RSA3 Extract checker.
Hi,
I am running delta load and repair full request into BW with one hour gap.
I have "X" number of reocrds in setup tables and "Y" number of records in Delta Queu(RSA7), now if i want to check the records then i will execute RSA3, Now can you tell me which records it will show wheather setup tables data for RSA7 data.
Cheers,
Malli
Look at the below options in Updat Mode:
F Transfer of all requested data
D Transfer of the Delta Since the Last Request
I Transfer of an opening balance for non-cumulative values
R Repetition of the transfer of a data packet
C Initialization of the delta transfer
S Simulation of Initialzation of Delta Transfer
Regards,
ARK
Similar Messages
-
RSA3 -(Extract Checker ) Target Sys field -Urgent
Hi
Can any one explain what is the use of this field?
I am running a data source in BW using RSA3 , if I use target system name then it gives X number rows and when target system field is empty it gives Y another number of rows. In my cube there is no field called target system? How does the system determines this field.
Please let me know your thoughts. This is quite urgent.
Thanks
VennelaHi Diego,
Thank you for your reply but I am not able to understand your reply.I am using full load so delta option is not relevant.
my question how does the system determines number of records different when I give target system name .
I dont have field called target system in my cube.
It is effecting me because on the target system we are expecting x number of records but it is sending less.
Please expalin. -
Errors occurred during the extraction in RSA3 - Extractor Checker
Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya -
EXTRACT CHECKER (RSA3) DISPLAY
Hi gurus-
When I use rsa3 to check the extraction and display the records, the column headings are the descriptions. How can I changes these to technical names of the fields. I have few custom fileds and some of those have same name as the previous fields hence I can not distinguish them.
When I try the display of single record, even in there it shows descriptions.
ThanksHi
- When you see the list of records in RSA3, Click on "Current Layout" Button in toolbar (or press CTRL + F8)
- On the left side of pop up window, you will get columns displayed with their position and lenth.
- Here Increase the length for the Fields for which you want to see technical names.
May be you can put length as 20 or 25 for those fields
-Click Copy and you will be able to see technical names in bracket.
Cheers
Prasad -
Hi,
I created a generic DataSource using a function module and i'm testing it using RSA3. I'm trying to extract the records by specifying a range of values for a field in the DataSource , but RSA3 extracts all the records without considering the specified values.
Can anyone please let me what could be the problem and how to extract only the specified range of values in RSA3
Thanks,
AMHello,
In your function module did you specify the ranges and use it on the your initial SELECT statement?
An example (code available at RSAX_BIW_GET_DATA_SIMPLE)
Ranges:
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
APPEND L_R_CARRID.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
APPEND L_R_CONNID.
ENDLOOP.
Select with ranges:
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
Try also to put a break-point in your function module, at SELECT statement line, to see how your function is making the DB call.
Hope that this may help you.
Regards. -
Hello Experts,
When I Execute datasource 0CFM_DELTA_POSITIONS in Delta mode, Iam getting the below error message.
Error msg: "Could not determine BW release of logical system"
Please help.
Points will be given.
Regards,
KVHi
find out if there is any issue with the RFC,
1. Go to the Source Systems under the Modeling tabe sellect your
SourceSystem and contextmenu (right click) and go with check.
2. Find if ther is any issue with the Extract checker go to T.coad RSA3
In the Execution Mode there is an option for Debug Mode.
Check the Debug Mode and go with Extraction tabe to Debug it
For Ex:
PROGRAM GP3TXQHZUZTOIJYM6H3QINXVNGD.
Generated subroutines for data transfer
Template.............: RSAPTD1
Generation program...: %_T01040
Generation date......: 31.12.2008
Generation time......: 10:22:58
Generation release...: 700
Generated by.........: SAPUSER
INCLUDE lrsapd00.
INCLUDE rsaucmac.
TYPE-POOLS: rsap, rsaot, rsfh, rsudt, srsc.
info source..........: 1_CO_PA_HULG
info source structure: ZOXID30233
transfer structure...: ZOXID30233
TYPES:
ty_t_cpinfos LIKE rsurcpinfo OCCURS 0,
lty_s_ext LIKE ZOXID30233,
lty_t_ext TYPE STANDARD TABLE OF lty_s_ext WITH DEFAULT KEY,
lty_s_tfe LIKE ZOXID30233,
lty_t_tfe TYPE STANDARD TABLE OF lty_s_tfe WITH DEFAULT KEY.
