Rh Variable displays variable name, not value

In master page, header, I have inserted the chapter name. When I generate the output, it displays the variable name, PD Chapter Name, not the value of the variable. The code is unaltered from the button selection 'Insert Chapter Name' . Is there another step I'm missing? Thank you!
<?rh-variable_start name="pd-chap-name"
value="&lt;&lt;PD Chapter Name&gt;&gt;" ?><<PD Chapter Name>><?rh-variable_end ?>

Hi there
Can you share screen captures of the variables pod as well as a topic or something depicting this in the final result?
Thanks... Rick

Similar Messages

Creating a Folder Within Form or Document Library & Display the name not in the name column.

I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
the Form Library. I want to change that to another column like documents or suchlike.
Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
Thank You,
Chiranthaka

Hi,
If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
this column with the name of folder.
Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
I have seen a similar post from you in the link below:
http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
Best regards
Patrick Liang
TechNet Community Support

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

Variable name not coming in the alert message

Hi All,
Reference with blog /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
My problem is alert message not showing the variables value.Alert will generated properly but variable like "SXMS_ERROR_CAT, SXMS_ERROR_CODE" not showing in the alert messages.
My scenario is if sender or receiver adapter has wrong server name then the alert will triggered.
Regards,
Samarjit

Hi,
SXMS_ERROR_CAT and SXMS_ERROR_CODE are for Integration Engine alerts and will not be displayed for adapter Engine Alerts.
For the adapter eingine alerts , you need to use, 
SXMS_TO_ADAPTER_TYPE
SXMS_TO_ADAPTER_ERRTXT
Regards
Bhavesh

MDX Query - how to display member name not alias

Hello, I have a number of mdx queris that i am running through thecommand prompt. The query output is displaying the member aliasinstead of name does anyone know how i can change this. My query looks like this SELECT NON EMPTY {[AUM_CBAL]} ON AXIS(0), {[Product].levels(0).members} ON axis(1), {[Calendar].ME20050630} ON axis(2), FROM AUM.Aum Thanks!! Ranee 

Assuming that you mean essmsh: this is a setting you can change. the command to change is: alter session set dml_output alias off ; Not sure if you can change this in EAS HTH

How to retrieve attribute-names (not values)

Hi
I know that I can get all attributes by an XPath expression according to /AA/@* . But since I have a XML document in XMLType and when I use the "..extract( aXpath)" function, I get all the attributes of the corresponding node but as a concatenation of the values. How can I get the attributes names:
E.G.
AA
BB 12.3 /BB
CC 45.5 /CC
/AA
/AA/@* would return 12.345.5, but I need to know "BB" and "CC", any ideas ?

${applicationScope.abc}
or if there is no attribute "abc" in page, request, or session scopes just
${abc}

How to specify pairs of variabel names and values in OdiInvoke

Hi,
If you start the scenario from a web service, you are invoking the service OdiInvoke. When you look at the WSDL for this Web Service, you will notice that beyond the scenario name, version and the execution context, you can specify pairs of variable names and values. The WSDL for the web service as following:
<xsd:complexType name="SessionRequestType">
<xsd:sequence>
<xsd:element minOccurs="0" default="true" type="xsd:boolean" name="Synchronous"/>
<xsd:element minOccurs="1" type="xsd:long" name="SessionId"/>
<xsd:element minOccurs="0" default="true" type="xsd:boolean" name="KeepVariables"/>
<xsd:element minOccurs="0" type="VariableType" name="Variables" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="VariableType">
<xsd:all>
<xsd:element type="xsd:string" name="Name"/>
<xsd:element type="xsd:string" name="Value"/>
</xsd:all>
</xsd:complexType>..........
If i call this OdiInvoke web service from BPEL, From BPEL assign activity, how can i specify pairs of variable names and values? Example: i have variable 1 and value1, variable 2 and value2, how to assign them to pairs if variable names and values. so that after the assignment, the payload for assign activity in BPEL can be become as following:
<Variables>
<Name>variable1</Name>
<Value>value1</Value>
<Name>variable2</Name>
<Value>value2</Value>
</Variables>
Thanks!
Susan

Try this way,
In the expression builder copy the xml fragment to the target node. This will result in the below assign action in the bpel code
<assign name="Assign1">
<copy>
<from expression="<Variables><Name>variable1</Name><Value>value1</Value><Name>variable2</Name><Value>value2</Value></Variables>"/>
<to variable="outputVaribable"/>
</copy>
</assign>

Text Variable(Customer Exit) displays variable name instead of its value.

