'RSNAST00' program scheduling issue for messaage output

Hi all ,
I have a requirement is as follows,
can any one help me ,The message NEU is processed through report program RSNAST00. This report program can be scheduled periodically or started manually.
For scheduling periodically I think one need to set up a batch process in SM35. How can i verify those details .
Thanks and Regards
Konidala

Hi ,
Thanks for reply,
can u please tell me , is it possible to find out .which job is assigned to particular program to schedule in background .
i mean if u know program name but not know the job which will scheduled to run that program .
is there any way to find out that job process details with know program.
Thanks and regards
konidala

Similar Messages

0calweek issue for report output

0calweek issue for report output
I have loaded 0calweek in my infosource.0calweek format is displaying differently
in the report
File : 12005
PSA :12005
ODS : 012005
Cube : 012005
Report: 05/0120
I am loading first to PSA -> Process Manually to ODS -> Cube
I am using 0calweek is SAP Provided object.I am not doing anything in the 0calweek
Please advise on this.
Advance Thanks

I solved this issue. I changed the layout everything seems to working now.

Scheduling issue for splitted operations in process order

Hello All,
I am facing problem after scheduling splitted operation in process order. The scenario is as follows.
In process order there are 5 operations. 10, 20, 30, 40 and 50. Out of the above operations 30 is splitted and two different resources are assigned to it. Control key assigned to splitted operation (30) is also scheduling relevant. Now the flow of operations will be as below.
1. Operation 10
2. Operation 20
3. Operation 30 - Operations is splitted (Resource used is A), qty to be produced - 10 kg.
a. Operation 32 - Quantity of operation 32 is changed to 5 kg. Resource used is B.
b. Operation 34 - Quantity of operation 34 is changed to 5 kg. Resource used is C.
4. Operation 40
5. Operation 50
Relationship exists between opearion 10-20, 20-30, 40-50 and between 30,32, 34 with 40. But there is no relationship exists between splitted operations 32 and 34 with any of the previous operations for eg. 10 & 20.
Issue is after scheduling all operations relationship remains maintained between operations 32, 34, 40 & 50. As operation 30 is splitted to two different operations equally total time for scheduling gets reduced but after scheduling of all operations all previous operations before operations 30 does not get resceduled? Scheduling type maintained for order is Backward Scheduling.
Please check this and guide me how all operations before operation 30 can be rescheduled as per changed timing of operations 32 and 34.
Best Regards.
Edited by: Avinash Mohite on Mar 19, 2010 12:43 PM
Edited by: Avinash Mohite on Mar 19, 2010 3:14 PM

Hi,
I hope u r doing in this way:
In the capacity header screen enter individual capacity as 2. then click on Got( on top of same screen) and go to individual capacites. Enter the names of two individual capacities, for example 1 and 2. These are the names of two work centres where u r splitting ur operation.
Double Click on operation 0030 and go to tab 'splitting' . Tick on ' required splitting' and enter maximum no. of splits as 2.Then go to capacity requirements assignment tab. enter the individual capacity as 1 and 2 and enter the splitted quanitites.Save and reschedule .
Check and revert.
Regards.

Issue output options for reprinting output for delivery items

Hi Gurus,
I want to create the new output for delivery but at item level.
There is a standard proceduere available for trigger output at item level.
But I am not able to find the option to re-issue or see the print preview as that is not option is available in the standard menu at VL02N.
Due to this I am not able to debug the code as during triggering the output at item level both the program and script are called in background.
So is there any standard option available at item level to see the print preview as we can at header level.
If you requried any additional information then please let me know. Eagerly waiting for the reply.
Regards,
Sagar

Hi Arun,
Yes I want output to be trigger at the item level in the delivery.
If i tirgger the output that output at item level, i see the ouput as green (ie successful)
but when i got menu and try to issue to output i do not see this output type in the list and shows all header output types only..
Due to this i am not able to debug my program when doing print preview..
So i need a way where i can see the my program in debugging mode.
And VT70 is not useful to me i do no shippment no. but I have only delivery with me.
Regards,
Sagar

Issue in PDF output for xml report

Hi,
I developed one template in RTF and output in pdf is looks fine.
I have issue in the output, For some invoices i have more lines,when the line details comes to next page for the same invoice i can able to view only the lines information in the next pages for the same invoice without any header details.
I need header information too if the lines comes to the next page.
i given <G_Headers> in the top of the page and <End for each> in the end of the page.
please how to resolve this issue.
with regards
Ram

There are lot of ways of doing this,
Simple one is given here.
If you are using table to display the rows, there is option in word table properties, to repeat the header in each page,
Repeating table headers
If your data is displayed in a table, and you expect the table to extend across
multiple pages, you can define the header rows that you want to repeat at the start
of each page.
1. Select the row(s) you wish to repeat on each page.
2. From the Table menu, select Heading Rows Repeat
Check out in user guide.

