Row Formulas and templates

<p>I have a report template where I have selected multiple items inone data row. I would then like to find the sum of the datarow. I created the data row and then added a formula to thenext row on the report. The formula for the row is entered inthe first column on the report. The formula is"Sum(Row[1])". when the template is added to thereport with multiple columns the formula only appears in the firstcolumn. If I immediately try to save the rows on the currentdesign to a new template it presents an error saying that thesystem can't save the rows as a template be cause there is a"Cell Reference" but when I first saved the rows to atemplate there was no issue displayed regarding the "CellReferences". What am I doing wrong? Can I use thismethod of summarizing a group of items using a row formula?</p><p> </p><p>Any help would be greatly appreciated.</p><p> </p><p>Thanks,</p><p>Duane</p>

Hi
I am trying to achieve a similar scenario
For example - I have an order with 2 line items.
Line 1 xxxx qty 2
Line 2 xx3 qyt 3.
When it prints the lables I want it based on the qty - so for line 1 I want 2 labels and line 2 3 labels.
Does anyone know how to acheive this so it repeats the label based on the qty
Kind regards

Similar Messages

Error opening a Manage Report template with Formulas and Summation

Hi Expert,
My j2ee web application is setup is such a way that when there is NO connectivity to the Crystal Report Server XI, it will use the Crystal Report for Eclipse functionality and opening report templates located in the relative path - This works fine.
But when there is a connectivity to the CMS Server, I have this error when opening a manage report in Crystal Report Server XI that contains formulas and summations. But for other reports like chart and listings no problem.
This code triggers the error:
ReportClientDocument clientDoc = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
I found out there's a conflict between CR libraries for Eclipse and libraries for RAS Enterprise Server XI.
How can I solve this issue so that I can support the two scenarios - with or without CMS connectivity, I can still view reports.
Error Stack Trace:
com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed detail:Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. The exception originally thrown was com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
Hoping for your answers.
Regards,
Rulix Batistil

You must isolate the CR4E and RAS SDK jars using separate classloaders - simplest is have separate apps, if rolling your own class loaders is out of project scope.
They do not work together.
Sincerely,
Ted Ueda

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

click and hold on one cell, then drag to select the range, then release, then type the delete key. Only inlude cells in the range you do not want to keey the contents of the cell. You can remove one-off cells by holding the command key and clicking cells to add or remove as needed.
You can download the Numbers users guide here:
http://support.apple.com/manuals/#productivitysoftware

ASO MDX member formula and performance

Hi,
I am doing some testing about MDX formulas and performance. I found a performance issue but I can not understand why is taking so long time a report.
The situation is:
I create a report or a MDX query with:
6 dimensions in row and 1 dimension in column
rows:
Period - Filtered using a member
Year - Filtered using a member
Relationship Manager - Filtered using a member
Report Type - Filtered using a member
Local Relationship Manager - 4400 members level 0
Global Relationship Manager - 10400 members level 0
Column:
Account dimension, only a member
The member selected for Report Type (RM.Local) has a formula
My Report Type dimension has 10 members, there is one member where I store data called : RM.Input
My first test was
RM.Local his formula is [RM.Input] , the report is run in 1 second
RM.Local his formula is ([RM.Input],[MTD]) where MTD is a member level 0 store in my view dimension. The report run in 20 minutes. I was not expecting so bad performance when I only pointing at [RM.Input],[MTD]
Do you consider this time is reasonable when I am using this formula?
The mdx report is:
With
set [_Local Relationship Manager3] as 'Descendants([All Local Relationship Managers], 2)' = level 0 members
set [_Global Relationship Manager4] as '[Global Relationship Manager].Generations(4).members' = level 0 members
set [_Period0] as '{[Period].[Oct]}'
set [_Relationship Manager4] as '{[Relationship Manager].[Dummy1)]}'
set [_Report Type0] as '{[Report Type].[RM.Local]}'
set [_Year2] as '{[Year].[FY-2013]}'
select
{ [Account].[Expenses]
} on columns,
NON EMPTY {crossjoin({[_Local Relationship Manager3]},crossjoin({[_Global Relationship Manager4]},crossjoin({[_Period0]},crossjoin({[_Relationship Manager4]},crossjoin({[_Report Type0]},{[_Year2]})))))} properties MEMBER_NAME, GEN_NUMBER, [Global Relationship Manager].[MEMBER_UNIQUE_NAME], [Global Relationship Manager].[Memnor], [Local Relationship Manager].[MEMBER_UNIQUE_NAME], [Local Relationship Manager].[Memnor], [Relationship Manager].[MEMBER_UNIQUE_NAME], [Relationship Manager].[Memnor], [Period].[Default], [Report Type].[Default], [Year].[MEMBER_UNIQUE_NAME], [Year].[Memnor] on rows
from [DICISRM.DICISRM]