Hi Gurus,
My requirement is to display the year(from variable) as the field name i.e Year end salary 2009.
I was using the fields name as hardcoded values like 2009 but as per my requirement i need to display it from the variable.
I tried using Text Variable using customer exit, but I'm getting variable name(zvariable) instead of value(2009).
Please help me out, many thanks in advance.
Regards,
Ankur

Hi,
Actually I tried to create a Text Variable with Replacement Path.
But here the problem is that we have a Characteristic Variable (Customer Exit) which is not listing in the selection box of Replacement Path.
Hence we tried to create another Text Variable (Customer Exit) and refering to the same Customer Exit code.
Regards,
Ankur

In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

Value in input field of Hier.Node variable displays tech.name of the IO

Dear all,
we are facing an issue with Hierarchy node variable(auth.) in the selection screen of webReports.
After selecting a hierarchy node value,it is displayed along with + sign and tech.name of the Infobject in input field .
example: lets say we have Country Hierarchy and i have selected Country group 'NAM' node..This is displayed as "+NAM(ZCOUTRYGRP)". where ZCOUTRYGRP is tech.name of the InfoObject Country group.
Expected value is just "NAM" which is Key .Does anyone have solution for this? This Problem occuers when we select Level 01 value of hierarchy and we do have hierarchy node values from same INfoObject.
Regards,
Murali.
Edited by: Muralidhar c on Aug 1, 2009 1:24 PM
Edited by: Muralidhar c on Aug 3, 2009 10:40 AM

it works as designed.found in sap help.

Filter view with session variable does not display value properly.

Hi All,
I have a very unique issue and I am not sure if anyone ran into this before.
I have a prompt in my dashboard and a link to a report. The session variable default the value to the current value (term)
when I click the link to the report I get the following value, on the filter view of the report: Term Code Desc is equal to NQ_SESSION.CSA_Analysis_Term
however if I click the go button in the prompt I get the value: Term Code Desc is equal to 2030 (2011 Spring)
does anyone have a solution to this issue
thanks

Hello,
Have the same issue. Any solution. Gurus plz help.
thanks,
deep

Variable names display problem

I have three transparent text captions that are set to display from slide 1 through to slide 32 (using the option "display for rest of project").
The variables I am displaying are:
In the header:
$$cpInfoProjectName$$ - displays the name of the lesson module.
$$cpInfoCurrentSlideLabel$$ - displays the name of the current slide.
And in the footer:
Page $$cpInfoCurrentSlide$$ of $$rdinfoSlideCount$$ - displays the current slide number and the total number of slides in the lesson.
The problem is that the variable names display long enough to look somewhat unslightly. It might be for about 1/3 of a second but it is long enough to screen capture (attached just in case I am not clear enough in my description) this appearance before they resolve into their values.
This is rather annoying, since a student will see this occur for every slide.
Is there anything that can be done to fix this? Perhaps using a text caption is not the best way to display these variables?
Hmm... I wonder if creating a small persistant flash insert would be better?

I have seen that aswell Shawn. It seems like the variables are a bit slow to be populated with the correct value and then it will show the $$variable_name$$.
A Flash component would solve it and it won't take more than 5 minutes to make them all.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

User exit variable do not receive values in a view.

I have query with customer exit variable
variable entry is optional
Ready for input
can be change in query navigation
in the cmod I have case on i_vnam with the variable name.
When I run the query the i_vnam receive the name of the variable and act as expected.
When I run a view on this query the i_vnam do not receive nothing and because of this, the variable do not receive any value.
Do any one know why and how to fix this problem?
Thanks in advanced
Hagai

log into your sbcglobal mail using your browser and see if they are putting it in a spam folder before Thunderbird ever get a chance to see it.

Presentation Variable name being passed as value

I have a requirement where value needs to be checked against two separate fields for filtering (as OR statement). But there should be ability to filter on these fields separately as well.
Dashboard prompt:
Province [Multi search]
State [Multi search]
Combined search (Province OR State Fields) [Edit Box] --- used to pass presentation variable
Report filter:
Province is prompted
AND State is prompted
AND Province is @{presentation_variable} (no default)
OR State is @{presentation_variable} (no default)
But if the text field with presentation variable in not used to filter, then the report shows no result because the presentation variable name itself is taken as a value. Any solution how this can be done making sure that if province only is searched for then the presentation variable is not passed as value and the query returns no results?
Thanks everyone.

Thanks Rachit, that helps. For the scenario mentioned initially, even this works:
Province is @{presentation_variable} (no default)
OR State is @{presentation_variable} (no default)
But the challenge is if I want to add another filter (like country) also as a filter. When users filter only on country, then the report shows no results because no value has been passed to the presentation variable and the query generated uses presentation variable name as the value!

Additional Results Custom Step using Variables in Name and Value to Log expressions?

I am trying to create a Custom Step Type for logging additional results - requiring a single Name and Value data pair included in the step.
I want to pass the name and value data in using two specific variables.
This functionality can of course be explicitly coded on a test step without problem, but I can't find a way to create a custom test step which inserts such a step i.e. automatically inserting the correct variable names into Name and Value to Log fields.
Any ideas how to accomplish this? I don't want the custom step users to have to type in the variable names every time they use it.
I am using TestStand 4.1.1
Message Edited by CIM1 on 04-20-2009 07:26 AM

Hi CIM1,
There are a few ways of doing this.
The simplest one would be to configure the expression in the Pre-Expression or Post-Expression (depending on whether you would like the Step Type to use the value in the variables or write the value to the variables) and then from here you can lock away the expressions from being edited. The caveat with this method is that you are obviously restricing the Pre/Post-Expressions for the step type.
Another Method would be to code some code modules to Write to/Read from the Variables and then calling these in the Steps Pre-Step SubStep or Post-Step Substep. The advantages of this method would be that you can search for the Variable, and if the variable is not present, you could create it before writing to it.
Hope this Helps.
Best Regards,
Steve H

Rh Variable displays variable name, not value

Similar Messages

Maybe you are looking for