RH Word and WebHelp

I have not used RoboHelp in this century and now find myself
having to prepare a demo of stand-alone HTML Help. I'm using RH5.5
for Word, on NT using Word 2000. I originally created one book with
topics and sub-books with sub-topics. I was able to compile and
publish successfully. Then I added an additional four books with
nine topics. Four of the topics (and two books) were not included
when I compiled. Oddly, these four topics are the last four pages
of the file but there is nothing unusual that I can see. The .doc
file is 1,400KB. Is that too large? Also, the project files are on
the network, in case that matters. The project file I open is .hpj.
I have zero diagnostic abilities with HTML. My ancient
experience is with RH Word for Windows applications so have been
doing a lot of guessing. HELP! (Please)

Hi TheOtherSusan and welcome to our community!
First off, just a wee bit of advice.
Dump Word and dump it quick! I know it's tempting, but if
you are wanting to produce HTML based output, back away from Word.
You are asking for lots of frustration and heartache if you wish to
continue the Word path.
Don't sweat the HTML stuff too much. RoboHelp HTML shields
you from all of that, just like Word sheilds you from all the weird
underpinning code that makes things tick.
Additionally, keep things off the network!
Hopefully this helps some... Rick

Similar Messages

  • Styles looking different in RH8 for Word source and Webhelp

    Hi All,
    I am using RH8 for Word. There are close to 900 topics in my project. My problem is that the styles that I used in my RH Word documents and the styles displayed after generating Webhlep are looking different. Also, that is not consistent with all the topics; some are generated exactly as the styles are in RH Word documents, but some are generated differently. An example might help you clearly understand.
    Example
    I have used the following styles in my RH Word documents:
    ·                                 Normal for body text
    ·                                 Heading1 for headings
    [to see the below images clearly please zoom in the browser display]
    The following figure shows topic1 when the styles are applied in RH Word:
    This is another topic2 when the styles are applied in RH Word:
    Output for topic1 in webhelp:
    Output for topic2 in webhelp:
    As you can see, the styles applied in topic1 and its output matches, whereas it is different for topic2 in Word and in Webhelp. I am not using any templates in RH Word. Can anyone please explain why this inconsistency. Is there a way to resolve this. I will be glad to provide you more information if required.
    Thank you,
    Vinay

    Hi again
    Well, one might assume that you knew where the WebHelp output folder was because you are reporting the images aren't showing when you view WebHelp. So the question now becomes: How exactly are you viewing the WebHelp? Are you clicking the "View Result" button after you generate? Are you viewing after you publish it to the Web Server? (That doesn't sound right as you are saying the "keeper" won't push it until the image issue is resolved. This would seem to infer that you aren't involved other than to post and act as an intermediary?
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    Apple - Support - iTunes - Contact Us

  • In Pages document, how do I search for word and view its frequency and page numbers in a sidebar?

    I have a long document and I want to be able to search for certain key words and phrases, and then see how many times they appear in the document and exactly where.  How do I conduct this sort of search and viewing?  In the past, in Pages and Word, I've been able to view my "finds" in a sidebar but I can't figure out how to activate that service anymore.
    Thanks!

    Here is a word frequency concordance Automator Service that works in both versions of Pages. It does not present a page number reference. It is by descending count, and alphabetically, within the repetitive counts as shown in the image here. In any document, you select the text to process, then Menu > Application Name > Services > Frequency. The Service will open TextEdit with the n-pages of scrollable results. It is 16 pt Helvetica Neue for legibility.
    Here is the code:
    on run {input, parameters}
         try
              set mySelection to input as text
              set formatted_result to concordance(mySelection)
              if formatted_result is not null then
                   set textHeading to "Word Frequency List"
                   tell application "TextEdit"
                   activate
                         set NewDoc to make new document with properties {name:"Concordance"}
                         make new paragraph at beginning of text of NewDoc with data textHeading & return
                         make new paragraph at end of text of NewDoc with data formatted_result
                         tell text of NewDoc
                               set font to "Helvetica Neue"
                               set size to 16
                               set color of paragraph 1 to {0, 0, 65535}
                         end tell
                        end tell
              else
                        display dialog with title ¬
                         "No input selected" with icon stop ¬
                          giving up after 15
              end if
         on error errmsg number errnum
                    display alert ¬
                               "AppleScript Error" message errmsg & "[" & errnum & "]" as critical ¬
                                  giving up after 30
         end try
         return input
    end run
    on concordance(mySelection)
    -- Use Ruby to count word frequency and alphabetically sort words
        set rb to ¬
        "selected = String.new\nfreqs = Hash.new(0)\nselected = ARGV.join('  ').gsub(/[,.]/, \"\")\n
         words = selected.split(/[^\\w-]+/)\nwords.each { |word| freqs[word] += 1 }\n
         freqs_sorted = freqs.sort do |a,b|\n\t
         a.last == b.last ? a.first <=> b.first : b.last <=> a.last\nend\n
         freqs_sorted.each { |k,v| printf \"[ %8s ]          %s\", v, k }"
        do shell script "/usr/bin/ruby -e " & rb's quoted form & space & mySelection's quoted form
    end concordance
    Launch /Applications/Automator and choose New Document, then click the Service icon, and then select the Choose button.
    On the left, you will have a list of Libraries from which to choose workflow items. Find Library > Utilities. In the adjacent column, locate the Run Applescript workflow. Click on it, then drag and drop it in the large workflow window to your right.
    At the top, you can select Service receives text in any application. Leave Output replaces selected text unchecked.
    In your Run AppleScript workflow window, you will see AppleScript boilerplate. Click on it and press command+A, then backspace to delete this content. Copy and paste the above code into this Run AppleScript workflow window. Press the Run button in Automator's upper right corner. If (and it should) a TextEdit window pops up, you are good, and you want to press File > Save. A dialog box will pop-up where you can name your Service. I called my Frequency, you may wish to call it something else. Once you have save it, you can exit Automator. Services are deposited in yourlogin directory/Library/Services.
    If you have a Pages document open with text, either select it, or command+a to select the entire document. Now, you select your Service via Pages > Services > Frequency. This will now pop-up a new TextEdit document with the results. If you want to save this new document, you must use option+File to Save as...

