RLE_DELNOTE print Origina and Copies

Hi;
I need to print original and N copies (Nast-anzal value) from control program RLE_DELNOTE (ZRLE_DELNOTE), i can´t catch the variable that send to print the smartform N times.
I´m using VL03N tcode.
Any help.
Thanks on advance.

You need to explicitly declare this data to come back from the form GET_DATA:
PERFORM set_print_data_to_read USING    lf_formname
                                 CHANGING ls_print_data_to_read
                                 cf_retcode.
*---- retrieve additional data -----------*
ls_print_data_to_read-it_org = 'X'.
ls_print_data_to_read-it_gen = 'X'.
ls_print_data_to_read-hd_gen_descript = 'X'.
ls_print_data_to_read-hd_fin = 'X'.
ls_print_data_to_read-it_ref = 'X'.
ls_print_data_to_read-it_fin = 'X'.
Do this in between the calls to SET_PRINT_DATA_TO_READ and GET_DATA.

Similar Messages

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know.

Printing 4 pages(1 Original + 3 copies) from CO02 tcode

Hi all,
I am going to CO02 tcode and pressing the save button. It automatically prints the document. But my requirement is to print 4 copies when I save CO02. I have my Z print program and the Z sapscript also. But in Z program, I could nt find any NAST-ANZHL field where we give number of copies. How to go about it. Is there any configuration to be made for printing 4 copies or is it possible only through code. (Also I have to print 4 copies only for a particular Company code only)
Thanks in advance,
Balaji

<b>LS_ITCPO-TDCOPIES = 4.</b>
CALL FUNCTION 'OPEN_FORM'
     EXPORTING
            FORM               = G_FONAM
          application        = 'TX'
            ARCHIVE_INDEX      = TOA_DARA
            ARCHIVE_PARAMS     = ARC_PARAMS
            DEVICE             = lf_DEVICE
            DIALOG             = LF_XDIALOG
            LANGUAGE           = NAST-SPRAS
            OPTIONS            = LS_ITCPO
            MAIL_SENDER        = ls_sender
            MAIL_RECIPIENT     = ls_recipient

Photosmart C6180 prints too many copies of PDFs and HTML-documents

Hi,
My Photosmart C6180 prints multiple copies of documents even if I haven't asked for it. This seems to only apply to PDFs and HTML-documents, I haven't seen it happen with Word/Excel. It's not consistent, it happens most of the time but now always for these documents. When I look at the console, when it has started printing I see shortly the status "Printing - Restarting". That's probably when it starts the 2nd copy. Sometimes it stops by itself, other times it seems to be looping and I have to turn the printer off and delete the document from the queue.
HP solution center SW is updated, I run Vista with latest service packs on a Thinkpad T400s.
Any ideas?
Thanks!

My C6180 printed multiple copies of any document from my Vista OS laptop ( wireless connection ), but not from my
XP OS desktop ( USB connection), even though I selected 1 copy on the print menu. Unchecking "Enable bidirectional support" in the Properties / Ports dialog box solved the problem. Hope this helps someone too.

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this?

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this? I am a total MacBook nube and can use any help you may offer! Thank you so much.

How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart from Safari, I get this print dialog box:
(Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
A

Having difficulty scanning and copying on Office jet 6500A plus. Prints fine. Scans and copies are illegible and contain hundreds of vertical lines. I did all of the various cleaning tasks suggested.

Having difficulty scanning and copying on Officejet 6500A Plus. Prints fine. Scans and copies are illegible with hundreds of verticle lines on the page. I did all of the various cleaning and restart suggestions, but still doesn't work.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

What print and paper sizes are you using? Are you trying to print a borderless print? Does your printer support borderless for that particular size? Are you printing to the custom stock size or to a larger stock size?
OT

I have "ghost" events on my printed calendars repeating daily after the original event. How can I delete these as they only appear on the printed calendars and not on the on screen version?

I have "ghost" events on my printed calendars repeating daily after the original event. How can I delete these as they only appear on the printed calendars and not on the on screen version?

