Root.sh failing at node2 during 10g rac installation on vmware

Hi All,
I'm very new to Oracle RAC. I was trying to install 10gr2 rac on vmware. But while running root.sh script at node 2 I'm getting error like "Failure at check of Final Oracle Stack" . For the same I tried a lot to find the solution from this forum and also from other sources but did not get any proper solution. So any help from you experts is highly appreciable. Let me tell you how I'm getting this error.
1.Install vmware and RHEL 4 as guest OS.
2.Create a virtual machine as RAC1 and configured shared storage by adding 5 virtual disks(1-ocr,1-voting,3-asm)
3.Then clone RAC1 to a new virtual machine RAC2.
4.After binding and assigning permissions all raw devices(raw1,raw2,raw3,raw4,raw5) are available in both the virtual machines.
5. Then create user equivalence for both the system and each node is reach from other node also.
6. Now when I tried to install Oracle 10gr2 clusterware it got completed at RAC1 and I ran the required scripts but while running root.sh on RAC2 I got the above mentioned error.
I did OCR check at both the nodes and found both are different. Also the cssd.log gives error message like OCR mismatch.
Now here my question is as Firewal is disabled and all the configurations are proper though I'm getting the same error.
Can anyboy provide some suggestion on resolving this issue.
Thanks

/dev/raw/raw1 /dev/sdb1
/dev/raw/raw2 /dev/sdc1
/dev/raw/raw3 /dev/sdd1
/dev/raw/raw4 /dev/sde1
/dev/raw/raw5 /dev/sdf1
The 1st one is for OCR and the next one is for Voting Disk and the rest are for asm. Also the permission are same across the two virtual machines.
root:oinstall /dev/raw/raw1
oracle:oinstall /dev/raw/raw2
oracle:oinstall /dev/raw/raw3
oracle:oinstall /dev/raw/raw4
oracle:oinstall /dev/raw/raw5
Thanks

Similar Messages

CRS-0213 error during 10g RAC installation

The two nodes are 2 Sun machines. The Oracle CRS installation went smoothly without incidents. I then kicked in the 10g DB RAC installation. At the end of the installation, I got error. I took a snapshot here:
http://bostonfx.com/temp/ora10g.gif
Any advise is much appreciated,
Lucas

Hi Lucas -
This sounds simliar to Bug 3584146 PRKR-1008 adding instance to CRS via SRVCTL. The published workaround follows:
The workaround is to give permissions on the vip resources for all oracle users on the machine.
crs_setperm ora.<nodename>.vip -u user:<orauser1>:rwx
crs_setperm ora.<nodename>.vip -u user:<orauser2>:rwx
Repeat this for all oracle users on the system.
Hope this helps
-shawn

Quick 10g RAC Installation guide for Solaris

I am looking for quick/step by step guide/article for 10g RAC installation for Solaris

Hi, also you can get more information about the install process into Oracle documentation, please review the next link, there you found extensive information about this process.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/toc.htm
Good luck
Regards,

10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Oracle 10g RAC installation on linux server.

HI,
Can anybody help me that to give some answers of my question's ?
can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
if i can then plz tell me this how can i do this.
i am new in linux server just wanted to learn that how to install oracle 10g RAC.
thanks & Regards to all of my seniors..

The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

Root.sh failure on node1 during Grid Infra installation

I’m installing 11.2.0.3 Grid Infrastructure on two AIX 7.1 nodes. Root.sh script fails at ora.cssd startup. I’m using manual network configuration with DNS and hosts file. Cluvfy output looks good but root.sh fails. Any ideas?