CONSTANTS:
g_c_mbc_languages(1) TYPE c VALUE
' '. "#EC NOTEXT
DATA
g_funcname LIKE tfdir-funcname VALUE 'RKE_BIW_GET_DATA_API'.
FORM DATA_TRANSFER *
--> P_T_SELECT *
--> P_T_FIELDS *
--> VALUE(P_S_REQUEST) *
--> VALUE(P_S_IDOC_PARAMETERS) *
--> P_SUBRC *
FORM data_transfer
TABLES p_t_select TYPE sbiwa_t_select
p_t_select_pass TYPE sbiwa_t_select
p_t_fields TYPE sbiwa_t_fields
p_t_fields_pass TYPE sbiwa_t_fields
USING value(p_s_request) TYPE rsap_s_request
value(p_s_idoc_parameters) TYPE sbiwi_s_parameters
CHANGING p_subrc TYPE sbiwm_subrc.
dynamically called by LRSAPU06, RSFHGEN2
DATA: l_datapakid TYPE rsap_s_task-datapakid,
l_subrc TYPE sbiwm_subrc.
IDOC tables/structures
DATA: l_s_ZOXID30233 LIKE ZOXID30233,
l_t_ZOXID30233
LIKE ZOXID30233 OCCURS 0.
extractor
DATA: l_fname LIKE rois-fname.
l_fname = 'RKE_BIW_GET_DATA_API'.
interface parameter: distinguish test from BW calls
DATA: l_read_only TYPE sbiwa_flag.
in case of delta request, call common delta extractor
CASE p_s_request-updmode.
WHEN sbiwa_c_updmode_delta.
l_fname = rsaot_c_extractor-gendelta.
WHEN sbiwa_c_updmode_repeat.
l_fname = rsaot_c_extractor-gendelta.
WHEN sbiwa_c_updmode_deltainit
OR srsc_c_updmode_initsimu.
l_fname = rsaot_c_extractor-gendeltainit.
ENDCASE.
Set SUBRC to 0 as default
p_subrc = 0.
PERFORM get_bwbcrl_testmode IN PROGRAM saplrsap
USING srsc_bwbcrl_20a.
IMPORT l_read_only FROM MEMORY ID 'RSFH_REO'.
IF p_s_request-immediate = rsfh_c_debug_on.
BREAK-POINT.
ENDIF.
Deadlocks bei paralleler Extraktion 30B SP07, Hw. 569760
IF p_s_request-updmode = sbiwa_c_updmode_full.
COMMIT WORK.
ENDIF.
Initialization of application API
CALL FUNCTION l_fname
EXPORTING
i_requnr = p_s_request-requnr
i_isource = '1_CO_PA_HULG'
i_maxsize = p_s_idoc_parameters-maximum_size
i_initflag = sbiwa_c_flag_on
i_updmode = p_s_request-updmode
i_rlogsys = p_s_request-rcvprn
i_read_only = l_read_only
TABLES
i_t_select = p_t_select_pass
i_t_fields = p_t -
hi all,
my senerio is, i want to extract the data from R/3 Data sources in to flat files through Extarct checker.
when i am doing the same by giving
data source 0CO_OM_OPA_5
data records/ call 15000
No of ext calls 10
it is showing the total records as 150000, but when Iam incresing the data records/call and No of ext calls the toal is increasing.
can any one tell me how can i check the total no of records in that paricular data source other than extract cheker method.
Thanks in advance
upendranathHi Upendranath,
I guess there is no limit.
You can also check this blog for more info on RSA3:
/people/sajeed.ms/blog/2006/02/12/extract-checker
Bye
Dinesh -
Short dump in extract checker (RSA3)
Hi,
While extracting the structure 2LIS_11_VAITM in RSA3, it's going to dump and giving the message in dump is 'The data type is "N" in the dataset, but "C" in the program. '.
