ROLLOVER for a large image to appear
I am redoing my previous website. In that site, I had movie
clip within a movie clip. This new site will not work using that
procedure.
The new website situation:
My website is setup with small images, two in a row and two
columns of four small images 60pixels x 68pixels. Those are on the
right side and also on the left side (with different set of small
images). In the center, which is now blank, will be for the large
image to appear.
This is want I am aiming for: Upon MOUSE ROLLOVER on a small
image, the large image is to appear in the center, not on top of
the small image.
The Large image is to come about whenever the mouse is rolled
upon a small image.
I am still learning Flash. Hope someone can assist me with
the above mentioned situation.
[email protected]
Good point Dzedward,
I think however that since she has only a few images, she
could just turn her small images into buttons, create rollover
states, and import the larger photo images into the middle space
where she would like them.
Should you like to try this Alice, it is extremely easy.
turn each of your small images into buttons, double click on
the new button, noticing now that there are four squares by the
timeline titled "up" "over" "down", and "hit"
Click once on the "over" box, then go to
File....Import.....Import to Stage... scroll through your directory
until you find the large image you desire. Import it.
Now you can place it wherever you like, once that is
finished, go up into the control panel between comand and window,
then scroll down to "test movie"
I hope this helps, and works for you.
Should you have alot of images, this method would definately
make your file size large, and hence upload much slower.
Copel
Similar Messages
-
I need a tag for the URL to the large image in order to use the Facebook Feed dialog (share).
See example at https://aesgatorshack.worldsecuresystems.com/gator-shack/ladies/ladies-aes-pep-rally-repli ca-jersey.
When you click the "Share on Facebook" link, it doesn't use a photo. I can specify a photo to use; however, I need the URL to the image.
Here's the Facebook code as is:
<a href="#" class="social_button social_blue" onclick="window.open('https://www.facebook.com/dialog/feed?link={tag_itemurl_withhost}&app_id=271818569626492&redirect_uri={tag_itemurl_withhost}& amp;name={tag_name}&display=popup','Sharing My AES Gator Shack Finds','width=640,height=320');">Share on Facebook</a>
I can add the picture= parameter, but I need the URL to the image.There is no way to get the value of the large image tag like you can for image fields in webapps. In webapps, if you created a field called "image" then you can output the whole image markup with {tag_image} or just the URL to the image with {tag_image_value}.
This isn't possible with the large product image. I recently had to implement a Pin It Button on an eCommerce site on BC and had to use javascript to update the link that triggers the Pin It button with the URL of the image. Here's what I suggest. Instead of doing the whole code in the "onclick" attribute, you should use some jQuery and some data-* attributes and set the whole link up with that instead of inline javascript on the anchor element.
Here's a fiddle that should work for you. It requires jQuery to be loaded before you include this script on your page and requires you to update your markup to the markup shown in my example. Should be an easy cut and paste:
http://jsfiddle.net/thetrickster/KQmdd/ -
Creating a custom DataBuffer for very LARGE images
I would like to work with very large images (up to 100MB) in an application.
Only for image manipulating, not rendering for screen.
My idea is to write my own DataBuffer which use Hard Drive,maybe with some "intelligent" swapping.
But At first performance doesn�t matter.
I try this:ColorModel cm = ColorModel.getRGBdefault();
SampleModel sm = cm.createCompatibleSampleModel(w,h);
DataBuffer db = new myDataBufferInt(size);
WritableRaster raster = Raster.createWritableRaster(sm,db,null);But somebody don�t like myDataBuffer
and of course it is type DataBuffer.TYPE_INTthrows:java.awt.image.RasterFormatException: IntegerComponentRasters must haveinteger DataBuffers
at sun.awt.image.IntegerComponentRaster.<init>(IntegerComponentRaster.java:155)
at sun.awt.image.IntegerInterleavedRaster.<init>(IntegerInterleavedRaster.java:111)
at sun.awt.image.IntegerInterleavedRaster.<init>(IntegerInterleavedRaster.java:78)
at java.awt.image.Raster.createWritableRaster(Raster.java:980)
public class myDataBufferInt extends DataBuffer {
public myDataBufferInt(int size) {
super(TYPE_INT,size);
. . . }The question is how to manage large image?
What kind of subclasses I have to write?
Thank you all
P.S: I don�t want to use: java -Xmsn -Xmxni have the same problem let me know please if you have an answer?
-
Vision Builder for Automated Inspection: Image randomly appears upside down
Hi everyone,
I seem to be having a rather unusual problem here. I'm using an IDS UI-6280 camera to simply take a picture and log it to a file every minute. However, about 50% of the times when I start VBAI, the image appears upside down. The only solution I have found so far is to close VBAI and start it again. It usually takes a couple of tries before the image turn back up again, and then it's okay for the next couple of times I open VBAI. I have found no clues at all as to what could be causing this. Has anyone experienced something like this before?