Cluvfy output indicates overall passed minus some ignorable errors. Also, I verified interconnect and asm disks and they appear all good. I have some concernes about these (bellow), should I worry about them at this stage?
Network parameter - ipqmaxlen - Checks if the network parameter is set correctly on the system
Check Failed on Nodes: [donner02, donner01]
Verification result of failed node: donner02
Expected Value
: 512
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "ipqmaxlen" for interface "en1" is not configured to the expected value on node "donner02".[Expected="512"; Found="en1="] - Cause: - Action:
Back to Top
Verification result of failed node: donner01
Expected Value
: 512
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "ipqmaxlen" for interface "en1" is not configured to the expected value on node "donner01".[Expected="512"; Found="en1="] - Cause: - Action:
Network parameter - sb_max - Checks if the network parameter is set correctly on the system
Check Failed on Nodes: [donner02, donner01]
Verification result of failed node: donner02
Expected Value
: 4194304
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "sb_max" for interface "en1" is not configured to the expected value on node "donner02".[Expected="4194304"; Found="en1="] - Cause: - Action:
Back to Top
Verification result of failed node: donner01
Expected Value
: 4194304
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "sb_max" for interface "en1" is not configured to the expected value on node "donner01".[Expected="4194304"; Found="en1="] - Cause: - Action:
Network parameter - tcp_sendspace - Checks if the network parameter is set correctly on the system
Check Failed on Nodes: [donner02, donner01]
Verification result of failed node: donner02
Expected Value
: 65536
Actual Value
: en1=131072
Details:
PRVE-0273 : The value of network parameter "tcp_sendspace" for interface "en1" is not configured to the expected value on node "donner02".[Expected="65536"; Found="en1=131072"] - Cause: - Action:
Back to Top
Verification result of failed node: donner01
Expected Value
: 65536
Actual Value
: en1=131072
Details:
PRVE-0273 : The value of network parameter "tcp_sendspace" for interface "en1" is not configured to the expected value on node "donner01".[Expected="65536"; Found="en1=131072"] - Cause: - Action:
Network parameter - udp_sendspace - Checks if the network parameter is set correctly on the system
Check Failed on Nodes: [donner02, donner01]
Verification result of failed node: donner02
Expected Value
: 65536
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "udp_sendspace" for interface "en1" is not configured to the expected value on node "donner02".[Expected="65536"; Found="en1="] - Cause: - Action:
Back to Top
Verification result of failed node: donner01
Expected Value
: 65536
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "udp_sendspace" for interface "en1" is not configured to the expected value on node "donner01".[Expected="65536"; Found="en1="] - Cause: - Action:
Network parameter - udp_recvspace - Checks if the network parameter is set correctly on the system
Check Failed on Nodes: [donner02, donner01]
Verification result of failed node: donner02
Expected Value
: 655360
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "udp_recvspace" for interface "en1" is not configured to the expected value on node "donner02".[Expected="655360"; Found="en1="] - Cause: - Action:
Back to Top
Verification result of failed node: donner01
Expected Value
: 655360
Actual Value
: en1=
Details:
PRVE-0273 : The value of network parameter "udp_recvspace" for interface "en1" is not configured to the expected value on node "donner01".[Expected="655360"; Found="en1="] - Cause: - Action:

Oracle 11GR2 rac installation in vmware

Hi all experts,
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , i get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure
-bash: /etc/init.d/oracleasm: No such file or directory
I would appreciate if some one can help me out with this.

You have not installed the required RPMs, in order to configure ASM. You can find them below. You can follow this step by step guide on how to configure ASM Eriglen Gani's Blog: Step By Step: Configuring Automatic Storage Management (ASM) on Standalone Server with Oracle Enter…
oracleasm-2.6.18-194.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-194.el5xen-2.0.5-1.el5
oracleasm-2.6.18-194.el5PAE-2.0.5-1.el5
oracleasm-2.6.18-194.el5debug-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5

Oracle rac installation in vmware workstation?

iam very eager to learn the oracle rac, for that in my pc i created the 2 virtual machines in vmware workstation and installed redhat linux AS3.0 o.s.
i need a steps to install the oracle 9i rac in these vmware enviornment....

See my articles at http://www.dbasupport.com

Root.sh failed on node2

here is my root.sh output on node1, it was successful.
[root@rac1 ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-21 21:24:03: Parsing the host name
2011-01-21 21:24:03: Checking for super user privileges
2011-01-21 21:24:03: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 68df83b7f2764fb5bf99934ce7b9d0b8.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 68df83b7f2764fb5bf99934ce7b9d0b8 (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac1'
CRS-2677: Stop of 'ora.crsd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac1'
CRS-2677: Stop of 'ora.asm' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac1'
CRS-2677: Stop of 'ora.ctssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac1'
CRS-2677: Stop of 'ora.cssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac1'
CRS-2677: Stop of 'ora.gpnpd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac1'
CRS-2677: Stop of 'ora.gipcd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac1'
CRS-2677: Stop of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac1'
CRS-2676: Start of 'ora.evmd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac1'
CRS-2676: Start of 'ora.DATA.dg' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.registry.acfs' on 'rac1'
CRS-2676: Start of 'ora.registry.acfs' on 'rac1' succeeded
rac1 2011/01/21 22:08:18 /u01/app/11.2.0/grid/cdata/rac1/backup_20110121_220818.olr
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 4031 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac1 ~]#

and this is my output to root.sh on node2, it failed.
where do I look for possible problem?
my runcluvfy before installation ran successfully and passed
[root@rac2 ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-22 01:04:41: Parsing the host name
2011-01-22 01:04:41: Checking for super user privileges
2011-01-22 01:04:41: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_p arams
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'rac2'
CRS-2676: Start of 'ora.drivers.acfs' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac2'
CRS-2676: Start of 'ora.evmd' on 'rac2' succeeded
Timed out waiting for the CRS stack to start.
[root@rac2 ~]#

