RMAN ( PROBLEM while resync catalog)

We are facing this problem. when we are firing any command using RMAN/
Following are two samples.
Recovery Manager: Release 8.0.4.0.0 - Production
RMAN-06005: connected to target database: ORC1
RMAN-06008: connected to recovery catalog database
1)
RMAN> LIST BACKUPSET OF TABLESPACE SYSTEM2> ;
RMAN-03022: compiling command: list
RMAN-03026: error recovery releasing channel resources
RMAN-00569: ================error message stack follows================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: list
RMAN-03014: implicit resync of recovery catalog failed
RMAN-06038: recovery catalog package detected an error
RMAN-20035: invalid high recid
2)
RMAN> RUN {2> ALLOCATE CHANNEL C1 TYPE DISK;3> BACKUP DATABASE FORMAT 'E:\ORANTV8\TESTD
ATA\BACKUP\DB_s%s_p%p' ;4> RELEASE CHANNEL C1;5> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: c1
RMAN-08500: channel c1: sid=16 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: c1
RMAN-00569: ================error message stack follows================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-03014: implicit resync of recovery catalog failed
RMAN-06038: recovery catalog package detected an error
RMAN-20035: invalid high recid
RMAN> exit
Recovery Manager complete.
null

take a look at the RMAN troubleshooting section in the documentation on OTN @ http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76990/troubler.htm#447659.
This will step you through 2 different solutions to fix the problem.

Similar Messages

  • RMAN problem while backing up SunMC-3.6.1 online

    Hi Geeks,
    I am having trouble while online backing up SunMC(3.6.1) running on Solaris10 (11/06).
    The exact error message in log file is
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Started /opt/SUNWsymon/sbin/es-backup at Thu Jul 19 14:03:41 EST 2007.
    Running on SunOS f15k1-cons 5.10 Generic_125100-08 sun4u sparc SUNW,Sun-Blade-2500.
    Starting database...
    Successfully enabled service sunmcdatabase
    Connected.
    ARCHIVELOG
    Replacing old backup.
    SQL*Plus: Release 8.1.7.0.0 - Production on Thu Jul 19 14:03:52 2007
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    SQL> Connected.
    SQL> SQL> SQL> SQL> SQL> SQL> SQL> 2 3 906240 470800
    SQL> Disconnected from Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.4.0 - Production
    Database data size: 470800 KB
    Estimated backup size: KB
    Available disk space on /export/SUNWsymon/backup-Thu: 13726553 KB
    Found previous reference schema
    Performing on-line backup. Please wait...
    Recovery Manager: Release 8.1.7.4.0 - Production
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database: ORA-12154: TNS:could not resolve service name
    Failed to perform online backup.
    Sun Management Center data backup failed. Exiting ...
    Check /var/opt/SUNWsymon/install/backup_f15k1-cons.070719140341.8433 for details.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    And following is sqlnet.ora
    f15k1-cons:admin# more sqlnet.ora
    # SQLNET.ORA Network Configuration File: /opt/SUNWsymon/SunMCDB01/app/oracle/product/8.1.7/network/admin/sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DEFAULT_DOMAIN= abc.example.com.au
    #SQLNET.AUTHENTICATION_SERVICES= (TNS)
    NAMES.DIRECTORY_PATH= (TNSNAMES,HOSTNAME)
    Can someone please suggest where the problem is.?The online backup was working fine on Solaris9, the problem only occured when we upgrade this server (Blade2500 w/s) to Solaris10.
    Regards,
    Zia-ul-Hassan

    Hi Zia-ul-Hassan,
    You mentioned you performed an OS upgrade - did you follow the migration guide (http://www.sun.com/software/whitepapers/solaris9/sunmc_datamigration.pdf) when you changed over your Server?
    If not, SunMC does have paths under /opt/SUNWsymon with the OS version baked in (i.e. /opt/SUNWsymon/base/lib/sparc-sun-solaris2.9) and if you just copied your Server files to a new OS you likely broke many things :)
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Strange problem while syncronizing catalog

