Rollover on one image and another jumps up!

Please respond to my email: [email protected]
How do I solve this problem-- In my image gallery, I mouse
over on an image and up comes the image, HOWEVER, another image
jumps up too.... Since all five images are in a row with space
between each. When I mouse over, one or two more images sometimes
jump up when they are not supposed to. HOW DO I SOLVE THIS????
HELP.
There are eight frames on timeline for the tweening. I click
on SCENE, and choose ACTIONS: the Actionscript I put in separately
for each movie clip is shown below:
on (rollOver) {
this.gotoAndPlay(2);
this.swapDepths(1);
on (rollOut) {
this.gotoAndPlay(8);

This worked for me:
1) Figure out what the broken genre is, and where it goes.  For example, I would touch "Rock" and get a list of "Pop".
2) Remove from the device all songs from the targeted genre ("Pop" in my example), while keeping songs that belong to the broken genre ("Rock" in my example).  I sync everything, so for me this meant changing to "Selected playlists, ..." and then checking all the genres except the one I didn't want.  (Renaming the targeted genre will not work.  The songs need to be removed.  I found that there seemed to be one song that triggered the bad link.)
3) Use the device to access the broken genre again ("Rock" in my example).  It will re-index (this took a few seconds for me) and then display the correct entries for the genre.
4) Repeat steps 1-3 for any other broken genres.
Certainly this is a bug, but these steps allowed me to work around it.

Similar Messages

  • How can I take an item from one image and move it to another image?

    How can I take an item from one image and add it to another image, and rotate it to fit?

    Carefully select the objects of interest in one image and then copy, scale and position them into the other image. Then touch up the composite.
    Have to Love Photoshop for Retouching Images!

  • The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

    The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

    You really are not getting this.
    "I guess I am still completely shocked that as a parent we can't download something for everyone to use."
    Why do you continue to think this although we keep telling you that this is not the case.
    You do NOT have to purchase anything twice.  You can share the music with as many ipods as you like in your household.
    The ipods are designed to sync with your computer regularly.  You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
    Take on of the ipods with the music in it.  Open itunes on your computer.  Plug in the ipod.  Do not sync.  Click File>Transfer Purchases  This will transfer the purchases from the ipod to the computer.  Make sure that you have authorized your account on the computer:  here are directions for that. http://support.apple.com/kb/HT1420
    Unplug the ipod.
    Plug in the other ipod with purchased music.  Do not sync.  Click File>Transfer Purchases  This will transfer purchases from the ipod to the computer.
    You can now plug in any of the ipods, select what you want to sync and sync.
    Have a look at the manual for the ipod.  http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • Is it possible to clone an object from one image and paste it on another image?

    Is it possible to clone an object from one image and paste it on another image in Aperture?

    As Frank said,
    but Aperture has a nice clone tool - the drawback is, that it only works within one image.
    What I sometimes do - as a workaroud, when I want to use the clone brush, is to combine the image I want to clone from and the image I want to clone into, into one single image by printing them together to pdf as jpeg. Then I can clone from the second to the first, for example, to be able to add an fairy to a flower: Picking up the head of the fairy in the right image and brushing it into the left one. Occasionally I prefer the Aperture brush to the Photoshop lasso.

  • How do I copy layers from one image to another?

    I am editing figures for a journal and I need arrows for multiple images.  Is there a standard arrow?  I can only see free hand.  If I use a free hand arrow I then want to copy it to the other images for consistency.  How do I copy or share layers between images?

    There are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.

  • How to exchange one image for another with a click

    I am brand new to actionscript, so bear with me! I need to create an interactive web-based system which takes the user through steps to assemble something. One of the pages will have images of the tools needed. I want the user to be able to 'tick' off each tool, so that when they click on the image of a specific tool it is replaced by the image faded out and a big red tick over it. essentially it is replacing one image for another when it is clicked on.
    any ideas on the actionscript? Sorry i know this must be basic stuff for you!
    thanks!

    your tool images should be converted to movieclips and given instance names and you should create a red tick movieclip that you assign a class, say RedTick.  you can then use:
    tool1.addEventListener(MouseEvent.CLICK,toolClickF);
    function toolClickF(e:MouseEvent):void{
    var redtick:RedTick=new RedTick();
    addChild(redtick);
    redtick.x=e.currentTarget.x;
    redtick.y=e.currentTarget.y;
    e.currentTarget.alpha=.4;

  • I have a dual monitor setup.  When I paste develop settings from one image to another, Lightroom switches the active window.

