Rpm packages missing

Hi,
I have try to install oracle 10gR2 in RHEL 5....i have check the packages install in my os....some package thats gnome-libs,xscreensaver and pkdsh were missing.It is must for oracle installation..is yes means how can i download and install...my Linux cd doesnot have these packages....pls help me...
Regards,
S.Mugunthan

For redhat, there is no other way except either to find the packages on the media or to get them from the Red Hat Network(which is paid) . If you are installing it for learning purpose, I would suggest that you use Oracle's Enterprise Linux which has a Public YUM available through which you can download all the packages without any charge paid by you. You can download it from http://edelivery.oracle.com.
HTH
Aman....

Similar Messages

RPM packages missing to install oracle10gR2

Hi all,
I had try to install oracle10gR2 in RHEL5 by using vmware in my laptop.i am new one for oracle installation.After RHEL 5 installation on Vmware i had check the required RPM packages as per the oracle document..but i have not install GNOME-LIBS,XSCREENSAVER,PKDSH rpm packages......pls help me how to install these packages ....these packege are not found in my OS CD...
Regards,
S.Mugunthan.

Hi;
Please check Sergio post
rpm installation
Re: Package install for oracle11gr2
Regard
Helios

OEL-5 finally released but with many desktop packages missing

Hi,
OEL-5 GA has just been released but with many client (desktop) packages missing (as opposed to CENTOS-5 where all RHEL-5 categories are bundled into only one distribution). Namely, three months ago RHEL-5 has been released in three basic categories:
1. Red Hat Enterprise Linux Desktop
2. Red Hat Enterprise Linux
3. Red Hat Enterprise Linux Advanced Platform
The complete souce code for these distributions resides in two Red Hat ftp directories: "5Client" and "5Server" with different contents. It seems that OEL-5 GA includes only packages from "5Server" directory. So, many important applications are missing:
- openoffice.org
- kdepim (kmail, knode etc)
- thunderbird
- fribidi
- gaim
- k3b
etc.
I'm little confused, since it would be very stupid to have to download those packages from CENTOS-5 or self-compiling them from Red Hat source rpm download site.
N.J.

Thanks a lot Wim.
Yes I know, the problem didn't exist in RHEL-4/OEL-4, since AS was superset of ES, WS and Desktop. Unfortunatelly, It's not the case in version 5 where client version includes many packages that are missing in server version and vice versa. To avoid complications with new subscription channels, I would suggest the simplest and the most logical solution: all three categories BUNDLED in single distribution OEL-5 GA and only one subscription channel, just like CENTOS-5 (six CD ISOs).
Regards
N.J.

" Rpm ' package install in solaris 10

hi all,
I want to install rpm package in solaris 10. I already installed rpm-4.1 for solaris. here is the output
bash-3.00#
bash-3.00# /opt/sfw/bin/rpm
RPM version 4.1
Copyright (C) 1998-2002 - Red Hat, Inc.
This program may be freely redistributed under the terms of the GNU GPL
Usage: rpm [-a|--all] [-f|--file] [-g|--group] [-p|--package] [--specfile]
        [--whatrequires] [--whatprovides] [-c|--configfiles] [-d|--docfiles]
        [--dump] [-l|--list] [--queryformat=QUERYFORMAT] [-s|--state]
        [--nomd5] [--nofiles] [--nodeps] [--noscript] [--addsign]
        [-K|--checksig] [--import] [--resign] [--nodigest] [--nosignature]
        [--initdb] [--rebuilddb] [--allfiles] [--allmatches] [--badreloc]
        [-e|--erase <package>+] [--excludedocs] [--excludepath=<path>]
        [--force] [-F|--freshen <packagefile>+] [-h|--hash] [--ignorearch]
        [--ignoreos] [--ignoresize] [-i|--install] [--justdb] [--nodeps]
        [--nomd5] [--noorder] [--nosuggest] [--noscripts] [--notriggers]
        [--oldpackage] [--percent] [--prefix=<dir>] [--relocate=<old>=<new>]
        [--repackage] [--replacefiles] [--replacepkgs] [--test]
        [-U|--upgrade <packagefile>+] [-D|--define 'MACRO EXPR']
        [-E|--eval 'EXPR'] [--macros=<FILE:...>] [--nodigest] [--nosignature]
        [--rcfile=<FILE:...>] [-r|--root ROOT] [--querytags] [--showrc]
        [--quiet] [-v|--verbose] [--version] [-?|--help] [--usage]
        [--scripts] [--setperms] [--setugids] [--conflicts] [--obsoletes]
        [--provides] [--requires] [--info] [--changelog] [--triggers]
        [--last] [--filesbypkg] [--redhatprovides] [--redhatrequires]
        [--buildpolicy=<policy>] [--with=<option>] [--without=<option>]
bash: rpm: command not foundI also update rpm db ,
rpm --initdb.
But same.. Pls help..
Thanks
Partha
pls tell me what

