RRAS - VPN Server and Client have same subnet

Question

Hello,
We have a VPN server setup in RRAS on our 2008 R2 server. The VPN works fine. Clients can connect and get to resources on our server fine. 
The issue is that one client has a subnet of 192.168.1.0/24 and the subnet our server uses is also 192.168.1.0/24.
When the client connects, he can get to resources on our server. However, he needs to be able to get to an IP address of 192.168.1.4 using Remote Desktop that is on his local network. He also needs to get on IP 192.168.1.3 via Remote Desktop on the remote
network. 
Is there a way we can accomplish this without changing subnets? 

Answer 1

For anyone else who needs an answer to this, this is the batch file I created using these links:
http://pastebin.com/HV2GmDAk
http://superuser.com/questions/788924/is-it-possible-to-automatically-run-a-batch-file-as-administrator
Here is the content of it:
REM --add the following to the top of your bat file--
@echo off
:: BatchGotAdmin
REM  --> Check for permissions
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
    echo Requesting administrative privileges...
    goto UACPrompt
) else ( goto gotAdmin )
:UACPrompt
    echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
    set params = %*:"=""
    echo UAC.ShellExecute "cmd.exe", "/c %~s0 %params%", "", "runas", 1 >> "%temp%\getadmin.vbs"
    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
    exit /B
:gotAdmin
    pushd "%CD%"
    CD /D "%~dp0"
rem You need to replace:
rem <VPN> with the Name of the VPN connection you created
rem <USER> with the vpn user
rem <PASS> with the vpn pass
rem @echo off
@echo make sure to be disconnected!
rasdial "Your VPN" /d
@echo start to connect to vpn
rasdial "Your VPN" username password
netsh interface ip show config name="Your VPN" | findstr "IP" > ip.dat
set /p ip= < ip.dat
del ip.dat
set ip=%ip:~-13%
@echo VPN IP is %ip%
@echo Delete 192.168.1.0 route
route delete 192.168.1.0
set target=192.168.1.3
@echo Add route for %target%
route add %target% mask 255.255.255.255 %ip%
timeout /T 3 > nul