    Strange problem.  Lightroom 5.5.  Windows 8.1. Dual monitor setup.
    I'm processing a large batch of photos.  I have Monitor #1 set as my main develop window, with Monitor #2 set only to display a larger version of the image I'm working with. If I copy the develop settings off of one image and try to paste them onto another image, Lightroom will switch from Monitor #1 to Monitor #2 as the main develop window, and will not display anything on Monitor #1.
    If I then try to paste develop settings onto another image on Monitor #2, LR will then display a larger version of the image I'm working with on Monitor #1.
    To work the way I want to, I have to continually drag my develop window back to Monitor #1 every time I try to paste develop settings onto a new image. How can I make this stop?

    I just tried what I think you’re saying you’re doing and I don’t have the problem with LR 5.5 on Windows 7 SP 2.
    Does the same thing happen whether you use the key shortcuts vs the Settings / Copy/Paste options on the menu?
    I ask this because if you’re using the keyboard shortcuts, maybe you have some display-manager program that has bound itself to the Ctrl-Shift-V (paste settings) to the function of move-to-other-monitor which would do at least part of what you describe.
    You can also test this theory by doing a Ctrl-Shift-V with an application other than LR as the active window and see if it moves.  I suppose Ctrl-Shift-C might also play into it so try both of these hot-key combinations with a program that isn’t LR.
    If none of this sheds any light on the situation, then give a more detailed description of the low-level functions you’re doing to accomplish the copy-paste of settings, so someone else could replicate the steps exactly.
    Specific detailed steps, like:
    left-click on source photo’s thumbnail in the filmstrip
    press Ctrl-Shift-C to copy the settings
    click Check-None
    enable the white-balance and calibration checkboxes
    click Ok
    left-click on destination photo's thumbnail in the filmstrip
    click on Settings / Paste Settings in LR’s menus to paste the settings to the selected photo

  • Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Good day!
    A simple Paste does not work for you?
    It should place the clipboard content as a new Layer which you can then move around.
    If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
    Regards,
    Pfaffenbichler

  • How do I superimpose one image over another

    How do I super impose one image over another?

    Open image A
    Open image B
    On image B, use one of the selection tools, e.g. selection brush, lasso tool, to select the object which you wish to "superimpose"
    Go to Edit menu>copy to put the object on the clipboard
    Go back to image A
    Go to Edit>paste. The object will be on its own layer
    Get the move tool out of the toolbox, and position the object and resize, if indicated

  • Paste from one image to another I get 'Paste Path'?

    Photoshop CS4  / Windows 7
    When I try to copy and paste from one image to another I get 'Paste Path' in the layers menu, but no pasted image appears. What have I done? - IM

    You probably have a path selected in the Paths panel in that image (or a Vector Mask active but that's the same thing). Go to the Paths panel and deselect the active path before copying

  • Replacing colour/texture from one image onto another?

    Desperately need some guidance here as this has been driving me nuts....
    I want to use the colour and texture from one photo onto my own design. Now, using the rubber stamp tool I am able only to clone a certain area that moves with the cross hair, but how can I clone a section from one photo and use that as a fill to create another design? In other words, clone a colour from one photo as a colour fill for another design?
    Even using the colour replace tool and selecting source: image I am left with the colour pallette as the destination and cannot use the colour from the image to paint my new image from it.
    Thanks a heap

    If I want to copy a single color from one image to another, here's what I'll do:
    Create a new rectangle in the source image
    With the rectangle selected, use the eyedropper to pick a color from someplace in the source image
    Copy the rectangle and paste it in the destination image
    Select the object I want to color and use the eyedropper tool to select the color from the copied rectangle
    (A layer with rectangles of different colors is sometimes handy for setting up a color scheme and using it consistently.)
    You can also create bitmap patterns to use as fills for vector objects. Fireworks comes with quite a few, but it's easy to add your own. Here are a couple of tutorials
    http://www.entheosweb.com/fireworks/patterns.asp
    http://www.peachpit.com/articles/article.aspx?p=30942&seqNum=4

  • How do I copy one image onto another image?

    How do I copy one image onto another image?

    Lots of ways;  Use the Place command to place a file in another.  Open two files and drag one to the other's window tab, drag an image from bridge onto an open file.  Open an image, press ctrl/cmd-A to select all, the ctrl/com-C to copy the image, the ctrl/cmd-V to paste it into another image.

  • How best to copy keywords from one image to another?