The back ground is First I enhanced this structure with one Z field of data type NUMC18 and later changed this data type to CHAR18 and activated. Also replicated in BW side and it is CHAR18 in BW. But in RSA3 it's giving dump.
Please let me know regarding this.
Thanks in advance.Hi Shashank,
Thanks for your reply. The source field is also CHAR18. Actually the source field is changed fron NUMC18 to CHAR18 in R/3. That's the reason why I changed it to CHAR18 in the structure and activated. I think some where it's not getting updated to 'C' from 'N. Any idea I am missing something somewhere?
Thanks... -
Hi All:
I've a typical problem with standard extractors for purchasing. I filled setup tables for purchasing and checked the log for this job, 2,822 records are selected from EKKO. But when I check in RSA3 it brings 0 records. Also the cluster tables MC02*SETUP (MC02M_0HDRSETUP) has 0 records. I dont understand why, please help me.
Thanks,
Manasa.I remember that i had the same problem.....Try to do the extraction from BW...i believe that the RSA3 is not prepared for test extraction from Datasources that have Setup Tables....the same case in 2LIS_03_BF...you can made the initialization and in the RSA· is bringing 0 records but in BW you can see the data from setup tables....
Check that
Regards -
How to give the Fiscal year period in RSA3 for checking the data.
Hi BW Experts, good morning.
We have loaded the data monthlywise with selection parameters as Fiscal Year Period(FISCPER).
While checking the data consistency in both R/3 and BI, the selection parameter which i have given is in the format of 001.2005
I got the records in BI side.
But if we give the same format In RSA3 in the Fiscal Year Period tab , we r getting 0 records.
So kindly help me how to enter the selection parameters for 1 month.
Thanks
AnjaliHi sanyam ,
Thanks for the help.
I got it now.
Thank you so much
Bye
Regards
Anjali -
when i run RSA3 for a given create date range it returns ZERO records....BUT when I run the Delta Info-Package from BI I get the new records...is there something I am doing wrong??
Hi Will,
Your infopackage should also have the same selections.
Also,in rsa3 mode should be 'D' delta.
The results should reconcile...
Reward if useful
Manish -
Unable to find a data source in RSA5 which can be seen in RSA3.
Hi there,
I am unable to find the business content data sources in RSA5, but I can find the same data sources in RSA3 (extract checker).
I need these data sources to be replicated to BW and take it up further.
Any light on the above issue will be of great help.
Thanks in advance.
Regards.Guys
Regarding my previous messages, None of the posts where working out for me. I Had tried all the possibilites of your messages,but I am facing the same problem
1. I am unable to find data source in RSA5,But I had find the data in RSA3. Pls let me know how you guys what me to go. It will be really appreciated. pls let me know from ground level how do you want me to dig in to the issue. -
Financial Statement hierarchy not extracted correctly from ECC into BW.
Recently, one of my clients modified a FS hierarchy in production environment by moving some nodes from revenue to expenses, but BW is not picking up the change.
In ECC via transaction FSE3, one of our Financial Statement hierarchies shows three nodes - (Group Life_, Vehicle Plan only_, and Cost of Removal_) as Expenses. However, the BW extractor still shows these three nodes as Revenue and loads the hierarchy into BW that way as well.
DataSource is 0GL_ACCOUNT_T011_HIER with field HIENM = AE03. When running RSA3 Extractor Checker in ECC, the displayed data still shows the three nodes in question as Revenue and not correctly as Expenses.
Found SAP note 1061847 - Ind. For reversing plus/minus signs not extracted correctly. Applied note in ECC development environment, tested the extractor, and checked the load into BW, but the error regarding the nodes still exists after applying the fix.
Appreciate any suggestions or thoughts from the community.
Thanks!
SAP landscape is as follows:
SAP_BW 700 0009 SAPKW70009 SAP NetWeaver BI 7.0
SAP_AP 700 0007 SAPKNA7007 SAP Application Platform
SAP_BASIS 700 SAPKB70010 SAP Basis ComponentThanks SDNBI. I reviewed the suggested OSS note 1037447, but I am not sure how it applies in my situation. The suggested note seems to address a problem with the display of transfer structure in BW. Our problem seems to be that the extractor on ECC is incorrectly extracting the hierarchy structure. When viewing the data in RSA3 extract checker in ECC, I see the three nodes in question incorrectly positioned in the hierarchy. Thus loaded the same incorrect way into BW. Yet, when I display the hierarchy through transaction FSE2, the three nodes are displayed correctly.