How do I program a NI 6602 card to send trigger pulses, one at each output port, triggered by an input trigger signal, using only one counter for each output port?

Hello,
I have managed to program a NI 6602 card in LabView to send pulses on three different output ports, one pulse on each output port (with individually chosen delays) for each input trigger pulse coming on a separate input port. It is the DAQmx Create Channel (CO-Pulse Generation-Time)-VI that I have used for this, see attached code. However, this VI controls both pulse delay and pulse width, and therefore uses two counters for each output port (although you only specify one counter in the VI input signals), as I understand.
In my application though, I only need to have the delay chosen, the pulse width can be arbitrarily short, and thus I should only need one counter for each output port. How do I accomplish to program this in LabView?
Best regards,
Claes
Attachments:
Configure Side Camera Flash 1 Triggering.vi ‏47 KB

Well you're welcome to do that--it will work just fine as long as you are configuring a start trigger.
<rant>
However, personally I really don't like putting multiple counter outputs in the same task. I have seen so many people assume that the counter outputs would be synchronized due to having them in the same task when this is not the case (you need to configure a start trigger in order to synchronize the counter outputs even if they are in the same task). This is the only case I can think of where multiple channels in a DAQmx task are not automatically synchronized.
As an example:
Running this on my PCIe X Series gives a measured 2 edge separation of 1 ms + {7.78 us - 10.11 us}. This would likely be much worse on a bus with more latency (e.g. USB).
The resulting output is close enough to what you might expect that it might go unnoticed, but really these counter outputs are not synchronized and it would be easy to glance at the code and not even think twice about it. For the small amount of extra work on my end to create a separate task for each counter, it really clears up some ambiguity about what the counters are actually doing. For me it's worth it.
So again, for your case there really isn't a problem with having the counters in the same task since you are using an external start trigger anyway. I have just gotten in the habit of avoiding doing this.
</rant>
Best Regards,
John Passiak

Calling another program and waiting for output

Hi,
I'm writing a program that passes a file created for an application called Net Sim but has to wait for the output. Net Sim lies in another directory from the java files and I don't know how to call the program with the file created as a parameter, such as:
ns2 network1.tcl
where 'ns2' is the dos command to run net sim and 'network1.tcl' is a file passed as a parameter to the program.
I've tried
try{
Runtime r = Runtime.getRuntime();
r.exec(" <directory> ");
}catch(IOException e){
System.out.println("Error " +e);
This doesn't work though and I could use some help, as well as how to save the file created by the program in another directory.
Finally, I need to know how to make the program wait for the output from net sim which is a file I intend to use. Can I do this with a while loop etc.?
I thank you in advance for any help,
Regards,
Gary.

Here's an article from JavaWorld describing some of the pitfalls when using Runtime.exec() that might help you:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Financial Reporting - Exporting Batch for Command Line Scheduling Issue

Financial Reporting 11.1.2.2
When I export, a successfully run scheduled batch, for command line scheduling the xml file that is exported only has the following information in it. I think that it is missing alot of information.
Any ideas what I am doing wrong, if anything?
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<JOB_OBJECT OBJECT_ID="0">
<DATA_SOURCE_USER_CREDENTIALS DS_PASSWD="" DS_USER_NAME=""/>
<HR_USER_CREDENTIALS HR_PASSWD="" HR_USER_NAME=""/>
<OUTPUT_OPTIONS>
<HTML VALUE="No"/>
<MHTM VALUE="No"/>
<PDF EXPORT_PDF_FOLDER_LABEL="" VALUE="Yes"/>
<SAVE_AS_SNAPSHOT VALUE="No"/>
<PRINT VALUE="No"/>
</OUTPUT_OPTIONS>
</JOB_OBJECT>

