RollOvers work randomly
Hello, and THANK YOU in advance for anyone that can help me!
I'm rebuilding my web site and want to use Flash Drop down
menus. I found a great
tutorial
online that helped me build these out, but have one glitch I can't
seem to figure out.
You can view the menu here:
Drop down menu
This issue is on the two Movie Clips that have drop down
menus attached (Solutions & Portfolio), the rollOver works
randomly when you mouseOff them going to the left. It works
perfectly each time when you mouseOff to the right, just not the
left.
So the Solutions and Porftolio movie clips reside on frame 1
with this action assigned:
on(rollOver) {
gotoAndStop("open");
Frame 10 is labeled "open" and on frame 10 in one layer are
the drop down buttons, and on another layer (on the same frame) is
an invisible button that covers the Movie clip and its drop down
buttons.
The invisible button has this action assigned:
on (rollOver) {
gotoAndStop("closed");
Frame 1 is labled "closed" and just has the top level movie
clips on it.
I'm tearing my hair out on this one, and tried to contact the
person who wrote the tutorial with no luck.
THANKS AGAIN FOR ANYONE THAT CAN HELP!!
Kerri
I just found the forum of the person that created the
tutorial I used to build these menus. I will see help
there...
Similar Messages
-
Rollovers work in iweb - but not online
I have created a website in iweb with several hyperlinks just by highlighting a line of text and making it a link. The normal,rollover and visited colors work fine in iweb. However, once I go online to see my page the rollover color does not show when I hover over the link. The problem only exists on one page in a few text boxes but everywhere else the rollovers work. Any ideas on how to fix this problem? Could it have to do with the font?
Thanks so much everyone!!
OT: I will definitely try out a test page. Thx!
Fineligh: Thank you! My boss actually designed it and I've been building most of it out. iWeb is super fun.
Mark: I checked and I did not make the actual boxes a hyperlink - just the client names.
Jeff: Each red client name is fully selected and activated as a hyperlink. But thanks for the advice - sometimes the most simple thing is what sets everything out of whack.
jcerno: In iWeb open your Inspector window (which you can find in your bottom menu bar). Once you open the Window there are icons on the top - click on the arrow. There you can enable images or text as a hyperlink and format the colors/rollovers. If you're not using iWeb than I'm not sure I can be of much help - I'm still new at learning web design. I'm a print person 100%! Good luck.
~ A very perplexed NewPlanet1 -
Sound working randomly in flash, vlc, gnome-mplayer since today
Hello,
My sound setup worked perfectly since my Arch install, but I see today that now my sound setup works randomly in flashplayer, vlc media player, and gnome-mplayer :S
My channels aren't muted in alsamixer, of course my speakers are on...
I don't see where the problem is :s
Any idea ?
Thank youOkay, I found the problem:
I thought that this bug happened randomly, but it's not the case
In fact, I don't lost the sound, but every time I start playing a file with gnome-mplayer, the PCM channel of my sound configuration is significantly decreased
I saw that by running alsamixer when I noticed a sound problem
Is that a "feature" or a bug ? -
Dell N5040 Wifi works randomly.
Hello everyone. I installed Arch recently and everything works fine except for the wifi. I can use wifi-menu to connect to my network, but the connection will only work randomly.
I have to connect multiple times to get it to work. The connection is not dropped and iwconfig reports a signal strength above 80%, but if I try to ping google.com, it simply hangs there without any output. Sometimes, the connection will work for the first few seconds and then stop, without disconnecting. Also, I am not able to load any webpage when it does that. The browser just keeps saying "Connecting to ...". I have already tried to put ipv6.disable=1 in my kernel line with no results. Here is my iwconfig output:
[cgroza@CArch ~]$ iwconfig
enp19s0 no wireless extensions.
wlp18s0 IEEE 802.11bgn ESSID:"BELL056"
Mode:Managed Frequency:2.452 GHz Access Point: 2C:E4:12:A4:C3:7F
Bit Rate=28.9 Mb/s Tx-Power=19 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=67/70 Signal level=-43 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:136 Invalid misc:2 Missed beacon:0
lo no wireless extensions.
I am posting from Arch, because this is one of the random times when wifi actually works.
This is my wifi card:
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
I am using the default driver included in the kernel.
Thank you for your assistance.