    I am doing a syncronization, once every two weeks or so. Since I started using Lightroom 3 (now 3.3) I end up with a very strange problem, that makes it almost impossible to sync the catalog.
    I get the window were it tells me to "add" pictures or movies without "moving" the images, then after I push the buttom it only takes a moment before I get up a dialog box were it tells me; " Community toolbar" with bold text and then "We're sorry, but the Safari browser version you are currently using does not support the community toolbar"
    If I do not push "OK", so that the dialog box dissapeare the syncronization will not move on. For every image I want to ad the same dialog box appears and I have to push "ok" again.
    Do not understand this at all. I have tried to update the Safari. I also been in contact with the phone support that could not help me.
    Anyone?
    // Torbjorn

    Hello
    I use Mac OSX 10.6.6
    Do not have any add-ons
    And Yes it is when I syncronize  the hole catalog. In the catalog I have several folders.
    //Torbjorn

  • RMAN backup fails atlast during resync catalog with ORA-00001

    Hi Everyone,
    Database version:10.2.0.2.0
    single instance database
    My Rman backups were running fine but today i got the error , almost at the end of backup
    Finished Control File and SPFILE Autobackup
    released channel: t1
    released channel: t2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03008: error while performing automatic resync of recovery catalog
    ORA-00001: unique constraint (RMAN.CKP_P) violated
    Recovery Manager complete.
    This problem occured 2 days before.I connected to catalog and ran a resync catalog and the backup worked fine for next day.
    Now again today iam experiencing the same problem.
    Any help would be great

    Thanks for the reply
    SQL> select * from rman.rcver;
    VERSION
    10.02.00.00
    10.02.00.02
    when i do the resync catalog manually it works fine.only during the end of backup it throws me the error;
    was wondering whether can i disable the primary key constraint on CKP table so that i can avoid the error.
    since its a live system im thinking lot before i do anything
    Thanks
    Edited by: centerB on 14-Apr-2011 06:40
    Edited by: centerB on 14-Apr-2011 06:57
    Edited by: centerB on 14-Apr-2011 07:03

  • Error while registering RMAN from primary to catalog database

    Hi all,
    Here we have a 10g dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps.
    The steps executed in catalog database(appsdb):
    SQL> create tablespace rmancatlog_tbs datafile '/u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend off extent management local segment space management auto;
    SQL> create user rman identified by oracle
    2 default tablespace rmancatlog_tbs
    3 quota unlimited on rmancatlog_tbs
    4 ;
    SQL> GRANT connect, resource, recovery_catalog_owner TO rman;
    RMAN> create catalog;
    recovery catalog created
    Added tns entries of catalog database in primary and standby. Then from primary database we tried to register to catalog database. It is showing that it is registering. But every query afterwards in rman is throwing the error. Below are the steps and error:
    [oracle@db1 ~]$ rman target sys/oracle catalog rman/oracle@appsdb
    Recovery Manager: Release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: NIOS (DBID=1589015669)
    connected to recovery catalog database
    RMAN> register database;
    database registered in recovery catalog
    RMAN> report schema;
    Report of database schema
    List of Permanent Datafiles
    ===========================
    File Size(MB) Tablespace RB segs Datafile Name
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of report command at 10/08/2012 06:16:06
    RMAN-00600: internal error, arguments [8201] [] [] [] []
    Can anyone help regarding this error?
    Thanks in advance.

    on resync catalog it is throwing no output or error.
    but it shows same error afterwards.
    RMAN> resync catalog;
    RMAN> report schema;
    Report of database schema
    List of Permanent Datafiles
    ===========================
    File Size(MB) Tablespace RB segs Datafile Name
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of report command at 10/09/2012 03:55:53
    RMAN-00600: internal error, arguments [8201] [] [] [] []