  • Can't figure out how to stop my MBP from opening programs at startup, namely word and messages

    Recenty my MBPro has started opening MS Word and Messages at startup and I can't figure out how to stop it?  I've tried selecting and de-selcting the startup option from the dock but this doesn't help.  Does anyone have any suggestions?

    System Preferences has a setting for this.
    In the Users & Groups section you will fine a "Login Items" header.  This is a list of all the programs that will open automatically when you log in.  You can select any program and click the [--] button below that window to stop the program from opening automatically.

  • I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

    I have signed up for adobe conversion to microsoft word and I can not get it to work -  can you help me?

    Hi Mike,
    I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
    I apologize for the inconvenience.
    Best,
    Sara

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

    I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page,  but I can't work out how to do it - any suggestions would be greatly appreciated

    brendanfromsydney wrote:
    What are the different opinions on why pages should not achieve this?
    As far as I know, Apple is free to choose to offer this or that feature.
    They never said that they want to clone Word or even compete with it.
    Differences between tables in both worlds are numerous.
    In Pages (or Numbers)
    - we can't sort a single column
    - we can't sort by row
    - we can't insert or remove a single cell
    - a cell can't cross pages boundaries
    If I understand well these design choices match :
    ++-+-+-+-+-+-+-+-++
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    +-+-+-+-+-+-+-+-+-++
    Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • HI THERE UMM I AM TRYING TO USE MY MIRCO SOFT WORD AND THERE IS A QUESTION MARK ON IT AND WONT LET ME OPEN IT

    hi i am trying to get on to my mirco soft word and there is a question mark placed on it. when i try to open the app it wont.
    help

    Which version of OSX and which version of Word?

  • How do I make Word and Excel Documents readable to PC users that cannot open them

    How do I make Word and Excel Documents readable to PC users that cannot open them

    Be sure to save them in the Office 2007 format as .doc or .xls files.

  • Adobe photoshop,word, and excel  won't open on my 2010 air mac

    adobe photoshop,word, and excel  won't open on my 2010 air mac. Message says I have lost my power pc connection. this happened while in Mexico

    Adobe Photoshop CS2, MS Word 2004 and other PPC apps running in Snow Leopard Server installed into Parallels  for use in Lion or Mt. Lion:
                                  [click on image to enlarge]
    More information here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • My microsoft word and excel programs won't work and files won't open.

    After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open.  What caused this and what can I do to fix the problem without losing my files?  I have files that are part of my work and I HAVE to have them ASAP.  Please help.
    Thanks in advance.

    Hi
    Please find the steps to resolve your issue.
    Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
    Click the update that you want to remove, and then click Uninstall.  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Or Try this step
    If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
    Start in search box type System Restore then click on it then select the Date where unit was working fine.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Form9i open word and print direct to printer

    I upgraded developer forms 6i to 9i and found problem in case of print direct to printer.
    The report was not create from develop reports but it create from Microsoft Word.
    I generate this report via developer forms call function to generate microsoft word and print it directly not preview but I found the problem when I printed it directly to printer. It didn't have any response from printer although I set up printer at printer server machine already.
    I try to test other printers and do the same but the problem still occur.
    My platform for testing shown as follow :
    ORACLE DBMS 9i
    Develop Form 9i
    Microsoft Word 97, XP
    Windows 98, XP
    Thank you for your suggestion.
    Best Regards,
    Pongsak S.
    Thailand
    [email protected]

    Use DESTYPE=PRINTER.
    http://docs.oracle.com/cd/E14571_01/bi.1111/b32121/pbr_cla005.htm#i637246

  • Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files open w/o a problem.  Please help.

    Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files in words open w/o a problem.  Please help.
    Thank you.
    <Email Edited by Host>

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
    If that doesn't help, you may have better luck if you ask in the Pages forum:
    Pages
    When you repost, be sure to include full details about your versions so that people know what it is you're working with.
    Regards.

Maybe you are looking for