Last edited by cgroza (2013-10-09 20:49:25)I tried doing this. I followed the instruction on the wiki. The module was loaded and my networks were detected but wifi-menu could not connect. No error whatsoever. iwconfig confirms this. So I had to undo the changes to get the random functionality back.
Thank you for your time anyway. -
Hi,
the pm-utils arent working correctly since I reinstalled Arch. I did everything the same manner as before. I installed pm-utils, added my user to the power group and even added the pm-commands to the sudo file so that I don't need a password. It seems to work randomly .. sometimes I am lucky and it works 10 times in a row and other times it doesnt even work once out of 10 trys.
I dont know why it doesnt work and I dont know which infos you need for successfully locating and fixing the problem. So lets start with you telling me, which information you need (it worked without problems before)Ok, I found out, that there is an pm-suspend.log, but that file seems just fine after a notworking suspend.
db@kirodema ~ $ cat /var/log/pm-suspend.log
Initial commandline parameters:
Mo 13. Sep 18:00:02 CEST 2010: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux kirodema 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 16:22:18 UTC 2010 i686 Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 239277 14
fuse 54698 3
hdaps 7604 1
ext2 56204 1
btusb 9745 0
bluetooth 44753 1 btusb
uvcvideo 53488 0
videodev 39124 1 uvcvideo
v4l1_compat 13562 2 uvcvideo,videodev
arc4 1070 2
ecb 1589 2
snd_seq_dummy 1079 0
iwlagn 244259 0
iwlcore 104224 1 iwlagn
joydev 7503 0
snd_seq_oss 25104 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
i915 266496 2
snd_hda_codec_conexant 25826 1
mac80211 167958 2 iwlagn,iwlcore
snd_pcm_oss 33662 0
drm_kms_helper 22011 1 i915
pcmcia 32127 0
snd_mixer_oss 14686 1 snd_pcm_oss
cfg80211 124335 3 iwlagn,iwlcore,mac80211
drm 134132 3 i915,drm_kms_helper
snd_hda_intel 19020 0
snd_hda_codec 67274 2 snd_hda_codec_conexant,snd_hda_intel
uhci_hcd 19251 0
snd_hwdep 4764 1 snd_hda_codec
snd_pcm 58308 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
thinkpad_acpi 54236 0
snd_timer 15423 2 snd_seq,snd_pcm
sdhci_pci 5774 0
sdhci 14341 1 sdhci_pci
nvram 4749 1 thinkpad_acpi
snd 43283 12 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,thinkpad_acpi,snd_timer
rfkill 12854 3 bluetooth,cfg80211,thinkpad_acpi
tpm_tis 6420 0
soundcore 5025 1 snd
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
mmc_core 47268 1 sdhci
led_class 1843 2 thinkpad_acpi,sdhci
tpm 9793 1 tpm_tis
tpm_bios 4629 1 tpm
i2c_algo_bit 4407 1 i915
firewire_ohci 20270 0
firewire_core 38941 1 firewire_ohci
crc_itu_t 1053 1 firewire_core
yenta_socket 19842 0
pcmcia_rsrc 9464 1 yenta_socket
pcmcia_core 10636 3 pcmcia,yenta_socket,pcmcia_rsrc
ehci_hcd 32860 0
usbcore 121705 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_i801 7426 0
i2c_core 15599 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
battery 7879 0
ac 2329 0
tg3 115656 0
psmouse 51529 0
libphy 14543 1 tg3
iTCO_wdt 8677 0
iTCO_vendor_support 1433 1 iTCO_wdt
intel_agp 24087 2 i915
agpgart 23520 2 drm,intel_agp
wmi 5962 0
sg 20932 0
video 15889 1 i915
output 1448 1 video
button 3746 1 i915
evdev 6820 19
thermal 9786 0
serio_raw 3566 0
cpufreq_userspace 1560 0
cpufreq_ondemand 6971 2
acpi_cpufreq 5157 1
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
processor 25126 3 acpi_cpufreq
mperf 979 1 acpi_cpufreq
tp_smapi 15845 0
thinkpad_ec 4101 2 hdaps,tp_smapi
rtc_cmos 7746 0
rtc_core 11831 1 rtc_cmos
rtc_lib 1494 1 rtc_core
ext3 110740 2
jbd 39247 1 ext3
mbcache 4290 2 ext2,ext3
sr_mod 13313 0
sd_mod 26768 5
cdrom 31410 1 sr_mod
ahci 17813 0
libahci 16174 5 ahci
libata 140707 2 ahci,libahci
scsi_mod 105888 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 1956992 480692 1476300 0 16808 270668
-/+ buffers/cache: 193216 1763776
Swap: 4000180 0 4000180
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
/usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Mo 13. Sep 18:00:02 CEST 2010: performing suspend
I cant find anything bad here, but I am not familiar with the pm-utils -
After Service, Airport card stops working randomly on macbook pro 17" early 2009
Hi,
So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
And all this started happening the moment my warranty ran out. Extremely frustrating!!It may be possible that one of the following may be the issue:
The internal AirPort Extreme card is not seated properly.