-
Steps to Extract data from Source System
Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay -
CREATE_OBJECT_CLASS_NOT_FOUND runtime error during extractor checking
Hi Gurus,
I had to modify a generic data source based on a database view. I had to add a field for extraction. Since this field was available in the tables on which the view was built but not used in the view, I modified the view to to include the field. Then, I modified the extract structure to include the newly added field.
Now, when I try to check the extractor in RSA3 (extract checker), I end up getting a runtime error with details as below.
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Date and Time 3/6/2012 5:46:07
Short text
CREATE OBJECT: The class "\CLASS=ZCL_IM_CLC" was not found.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EXIT_MASTER================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not
caught in
procedure "INSTANTIATE_IMP_CLASS" "(METHOD)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified class "\CLASS=ZCL_IM_CLC" at CREATE OBJECT neither
exists as
local, nor as global class in the system, or is overshadowed by a local
data type of the same name.
Missing RAISING Clause in Interface
Program CL_EXIT_MASTER================CP
Include CL_EXIT_MASTER================CM002
Row 1
Module type (METHOD)
Module Name INSTANTIATE_IMP_CLASS
Trigger Location of Exception
Program CL_EXIT_MASTER================CP
Include CL_EXIT_MASTER================CM002
Row 15
Module type (METHOD)
Module Name INSTANTIATE_IMP_CLASS
Source Code Extract
Line SourceCde
1 METHOD instantiate_imp_class .
2
3 DATA: abs_type_classname TYPE string,
4 imp_obj TYPE imp_obj_type.
5
6 * Look for objects that have been created for this class
7 READ TABLE imp_obj_tab INTO imp_obj
8 WITH TABLE KEY imp_name = imp_name
9 calling_obj = caller.
10 IF sy-subrc = 0.
11 instance = imp_obj-obj.
12 ELSE.
13 CONCATENATE '\CLASS=' imp_class INTO abs_type_classname.
14 ***** dynamic object creation *******************************
>>>>> CREATE OBJECT instance TYPE (abs_type_classname).
16 ******************************************************************
17 imp_obj-imp_name = imp_name.
18 imp_obj-calling_obj = caller.
19 imp_obj-obj = instance.
20 INSERT imp_obj INTO TABLE imp_obj_tab.
21 ENDIF.
22 ENDMETHOD.
Can anybody please help me solve this issue?Hi Ajay,
Please check the following threads for your issue::
System Exception
Exception CX_SY_CREATE_OBJECT_ERROR
Why is CREATE_OBJECT_CLASS_NOT_FOUND ?
Dump CREATE_OBJECT_CLASS_NOT_FOUND with BADI in MM_MATBEL archiving object
Regards,
Arpit
Maybe you are looking for
-
I have two 750 GB hard drives in my new mac mini. Lion is installed on hard drive A and I want to move users to hard drive B. I have dragged the user files from HD A to HD B and have re-mapped the users to the folders. Turns out, in Lion the users
-
Gmail outgoing server issues with Apple Mail
Hi, I'm currently running OS X 10.8.5 Mountain Lion, and trying to set up my gmail account in Apple Mail. I can recieve mail just fine, but am not able to send mail. for the outgoing server i typed "smtp.gmail.com." When i look at the Mail Connection
-
Upgrade purchased Movies to HD or iTunes Extra
Two part question: 1) if I have already purchased the standard def version of a movie, can I upgrade that to HD paying only the price difference between the two? 2) if I have already purchased a movie in iTunes, and now that movie has iTunes extra co
-
Can I add or change sections of the template chooser window?
I would like to add more sections that just "My Templates". Anyone know how. I tried to do it in library but wasn't sucessful yet.
-
Hey Folks, In R17 you used to be able to create a blank WebLink field so that you can put an empty space in the page layout. You could hold ALT and type 255 to do so. I cannot get this to work on R18, has the work around been removed? Thanks Oli @ In