Clarification:
- Once VBAI is running, the image does not flip randomly. If the first image is upside down, so are all the subsequent images. If the first image is upright, so are all the subsequent images. The flipping only seems to happen when I open VBAI.
- The flipping only seems to happen when I use VBAI. Using the IDS software always gives an upright image.
- There is about a 50-50 distribution between upside down and upright images. However, there seems to be some pattern in when the flipping occurs. I just opened and closed VBAI 10 times, the upside down and upright state occured in an order like this (x=upside down, 0=upright): x0xxx00000
Any help or insights would be greatly appreciated!1. Does the camera have an attribute for flipping it? If it does, the camera may not handle this attribute well when VBAI sets this attribute in conjunction with the other attributes as fast as VBAI can when it is initializing the camera. Most cameras respond when they are done and ready for the next attribute to be set, but some cameras respond before the attribute is done being set and can get in a messed up state if another attribute is set too quickly. You could try using the Read/Write Attribute Step in VBAI to manually set the flip attribute off before you acquire (make sure to set the flag to always set this attribute even if the current value is the same as what it will set to).
2. If you acquire an image in MAX, is it upside down? Try Clicking on the camera in MAX, acquire, click to another camera or to another device (this will release the resources for the camera), click back on camera again in MAX and acquire again. Repeat this several times and see if you have the same flipping behavior as in VBAI.
3. If you create a new inspection with just an acquisition step, does it still happen? Make sure not to change any of the default attributes for this test case. This will ensure the VBAI step uses the same settings you would see in MAX.
4. What if you try using Snap Shot mode in the acquisition step instead of Immediate mode.
Hope this helps,
Brad -
Code for uploading larger image or any file object
I have this code which is working file for files <500 KB
* To change this template, choose Tools | Templates
* and open the template in the editor.
package controller;
import java.io.IOException;
import java.io.InputStream;
import java.io.PrintWriter;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.util.Properties;
import javax.servlet.RequestDispatcher;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import javax.servlet.http.Part;
* @author Chinmay
public class ProfileImage_Update extends HttpServlet {
* Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
* @throws ServletException if a servlet-specific error occurs
* @throws IOException if an I/O error occurs
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
Part p = request.getPart("file");
InputStream in = (InputStream) p.getInputStream();
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
Connection connection = null;
PreparedStatement stmt = null;
HttpSession session = request.getSession();
String username = (String) session.getAttribute("username");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Properties properties = new Properties();
connection = DriverManager.getConnection("jdbc:odbc:sn", properties);
stmt = connection.prepareStatement("UPDATE Photos SET Photo = ? WHERE username = ?");
stmt.setBytes(1, b);
stmt.setString(2, username);
int rows = stmt.executeUpdate();
if (rows > 0) {
RequestDispatcher view = request.getRequestDispatcher("Home.jsp");
view.forward(request, response);
} catch (ClassNotFoundException ex) {
out.println(ex);
} catch (SQLException ex) {
out.println(ex);
} finally {
in.close();
try {
connection.close();
stmt.close();
} catch (SQLException ex) {
ex.printStackTrace();
out.close();
// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
* Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
* @throws ServletException if a servlet-specific error occurs
* @throws IOException if an I/O error occurs
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
* Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
* @throws ServletException if a servlet-specific error occurs
* @throws IOException if an I/O error occurs
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
* Returns a short description of the servlet.
* @return a String containing servlet description
public String getServletInfo() {
return "Short description";
}// </editor-fold>
}But when i give file which is greater than 500 KB it shows the following error. What can be the problem???
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]The text, ntext, or image pointer value conflicts with the column name specified. i have tried with compression logic but still i cannot get. what can be the problem in this case???
I am using SQL server 2005.Maybe this site will have some useful info.
-
Thumbnail to larger image rollover
In GoLive CS, now that I've learned how to do a regular rollover, I'm trying to do a rollover where a larger image appear (possibly with a brief caption) over or near a thumbnail image. I've searched other threads here about this with suggestions for Lightbox, etc. which I'll consider. But can this simply be done with GL alone? I tried it using the Rollovers and Actions palate but the larger image that appears over the thumbnail is no larger. Does Layers have something to do with a solution (never worked in Layers)? Perhaps there's a tutorial for this?