The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
The internal AirPort Extreme card's connector is faulty or damaged.
The internal AirPort Extreme card is faulty.
To get an idea on how the Extreme card is installed, please check out the following iFixit article. -
Nokia 9500 - buttons working randomly.
Just dropped my 9500 on the floor. The top two side buttons and phone power button on front cover now work randomly. The two bottom side buttons and front pad key buttons do not work at all. All QWERTY buttons work OK. I disassembled the phone to the very last bit and checked all connectors etc, but everything seems to be fine. I noticed there is a small battery inside the phone which had lots of oxide on it.I tried to format Ctrl Shift F, but was unsuccessful as the top side button never worked at this stage!
Any clues?
Julian.Hi,
if battery removal or reset does not help, your phone might need repair. -
The devices that die right away are the network adapter and any USB memory stick plugged in, they still have their lights and all running but aren't recognized in "This PC" and the network adapter isn't found in "Control Panel\Network and
Internet\Network Connections".
My keyboard, wireless mouse that runs through the keyboard's USB ports and the external HDD remains functional UNTIL I pull the plug on them, after that plugging them back in does nothing.
I put randomly in quotations because it seems to fail more often when I download something at speeds over 3Mb/s, for an example downloading Hearthstone through the Battle.Net client will more often than not make the issue happen after a little bit. BUT it still
happens randomly during NO network load what-so-ever.
Parts:
CPU| FX-8350
GPU| Radeon 5850
Motherboard | Crosshair IV Formula
RAM | 2x DDR3
PSU | 700W Gold
SSD| Evo 850
OS | Windows 8.1
I HAVE:
* [Downloaded these chipset drivers](http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2064)
* Installed all Windows 7 drivers I could find except the BIOS ones due to lack of Windows 8.1 drivers from http://www.asus.com/Motherboards/CROSSHAIR_IV_FORMULA/HelpDesk_Download/
* Turned off "Allow this computer to turn off this device to save power" in Device Manager for ALL devices in the USB tab that had the option, and the Network tab.
* Set the Power Options to high performance and disabled "USB Selective Suspended Setting"
I simply don't know what to do anymore and it's breaking me down, I need this fixed before the weekend or the LAN I'm planning to go to will be a disaster and I'll probably go insane trying to solve this myself.
Just tell me whatever more information you could need and I'll supply it, I'm desperate to get this solved.
**I never had any of these issues on my old PC that had different parts but the same network adapter and external HDD so they are not to blame for this, same for keyboard and mouse.**Hey, I hope this helps you out a bit... I have had the same issue on my Asus K55A notebook with Win8.1 Pro x64 from the beginning! Thru my extensive research I found something interesting and the possible cause to all this! What I found was that by design
the xHCI Host Controller has virtual HS 2.0 Ports linked to the 3.0 Ports... Enabling compatibility with 2.0 devices ok... What happens is that the xHCI stack is unstable just like you say... The ONLY WAY I was able to fix the problem was by unlocking the
UEFI/BIOS to allow me full access to USB Configurations... I had to disable 2 of the HS ports under the xHCI Controller since I have only 2x 3.0 ports... This allowed 3.0 devices to be enumerated correctly under the xHCI stack and 2.0 devices now were enumerated
under the EHCI 2.0 stack... That's what worked in my case... I'm still digging around for more info about this issue because I find it so odd that no one discovered this when designing xHCI stacks and drivers at MS for Win8/8.1 x64... I hope I shed some light
on this issue... Good luck and keep us posted!