You need to either use the full path - /opt/sfw/bin/rpm or add /opt/sfw/bin/ to the path statement in your profile.
If you are trying to run from the /opt/sfw/bin/ directory then you do the following:
# ./rpm
RPMs are mainly for Linux. I have seen only a couple RPMs for Solaris in the last 15 years and they came from a third-party vendor. What are you trying to install??
regards

Do we need rpm package oracleasmlib for using Oracle ASMLib?

..The Oracle ASMLib kernel driver is now included in the Unbreakable Enterprise Kernel.
No driver package needs to be installed when using this kernel.
The oracleasm-support and oracleasmlib packages still need to be installed from ULN+
http://www.oracle.com/technetwork/topics/linux/asmlib/index-101839.html
i use:
root@oel62 ~]# uname -r
2.6.32-300.3.1.el6uek.x86_64I understood:
-oracleasm: is include in the kernel(kernel/drivers/block/oracleasm/oracleasm.ko)
-oracleasm-support: can be found on the install ISO or in Oracle Public Yum Server.
-oracleasmlib: ? not found in Oracle Public Yum Server! can be found only in ULN?
Question: Do we need it, rpm package oracleasmlib for install Oracle ASMLib?
I have add kernel module oracleasm (via modprobe) and install rpm oracleasm-support
(but without oracleasmlib) and it works !!??
..and I'm confused ???

