RHEL 5.3 WITH ORACLE 10.2.0.4

Dear Gurus,
i installed a new machine. i install oracle db and then apply patch 10.2.0.4. on oracle leverl sql everything work fine.
see i have restart the os/linux machine, after restart a few things noted.
- listener did not start automatically
- oracle db did not start automatically
- emctl did not start automatically
can you advise what should i do, what to check etc
advise please
regards

Please check this thread: Re: how to make the database, tns and console to start when OEL5 starts
kido

Similar Messages

  • Install Solution Manager in RedHat Enterprise 6 with Oracle 11

    Hello ,
    In the marketplace-PAM,  RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
    Does anyone have any information on this subject?
    Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
    tks

    Yes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
    Note 1565179 - SAP software and Oracle Linux
    Thanks

  • Regarding OBIEE Integration With Oracle EBS

    Hi All,
    I have installed BIAPPS (7.9.6.1) (components installed are 2 11g DBs (one is OLTP and other is OLAP) on RHEL 4, Oracle Application Server 10g, Informatica Power Center , DAC and OBIEE). After that i need to integrate the OBIEE with Oracle EBS. I have installed 11.5.10.2. I upgraded the database to 10g R2 and applied patch ATG 6 (Pre reqs of Integration).
    Steps Which i have done for integration:-
    I installed Financial module in Biapps. Made changes to that pre built rpd ie:OracleBIAnalyticsApps.rpd using Administrations tool. I have created datasource for EBS and given in connection pool. Similarly in dataware house connection pool also. When i test from Administration tool means Init Block > EBS Security context > Edit datasource. When i click on test the datasource i am getting error NQ_SESSION.ICX_SESSION_COOKIE* has no value definition.*
    I copied that rpd linux box where my OBIEE server resides and changed the rpd name in NQSConfig.INI. I added the oracle_home and tnsadmin etc in user.sh file. I added the dsn names which i created the same in windows in odbc.ini file. But NQServer.log says
    *[nQSError: 43059] Init block 'LAST_SYND_DS_YTD_QTD': Dynamic refresh of repository scope variables has failed.*
    *[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified*
    at OCI call OCIServerAttach.
    *[nQSError: 17014] Could not connect to Oracle database.*
    Please let me know any solution for this.
    Thanks,
    Manikandan

    hi Manikandan,
    Please check the tns entries for the connection pool that u assigned for LAST_SYND_DS_YTD_QTD
    thanks,
    saichand

  • HP EVA6000 with Oracle Databases

    Hi Everybody,
    Does anybody work with HP EVA6000 and Oracle Databases on RHEL?
    We have the following situation (everything is 64bits):
    1) Oracle 9i Database 9.2.0.7 on RHEL4 U2 using 4 local disks RAID 0 (15000rpm each). With the following results:
    - Acceptable database performance, it needs some sql tuning but performance is acceptable for users
    - Normal user response time
    - Normal active sessions for peak time.
    2) Oracle 9i Database 9.2.0.7 on RHEL4 U2 using HP EVA6000 with 16 disks (10000rpm each). I am not an HP EVA expert but what i know is that is configured with 4 Disk Groups for Oracle Database (VRAID1). With the following results:
    - We expected same or better performance, but it was not our case. We only migrated local storage to HP EVA storage.
    - Performance starts degrading in 30 minutes when users begin doing their work, we start killing some users, we start getting more active sessions and they stay active for a long time, more "buffer gets"....in general not acceptable performance for users and business.
    - We have exact # of CPU, exact RAM, exact OS configuration, exact SGA Oracle configuration...the only change is the new storage.
    What we need is an advice of HP EVA6000 users working with Oracle Database (specially 9i on RHEL).
    HP Support says it is a RHEL problem, Oracle Support says it could be an HP EVA configuration problem, nobody gives us a workaround or explanation just to confirm what it is happening.

    Hello Miguel,
    now we changed to a HP EVA6000. And we have the same problems like you described.
    Oracle 9i Database 9.2.0.7 on SLES9 (both 64bit) using a HP EVA6000.
    Now we have a lot of buffer gets and a bad overall performance.
    Could you solve the problem?