  • Rman problem with NLS_LANG mismatch b/w catalog and target DB

    Hi,
    I have target database NLS_LANG set to 'AMERICAN_AMERICA.JA16SJIS' and recovery catalog NLS_LANG set to 'JAPANESE_JAPAN.JA16EUC'. When backup is started the rman fails with the following error.
    <----
    RMAN-00571:
    ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
    ===============
    RMAN-00571:
    ===========================================================
    RMAN-03002: failure of allocate command at 11/26/2007 11:22:41
    RMAN-03014: implicit resync of recovery catalog failed
    RMAN-03009: failure of partial resync command on default channel
    at
    11/26/2007 11:22:41
    ORA-06502: PL/SQL: numeric or value error
    ------>
    It works fine if I change the recovery catalog NLS_LANG to 'AMERICAN_AMERICA.JA16SJIS'
    Any help could be appreciated.
    Thanks,
    Prince

    Hello Faust,
    have already tried that in SQLPlus, SQLWorksheet, MS Access (OffXP). All apps used on the same computer. OS Win XP Prof.
    Result in Plus and Worksheet
    40 ! â a a î l c ç i Ä . < ( + ! 50 ! & e e e i n k g Ü $ * ) ; ^ 60 ! - /  A A Î L C Ç I ö , % > ? 70 ! E E E I N K G ` : § ' = " 80 ! a b c d e f g h i [ ] g @ 90 ! ° j k l m n o p q r º ¿ A0 ! µ ß s t u v w x y z G ¿ B0 ! 0 1 2 3 4 5 6 7 8 9 a ß ¿ d e ¿ C0 ! ä A B C D E F G H I š &#65533; t õ D0 ! ü J K L M N O P Q R · u i s u E0 ! Ö S T U V W X Y Z ² Š &#65533; T Õ F0 ! 0 1 2 3 4 5 6 7 8 9 ³ U I S U
    result in Access (via ODBC Con)
    40 ! â &#261; &#257; î &#316; &#269; ç &#299; Ä . < ( + ! 50 ! & &#275; &#281; &#279; &#303; &#326; &#311; &#291; Ü $ * ) ; ^ 60 ! - /  &#260; &#256; Î &#315; &#268; Ç &#298; ö , % > ? 70 ! &#274; &#280; &#278; &#302; &#325; &#310; &#290; ` : § ' = " 80 ! a b c d e f g h i [ ] &#287; @ 90 ! ° j k l m n o p q r º &#8793; A0 ! µ ß s t u v w x y z &#286; &#916; B0 ! &#8320; &#8321; &#8322; &#8323; &#8324; &#8325; &#8326; &#8327; &#8328; &#8329; &#945; &#946; &#947; &#948; &#949; &#969; C0 ! ä A B C D E F G H I š ž &#355; õ D0 ! ü J K L M N O P Q R · &#371; &#305; &#351; &#363; E0 ! Ö S T U V W X Y Z ² Š Ž &#354; Õ F0 ! 0 1 2 3 4 5 6 7 8 9 ³ &#370; &#304; &#350; &#362;

  • RMAN - resync catalog

    Hi,
    I have a database "orcl" on which I do tests of backup and recovery. I have a database where is the catalog of the database orcl.
    I did backups with rman on orcl, I changed structure of orcl.
    At a moment I want to do a cold restore of the database from a cold backup. I did this.
    When I enter now in rman and after I do connect catalog ... and connect target
    I give the command "resync catalog" and the result is:
    "failure of resync command on default channel at 08/08/2007 15:34 checkpoint change# too low"
    What to do? There is another solution different than "drop catalog"?
    Thank you,
    Mihaela