I had a similar situation. My credit card bill shows a charge on Sept 8 and Sept 9, both for $55.99. I called Apple but they said that I was the victim of identity theft so I cancelled my credit card. They have not refunded my money.

AR Invoice Original 3 Copies should be printed in one command

Hi Gurus,
Requirement is
When I click on print command, system should print ORIGINAL , DUPLICATE, TRIPLICATE SO on...at once
I have seen a thread already in SDN But i needed more information on the inputs....
If i need to develop an addon please provide some information on this.
2nd time when i print same invoice, Invoice should be printed as "Copy Only"
Your quick response is appreciated...
Vinaykolagani at gmailcom

you use in original print command
or
Print preview botton are u click
2. zfiv t.code use in voucher printout command.
rohit

Acrobat 9 Pro - Print Number of Copies

At times I want to print to paper 2, 3, or 4 copies of the same document. With the printer window opened, it allows me to select the quantity, but when I click OK to proceed to print I received another popup window reading:
The printer cannot support this many copies.
Number of copies will be set to printer maximum of 1.
What/Where/How do I find the setting to resolve this issue?
VAIO NOTEBOOK
MS WIN VISTA HOME PREMIUM SP2
MS OFFICE 2007 SP2
ADOBE ACROBAT 9 PRO (9.1.1)
BROTHER MFC 9800
Adobe Tech Support REFUSES to provide any support for my 1-month old AUTHENTIC, activated and registered product !!!

Bill... do not misunderstand my words as your views are not my intentions. Take into account, there is a difference between asking the OP, "Have you checked the Print Drivers", and or, "If so, what did you learn?"; rather than telling the OP what the issue is before all facts are gathered, then becoming defensive or insulted.
Example:
I am cooking. I taste the food and say, "Something doesn't taste right. You say, "You didn't add salt". I respond, "I did, it's not salt, it must be something else". Instead of asking first if I added salt, or offering another suggestion, you are insulted and or become defensive. Case in point.
I hope this cleared up your unjustified comment.
Back on subject:
I posted the screen-shot on the fly and first time using this forum and its UI. When it is clicked on, it expands (as you saw). After it expands. Change the "Zoom Level" on your screen to find the correct resolution. Hint - It tells no more than the words in my original post.
Thanks for your help. I'm going to sleep before the sun comes up. Have a happy Sunday.

NGenerate Original and Duplicated Invoice

Hy. I have one issue. My customer when print a invoice it want to print the original and duplicated. Someone have an ideia how i can do this. For Each Invoice Print it print's a copy of this invoice. My Ideia is create one variable y/n to gives option to the user if he want to print only original or original and duplicated invoice. if yes it print's twice if no it prints only original. Someone can help me o this issue?
Thanks
Edited by: user5877544 on Apr 28, 2009 4:39 AM

Take a look here:
http://winrichman.blogspot.com/2008/09/multiple-copies-in-bi-publisher.html

Print 2 different copies of sapscript

Hi
I want to print 2 copies of form in sapscript but with title for the first print "Oryginal" and for the second
"Copy". How to do it with one click "Print" and without 2 different forms. This tittle must be dynamical depends from which is printing document (1-st or 2-nd).
Parameter tdcopies isn't good for this

Try this.....
loop 2 times.
if sy-index =1.
heading = original
elseif sy-index =2
heading =copy
endif.
open_form
write_form
close_form
endloop.

Photosmart C4580 "stuck" printing about 20 copies of each when I only asked for 1!

Hi,
I am baffled and I need to fix this problem soon! I need my printer. All of a sudden, my printer started printing about 20 copies of each item when I only asked for one! This not only uses a lot of ink, but wastes a ton of time, for the little of time I have put up with it. Lately, I have just shut it off. Please - any suggestions?? I thought of uninstalling and reinstalling, but I can't find my disk! Thank you, Soly

Did you ever find a solution for this problem? I have no problem printing the business cards out on a Canon printer, or a different HP printer I used to have, but the D110 is nothing but a pain in the you know what ! I'm using publisher and the avery 8371 card stock, I searched solutions for days and did everything possible but still they're not printing correctly!! I'm dissapointed in this printer, every time I have a problem with something it always seems to be an HP product!!! Very frustrating because I never had to mess with any settings in the other printers I had, I would just put the file in, change the quality and click the print button with no problems. I'm ready to throw this printer out the window Anyway thanks in advance and I hope somebody can help me with this issue !!!