In article <[email protected]>,<br /> Wayneswhirld <[email protected]> wrote:<br /><br />> It might work for me even though it seems to leave out the option of a <br />> caption in the larger image<br /><br />You can do that, too, by assigning another GL action to the trigger: <br />Text Swap (ID).<br /><br />First you need to assign an ID to the element - e.g. <p> or <div> - that <br />contains your text. Then add the action to the trigger link and in the <br />Inspector enter the name of the ID and the text you want displayed when <br />the action is triggered.<br /><br />I have two samples here, one on click the other on hover:<br /><a href=http://www.simnet.is/klipklap/golive/swaptext/><br /><a href=http://www.simnet.is/klipklap/golive/swaptext/sample.html><br /><br />-- <br />Cheers Martin
-
Large images may appear as black blocks. I've used 9GAG as an example because it happens quite often on 9GAG (so it was easy to find an example), but it happens on some other websites too. The images are displayed correctly in other browsers.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
So frustrated!!!! mouseover to display larger image
I've searched all day for the answer, been sent 400 lines of
code that I couldnt understand, read the tutorials... got nowhere.
so, here we go...
I have 3 images. 'Front.gif' 'back.gif' and 'detail.gif. I
sell dresses. I want the user to be able to click on the small gif
'front' and for the large image of the front of the dress to appear
(on the same page but different location to front.gif). Then the
user clicks on 'back.gif' and the front picture of the dress is
replaced with the back view. then repeat for the 'detailed' view of
the dress.
all pictures/photos the the dress (front, back and detail)
are the same size.
I've tried layers, rollovers, swaps, crazy code that got me
half way. I feel like dreamweaver is laughing at me saying "just
click on that blue button and thats it"!!!!!
thanks, kitty"Michael Fesser" <[email protected]> wrote in message
news:[email protected]...
> .oO(P@tty Ayers ~ACE)
>
>>"Michael Fesser" <[email protected]> wrote in
message
>>news:[email protected]...
>>
>>> I understood it like this: There are some small
pictures and a single
>>> area to show a large image. If you click a small
image, a larger version
>>> will appear in that specific area of the page.
The same thing happens if
>>> you use the eBay gallery to attach multiple
images to an auction.
>>
>>Well, here's what she said:
>>
>>[...]
>
> I know what she said. Question is how you understood it.
I've understood
> it the way I described and how I've seen it done many
times on all kinds
> of websites: shops, eBay, galleries, even Flickr albums
look like that.
>
>>Clicking a small picture of the front of a dress
makes a similar larger
>>image appear. So far so good.
>>Then, say I'd like to see a picture of the back of
the dress, and a
>>detailed
>>view. How can I find those? Pretty much only by
random guessing and
>>clicking
>>everywhere, because to see the back you have to click
on the front, and to
>>see the detailed view you have to click on the back
view.
>
> Ah, that's the ... hmm ... what is "des Pudels Kern" in
English?
> www.dict.cc suggests "The gist of the matter"? Anyway.
>
> Of course this would be a confusing and user-unfriendly
design. But it's
> not how I understood the OP. To me it seemed to be
intended more like
> this:
>
> +--------+ +-----------------------------+
> | | | |
> | front | | |
> | | | |
> +--------+ | |
> +--------+ | |
> | | | |
> | back | | big image |
> | | | |
> +--------+ | |
> +--------+ | |
> | | | |
> | detail | | |
> | | | |
> +--------+ +-----------------------------+
>
> As said - quite common.
>
> At least I think I've understood your interpretation of
the original
> posting now and the problems you see with it. Now it's
up to the OP to
> make things clearer. ;)
>
> Micha
Ok, maybe you're right.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet -
Gallery - Link from large image
Having started with the spry image gallery, I am having
trouble adding a link using the large image. Anyone know how to
extract the image ID and make it a link for the large image to go
to a detail page.Hi Henry,
Here's a way how to do that:
1. Add a js function that sets a new url for the image
onclick everytime the source of the image changes. Add it in the
head of the page (right after the XMLDataSets declarations):
// this function is called every time the source for the main
image is changed
function SetMainImageLink(curRow) {
var img = document.getElementById("mainImage");
if (!img)
return;
var path = 'product_detail.cfm?ID=' + curRow["@path"];
img.onclick = function() {
window.location.href=path;
2. open gallery.js file and locate this function: "function
ShowCurrentImage()"
3. call SetMainImageLink from within ShowCurrentImage. Here's
the full source for the modified function ShowCurrentImage()):
function ShowCurrentImage()
var curRow = dsPhotos.getCurrentRow();
SetMainImageLink(curRow);
SetMainImage("galleries/" +
dsGalleries.getCurrentRow()["@base"] + "images/" + curRow["@path"],
curRow["@width"], curRow["@height"], "tn" + curRow["ds_RowID"]);
4. (optional) you can edit the img tag and add a style on it,
so it display a hand cursor when you mouse over it.
<img id="mainImage" alt="main image"
style="cursor: hand; cursor: pointer;"/>
Hope this helps you,
best regards,
Dragos -
Web Flash Gallery: Problem setting Large Images size
When using the Lightroom Flash Gallery I am not able to change the size of the Large Images (Web | Appearance | Large Images | Size). When I set the size to Medium or Small, the large images always ends up with the same size as when set to Large. Only when setting the size to Extra Large there is a slight change in size.