    Mihaela,
    The previous posting is correct I think if all you want to do is get the catalog and database back together again, but some if it depends on what you plan on doing in the future as well.
    Let me see if I understand what you did:
    1. Backed up database.
    2. Made changes to database
    3. Restored database from a cold backup (I am assuming through RMAN)
    4. ?????? I don't know what you did here???????
    5. Now trying to resync database.
    Here are a couple of questions that might lend help in understanding your situation.
    What did you do at point #4 above? Did you do a point in time recovery? Did you open resetlogs? Did you take another backup of the database after the recovery?
    Now another question is why are you trying to resync the database and catalog? Is there something going on that you need to resync? What do you think resyncing will accomplish? What are you trying to accomplish?
    There are solutions different than "drop catalog" but I need to know where you are going with this, because it can get quit complicated.
    Regards
    Tim

  • Backup size is increased after resync catalog

    Hi everyone,
    I have describe my problem, if anyone have a solution please provide me.
    Rman catalog database version : 10.2.0.1.0, OS : red hat linux
    Target database version : 10.2.0.5.0, OS : solaris 10
    rman catalog database space is full, then i move my example tablespace to another location, but i forgot to change the ownership of new file.
    And I have no backup of my rman catalog database. so i offline the datafile first for opening the rman catalog database after opening the database I have offline the whole example tablespace and this tablespace cannot contain any thing related the catalog.
    after that I used the command : crosscheck archivelog all;
    DELETE EXPIRED ARCHIVELOG ALL
    then i run the command : CROSSCHECK BACKUP;
    DELETE EXPIRED BACKUP;
    then i run the command : report obsolete;
    delete obsolete;
    then i run the command : RESYNC CATALOG;
    then i run the command : change archivelog all validate;
    after doing all the thing when I am taking a backup of archive log by using following command :
    run {allocate channel c1 device type disk format '/appl2/prodback_rman/prod_fullbackup/ARCH_%d_%s.bak';
    backup archivelog all;
    before performing all the above thing my archive backup of whole day is around 5gb but after the above thing my archive backup of one day is around : 126gb
    and my level0 backup is alright after and before the above thing and the size is around : 139gb
    the script for the full backup is :
    run {allocate channel c1 device type disk format '/appl2/prodback_rman/prod_fullbackup/FULL_%d_%s_%c.bak';
    backup incremental level 0 database skip offline;
    after that I have perform the incremental level 1 backup by using the following script :
    run {allocate channel c1 device type disk format '/appl2/prodback_rman/prod_fullbackup/INC1_%d_%s_%c.bak';
    backup incremental level 1 database;
    before the above activity the size of incremental backup is around : 4.5gb but after performing the above activity the incremental backup size is around : 120gb
    it is very critical for me, if any one have the solution please provide me as early as possible.
    Thanks & Regards
    Rakesh Kumar

    Hi Hemant K Chitale,
    you said that I am using the COMPRESSED BACKUPSETs till 22-Jan, so I am posting
    the rman configuration here that is used before all this happening and same
    configuration is used right now.
    but before resync catalog the archivelog is generated only one location then I used to archive log
    dest for archive log generation then after 5 month I will resync my catalog. may be it is the
    reason.
    because there are no compressed backupset is defined in the rman configuration.
    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    CONFIGURE BACKUP OPTIMIZATION ON;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/appl2/prodback_rman/prod_fullbackup/ctrl_%F';
    CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/appl2/prodback_rman/prod_fullbackup/prod_%d_%s_%c.bak', '/appl2/prodback_rman/usb/prod_%d_%s_%c.bak';
    CONFIGURE MAXSETSIZE TO 20 G;
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/appl2/prodback_rman/prod_fullbackup/snapcf_PROD.f';
    Archive log generation log on the daily basis.
    SQL> select trunc(COMPLETION_TIME,'DD') Day, thread#,
    round(sum(BLOCKS*BLOCK_SIZE)/1048576) MB,
    count(*) Archives_Generated from v$archived_log
    group by trunc(COMPLETION_TIME,'DD'),thread# order by 1;
    DAY THREAD# MB ARCHIVES_GENERATED
    04-FEB-13 1 2776 37
    05-FEB-13 1 16767 220
    06-FEB-13 1 16545 216
    07-FEB-13 1 15772 208
    08-FEB-13 1 15056 198
    09-FEB-13 1 18486 244
    10-FEB-13 1 17591 232
    11-FEB-13 1 18163 238
    12-FEB-13 1 15062 198
    13-FEB-13 1 26383 342
    14-FEB-13 1 36279 462
    DAY THREAD# MB ARCHIVES_GENERATED
    15-FEB-13 1 34010 432
    16-FEB-13 1 32230 413
    17-FEB-13 1 31904 408
    18-FEB-13 1 33448 426
    19-FEB-13 1 34639 444
    20-FEB-13 1 36684 468
    21-FEB-13 1 27547 352
    right know the archive log backup size by rman is around 19gb per day.
    so tell me how we reduce the size of my archive log backup according to
    my rman configuration and how can i reduce the archive log generation on
    my production server on daily basis.
    Thanks & Regards
    Rakesh Kumar