    Hey everyone,
    I can't seem to find a good, obvious way in Bridge CS3 2.1 to copy just the keyword tags from one image to another.
    I realize that one possibility is to create a metadata template for the source image and apply that template to the destination image, but this would be a cumbersome & lame workflow IMHO.
    I also realize that Bridge allows loading and viewing many images simultaneously, and that the same set of keywords can then be applied en masse. I'm sure many users like this workflow, but I'm not one of them. For one thing, this approach is seriously not future-proof. What if the user goes out and takes more photos that fit into those same keyword-categories that were applied to the image group?
    It seems to me that Bridge should allow the user to right-click on the list of applied keywords (at the top of the keywords pane) and see a "copy keywords" command. And then the user should also be able to right-click on an image and see a "paste keywords" command.
    Comments appreciated,
    Thanks,
    Brad

    There are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.

  • Moving layers from one image to another in tabbed windows

    I don't know if it's currently possible, but I've tried every which way.  But I have 8 adjustment layers I want to move from one image
    to another in the tabbed window interface.  Once selected, COPY LAYERS is grayed out.  I tried to ALT + DRAG them to the image tab I wanted to move them to but it never focuses the tab and I cannot move the layers over.

    Well if I knew the feature exists in one way or another, I wouldn't have posted it in the Feature Requests.  It was because it seemed to be absent that I did.
    I enjoy a tab-less experience, however I abhor how PSCS5 handles non-tabbed documents in Windows 7 taskbar.  it opens a unique block for each open document you have.  So if I have 20 images open as I'm slicing up a design, I have 20 Photoshop CS5 blocks at the bottom.
    I don't like the Windows 7 "Taskbar Grouping" because when you click on Photoshop, it doesn't just go to Photoshop like it should, it instead opens up a menu for you to then select Photoshop (and focus it as wanted) or select an open image.
    These all seem to be steps backwards...

  • How do I insert part of one image into another in Elements 8?

    I am testing Elements 8 and would like to, for example, take an eagle from one image and insert it into another.  I've done this with other editing programs, but can't see how to do it here.  If one is to use layers, then I have another problem.  How does one open layers from more than one image in the palettes?

    MS993 wrote:
    I am testing Elements 8 and would like to, for example, take an eagle from one image and insert it into another.  I've done this with other editing programs, but can't see how to do it here.  If one is to use layers, then I have another problem.  How does one open layers from more than one image in the palettes?
    You can only view the layers of one image at a time. I believe E8's default setting is a maximized setting which allows for only one image in the workspace. If you change the setting in the menu to Cascade, you can have several images open in your workspace. I believe, that's under Window<Arrange.  The layer's palette will display whichever image is currently selected.
    There are several ways to do it. Here are a couple...
    Copy/Paste...
    One way is to select the eagle with a selection tool...magnetic lasso whatever...then copy the eagle into your clipboard. Edit<copy. (Shortcut = Ctrl + C on PC; Cmd + C on Mac).
    Open the second image then paste. (Shortcut = on PC Ctrl + V; on Mac Cmd + V). This will add the eagle to the current image. Use the move tool to position the eagle.
    Drag/Drop...
    Alternately, change window<Arrange in the menu bar to Cascade. This will allow you to have more than one image in your workspace.
    Open both images. Select eagle with a selection tool. Once selected, switch to the move tool. Drag eagle into second image.
    Alternately, you could also lift the eagle to it's own layer then drag it over using the move tool. Release the mouse button when you are over the second image to drop the eagle. (Shortcut to lift selected eagle from the background to it's own layer = on PC Ctrl + J; on Mac = Cmd + J.)
    Note: Both images should be the same or close to same resolution. The image that is dragged will adjust (resize) to match the background image resolution. (Low resolution images dragged into high resolution images are tiny whereas high resolution images dragged into low resolution images would be huge).

Maybe you are looking for

  • I can't open itunes it's giving an error "The Itunes Library.itl file is locked, on a locked disk, or you do not have write permission for file.

    yes itunes will not open it gives me an error that the file itunes library.itl is locked or on a locked disk or i don't have write permission for it.

  • Target to execute multiple junit tests from jar file

    I have written a custom selenium framework using JUnit and Selenium, problem I am having right now is our team wants to run the tests inside HP Quality Center (I have no idea or any experience with Quality Center) but if I provide a jar file the them

  • Errors in standard code in NWDS

    I am trying to modify standard ESS/MSS source code. But lot of code there is marked in RED to say that it is an error code ( Which in reality is not). And even when i press CTRL + Space to get context help for commands it does nto work. I logged off

  • Separate Album art for each episode.

    I have a video podcast that I set up and I'm trying to make separate album art for each episode- unfortunately I have no idea how to even go about this. I'm prepared to edit the xml file if I need to, as long as someone can walk me through it. thanks

  • 2960 Switch Console Hangs

    I am having issues with Catalyst 2960 Switch Console. Switch boots up fine and the process shows up on the console. But after the boot-up, console stops responding. It also does not respond to Break sequence at the boot-up. Any solutions? I am using