Ok Try this one
But here you have to change the MDX formula every month.
Year
--FY2009
--FY2010
--FY2011
--FY2012
Period
--TotalYear
----Qtr1
-------Jan
-------Feb
-------Mar
Let say if you're CurrentYear is FY2011 and you're Current Month is March then you're MDX will be
case when contains([Year].CurrentMember,MemberRange([FY2009],[FY2010])) and contains([Period].CurrentMember,MemberRange([Jan],[Feb]))
Then
B
else
C
end
For the Next month you just have to make a change in the MemberRange I.e.,(Replace Feb with Mar)
*case when contains([Year].CurrentMember,MemberRange([FY2009],[FY2010])) and contains([Period].CurrentMember,MemberRange([Jan],[Mar]))*
Then
B
else
C
end
I tested it and Its working fine.
I think this will solve you're problem but there might be a more elegant solution out there.
Regards,
RSG

Extra row in input template in BPS

hI EXPERTS
Our business is shared by our company(referred to as 'internal') and some partners(referred to as External). we use web template reporting..so all web reports we have show data on internal and external business.So even in planning reports we have internal planning and external planning.
we have one strange problem in one planning scenario.Until June this year,we had same Target value for both internal and external..so our user used to input one figure in one Input template which inturn will be showed as Target value in both Internal reports and External reports....we are using static webtemplate based reports...
for e.g Sales Target -
10 million (in input template)
but from July,its different target value for internal and external....so my user is giving first Internal figure in Sales Target column in Input template and generating static report for Internal users and then going back to Input template and giving 'external' figure in same Sales Target row in input template and generating static reports for External....so he is doing it two times every month....
he wants to avoid this....he suggested something like have one row for 'Internal Sales Target' and one row for 'External Sales Target' in input template....so he can input different figures in one go and generate reports in one go....
How can I achieve this?I am new to BPS....where do I need to do changes and what care I need to take while doing this...
Thanks alot for your advice..........
Rgds.

Hello polintram,
there are many, many options to solve the issue and it will depend on your data model, the konfiguration of your reports, and so on..
if i understand your example, in your cutrent planning application it´s not possible to save the values permanent. you loose the internal value by overwriting with the external value, because you use the same keyfigure-datamodel!? mhhh... the diffrent values are only stored in the generated reports!?
possible solutions:
1. two diffrent keyfigures - one for internal, one for external - there you will have one row and two columns
2. diffrent character-combinations/ one keyfigure - that means you split your characterdefinition (for example with an infoobject which discrebed the "internal" "external" status)
i think it shouldn´t be a big problem, but it depends on your datamodel and planning layout...
BR david

Use of table and template in Smartform

Hi,
I need an output in the smartform as shown below in the form of a table. I have tried doing this only with the use of template(create->Template) but I am not able to print the heading using text elements one after another. Only the first cell is getting populated with the heading.
I assume this can be accomplished with a template as well as a table.
Can anyone please let me know how this can be done?
Any help would be appreciated.
heading 1          <data>
heading2           <data>
heading3           <data>
Thanks
SR

template is 4 , when u know , how many rows u want , u can use.
If u dnt know then use Table .
Now when u creat text element u have to assign row number ,
and colomn number .
for that click on text element go to ouput option.
then only it will display in perticular row/col.
if u didnt assign , default it will come in 1st row nd col.

PWA 2010 timesheet: 2 different colors for the rows "Actual " and "Planned

Hello,
To make timesheet easier to read and fill, is it possible to have 2 different colors for the rows “Actual “ and “Planned”?
Thanks,
soudha

Hello Soudha,
By default the timesheet grid shows the cells in white color. But if you have little coding skills or a developer at your end, you can try this using "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\JsGrid.js" java
script file.
You may have to modify it but I recommend to take a backup of the file and test in your test environment first.
Happy troubleshooting.....
Vikram Daruru - MSFT

Print Row Numbers and Column Letters

How do you tell Numbers to print the Row numbers and Column letters? This was very simple in Appleworks (print dialog box had that option). Can't find it in Numbers though.