  • CAC or smart card use with Oracle database and web server

    I've been asked to smart card (CAC) enable our Oracle web server and database access. We currently use CAC to access many of our other applications.
    Where can I find the following information
    Oracle software required (and is it an additional cost)
    How to integrate Oracle App server (web server) with CAC.
    How would I need to change the database users accounts to be CAC enabled rather than database users accounts.
    Thanks
    steven jackson
    [email protected]
    614-692-9768

    Virtualisation is not certified for Oracle RAC on Windows.
    +Certified Software on Oracle VM [ID 464754.1]+ note states:
    Oracle Real Application Clusters (RAC)
        Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
            Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
            Paravirtualized (PV) mode only (Guest OS and drivers)
            Only supported on Oracle VM 2.1.2 and above
            Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
            Previous versions are not supported. Please refer to this link for best practices.
            Over-committing CPUs is not recommended, but supported with the following restrictions:
                The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
                two times (2x) the amount of real CPUs / cores in the Oracle VM server.
                The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
                cores in the Oracle VM server.
                Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
                CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
            Static support only (dynamic support is being planned):
                Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
                Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

  • Unable to boot bankapp servers with Oracle 8.1.7 in windows2000

    Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
    I booted the servers using tmboot, there are some errors.(1)I used the following
    RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
    D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
    is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
    BANKB1     GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
    follow is the error message when I booted the servers:
    .. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
    returned XAER_RMERR
    174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
    174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
    failed with /T tperrno (TPERMERR - resource manager error) ...
    Can anyone help? Thanks a lot!
    Best Regards
    Lily

    I found the answer myself in an earlier post.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
    Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
    Regards
    The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
    null

  • Registering a Partner application with Oracle SSO 10gR2

    Hi Everybody
    I'd like to ask a question around registering a partner application with Oracle SSO.
    I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
    When I save the details some information is automatically created e.g. Site Id, Site Token etc.
    The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
    For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
    My questions are:
    1. Where do these values come from?
    2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
    I would like to be able to verify these values.
    Many Thanks
    Andy

    I'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
    So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
    Jan Kettenis

  • Forms 6.0 how to query clob column with oracle 9.2 DB

    hi every body,
    i made install for oracle 9.2 oracle DB every thing goes ok but when i made query in my form version 6.0 which have CLOB column the form closed automatically without any message?
    and just for know when i run the same form with oracle 8.1.7 DB the form made query normally without any problem.
    i want your help please.
    Message was edited by:
    mshaqalaih

    I know there was a problem in 6i where you would get a crash if your query returned more than {Max Length} characters of the field representing the CLOB column.

  • Using Java Access bridge (Accessibility) with oracle forms 6.0 client

    I'm trying to use JAB (java Access bridge ) to capture events in oracle forms 6.0 client .
    I've a Jinitiator 1.1.8 and JRE version 1.4x
    I've configured JAB as per the installation guide . However the events don't surface in Java Monkey .
    Has anybody encountered similar issue ? what is the solution for the issue ??
    Also on one of the forums I read Jinitiator 1.3x and above is automatically recognised by Java Access bridge .
    For jinitiator version less than 1.3 manual configuration is required . however I haven;'t been able to find any on the oracle forms KB
    Also here is the excerpt from the link http://www.oracle.com/us/corporate/accessibility/faqs/index.html
    Q: Are there special steps for using Java-based applications with assistive technology?
    A: If the Oracle application is written in Java, such as JDeveloper or Oracle Forms (runtime), customers must first install the latest version of Sun's Java Access Bridge. The Java Access Bridge provides the integration with screen readers such as JAWS or SuperNova that support Java. You just download the Access Bridge and install it. Sun's AccessBridge 2.0x recognizes Oracle's JInitiator 1.3x and above so no manual configuration steps are necessary. The Access Bridge is available from: http://java.sun.com/products/accessbridge. At the time this document was written, Access Bridge 2.0.1 is the most current publicly available production release; Oracle recommends upgrading to this version. Sun's AccessBridge is bundled with Oracle Universal Installer (OUI) and can be found in the Java Runtime Engine (JRE). More information for configuring such products is in the respective product documentation, or on http://www.oracle.com/us/corporate/accessibility/products/index.html.
    Edited by: 974810 on 4 Dec, 2012 1:10 AM

    ODP.NET requires Oracle Client 9.2 or higher.
    You can find additional information about ODP.NET from the FAQ:
    http://www.oracle.com/technology/tech/windows/odpnet/faq.html
    and the ODP.NET homepage:
    http://www.oracle.com/technology/tech/windows/odpnet/index.html
    Hope that helps,
    Mark