Hi, Sebastian. I have the same problem but i'm getting crazy trying to solve it. Can you help me to unlock the UEFI to access full USB config? and give me some suggestions on how to solve the problem?
My mail is roquen(at)gamail(dot)com
Thanks in advance! -
Adobe Illustrator CS6 has stopped working (random)
I have a problem with Adobe CS6 Illustrator both 32 and 64 bit has this error. It keeps crashing randomly and i get the message Adobe Illustrator has stopped working.
All updates are installed for illustrator.
System specs:
Core i5 2500K
8GB DDR3
Radeon HD6450 512MB
Windows 7 Professional SP1 + all updates
I already reinstalled the whole system but it wont help.
Does anyone know what to do?
Details of windows error log:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-04-11T08:08:39.000000000Z
EventRecordID
6336
Channel
Application
Computer
WS-STUDIO2.mrpresent.local
Security
EventData
Illustrator.exe
16.0.3.691
50bb31df
dvaui.dll
6.0.0.0
509ac3fb
c0000005
0000000000175411
1360
01ce3676fa872485
C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\dvaui.dll
042ca9ac-a27f-11e2-a351-b4b52fb90bc3Hi,
If you are sure that there is no permission issue than i will suggest you to contact Adobe support.
They will check your log file to find the exact reason for this error. Here is the link below for Adobe support.
http://www.adobe.com/support/chat/ivrchat.html
OR
http://www.adobe.com/company/contact.html -
Rollovers work in Netscape but not IE?
I have the rolloverbuttons working great with Netscape but when I run my app in IE the images aren't showing up. The jar is loading fine and when I use the default rollovers ( [ROLLOVER]exit ) they work fine, but my images aren't showing up. Thanks for any and all help.
Jeremy.Hytrical wrote:
The site www.lamps-on-line.com has rollovers and actions created a few years ago in GoLive and now these effects only work in Firefox, but not in Interenet Explorer (IE7) which displays page errors.
I didn't see any errors when I looked at yourhome page in IE7 (on Vista). So which page elements were producing an error and what was the error you were seeing? Did you delete the cache in IE7 to check whether it was a caching problem? Tools > Internet Options > Browsing history (choose to delete)?
John -
Bluetooth and Built-in keyboards stop working randomly
While I've read several threads about the built-in keyboard on MBPs stop working I've never seen one quite like this. We're on a late 2012 17" MBP, Core i7 with 4GB memory. Randomly both the built-in keyboard on the machine AND the Bluetooth keyboard stop working - but not fully. On both the arrow keys and backspace key still work but nothing else (CMD, space bar, etc).
What's really odd is a USB keyboard works perfectly when this happens. We plugged one in and blamo, it worked just great - but the built-in and the bluetooth ones continued to not work (just as described above).
The user commented that this has been the case on her last 2 machines and both were built from scratch. That leads me to think it's software rather than hardware - I went through everything that was running, shutting down everything I could - with no good results. If you log out/back in (or reboot) that fixes the problem as well (further leading me to software)
Thoughts anyone??
Thanks!
-RossHello RosslnCO2,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Best of luck,
Mario -
Hi there!
Exchange 2010 sp3
Outlook 2010
Two domains in different sites.
A domain user in SITE1 and DOMAIN1 has an mailbox on SITE2 DOMAIN2.
He is chosing to send from distribution group on SITE1 and DOMAIN1. Sending mail randomly works. Sometimes it goes thru other times the user needs to resend the message over and over again until it passes.
Error messages are sth like:
You can't send a message on
behalf of this user unless you have permission to do so. Please make sure
you're sending on behalf of the correct sender, or request the necessary
permission. If the problem continues, please contact your helpdesk.
Do you maybe know where should we look for the root of the problem?
bostjancYup. You do not need two separate OABs. You need to add extra locations where the *same* OAB can be downloaded. In 2010 the OAB is generated on a specific MBX server then the file replication service copies it out to the distribution endpoints
- CAS. And this list of CAS are the ones allocated to serve out the OAB. Details in here:
http://blogs.technet.com/b/rmilne/archive/tags/oab/
I do want to ask how you decommissioned 2003 - something is not right with this. What steps did you follow?
I see a note about "manually removing" 2003. Not surprised that you are hitting this as there is NO check to see what replicas and links were to those servers that get whacked out of AD. That is not something that should be done.