Here is a script doing all the job for us.
Just select one or several cells in a table and run the script.
It duplicates it, add an header row, an header column, insert the needed labels and fill the other cells with a formula grabbing the contents of the original table.
--[SCRIPT build a table with headers]
Enregistrer len tant que Script: build a table with headers.scpt
déplacer le fichier créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Selectionner une cellule dans la table à dupliquer
menu Scripts > Numbers > build a table with headers
Le script duplique la table et crée des en-têtes de lignes et colonnes.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as Script: build a table with headers.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a range of cells in the table to 'duplicate'
menu Scripts > Numbers > build a table with headers
The script duplicate the table and inserts columns/rows headers.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (VALLAURIS, France)
2009/09/19
--=====
property theApp : "Numbers"
--=====
my activateGUIscripting() (* to be sure than GUI scripting will be active *)
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set new_Table to t_Name & "_#"
my duplicateTable(s_Name, t_Name, new_Table)
set delim to my getLocalizedDelimiter()
(* grab localized function names and add an open parenthesis at end *)
set IF_loc to my getLocalizedFunctionName("Numbers", "IF") & "("
set CHAR_loc to my getLocalizedFunctionName("Numbers", "CHAR") & "("
set INT_loc to my getLocalizedFunctionName("Numbers", "INT") & "("
set MOD_loc to my getLocalizedFunctionName("Numbers", "MOD") & "("
set INDIRECT_loc to my getLocalizedFunctionName("Numbers", "INDIRECT") & "("
set ADDRESS_loc to my getLocalizedFunctionName("Numbers", "ADDRESS") & "("
(* grab localized function names and add a couple of parenthesis at end *)
set ROW_loc to my getLocalizedFunctionName("Numbers", "ROW") & "()"
set COLUMN_loc to my getLocalizedFunctionName("Numbers", "COLUMN") & "()"
tell application "Numbers" to tell document d_Name to tell sheet s_Name to tell table new_Table
if column count = 256 then
if my parleAnglais() then
error "Oops, already 256 columns !"
else
error "Désolé, il y a déjà 256 colonnes !"
end if
end if
if row count = 65536 then
if my parleAnglais() then
error "Oops, already 65536 rows !"
else
error "Désolé, il y a déjà 65536 lignes !"
end if
end if
try
add row above row 1
on error
if my parleAnglais() then
error "Oops, already five header row !"
else
error "Désolé, il y a déjà cinq rangs d’en tête !"
end if
end try
try
add column before column 1
on error
if my parleAnglais() then
error "Oops, already five header columns !"
else
error "Désolé, il y a déjà cinq rangs d’en tête !"
end if
end try
set nbr to row count
set nbc to column count
(* =IF(COLUMN()<28,CHAR(COLUMN()63),CHAR(INT((COLUMN()-2)/26)+64)&CHAR(MOD(COLUMN()-2,26)65)) *)
set theFormula to "=" & IF_loc & COLUMN_loc & "<28" & delim & CHAR_loc & COLUMN_loc & "+63)" & delim & CHAR_loc & INT_loc & "(" & COLUMN_loc & "-2)/26)+64)&" & CHAR_loc & MOD_loc & COLUMN_loc & "-2" & delim & "26)+65))"
tell row 1
repeat with c from 2 to nbc
set value of cell c to theFormula
end repeat
end tell -- row 1
(* =ROW()-1 *)
set theFormula to "=" & ROW_loc & "-1"
tell column 1
repeat with r from 2 to nbr
set value of cell r to theFormula
end repeat
end tell -- column 1
(* =INDIRECT(ADDRESS(ROW()-1,COLUMN()-1,,,"Tableau 2")) *)
set theFormula to "=" & INDIRECT_loc & ADDRESS_loc & ROW_loc & "-1" & delim & COLUMN_loc & "-1" & delim & delim & delim & quote & t_Name & quote & "))"
repeat with r from 2 to nbr
repeat with c from 2 to nbc
set value of cell r of column c to theFormula
end repeat -- with c
end repeat -- with r
end tell -- Numbers
--=====
Set the parameter delimiter which must be used in Numbers formulas
on getLocalizedDelimiter()
if character 2 of (0.5 as text) is "." then
return ","
else
return ";"
end if
end getLocalizedDelimiter
--=====
on getLocalizedFunctionName(theApp, x)
local p2bndl
set p2bndl to (path to application support as text) & "iWork '09:Frameworks:SFTabular.framework:Versions:A:Resources:"
return my getLocalizedName(theApp, x, p2bndl)
end getLocalizedFunctionName
--=====
on getLocalizedName(a, x, f)
tell application a to return localized string x from table "Localizable" in bundle file f
end getLocalizedName
--=====
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on isItAsheet(s)
try
tell application "Numbers" to tell document 1
count of tables of sheet s (*
Post an error if s is not a sheet *)
end tell
return true
on error
return false
end try
end isItAsheet