Root.sh fails inf 11gr2 2 node hp installation

Hello,
Env Details:
This is an 2node RAC 11gR2 installation on HP 11.3.
Following is the issue:
The GRid infrastructure installation fails at the point of running root.sh with the following errors on node 1,
CRS-2677: Stop of 'ora.cssdmonitor' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'vpar1'
CRS-2677: Stop of 'ora.gpnpd' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'vpar1'
CRS-2677: Stop of 'ora.mdnsd' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'vpar1'
CRS-2677: Stop of 'ora.gipcd' on 'vpar1' succeeded
CRS-4000: Command Start failed, or completed with errors.
CRS-2672: Attempting to start 'ora.gipcd' on 'vpar1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'vpar1'
CRS-2676: Start of 'ora.gipcd' on 'vpar1' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'vpar1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'vpar1'
CRS-2676: Start of 'ora.gpnpd' on 'vpar1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vpar1'
CRS-2676: Start of 'ora.cssdmonitor' on 'vpar1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'vpar1'
CRS-2672: Attempting to start 'ora.diskmon' on 'vpar1'
CRS-2676: Start of 'ora.diskmon' on 'vpar1' succeeded
CRS-2674: Start of 'ora.cssd' on 'vpar1' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'vpar1'
CRS-2678: 'ora.cssd' on 'vpar1' has experienced an unrecoverable failure
CRS-0267: Human intervention required to resume its availability.
CRS-2673: Attempting to stop 'ora.diskmon' on 'vpar1'
CRS-2677: Stop of 'ora.diskmon' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'vpar1'
CRS-2677: Stop of 'ora.gpnpd' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'vpar1'
CRS-2677: Stop of 'ora.mdnsd' on 'vpar1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'vpar1'
CRS-2677: Stop of 'ora.gipcd' on 'vpar1' succeeded
*CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /orabinary1/cluster/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /orabinary1/cluster/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /orabinary1/cluster/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM*
CRS-2679: Attempting to clean 'ora.cssd' on 'vpar1'
CRS-2681: Clean of 'ora.cssd' on 'vpar1' succeeded
Initial cluster configuration failed.
the ocrcheck command fails with :
2010-02-25 14:57:08.610: [ OCRASM][1]proprasmo: Failed to open file in dirty mode
2010-02-25 14:57:08.610: [ OCRASM][1]proprasmo: Error in open/create file in dg [newgrid]
[ OCRASM][1]SLOS : SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
AMDU-00210: No disks found in diskgroup NEWGRID
AMDU-00210: No disks found in diskgroup NEWGRID
2010-02-25 14:57:08.630: [ OCRASM][1]proprasmo: kgfoCheckMount returned [7]
2010-02-25 14:57:08.630: [ OCRASM][1]proprasmo: The ASM instance is down
the disks are already owned by grid:asmadmin group i have already done chmod 660 for all of them.
the precheck during the installation does not fail with any particular error and goes ahead to the point of asking to run root.sh
kindly help.
regards
pg

Unfortunately I can't run any -post checks because the CRS doesn't install correctly. The error occurs during the intial root.sh run on the first node, and doens't allow me to continue.
cluvfy stage -post crsinst -n sun277z1,sun278z1
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "sun277z1"
Checking user equivalence...
User equivalence check passed for user "oracle"
ERROR:
CRS is not installed on any of the nodes
Verification cannot proceed

Oracle 10g RAC on 2 VMware Windows 2003 images corrupts image

It happened twice on each of the 2 VMware workstation 5 on which I am trying to set up an Oracle 10g R2 RAC. After installing CRS and rebooting machine I lost access to the Network Connections and the Disk Management. Basically I have to create a new image. Before I start a third time I would appreciate advice or feedback from other users.
Also Configuration Assistants failed to install.
Thanks

Check out my articles at http://dbasupport.com on 10g R2 RAC Clusterware setup. I was able to do that on my vmware BUT I hope to have the very irritating ASM scenario done before my 4th Article.
Check it out.