How to set up Print Specs and Profiles in CS5 Suite

I am no color management expert but I do want to get my printer to print the same colors as my monitor displays in PSD, AI and InD applications.
My Intel iMac and Cinema Display running OS10.5.8 are both color calibrated with Spyder 3 Elite to achieve correct color reproduction.
After days of searching and testing, this is my solution which I offer to help those new to CS5.
1. Start: PHOTOSHOP:
     Set colour settings (Edit>Color Settings) as follows:
          RGB - Adobe RGB 1998
          CMYK - US Web Coated (SWOP) v2 (This setting does not effect printer).
          Leave Grey and Spot as default 20%
     Color Management Policys:
          RGB, CMYK, Gray; all set to Preserve embedded Profiles
     Conversions Options:
          Engine - Adobe ACE
          Intent - Relative colourimetric ( my choice for AI artwork. Choose Perceptual for photos in PSD).
     Go to Save, give profile a name, and note the Conversion intent so you can create another profile for Perceptual and PSD.
     (I called mine Epson R2400 and noted the Relative Colorimetric intent).
     Finally, Go to Settings at the top of the Color Settings dialogue and select the color profile you have just named and saved. Click OK
2. Go to Bridge>Edit>Creative Suite Color Settings. Find your saved profile and select it and click Apply.
     Now AI and ID have the same colour preferences.
     Users without Bridge will have to set these items in Color Settings for each Adobe application.
3.   Photoshop>File>Print: Color Management
          Color Handling - Photoshop Manages Color
          Printer Profile - Choose the ICC Profile to suite your printer and paper stock. I used Epson canned ICC SPR2400 Premium Glossy with great results.
          Rendering Intent - Relative Colorimetric for artwork or Perceptual for photos.
4. At top of Print dialogue box, select Printer (Epson Stylus Photo 2400 in my case).
     Below, Click and open Print Settings;
     Layout - select Paper Size and number of pages (copies). Layout is one of several items in a drop down menu.
     Open the next drop down item, Color Matching. Check that he two options, Color Sync and Epson should be grayed out.
     Move to Print Settings.
          Media Type - depends on your paper. (mine is Photo Quality InkJet).
          Color - select Color or Black
          Color Settings - OFF, This turns off color management in Epson Driver leaving Photoshop in charge!
          Mode - I chose Advanced to get fine quality print. Automatic OK for general use.
      Click Save. Click Print and you should get a print matching your Monitor.
ILLUSTRATOR CS5
Bridge will ensure that Color Settings match Photoshop as 1. above. If you don’t have Bridge Go to Edit>Color Settings and specify the same as      Photoshop. Note Settings, at top of Color settings dialogue box requires the profile you created in Photoshop.
     Go to File >Print. There are 3 steps to check.
     In the window at left are headings General, Marks and Bleed, Output, Graphics, Color Management, Advanced and Summary.
     These are self explanatory. If you do not use Bridge, check Color Management as below:
1. Printer: your printer. Color Handling: Let Illustrator determine colors. Printer Profile: select your monitor RGB icc profile.
   Unlike Photoshop, do NOT use printer/paper ICC. Rendering intent: to suit your image.
2. Bottom left of Print dialogue box is Page Setup. Set your size etc.
3. Bottom Left is Printer. MOST IMPORTANT. Here are the similar setting options as PSD 4 above which require different handling.
     Select Layout, go down to Color Matching>select COLORSYNC not Epson. This ensures Apple ColorSync does color conversion.
     Profile - Automatic should appear with name of your preferred Printer/paper ICC below. ( be careful here as I have found AI sometimes finds the wrong      paper icc. Close Print and start again).
     Move down list to Print Settings - Basic:
          Page Set up - Standard; Media type - Your choice, (Photo Quality InkJet for me).
          Color - Color
          Color Settings OFF to ensure Epson printer driver does not try to manage color.
          Mode - Advanced if you want fine quality print. Automatic is OK for general use.
4. Click Print to close Printer dialogue box. Click Print to close the Print dialogue box and you should get a print to match your on screen image.
INDESIGN and General Comments.
Always select your Printer first as settings vary according to printer type.
InDesign Print set up is very similar to AI. Select Color Management at left and the Printer, Printer Profile and Rendering Intent require identical settings.
Go to bottom left, Page Setup. Specify Printer and paper size. Select Printer and the settings required are the same as AI.
If you switch between these apps there is considerable danger that the different Profile choices will trip you up. Photoshop color management requires the Printer/paper ICC, AI and InDesign require Monitor ICC. My primary error was to select my professionally scanned printer/paper ICC profile which resulted in weird colours on AI and ID. The clue that led me to choose my Monitor ICC profile instead was the ColorSync option in Color matching in AI. I hope you will find printing runs a lot smoother for you and I heartily invite better informed users than I, can add to, or qualify this post.
May the Force be with you!