  • Using long vs. clob datatype with Oracle 8.1.7 and interMedia

    I am trying to determine the best datatype to use for a column I
    wish to search using the interMedia contains() function. I am
    developing a 100% java application using Oracle 8.1.7 on Linux.
    I'd prefer to use the standard JDBC API's for PreparedStatement,
    and not have to use Oracle extensions if possible. I've
    discovered that there are limitations in the support for LOB's
    in Oracle's 100% java driver. The PreparedStatement methods
    like setAsciiStream() and setCharacterStream() are documented to
    have flaws that may result in the corruption of data. I have
    also noticed that socket exceptions sometimes occur when a large
    amount of data is transferred. If I use the long datatype for
    my table column, the setCharacterStream() method seems to
    transfer the data correctly. When I try to search this column
    using the interMedia contains() function, I get strange
    results. If I run my search on Oracle 8.1.6 for Windows, the
    results seem to be correct. If I run the same search on Oracle
    8.1.7 for Linux, the results are usually incorrect. The same
    searches seem to work correctly on both boxes when I change the
    column type from long to clob. Using the clob type may not be
    an option for me since the standard JDBC API's to transfer data
    into internal clob fields are broken, and I may need to stick
    with standard JDBC API's. My customer wishes to purchase a
    version of Oracle for Linux that will allow us to implement the
    search capability he requires. Any guidance would be greatly
    appreciated.

    I've finally solved it!
    I downloaded the following jre from blackdown:
    jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
    It's the only one that seems to work (and god, have I tried them all!)
    I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
    And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
    The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
    Don't oracle test their software?
    Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
    Thanks for everyone's help.

  • Installation Problem in SAPNW7.0 with Oracle on RHEL5.4

    Hi Everyone,
            I am installing SAP NETWEAVER7.0 SR3 with ORACLE 10.2.0.4 on RHEL5.4 Operating System. I have installed the java
    and i have install the ORACLE 10.2.0.4 Successfully. I set the environment variable in vi .bash_profile and i set the kernal parameters with their values in vi /etc/sysctl.conf file then run the command sysctl -p. Later i run the ./sapinst script the cd /NW7.0/
    BS_Installation Master_2005/ IM_LINUX_x86_64. It went fine up to the 24th phase. At the 24th phase "start instance" i got the error.
    The error message is
    " ERROR 2010-10-10 12:03:03.542
    CJS-20022  Could not start instance 'DVEBMGS00' of SAP system QAS"
    I did try my level best to resolve it. Can any one tell me what could be the issue and how to resolve it.
    Thanks

    startdb.log
    Sun Oct 10 16:45:11 IST 2010
    LOGFILE FOR STARTING ORACLE
    Trying to start QAS database ...
    Sun Oct 10 16:45:11 IST 2010
    checking required environment variables
    ORACLE_HOME  is >/oracle/QAS/102_64<
    ORACLE_SID   is >QAS<
    Sun Oct 10 16:45:11 IST 2010
    check initora
    Sun Oct 10 16:45:11 IST 2010
    check initora
    Sun Oct 10 16:45:11 IST 2010
    checking V2 connect
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-OCT-2010 16:45:11
    Copyright (c) 1997, 2005, Oracle.  All rights reserved.
    Used parameter files:
    /usr/sap/QAS/SYS/profile/oracle/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = quality) (PORT = 1527))) (CONNECT_DATA = (SID = QAS) (GLOBAL_NAME = QAS.WORLD)))
    OK (10 msec)
    tnsping: V2 connect to QAS
    Sun Oct 10 16:45:11 IST 2010
    Connect to the database to check the database state:
    R3trans: connect check finished with return code: 12
    Database not available
    Sun Oct 10 16:45:11 IST 2010
    Shutdown database
    First trying to shutdown the database - May be,
    the database is in the nomount or mount state
    Sun Oct 10 16:45:12 IST 2010
    starting database
    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Oct 10 16:45:12 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    ERROR:
    ORA-09925: Unable to create audit trail file
    Linux-x86_64 Error: 13: Permission denied

  • On Sun fire v490 - Solaris 10 with Oracle 8.1.7.4 & Sybase 12.0

    Hi,
    We are going to upgrade our server with this configuration -
    Sun Fire V490     2 x 1.05 GHz UltraSPARC IV CPU
    8096MB RAM     2 x73GB local disk
    2x FC 2GB Sun/QLogic HBAs
    DAT72
    On one machine we will have Sun Solaris v10 with
    Oracle DB v8.1.7.4 & Second one will be Sun Solaris v10 with Sybase DB v12.0.0.6.
    Now our question is - Sun fire have Hyper-thread CPUs ��� will the O/S and databases (Oracle and Sybase) view the proposed system as a true 4 CPU platform? Will parameters used to tune the database such as Sybase max online engines still operate in the same manner as before?
    Our old machine configuration was - Sun E450     4x400MHz CPU     1024MB RAM     2 x18; 8x36GB disks