--=====
on activateGUIscripting()
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true (* to be sure than GUI scripting will be active *)
end tell
end activateGUIscripting
--=====
on duplicateTable(sourceSheet, sourceTable, newName)
local lesFeuilles, lesTables1, found, listOfRows, cor, i, isSourceSheet, nameI, j, lesTables2
tell application "Numbers"
activate
tell document 1
set lesFeuilles to name of sheets
if sourceSheet is in lesFeuilles then
tell sheet sourceSheet to set lesTables1 to name of tables
if sourceTable is not in lesTables1 then
if my parleAnglais() then
error "The sheet “" & sourceTable & "” of sheet “" & sourceSheet & "” is unavailable ! "
else
error "La table “" & sourceTable & "” de la feuille “" & sourceSheet & "” n'existe pas ! "
end if
end if -- sourceTable is not
else
if my parleAnglais() then
error "The sheet “" & sourceSheet & "” is unavailable ! "
else
error "La feuille “" & sourceSheet & "” n'existe pas ! "
end if
end if -- sourceSheet is in
end tell -- document
end tell -- application
if newName is not in lesTables1 then (*
Now, an ugly workaround to duplicate the sheet *)
set isOS4 to (system attribute "sys2") < 5
tell application "System Events" to tell application process "Numbers"
set docWindow to false (* CAUTION, an inspector ("AXFloatingWindow") or a Find/Search ("AXDialog") window may be open *)
repeat with i from 1 to (count of windows)
if subrole of window i is "AXStandardWindow" then
set docWindow to i (* got the document's window *)
exit repeat
end if
end repeat
if docWindow is not false then
tell outline 1 of scroll area 1 of splitter group 1 of splitter group 1 of window docWindow
select row 1
set value of attribute "AXFocused" to true
set found to false
set listOfRows to name of static text of every row
set cor to count of rows (* equal count of listOfRows *)
if isOS4 then (*
for mac Os X 10.4.11
CAUTION, listOfRows it's a list of lists !
{{"Feuille 2"}, {"Tableau 1"}, {"theSheet"}, {"Feuille 1"}, {"Tableau 2"}, {"Clément"}, {"Feuille 4"}} *)
repeat with i from 1 to cor (*
Scan the thumbnails *)
set nameI to item 1 of item i of listOfRows
set isSourceSheet to (sourceSheet = nameI) and my isItAsheet(nameI)
if isSourceSheet then
select row i
if (i < cor) and not my isItAsheet(item 1 of item (i + 1) of listOfRows) then (*
Here we may scan the thumbnails of tables of sourceSheet *)
repeat with j from i + 1 to i + (count of lesTables1)
if sourceTable = item 1 of item j of listOfRows then
select row j
set found to true
exit repeat
end if -- sourceTable
end repeat
else
if my parleAnglais() then
error "The sheet “" & sourceTable & "” of sheet “" & sourceSheet & "”" & return & " is not revealed in thumbnails ! "
else
error "La table “" & sourceTable & "” de la feuille “" & sourceSheet & "”" & return & " n'est pas affichée dans les vignettes ! "
end if -- my parleFrancais
end if -- (i < cor)
end if -- isSourceSheet
if found then exit repeat
end repeat -- i
else (*
for mac Os X 10.5.x
CAUTION, listOfRows is a list of lists !
{{}, {"Tableau 1"}, {"theSheet"}, {}, {"Tableau 2"}, {"Clément"}, {}}
With 10.5.x, the names of sheets are empty *)
repeat with i from 1 to cor
set isSourceSheet to (class of UI element 1 of row i is group) and (get value of static text 1 of group 1 of row i) is sourceSheet
if isSourceSheet then (*
Here we may scan the thumbnails of tables of sourceSheet *)
if value of UI element 1 of group 1 of row i is 0 then (*
reveal the tables's thumbnails and adjust the list accordingly *)
click UI element 1 of group 1 of row i (* click the black triangle to reveal tables *)
delay 0.1
set listOfRows to name of static text of every row (* update the list accordingly *)
end if -- value of UI…
repeat with j from i + 1 to i + (count of lesTables1)
if sourceTable = item 1 of item j of listOfRows then
select row j
set found to true
exit repeat
end if -- sourcetable
end repeat -- with j
end if -- isSourceSheet
if found then exit repeat
end repeat -- with i
end if -- check OS
end tell -- outline …
keystroke "d" using command down
end if -- docWindow
end tell -- System Events…
if docWindow is not false then (*
Rename the new table according to the passed name: newTable *)
tell application "Numbers" to tell document 1 to tell sheet sourceSheet
set lesTables2 to name of tables
repeat with i in lesTables2
if i is not in lesTables1 then (*
Here i is the name of the newly created table *)
set name of table i to newName
exit repeat
end if
end repeat
end tell
end if -- docWindow
end if -- newName is not…
end duplicateTable
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) samedi 19 septembre 2009 17:33:59