Dude wrote:
Saying that it works seems quite audacious to me. Well, I can start the engine, let's fly! I'd rather remain on the ground ;-)Hi Dude!
You do not mean I talk nonsense, right?
Maybe! But once again i will protocol here what i did.
It would be very nice if you take a look here:
Ok! Step by step..
My environment: Oracle Linux 6.2 in VMWare
Linux kernel:
[root@oel62 ~]# uname -r
2.6.32-300.3.1.el6uek.x86_64Install oracleasm:
[root@oel62 ~]# modprobe oracleasm
[root@oel62 ~]# modprobe -l oracleasm
kernel/drivers/block/oracleasm/oracleasm.ko
[root@oel62 ~]# lsmod | grep oracle
oracleasm              48482 1 Install oracleasm-support:
root@oel62 ~]# yum install oracleasm-support
Installed:
oracleasm-support.x86_64 0:2.1.5-1.el6
Complete!I have only oracleasm-support(no oracleasmlib!)
[root@oel62 ~]# rpm -qa| grep oracleasm
oracleasm-support-2.1.5-1.el6.x86_64
[root@oel62 ~]# Status:
[root@oel62 ~]# oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: noConfigure:
[root@oel62 ~]# /etc/init.d/oracleasm configure
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmadmin
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver:                     [ OK ]
Scanning the system for Oracle ASMLib disks:               [ OK ]Status again:
root@oel62 ~]# /etc/init.d/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yesI create 2 virtual disks and then create partition on those disks.
Result: /dev/sdg1, /dev/sdh1
and now create ASM disks:
[root@oel62 ~]# oracleasm createdisk asmdisk1 /dev/sdg1
Writing disk header: done
Instantiating disk: done
[root@oel62 ~]# oracleasm createdisk asmdisk2 /dev/sdh1
Writing disk header: done
Instantiating disk: donelistdisks
[root@oel62 ~]# oracleasm listdisks
ASMDISK1
ASMDISK2querydisk
[root@oel62 ~]# oracleasm querydisk -d /dev/sdg1
Device "/dev/sdg1" is marked an ASM disk with the label "ASMDISK1"
[root@oel62 ~]# oracleasm querydisk -d /dev/sdh1
Device "/dev/sdh1" is marked an ASM disk with the label "ASMDISK2"-Create diskgroup TEST_DG:
run asmca, step through all screens, specify "Disk discovery path"
/dev/oracleasm/disks/*Result:
ASMCMD [+] > lsdsk -p -G test_dg
Group_Num Disk_Num      Incarn Mount_Stat Header_Stat Mode_Stat State   Path
        1         0 3915949404 CACHED      MEMBER       ONLINE     NORMAL /dev/oracleasm/disks/ASMDISK1
        1         1 3915949403 CACHED      MEMBER       ONLINE     NORMAL /dev/oracleasm/disks/ASMDISK2-Run dbca create a database testdb with storage using diskgroup TEST_DG
and here is the DB testdb on diskgroup test_dg
[grid@oel62 ~]$ rlwrap asmcmd -p
ASMCMD [+] > ls test_dg/testdb
CONTROLFILE/
DATAFILE/
ONLINELOG/
PARAMETERFILE/
TEMPFILE/
spfiletestdb.ora
ASMCMD [+] > ls -l test_dg/testdb/datafile
Type      Redund Striped Time             Sys Name
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    SYSAUX.257.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    SYSTEM.256.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    UNDOTBS1.258.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    USERS.259.787055133
ASMCMD [+] > Service status:
[grid@oel62 ~]$ srvctl status diskgroup -g test_dg
Disk Group test_dg is running on oel62
[grid@oel62 ~]$ Once again i did not install oracleasmlib!
I have no RPM oracleasmlib on my system:
root@oel62 ~]# rpm -qa| grep oracleasm
oracleasm-support-2.1.5-1.el6.x86_64It is a "perfect" installation, or what do you mean?
It works fine, but why it works??
Well, folks! Tell me now why it works without oracleasmlib ?
What happened, what is going on here?
Thank you for reading my long text here!

Need cvuqdisk rpm package for oracle 10.2.0.1 on IBM PPC..

I need the cvuqdisk rpm package for IBM PPC running Redhat. It is not in the Oracle distro that was downloaded from Oracles site.

You will find almost all the rpm's for any platform from www.rpmfind.net

RPM package issue while installing SOA on Linux - OIM 11gR2 PS1

Hi All,
While installing SOA on linux machine. I am facing issue with kernel properties in Prerequisite section.
So i tried to run rpm package : " libaio-devel-0.3.106-3.2.i386.rpm " on my machine,
through command : rpm - ivh libaio-devel-0.3.106-3.2.i386.rpm
I am getting Error message is :
warning: libaio-devel-0.3.106-3.2.i386.rpm: Header V3 DSA/SHA1 Signature, key ID e8562897: NOKEY
error: Failed dependencies:
libaio.so.1 is needed by libaio-devel-0.3.106-3.2.i386
Please provide some helpful pointer on this
Thanks in advance,
RPB