How can I change the Large Images size to Medium and Small?
Jørgen Johansonjools2005 wrote:
Adobe please address this issue.
This is a User to User forum not official Adobe support. Yes, Adobe staff may participate from time to time, but not often enough that you can depend on them reading your post. Therefore, I suggest that you support a bug report using the facilities provided at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform -
[IDEA] Too large images ...
Hi Guys,
I see often post edits by moderators where the post contains full size image's, i saw today already 4 edits.
So, is it an idea to write a plugin in PHP or JS to check their topic post before submitting for too large images or resolutions pasted here ?I have touched more than my average number of over sized images today. I think you have missed a few
Regardless of whether we automatically detect over sized images is not really that important. First, there are some threads where we don't want to impose limits. There are some image threads where there may be the expectation that there may be some large images. (case in point, I'm bored, lets have an image game thread). Others are a bit Gray (like share your .... desktop). Aside from image threads, people don't expect large images.
Personally, I don't worry about large images in terms of x and y dimensions. What I worry about are the people who pay by the bit, or who have low speed connections. People who pay through time or bit do not want to be surprised by large images.
I hope that by changing images to links I don't change the utility of these forums. Regardless, that is our policy. -
Large images --java.lang.OutOfMemoryError browser
Hello,
i am loading a tif file of 174MB into an signed applet.Problem is its not loading very large images in browser,but works fine in appletviewer(1 min) bcus(if i am correct) appletviewer use more JVM memory and i think browsers JVM use 16mb(whihc is not sufficient for loading large images) ,but i increased memory,still its not loading.Anybody has any solution for this,please help me
thanks
hitheshHi Everyone.
i forced my java console which is used by both IE and NN to use 256m
like -Xmx256m.now its loading large images of 175MB.
but any of u guys know how to force it in applet code,so that user who is using my applet doesnt have to bother about doing it?
thanks
Hithesh Gazzala -
How do you create a rollover so larger image appears nearby?
I'd like to create a rollover so that when your mouse moves over the first, the rollover appears as a larger image near to the first.
You can do it with pure CSS, too.
Disjointed Image Rollover -
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
Disjointed Image Gallery -
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Gallery.shtml
Disjointed Menu Rollover -
http://alt-web.com/DEMOS/CSS-Disjointed-Menu-Rollover.shtml
Disjointed Text Rollover -
http://alt-web.com/DEMOS/CSS-Disjointed-Text-Rollover.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Web Appearance Large Images Extra Large: how to increase size
Hi!
When selecting Web > Appearance > Large Images > Extra Large
Lightroom exports the fotos 1275 px wide.
I would like to have them quite a big larger - where can this setting be edited?
Thanks a lot for your time!
Andreas Weber
www.motiondraw.comTake a look at this page....
http://lightroomers.com/lightroom-question-of-the-week-advanced-web-settings/123/
Depending on which web gallery you are using, the advanced settings may do what you need.
John -
Create a rollover image that appears in a different box?
Is there a way to create a rollover so that when your mouse moves over the first, the rollover appears as a larger image (right next to / above / over) the first?
Pure CSS Disjointed Menu Rollover
http://alt-web.com/DEMOS/CSS-Disjointed-Menu-Rollover.shtml
Pure CSS Disjointed Text Rollover
http://alt-web.com/DEMOS/CSS-Disjointed-Text-Rollover.shtml
Dreamweaver Disjointed Rollovers with Image Swap behaviors
http://www.communitymx.com/content/article.cfm?cid=E11E8
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com
Maybe you are looking for
-
How do I make my all-in-one HP printer wireless for my laptop?
I have a HP Photosmart C7250 All-in-One printer. Just bought a HP Pavilion dv6-6113ci Laptop. I have a Netgear modem. Instructions in book to convert to wireless is in Greek to me. Is there an easy fix to making my printer wireless??
-
My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.
-
Dynamic Connection Pool fails in WLS 6.1
Hi all, I am trying to create the connection pool dynamically but it fails saying " Error to load the Driver" Snippet Code -- Hashtable env = new Hashtable(); env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory"); // URL f
-
Multi GR's Single CENVAT Credit
Hai Friends, I have one issue.I have raised one PO with 2 line item with same material.. delivery dates different. I have received multi Deliveries, So i have done 2 GRs.. How can i do single CENVAT Credit avail. Please help it out
-
SOLMAN_SETUP not working after login
Hi, We have installed solution manager, and trying to configure it using Tcode SOLMAN_SETUP, this Tcode is not working, it opens browser fine, but with some warnings: Then after I input the password and user name of user "ddic" and press the login bu