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Problem with IMPORT CATALOG

    I have a question concerning the move of one recovery catalog from one server to another using the IMPORT CATALOG command.
    We have three Windows 2008 severs on which we are running Oracle 11.1.0.7.0. On server A we have nine Oracle instances that we backup with RMAN using a recovery catalog (rcat1) at server B. Now we have installed a new server, C to which we would like to move rcat1. We created a new instance, rcat2, on server C and did the following:
    rman catalog rman2/xxx@rman2
    RMAN> create catalog;
    RMAN> import catalog rman1/xxx@rman1;
    We get the following error message (sorry but some of the text is in Swedish):
    Starting import catalog at 2010-10-15
    connected to source recovery catalog database
    import validation complete
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of import catalog command at 10/15/2010 10:13:01
    RMAN-06004: ORACLE error from recovery catalog database: ORA-02085: databaslänken DBLINK_ENO3LA.RMAN är ansluten till RCAT1.WORLD
    It complains about some database links (can be different links, always concerning rcat1.world), but there are no database links in rcat1, rcat2 or any of the source databases on server A.
    All the databases are in the tnsnames.ora file on all servers, and we have tried to perform the command from all three servers, but we get the same error and are now running out on ideas… Has anyone had the same problem?
    Would it work to create a new database on server C with the same structure and name as the one on server B and just copy all the files from rcat1 on server B to the new rcat1 on server C? Or, is RMAN somehow aware of the servername/ip-address of the server of the recovery catalog?
    Thanks in advance!
    Helen

    Hi Helen,
    Your ORA-:
    ORA-02085: databaslänken DBLINK_ENO3LA.RMAN är ansluten till RCAT1.WORLDhas the following explanation.
    ORA-02085:
    database link string connects to string
    Cause:      a database link connected to a database with a different name. The connection is rejected.
    Action: create a database link with the same name as the database it connects to, or set global_names=false.
    but there are no database links in rcat1, rcat2 or any of the source databases on server A.Probaly the link is dynamicly created due to the < import catalog > command.
    Set global_names to false on rcat1 & rcat2 and retry.
    Regards,
    Tycho

  • RESYNC CATALOG

    I'm looking at the following reference and a bit confused about the Full Resynchronization process
    http://docs.oracle.com/cd/B28359_01/backup.111/b28273/rcmsynta038.htm
    From one hand it says :
    "you run RESYNC CATALOG When You made changes to the physical structure of the target database such as adding or dropping a tablespace. As with log archiving, *the recovery catalog is not updated automatically when the physical schema changes*"
    On the other hand, a few line later iit says :
    RMAN performs a full resynchronization after structural changes to database (adding or dropping database files, creating new incarnation, and so on)
    Thank you.