Hi, Jasdeep!
We have the same problem with OIM 11.1.2 on Solaris SPARC 10 - just after extend WLS domain to OIM & SOA servers AdminServer fails to start with message "syntax error at line 30: `JVM_TYPE=$' unexpected"
It seems like uncompatibility of file $DOMAIN_HOME/bin/setOIMDomainEnv.sh and Solaris systems... :-(
I changed *$DOMAIN_HOME/bin/setOIMDomainEnv.sh* : instead of
PORT_MEM_ARGS="-Xms768m -Xmx1536m -XX:ReservedCodeCacheSize=256m"
JVM_TYPE=$(java -version 2>&1 >/dev/null)
*echo "JVM Type is ${JVM_TYPE}"*
*echo "$JVM_TYPE" | grep -q 'JRockit'*
wrote
*#PORT_MEM_ARGS="-Xms768m -Xmx1536m -XX:ReservedCodeCacheSize=256m"*
*PORT_MEM_ARGS="-Xms768m -Xmx1536m"*
*#JVM_TYPE=$(java -version 2>&1 >/dev/null)*
*JVM_TYPE=JRockit*
*echo "JVM Type is ${JVM_TYPE}"*
*#echo "$JVM_TYPE" | grep -q 'JRockit'*
*echo "$JVM_TYPE" | grep 'JRockit'*
and after that AdminServer started normally.
Try to make similar changes (according your JVM, of course)
Alexander.

During the installation of the rpm package of Oracle 11g XE, Error occur "cpio:digest mismatch"

It is not possible to install the following error occurs.
[root @ localhost Disk1] # rpm -ivh --nodigest oracle-xe-11.2.0-1.0.x86_64.rpm
preparing... ################################# [100%]
Updating / Installing ...
1: oracle-xe-11.2.0-1.0 ################################# [100%]
error : fails to extension of the archive : File /u01/app/oracle/product/11.2.0/xe/bin/oracle;54091d3a: cpio: Digest mismatch
Error: oracle-xe-11.2.0-1.0.x86_64: Installation failed
Error "Digest mismatch" will have occurred from the very beginning,
I tried to specify the installation options "--nodigest".
But Phenomenon does not improve.
I tried to check the version of the rpm package.
It seems the latest version of rpm-4.11.2-2.fc20.x86_64.
Would you have a good workaround?
Installation OS: fedora20 64bit
Installation package: oracle-xe-11.2.0-1.0.x86_64.rpm
メッセージ編集者: user10993108
Has been translated into English.

This is a global forum - you will have to post in English. There are alternate language forums available - Other Languages
Looks like your OS is Fedora - which is not a supported/certified OS for 11g XE - Oracle® Database Express Edition
So things may or may not work as expected.

How to install .rpm packages in Fedora Linux?

Hi all
I am trying to download .rpm packages for my Fedora 10 Linux but don't have a clue on how to install those? First of all, when I download them, they automatically go to my Home directory (that is on my desktop). However, when I login to the Terminal and then login as root...and give this command..
rpm -i <rpm file name>
or
rpm -ivh <rpm file name>
...it says, there is no such file or directory. Now, my question is..how do I get these .rpm files (that are on my computer Home) to the root so that the above command can work and actually installs these?
Please help.
Thank you.

error: Failed dependencies:libc.so.6()(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libdl.so.2()(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
Before you install any new rpms you need to make sure all dependencies are resolved.
try running rrpm -qR binutils-2.15.92.0.2-15.0.0.0.2.x86_64.rpm
and make sure you install all pre-requisites rpm. It seems to me complaining about in-correct version of glibcc..

Installing rpm packages

Hi Guys,
I'm trying to install oracle 11rg2 on my RHEL 5, but I'm having troubles with the rpm packages, I tried to install them but it lacks a lot of dependencies and seem they don't wanna finish! and keep asking for the new dependency package!
does anybody have any collection of all these packages? that I can easily install them? :( it might be a bad question but I really feel out of energy to deal with thee stupid packages! its been few hours !
any helpful reply is really appreciated!
Regards,
Meysam