Use one row as a template for new ones

I'm one of those people abusing a spreadsheet as a database, so except for the header all my rows have the same formatting and formulas.
Unfortunately the only way to add a row like this is copying one and adjusting it. This means I can't have hidden columns. An alternative would be keeping a row with default values around, but I sort and filter a lot so it'd be hard to find. Maybe in another table.
Anyway, the Number manual says "If all the body cells in a column above the new row contain the same formula or cell control, the formula or cell control is repeated in the new row."
Could anyone get this to work? For me it repeats formatting but not controls like steppers, and no formulas.
PS yes, I've looked at Bento

lachla wrote:
I'm one of those people abusing a spreadsheet as a database, so except for the header all my rows have the same formatting and formulas.
Lachla,
First, yes, this feature does work. I suppose that it's possible that while you think your table is built according the the requirements, it may not be. Are you sure that your headers are actually in a Numbers "Header Row"? And, are you sure that all your Body rows are identical, allowing of course for relative addressing?
I'm suspicious because you say:
Unfortunately the only way to add a row like this is copying one and adjusting it.
There should be no adjustment necessary if the rows are identical. Adjustment for relative addressing would be automatic after a Copy/Paste.
Jerry

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

Print Empty rows in a Template

Hi All,
my requirement is to create a template for payslip, which contains earnings, deductions & Net Amount.
If an employee has 10 earnings and 6 deductions and another employee has 3 earnings and 2 deductions then the Template is differ's based on the data.
For both the employees, the template should look same, so by inserting empty rows, i think it is solved...
How to insert Empty Rows in the Template?
Did anyone get this working and knows what I am doing wrong?
Regards,
Dilip

I think the query is not returning all the data desired.
You need a zero value for each deduction/earning per employee in the query results.
To get the query to give all the necessary zeros I would do a union that is simply all the employees returned in the first part of the query matched up with the table(s) that have all the deduction and earnings fields.
Of course the amount of the earnings or deductions would simply be an expression - zero.
Then when the data is run against the xmlp template, it would have to sum the values.
This would make all the reports come out the same.
The way to think about the the xmlp template is that it does a loop/filter through your data.
If your loop is on employee - it is only going to return the rows with that employee.
If that employee does not have a certain deduction then it will not show up.
If your loop is on deduction or earnings - it is only going to return the rows with that employee.
Now if you have a fixed list of deductions/earnings then you can code this into the xmlp template - tedious, but it will work.
If your deductions/earnings ever change, you will have to perform maintenance on the report.

Table and template in smartforms

what r the diff.s between TABLE AND TEMPLATE in smartforms..
ALso.. the diff. between LOOP and TABLE.. in smartforms..