HTTP Server fails to starts during E-Business installation

Hello All,
I am having issues installing e-business suite 12.1.1 on Oracle Linux 6.2.
I have applied all the correct packages (and a couple that were not listed in the installation instructions), applied required patches, upgraded the startCD version to the latest, run the md5sum checks on the Stage directory, and a bunch of manual stuff which it doesn't tell you to do in the installation notes, but you have to do to make it work, e.g. linking unzip 5.x from the startCD to /usr/bin/unzip. I thought that I had it cracked until it failed at the last HTTP Server checks.
I have attempted to restart services manually but it appears as though the HTTP server cannot start due to a missing library libdb-4.3.so:
HTTP_Server~1.log
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
There was another post where a similar issue was resolved in a OEL 5 x86.x64 install by applying a i383 gdbm package, and linking the existing library as the document id which you posted suggested.
This package cannot be applied, as I have attempted.
I then started to look for the library which is reported in the logs as being missing, i.e. libdb-4.3.so. This does not appear to exist for OEL 6.
I then looked further afield and found a Centos 6.2 rpm which contained this library. I extracted this and linked it to the libdb.so.2 (patch 6078836).
I am getting the following from the adstrtal.log (I ran the cat command as root not adstrtal.sh which I ran as the application user):
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep Failed*
Web Application Services OACORE OC4J Instance <SID>_<HOST> adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance <SID>_<HOST> adformsctl.sh Failed
Web Application Services OAFM OC4J Instance <SID>_<HOST> adoafmctl.sh Failed
This is different to what I was seeing previously where all a 4 Web Application Services had failed
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep -v "status 0" | grep status*
adoacorectl.sh: exiting with status 150
adformsctl.sh: exiting with status 150
adoafmctl.sh: exiting with status 150
ServiceControl is exiting with status 3
Looking at the respective log files I am seeing the following:
adoacorectl.txt
*06/27/12-07:35:10 :: adoacorectl.sh version 120.13*
*06/27/12-07:35:10 :: adoacorectl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:10 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:10 :: adoacorectl.sh: exiting with status 150*
*================================================================================*
adformsctl.txt
*06/27/12-07:35:11 :: adformsctl.sh version 120.16*
*06/27/12-07:35:11 :: adformsctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adformsctl.sh: exiting with status 150*
*================================================================================*
adoafmctl.txt
*06/27/12-07:35:11 :: adoafmctl.sh version 120.8*
*06/27/12-07:35:11 :: adoafmctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adoafmctl.sh: exiting with status 150*
*================================================================================*
Running adapcctl.sh by itself I am seeing the same issue reported in the log files:
*$ ./inst/apps/<SID>_<HOST>/admin/scripts/adapcctl.sh start*
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adapcctl.txt for more information
Looking at the log file I can see the following:
*06/27/12-08:15:27 :: adapcctl.sh version 120.7.12010000.2*
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN managed OHS instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-08:15:27 :: adapcctl.sh: exiting with status 0*
*================================================================================*
I have attempted to restart opmn using adopmnctl.sh, which was unsuccessful. Looking at the HTTP_Server~1.log I can see the following the error:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
Has been replaced by the recurring message:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
Syntax error on line 264 of /u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/conf/httpd.conf:
Cannot load /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so into server: /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so: undefined symbol: dbm_firstkey
Looking at line 264 of httpd.conf I can see the following:
LoadModule ossl_module libexec/mod_ossl.so
Which looks fine when compared to the rest of the file.
I am not able to look at the /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so.
I do not know where else to go with this now. Any guidance which you could provide would be very much appreciated.
Regards,

Hello Hussein,
Thank you for getting back to me! As per the installation instructions it states the following:
# cd /usr/lib
# ln -s libdb-4.7.so libdb-4.3.so
However there is no libdb-4.7.so library there to link to.
I have installed the db4 i686 & x86_64 packages which contain this library, then performed the above. I then ran the adstrtal.sh command which completed without incident.
As such the Required Packages in the installation instructions should be updated to include the following:
db4.i686
db4-devel.i686
db4.x86_64
db4-devel.x86_64
Regards,

Oracle 10g rac install on vmware with server 2003 error

INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac2 rac2-priv rac2
node 2: rac1 rac1-priv rac1
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk1
Format of 1 voting devices complete.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
rac2 service OracleCSService in improper STOPPED state, err(0)
rac1 service OracleCSService in improper PENDING state, err(997)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.

Pl post in the RAC install forum - RAC, ASM & Clusterware Installation
HTH
Srini

Root.sh failing at node2 during 10g rac installation on vmware

Similar Messages

Maybe you are looking for