Regarding print brightness at output. The Settings of monitor calibration determine white point and black point. At the time you run Spyder 3 or whatever your monitor calibrator is, the software sets a white point of your choosing. current iMacs are far too bright and prints resulting from unmodified Mac monitors will appear too dark because of the excessive screen brightness. My iMac at lowest reading is 139 candelas. To get prints which match the screen I specify 80 candelas. The Spyder software also reads ambient light in the room and makes a calculation which effects the white and black points registered for both viewing and printing. Since paper reflects a light level according to lighting conditions, we each view prints in different conditions according to illumination source. This effects also effects screen viewing so conditions determine what we see.
In simple terms, ambient light reading also modifies the software calculations for colour output. If it is too high, prints are pale, too low and prints are too dark. If the Monitor calibration has been done properly there should be no problem. The point here is to make certain your calibration process is accurate. Personally I have calibrated in a dark room at night-time and I have calibrated In a shaded room at midday. Hugely different conditions. Under both circumstances I have found the calibration has resulted in good prints. So I suspect it is user white point settings or calibration error which results in prints being too dark or too light. I understand the data used by the calibration software applies to the ambient light reading to the monitor for reading conditions and uses other color gamut data for the printing process. So printing error must surely originate with the user.
I welcome comment from more experienced people in this matter.
Cheers,

How can I/Is it possible to silently print a PDF with specific print settings and obtaining the resulting job id (in windows at least)?

Greetings,
I have a specific application for Windows I'm developing where I need to silently print a PDF to a real printer. The trick is I need to set specific printing preferences ... such as color/monochrome, # of copies, page size / source tray, etc. The printer is always set to spool documents, and it is key that I know the job id (even if its already done printing) of the resulting print job.
With windows APIs mixed in, I would imagine something like ...
OpenPrinter(printername)
StartDocPrinter(...)
-----> some SDK call to print the document based on the handles I pass it...or perhaps one page at a time after I call StartPagePrinter()
EndDocPrinter(...)
ClosePrinter()
I've been searching for something for days that would give me this sort of control, but I've been finding the documentation very difficult to find on silently printing a PDF through any means other than a command line which doesn't appear to give me the information or control I need.
Is this possible with the Adobe SDK?
I've seen other posts accomplish this by changing the printing defaults for the printer, and then sending the job silently with a commandline. This has two problems for me: 1) I still don't know the Job ID of the print job, and 2) I can't rely on the idea that other unrelated print jobs will not be sent while I'm processing the PDF ... making it difficult to use defaults as a means of controlling the settings without causing a lot of side effects.
Even just a point in the right direction would be a huge help for how I could accomplish this.
Thanks a lot,
Wayne

You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

RLE_DELNOTE print Origina and Copies

Similar Messages

Maybe you are looking for