Hi,
Template :
1. No of rows & coloumns are fixed.
2. u can directly mention, which data has to be fill in which row & coloumn.
3. Templates are used, where u r having static no of data.
( ex : Name, rollno, age, ***)
4. No header & footer
Table :
1. No of cols are fixed, u can have 'n' no of rows.
2. it has header & footer concept
A table is meant to be used to display dynamic number of lines (eg. invoice line items), whereas a template is for fixed number of column and lines (labels).
Please reward points if it helps
Thanks
Vikranth

Diffrence between Table and Template In Smartform

Hi,
Please could u tel me Difference between Table and Template In Smartform

Table exteds dynamically.
Template is fixed in size.
template is Output of a table containing static data
these are the Possible direct successors-All except window, page, table,
and template nodes
Table - Output of a table containing application
data and these are the Possible direct successors-as with template node
Template is used for proper allignment of data which table is used for displaying multiple data.
We can say Template is for static data and Table is for dynamic data.
Suppose we have a requirement in which we have to allign the customer address in such a way as shown below:-
Name- Krishna Company- WIPRO Location- Chennai
Desig- S/W Native - Mumbai
Then for proper allighnment we can create a template and split that into 3 columns and 2 rows and create text elements for each cell display a proper allighned data at the output.
When we include a template inside a loop it gives the same property as a table.
When we have mutiple data which is to be extended to the next page like when we display all employee details in a company we use table.
Table has 3 sections , HEADER, ITEM ,FOOTER
The header secntion will be executed once and it will loop at the item level. at the end footer will be executed.
SmartForms Useful links
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://help.sap.com/saphelp_46c/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
http://www.sap-img.com/smartforms/smart-001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sap-img.com/smartforms/smart-002.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm

What is exact difference between table and template in script

hello all
what is exact difference between table and template in script

Hi there.
Tables alow you to achieve more complex flows with internal tables. You can use different types os lines, like footer, header, line items, and differente types of line items. Also, and most important, you have different processing blocks, again header block (processed before processing of first row), body block (rows) and footer block (after last row or page break).
If you don't need any of this, use a template inside a loop to achieve something like a table. I personaly use templates only to draw lines, for example, before and after a loop, or to align some header in my documents.
A table, is a loop and template mixed to become a very good tool.
Regards.
Valter Oliveira.
Edited by: Valter Oliveira on Jun 5, 2008 5:10 PM

What is the diffrence between Row id and primary key ?

dear all
my question is about creating materialized views parameters (With Rowid and
With Primary kry)
my master table contains a primary key
and i created my materialized view as follow:
CREATE MATERIALIZED VIEW LV_BULLETIN_MV
TABLESPACE USERS
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT
BCODE ID, BTYPE BTYPE_ID,
BDATE THE_DATE,SYMBOL_CODE STOCK_CODE,
BHEAD DESC_E, BHEADARB DESC_A,
BMSG TEXT_E, BMSGARB TEXT_A,
BURL URL, BTIME THE_TIME
FROM BULLETIN@egid_sefit;
I need to know is there a diffrence between using (with row id) and (with primary key) on the performance of the query?

Hi again,
fast refreshing complex views based on rowids, according to the previous subject.
(You're example shows that) are not possible.
Complex remote (replication) snapshots cannot be based on Rowid too.
for 10.1
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_6002.htm#sthref5054
for 10.2
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#sthref6873
So I guess (didn't check it) that this applies ONLY to replication snapshots.
This is not documented clearly though (documentation bug ?!)
Documentation states that the following is generally not possible with Rowid MVIEWS:
Distinct or aggregate functions
GROUP BY or CONNECT BY clauses
Subqueries
Joins
Set operations
Rowid materialized views are not eligible for fast refresh after a master table reorganization until a complete refresh has been performed.
The main purpose of my statements was to try to give a few tips how to avoid common problems with this complex subject, like for example: being able to CREATE an MVIEW with fast refresh clause does not really guarantee that it will refresh fast in the long run (reorganisation, partition changes) if ROWID based, further the rowid mviews have limitations according to the documentation (no group by, no connect by, link see above) plus fast refresh means only to use filter columnns of the mview logs, plus for aggregates you need additional count (*) pseudo columns.
kind regards
Karsten

Row Formulas and templates

Similar Messages

Maybe you are looking for