Roles autorized for this users

Hi,
I could not logon from R3 to XI in SM59 though I have given the right parameters in technical settings and right user ID, password,client etc......
Is this anyway related to roles authorized for the users(SAPUSER for SAP R3 and XISUPER for XI) ?
How do I check the roles autorized for this users ?
Thanks
dhusanth

Hi,
>>user: XISUPER
I checked the Roles Tab
In Profile Compar.Status
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
The mentioned roles are not sufficient.... The following roles are needed
ROLES
SAP_ALM_ADMINISTRATOR
SAP_ALM_CUSTOMIZER
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
SAP_XI_ADMINISTRATOR
SAP_XI_ADMINISTRATOR_ABAP
SAP_XI_ADMINISTRATOR_J2EE
SAP_XI_BPE_ADMINISTRATOR_ABAP
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_CONFIGURATOR
SAP_XI_CONFIGURATOR_ABAP
SAP_XI_CONFIGURATOR_J2EE
SAP_XI_CONTENT_ORGANIZER
SAP_XI_CONTENT_ORGANIZER_ABAP
SAP_XI_CONTENT_ORGANIZER_J2EE
SAP_XI_DEMOAPP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
Regards
Agasthuri Doss

Similar Messages

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Customizing Message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer spezific text or to redirekt to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check these threads.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Cusomize message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer specific text or to redirect to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check this thread.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

EXP-00105: parameter CONSISTENT is not supported for this user

Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?

As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed.

Thousands of "mail is not enabled for this user"

Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
Can someone help me? Below is a minute section of my System log:
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
------------------

Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
Hope this helps!

Unable to retrieve settings for this user

Just setting up my new mac mini server for first time. It is updated to Mountain Lion. Setup local network user account with account name same as local short names on other macs (same on all of my mcahines). Then used System Prefs> Mail, Contacts, and Calendars.... to add a server account. Used exact same account info as on server (had both open to view).
Get the message: "unable to retrieve settings for this user"
Turned of firewalls... still not change.
Did search for this problem.... no real helpful responses.
Thought I was following all the basic steps to add a local network user. What am I missing?
Thanks

This message gets thrown if no services are enabled that the wizard wants. Enable calendar, contacts, email, etc and it will connect. This threw me off until I turned on the contact server for the heck of it and it started working.

Default account setting for this user is incomplete

Hi,
I have created a user and gave rights(connect and resource) to that user. i have logged in and when i trying to open form module im getting a message.
default account setting for this user is incomplete. Contact system administrator
How to resolve this?
skud.

default account setting for this user is incomplete. Contact system administratorThis is an application error not an Oracle Forms error. Contact your system administrator to determine what is missing from the user account you created.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Folders under a role displayed for all users

Hi
I had created a role called Role A and this had two folders unders that named Folder A, Folder B. I assigned this role to User A only.
I logged into the portal as User A, and saw that these two folders were visible, and as I had wanted it.
But when I logged in with the administrator's account too, I noticed that along with Content Administration, User Administration, System Administration, I also had Folder A and Folder B.
I checked the roles for Administrator and Role A has not been assigned.
I dont want this Folder A and Folder B to appear in the admin's account.
Please help.
Thanks
Manoj

Hi
Thanks for your help. Its not a permission issue for that folder, and no other groups are added in Role A.
I guess, like Venkatesh says, it could be the content admin role or super admin role. But surprises me as to what would happen if there were more than 100 folders.
There must be something else to it. I suspect this to be a cache problem, as I had added Role A to Administrator's group and then removed it from there. I will check this and confirm.
Thanks for all help
Regards,
Manoj

Changing the sequence of roles/groups for Portal users after Login

Hi
We are at EP 7.0 SP11.
We have developed custom role for ESS, MSS, EIC and Reports etc.
Now when all the 3 roles are assigned to any user, the sequence of the display is generally
Employee Self Service, Manager Self Service and then EIC.
We need to change this sequence in Dev QA and production environment for some users preferably (or for all portal users), so that the 1st page which loads in portal after user logs in , is not necessary ESS.
The requirement can also be considered as, we need to change the default page which displays after user logs in.
Does someone have any idea how can we achieve this ?
Looking forward for your response.
Thanks
Neha

Hi Neha,
Add custom Welcome page/Home page(eu_role) and Sort Priority property as per Koti Reddy.
Hope it helps
Regards
Arun

Where is the "Prevent Active Directory synchronization for this user" stored in the Project 2010 DB tables?

I would like to create a report from the DB that gives me all users in Project/PWA 2010 where the "Prevent AD sync..." box has been checked in the user/resource configuration, but I cannot find where this is in the Project databases. Our
DB is SQL 2008 R2.
Thanks,
Marty Hadden
MS Project Administrator

Hi Marty,
I might be wrong but the Prevent AD Sync details are not available in the Reporting db. Maybe you can check the published/draft databases (not supported) or you can configure a separate custom field and you can duplicate the information for each user
into this field. The custom field can be used in the reports based on the reporting database.
Hope this helps
Paul

Added additional user. How do I configure password for this user?

Have two different accounts. Second accound added but don't understand how to cinfigure password for this account.

A bit confused by your query, so can you clarify a few points.
re: added additional user
You do not add additional users to Thunderbird, so I presume you mean you have tried to create another mail account for someone else in your own profile.
You do not configure passwords for other peoples email addresses as that would be a privacy issue and only they should do it.
Lets start at the begining.
If more than one person is using a computer, they should have their own User Account which they access via a password they choose. This gives them their own desktop view and access to programs installed on computer, such as Thunderbird.
Thunderbird will be available for them to use.
When you run it for the first time in their User Account, it will create a Profile in their User Account.
Thunderbird will also then ask you to create a mail account in that Profile.
The details you enter will ask for Name. email address and a password.
That password is the same password they use to access their email in their webmail account using a browser, so only they should know that password and they should not divulge it to anyone - however in some cases, eg: spouses, they may know each others password.
You can choose whether Thunderbird remembers the password or not before creating the account, but the password would still be required to configure the mail account.
This method means that no one can see that persons emails nor access their password details because they do not know the password to the computer User Account.
If you have only the one admin User Account which several people use, then anyone has access to anything on that computer. This may be fine if eg; spouses share the computer, but it is not a practise that should be used in any other environment.
If you have mail accounts created in the same Thunderbird profile, then all mail and passwords are freely available for anyone to see and this may not be desired.
Some people use only the one User Account, but they have their own Profile created in Thunderbird.
When Thunderbird was initially run, it created a defult Profile, but you can add additional Profiles using the Profile Manager.
The mail account is created in that Profile and then they can apply a Master Password in Thunderbird.
This means that anyone can still see anyone's emails as on startup as anyone can select any Profile.
But, the access to passwords is locked and removal of Master Password will remove all stored paswords to safe guard privacy.
Some info on Master Passwords:
* http://kb.mozillazine.org/Master_password
Some info on creating additional Profiles using Profile Manager:
* http://kb.mozillazine.org/Profile_Manager

Roles autorized for this users

Similar Messages

Maybe you are looking for