    Hello,
    "you run RESYNC CATALOG When You made changes to the physical structure of the target database such as adding or dropping a tablespace. As with log archiving, *the recovery catalog is not updated automatically when the physical schema changes*" it means that it's good practise to run RESYNC CATALOG manually after changes to physical structer of target database and if you know that you are not running any RMAN script after the changes - there isn't any background connection between target database and catalog if you are not running RMAN (connected to target + catalog)
    On the other hand, a few line later iit says :
    RMAN performs a full resynchronization after structural changes to database (adding or dropping database files, creating new incarnation, and so on) if you will be connected to target database and catalog using RMAN, RESYNC CATALOG will be run automatically after structural changes (if you will have new archived logs - 10 and more, resync will run too).
    Lukas

  • Problem while import

    hi experts,
    i am facing the problem while importing DC. here is the msg i am getting .
    Problems were encountered during import: 
    Failed to read the project description file (.project) for LocalDevelopmentpapermtcs.com.  The file has been changed on disk, and it now contains invalid information.  The project will not function properly until the description file is restored to a valid state.
    can anybody help me on this issue.
    thank you ,
    vijai

    hi Sumit ,
    how do i resync the dc.
    can u help me step by step.
    vijai

  • Problem in field catalog -help

    hi,
        i have problem while i try to pass my field catalog internal table to IT_FIELDCAT in REUSE_ALV_HIERSEQ_LIST_DISPLAY .
    FORM FIELD_CATALOG .
    CLEAR  WA_FIELDC.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
        I_PROGRAM_NAME               = WA_REPID
        I_INTERNAL_TABNAME           = 'IT_HEAD' "I_INTERNAL_TABNAME
        I_STRUCTURE_NAME             = 'VBAK' "I_STRUCTURE_NAME
        I_CLIENT_NEVER_DISPLAY       = 'X'
        I_INCLNAME                   = WA_REPID "I_INCLNAME
      I_BYPASSING_BUFFER           = I_BYPASSING_BUFFER
      I_BUFFER_ACTIVE              = I_BUFFER_ACTIVE
      CHANGING
        CT_FIELDCAT                  = IT_FIELDC
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
    DELETE IT_FIELDC WHERE  FIELDNAME <>  'AUTLF' AND
                            FIELDNAME <> 'KUNNR' AND
                      FIELDNAME <>   'VSBED'    AND
                      FIELDNAME <>   'LIFSK'    AND
                      FIELDNAME <>   'AUGRU' AND
                      FIELDNAME <>   'VBELN' AND
                      FIELDNAME <>   'BSTKD' AND
                      FIELDNAME <>   'ZTERM' AND
                      FIELDNAME <>   'PRSDT' AND
                      FIELDNAME <>   'INCO1' AND
                      FIELDNAME <>   'INCO2' .
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
        I_PROGRAM_NAME               = WA_REPID
        I_INTERNAL_TABNAME           = 'IT_ITEM' "I_INTERNAL_TABNAME
        I_STRUCTURE_NAME             = 'VBAP' "I_STRUCTURE_NAME
       I_CLIENT_NEVER_DISPLAY       = 'X'
       I_INCLNAME                   = WA_REPID "I_INCLNAME
      I_BYPASSING_BUFFER           = I_BYPASSING_BUFFER
      I_BUFFER_ACTIVE              = I_BUFFER_ACTIVE
      CHANGING
        CT_FIELDCAT                  = IT_FIELDC1
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
    DELETE IT_FIELDC1 WHERE FIELDNAME <>    'POSNR'   AND
                            FIELDNAME <>    'MATNR'   AND
                            FIELDNAME <>   ' WERKS'   AND
                            FIELDNAME <>    'LPRIO'   AND
                            FIELDNAME <>    'KWMENG'  AND
                            FIELDNAME <>    'ABGRU'   AND
                            FIELDNAME <>    'MAKTX'   AND
                            FIELDNAME <>    'VDATU'   AND
                            FIELDNAME <>    'PRSDT'   AND
                            FIELDNAME <>    'VBELN' .
    LOOP AT IT_FIELDC1 INTO WA_FIELDC.
    APPEND WA_FIELDC TO IT_FIELDC.   <----
    ENDLOOP.
    *want to pass IT_FIELDC to IT_FIELDCAT in  REUSE_ALV_HIERSEQ_LIST_DISPLAY ,but getting dump error finally.
    ganesh