install this package, it is test environment/learning purpose no need to worry about exact rpm version, below rpms is enough.
else try to download from the link:-http://rpmfind.net/linux/RPM/ or http://rpm.pbone.net/index.php3/stat/11/vendor/642/com/Red%20Hat,%20Inc_.html
# From Enterprise Linux 5 DVD
cd /media/cdrom/Server
rpm -Uvh binutils-2.*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh elfutils-libelf-0.*
rpm -Uvh elfutils-libelf-devel-*
rpm -Uvh gcc-4.*
rpm -Uvh gcc-c++-4.*
rpm -Uvh glibc-2.*
rpm -Uvh glibc-common-2.*
rpm -Uvh glibc-devel-2.*
rpm -Uvh glibc-headers-2.*
rpm -Uvh ksh-2*
rpm -Uvh libXp-*
rpm -Uvh libaio-0.*
rpm -Uvh libaio-devel-0.*
rpm -Uvh libgcc-4.*
rpm -Uvh libstdc++-4.*
rpm -Uvh libstdc++-devel-4.*
rpm -Uvh make-3.*
rpm -Uvh openmotif2*
rpm -Uvh sysstat-7.*
rpm -Uvh unixODBC-2.*
rpm -Uvh unixODBC-devel-2.*after this , you can ignore rpm warnings/error messages to complete the installation(if it is learning/test environment).
Hope, this will help you.

Mandatory RPM packages for EPM components

Hello All,
I am newly working on REDHAT_EL_6_U4_x64
I have to install epm 122 (64 bit) Foundation and Reporting and analysis web applications
For these web applications is any RPM packages are mandatory ?which will prevents from any
fails at the time of installation and configuration
-Can you suggest if any RPM packages requires for web application
Similarly i would like to ask for,
Oracle http web server and weblogic application server
If any rpm packages requires for http and weblogic?
ORACLE client 11g:For installation of oracle client(11g) on redhat is any mandatory
rpm package?
Note: If requires RPM packages for any above please give the list and purpose
of packages
Thanking all of u in advanced..

You are installing on Redhat and you don't know what YUM is > Yellowdog Updater, Modified - Wikipedia, the free encyclopedia
There is a lot of information about it if you search.
Cheers
John
http://john-goodwin.blogspot.com/

Instant Client Package - SDK, RPM package download not working

Hi,
I am trying to download "Instant Client Package - SDK", RPM package for Linux 32 bit, version 11.2.0.1.0 from http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxsoft.html
However the file downloaded has zero length. I tried from two different computers. I cannot find any contact/form to report broken content on that website. Can someone help, please?
Cheers, Tomas

fyi
For me, the page ...
http://www.oracle.com/technology/software/products/database/index.html
... currently says ...
"An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator"
But, with the direct URL to the ZIP, which failed to download before ...
http://download.oracle.com/otn/nt/oracle10g/10201/10201_companion_win32.zip
... I was able to download it just now.
regards
Jan

Build tools language resources - amd64 "packages missing" Installation stuck

I am installing the VS2015 Enterprise RC, the first installation went well, but after the second one, the installation pauses asking, package missing, download from internet or search in this address? I chose the internet one, and the installation has
never advanced ever since, the package that is missing is "build tools language resources - amd64", and it is still acquiring this package.
Tao Wang

Hi ,
Export location provided is not correct , make sure files exist as per requirement.
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not exist.
Regards,

Building Debian / RPM packages in arch

Hello
I recently installed the Arch linux. planning to migrate all my works to arch
I'm working on a program. It should be installed on all major linux distros. So i would like to create debian and rpm packages. I'm looking for a way to avoid installing ubuntu/debian via virtualbox to generate packages.
Is there a way to do that in arch? There is no dpkg in repos of course :-/

karol wrote:
soroush wrote:Ohh! it's not in my pacman -Ss dpkg result
Read https://wiki.archlinux.org/index.php/Ar … Repository
Thank you

Installing .rpm packages onto solaris 10.

Hi,
Can anyone help me by providing the steps to install .rpm package into solaris 10 os?
Thanks

RPM is just a packaging format, and the tools are available on the Solaris Software Companion CD, in the SFWrpm package. You would need to install the package on your system in order to get the RPM tools.
But I think Pascal's point is that the payload is typically Linux binaries, so installing a Linux RPM on Solaris would not be productive. But you could certainly install a source package, for example, or create your own RPM containing Solaris binaries.
-- Alan

Rpm packages missing

Similar Messages

Maybe you are looking for