    Questions on Oracle and Sybase should be directed to a database forum, this forum is for Sun hardware support.
    Here is a link to a DB forum I look at from time to time:
    http://www.dbforums.com/index.php
    The topic of tuning Oracle or Solaris is way beyond the scope of this forum, I have attempted to go into it before but didn't get any feedback and I would only like to spend lots of time on it if I was being paid!!! On the memory side, keep in mind that Oracle 9i 64-bit can address a maximum of 2 ^ 64 ( 16777216 TB ) memory, prior to that the DBA had to define memory parameters in init.ora. To be honest the last time I worked with a Oracle 8 database I shut a HP K class server down permanently that had been migrated to Oracle 9i on Solaris by an Oracle consultant and I can't remember all the tuning trick etc.

  • Installation problem under AIX 5.3 with Oracle 10g

    Hello,
    I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
    In ImportMonitor.Console.Log i have the following errors:
    Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
    Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
    Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
    Loading of 'SAPSSEXC_4' import package: ERROR
    Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
    Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
    Inside SAPSSEXC_4.log i have the following errors:
    /usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: T512CLU deleted/truncated #20071130102908
    myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
    myCluster (63.20.Imp): 656: return code received from nametab is 2
    myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    Under SAPPOOL i have:
    usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: ATAB deleted/truncated #20071130102908
    failed to read short nametab of table AT01                           (rc=2)
    (CNVPOOL) conversion failed for row 0 of table  VARKEY = ã ±ã ±ã °â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
    Do you have any idea how can i procceed with the errors?
    Thank you in advance
    Thanasis Porpodas

    Hi,
    look at sap note 921593 and search for myCluster ,
    read that section following is a part of that note.
    Symptom:
    During the import into a UNICODE system the following error occurs
    (for example in the SAPCLUST.log):
    myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
    myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
    myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
    myCluster (63.2.Imp): 1927: logic table is canonical.
    myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
    myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
    myCluster: CLU4       *00001*
    myCluster (63.2.Imp): 319: error during conversion of cluster item.
    myCluster (63.2.Imp): 322: affected physical table is CLU4.
    (CNV) ERROR: code page conversion failed              rc = 2
    |
    |                              RSCP - Error
    | Error from:            Codepage handling (RSCP)
    | code:  128  RSCPENOOBJ   No such object
    | Dummy module without real rscpmc[34]
    | module: rscpmm  no:    2 line:    75          T100: TS008
    | TSL01: CPV  p3: Dummy-IPC   p4: rscpmc4_init
    `----
    Cause:
    This problem is caused by incorrect data which should have been removed from the source system before the export.
    Solution:
    There are two possible workarounds:
          1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
                  search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
          2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
                  search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

  • Which version of Weblogic on Solaris is compatible with Oracle 8.1.7 - Unicode?

    Hi folks,
    We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
    planing upgrade Oracle to 8.1.7 version and migrate the character set of the
    database to UTF8 (Unicode),
    so we need to know which versions of WLS are compatible with Oracle 8.1.7
    and Unicode as Character Set.
    Thanks in advance.
    Moises Moreno.

    Hi Moises Moreno
    The latest version of weblogic server is 6.1 with service pack 1. This version
    supports oracle 8.1.7 on major unix platforms viz., solaris(2.6,2.7,2.8),
    hp-unix(11.0,11.0i), linux7.1, Aix4.3.3 and on windows platforms viz.,
    NTwithsp5, 2000.
    BEA jdrivers are having Multibyte character set support (UTF8).
    Note : Weblogic server 5.1 with SP10 also supports oracle 8.1.7.
    FMI : http://www.weblogic.com/platforms/index.html#jdbc
    Thanks & Regards
    BEA Customer Support
    Moises Moreno wrote:
    Hi folks,
    We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
    planing upgrade Oracle to 8.1.7 version and migrate the character set of the
    database to UTF8 (Unicode),
    so we need to know which versions of WLS are compatible with Oracle 8.1.7
    and Unicode as Character Set.
    Thanks in advance.
    Moises Moreno.

Maybe you are looking for