    Hi siva,
       when u use APPEND both the workare structure and internal table structure should be same
    use this
    LOOP AT IT_FIELDC1 INTO WA_FIELDC.
    move-corresponding  WA_FIELDC TO IT_FIELDC.
    append it_fieldc.
    ENDLOOP.
    Message was edited by:
            chandrasekhar jagarlamudi

  • New in 3.4 - ReplicatedCache startup timeout triggered while resyncing

    Something changed from Coherence 3.3 -&gt; 3.4 in handling or setting-up the start-up timeout of the ReplicatedCache service. There was no problem in 3.3 but in 3.4 the service start-up times out while resyncing caches. I found out that the time it takes to time-out is equal to the cluster's packet publisher's resend time-out (which according to recommendations should be set to max(60 sec, 2 * greatest GC pause). In my situation I set it to 5 minutes (with greatest GC pauses of about 1 minute or so). But with large caches this is not nearly enough (it takes up to 30 minutes to resync caches in my situation).
    I worked arround the problem by creating a subclass of ReplicatedCache with an overriden getStartupTimeount() method and configuring it in the tangosol-coherence-override.xml in place of the default ReplicatedCache service.
    Maybe a "startup-timeout" configuration parameter should be adequate here.
    Peter

    Hi Peter,
    Yes, this is indeed a new "deterministic" behavior in 3.4. I will open a corresponding enhancement request.
    The important question though is: why does it take so long to replicate the caches in a first place. I just tested a replicated cache with 200,000 objects (not optimized Java serialization) totaling 100MB and it took about 20 seconds to start a new node (relatively slow development machines). There must be something else going on in your environment if it takes so long to start a replicated cache service. Do you see any "remote GC" messages? What is the Publisher success rate during the start? Did you run the datagram test?
    Regards,
    Gene
    Correction: I was wrong in the original suggestion that the service would not be stopped.
    Edited by: ggleyzer on Oct 15, 2008 2:33 PM

  • I have met problem while running script

    i have met problem while running script catalog.sql in oracle 10g r2 , while running it came out from the Database and then i can't get into the database please help ..
    ORA-01081: cannot start already-running ORACLE - shut it down first
    SQL> @C:\oracle\product\10.2.0\db_1\RDBMS\ADMIN\catproc.sql
    DOC>######################################################################
    DOC>######################################################################
    DOC> The following PL/SQL block will cause an ORA-20000 error and
    DOC> terminate the current SQLPLUS session if the user is not SYS.
    DOC> Disconnect and reconnect with AS SYSDBA.
    DOC>######################################################################
    DOC>######################################################################
    DOC>#
    DECLARE
    ERROR at line 1:
    ORA-01012: not logged on
    Disconnected

    You should post it to the Database forum.....
    Greetings...
    Sim

Maybe you are looking for

  • Print table

    i have table in rtf format i want to send it to crystal report to print it but it is appears empty please help (use crs for vs2010)

  • Problem in GR with Serial Number

    Hi experts, I have a material with serial number profile. Everytime I carry out a goods receipt from PO by using mvt type 101, the serial no. window pops out by itself. The problem is everytime I carry out a goods recepit blocked stock by using the m

  • Database design for DSS

    Hello All I have to design database for a DSS. It is basically a MIS project which will be used for reporting purposes Can anyone please tell me what are the considerations to be made while designing for such a system. Any documents or web links will

  • G560 Win7 recovery button takes into DOS window

    Hi, Anyyone with a hint on how to tackle my issue that when I want to do one key recovery: - windows files loading with progress bar comes up - background with green leaves shows so far it looks ok, but then on top of the background -  X:\windows\sys

  • Shared variables missing in distributed system manager

    I have multiple shared variables in a library (.lvlib).  These are all network-published shared variables.  I can see the library in Distributed System Manager but not the variables in the library.  When I look at the properties page in Share Variabl