Williard, I think we are going to see a large uptick in these types of cases......
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Internal Mail works 100% external mail works randomly
First a little about our setup. We have 3 virtualized Exchange servers, 1 Client Access and 2 Mailbox servers. All are fully updated Server 2012 r2 machines, with Exchange 2013 CU 6 installed.
Internally everything works flawlessly, 0 problems on the inside.
Externally things will randomly quit working. For instance at the moment the OWA and ECP are working, however access from the Outlook client is not working. Then at times it will all quit working, then sometimes the Outlook client works
but the OWA and ECP will not be working. Keep in mind while all this is not working on the external side everything on the internal side is working 100%.
We have a CISCO firewall and have port 443 forwarded to the Client Access server.
Any ideas? I am at a loss. We have also had a local IT support company look at it and they couldn't figure it outHi,
Please check following KB:
Cannot send or receive e-mail messages behind a Cisco PIX or Cisco ASA firewall
http://support.microsoft.com/kb/320027
Also try to disable SMTP fixup on Cisco for testing.
If still not working, please contact Cisco Support.
Thanks
Mavis Huang
TechNet Community Support -
Why is my Intel iMac restarting randomly and USB keyboard not working randomly?
My intel iMac has been randomly rebooting itself without any error messages. It also seems to coincide with the keyboard (USB) not working, but not always. At first, it seemed to happen right after waking the computer from sleep, but now it happens when I am just sitting at the computer about once or twice a day. For now, i have temporarily removed all external devices (except time capsule) and disabled any bluetooth or iTunes synch'ing over wifi. I have also disabled all power management features.
I've tried different keyboards and resetting the SMC. Could bad memory cause this?Could be anything from a loose power cable, to loose or bad RAM module.
1. Check all your power connections, including the mag connector on the back of the iMac.
2. Reinstall the RAM modules, as per > iMac: How to remove or install memory. When installing new or reinstalling RAM, be sure to push firmly on each module with both thumbs to insure that they are fully seated in the slots.
Then if it is still acting up...
3. Run the > Extended Apple Hardware Test -
Audio works randomly after publishing
Hi, I am using captivate 2 and I have a branching scenario of
about 42 slides. When I publish it (no matter what format or
options) the output is random. Sometimes the audio in the slides
will work, other times it wont. Even in the same published
file...like if I open a published exe once, audio may work. if i
close it and open it again, the audio wont work and so on.
I usually hear audio on the 1st slide (its an intro with a
small sound clip) but when i click start to proceed, thats when the
trouble starts. After I go to the next slide, the rest of the
presentation seems muted or something. no sound for anything, slide
narration, clicks, nothing. But if I close and lauch that same exe
a few times, it will work sometimes.
I just opened and closed this published exe file 10 times. 4
of the times the audio worked..6 of the times it didnt. This is
crazy. I tried republishing, using different outputs ect..all with
the same result.
Any ideas anyone???
Thanks!I have the same problem. Sometimes "save as" and publishing
under a new filename helps. Sometimes deleting the audio track from
the timeline and replacing it helps. Sometimes nothing seems to
help. HELP.
Maybe you are looking for
-
Select Query in Crystal Report
Dear all, I have a report to be developed in which i have to fire more than 2 select quires. I am adding this quires in "Add Command" window, it doesn't give any error but gives output of first query only. I have tried to use multiple commands in rep
-
Iphoto will not open since upgrading to mountain lion
Is iphoto obselete? Should I transfer to another program?
-
Dear all, Am using cisco 2921 CME 8.6 with ios version c2900-universalk9-mz.SPA.151-4.M4.bin.. Also am using a dedicated one fxo port for a specific user to send and receive calls,, the user always faces busy tone when initiate outgoing call, the fxo
-
Guest WLAN and Web Auth?
Hi Guys, Maybe someone can help me out? I just finished setting up a trial "Cisco Virtual Wireless Controller" with nearly the same configuration as our Physical "Cisco Wireless Controller" with the exception of having 2 ports. Anyhow, I managed to
-
How to append recorded files.
Two questions. I am using adobe dvrcast to record my live streams. the problem I am having is when I stop the encode during a live stream, a new file is not created, the existing stream is written over. How can I preventive this from occuring. Is the