Hi again,
I am not sure if you can extract the formatting to Excel... I had also issues.
Can you please try to retrieve the report into Excel via Smartview? Check page 136 of http://docs.oracle.com/cd/E40248_01/epm.1112/smart_view_user.pdf
Regards,
Thanos

Program Scheduler that will work for jar files or scripts

I am looking for a program scheduler that I can execute jar files or scripts that run jar files. Need scheduler programs every 10min between 7:00am and 5:00pm.
Anyone know a good tool for this? I would appreciate any help.

iCal

Configuring cronie for mailing output [solved]

Hi,
I am having a hard time setting up cronie for mailing output. Jump to the last sentence for the actual question.
From man 8 cron, I read that the -m option "allows you to specify a shell command to use for sending Cron mail output instead of using sendmail(8). This command must accept a fully formatted mail message (with headers) on standard input and send it as a mail message to the recipients specified in the mail headers". I do have msmtp installed. I can do this and receive email successfully:
$ msmtp -t << eof
> To: <my address>@gmail.com
>
> test
> eof
Thus I know that msmtp -t is the command I must provide with the -m option.
Then, I followed these instructions and created /etc/systemd/system/cronie.service.d/mailing.conf which contains:
[Service]
ExecStart=
ExecStart=/usr/bin/crond -n -m 'msmtp -t'
Note: the first, empty ExecStart cancels the former one from the original .service file.
After starting cronie.service, this is the result of systemctl status cronie.service:
cronie.service - Periodic Command Scheduler
Loaded: loaded (/usr/lib/systemd/system/cronie.service; enabled)
Drop-In: /etc/systemd/system/cronie.service.d
└─mailing.conf
Active: active (running) since Mon 2013-06-24 22:58:24 EDT; 2s ago
Main PID: 1457 (crond)
CGroup: name=systemd:/system/cronie.service
└─1457 /usr/bin/crond -n -m msmtp -t
Jun 24 22:58:24 electron systemd[1]: Started Periodic Command Scheduler.
Jun 24 22:58:24 electron crond[1457]: (CRON) INFO (Syslog will be used instead of sendmail.)
Jun 24 22:58:24 electron crond[1457]: (CRON) INFO (running with inotify support)
Jun 24 22:58:24 electron crond[1457]: (CRON) INFO (@reboot jobs will be run at computer's startup.)
It seems that systemd drops the single quotes and takes -t as it's own parameter instead of passing it to msmtp. You can also see that crond logged "Syslog will be used instead of sendmail". I can actually see the output of my commands in /var/log/crond.log. How should I quote the space between msmtp and -t in the ExecStart line of my .service file?
Last edited by a_neutrino (2013-06-30 21:54:53)

Hi,
Thanks a lot for your help. The issue is [solved].
dif wrote:You have to create a file /etc/aliases that holds the addresses where e-mail notifications will be sent to when a user's cronjob creates an output.
It seems unnecessary. The MAILTO variable set in the crontab accepts a complete email address.
dif wrote:Contrary to Wiki, there are no commas separating e-mail addresses if there are a few in a line.
The msmtp man page also says to put commas.
dif wrote:
There is a special script distributed with Arch that is able to scan /etc/aliases for a valid domain address and then calls msmtp. Here is its path
/usr/share/doc/msmtp/find_alias/find_alias_for_msmtp.sh
Copy it to /usr/bin/ and create a simlink:
sudo cp /usr/share/doc/msmtp/find_alias/find_alias_for_msmtp.sh /usr/bin/find_alias_for_msmtp.sh
sudo ln -s /usr/bin/find_alias_for_msmtp.sh /usr/bin/sendmail
Why didn't you just :
chmod +x /usr/share/doc/msmtp/find_alias/find_alias_for_msmtp.sh
ln -s /usr/share/doc/msmtp/find_alias/find_alias_for_msmtp.sh /usr/bin/sendmail
Also, I had to modify the find_alias_for_msmtp.sh script a little because cronie calls sendmail without any parameters:
diff --git a/scripts/find_alias/find_alias_for_msmtp.sh b/scripts/find_alias/find_alias_for_msmtp.sh
index fb485dd..346f313 100644
--- a/scripts/find_alias/find_alias_for_msmtp.sh
+++ b/scripts/find_alias/find_alias_for_msmtp.sh
@@ -16,15 +16,18 @@ MSMTP=`which msmtp || echo "/usr/local/bin/msmtp"`
if [ "$1" = '-i' ] ; then
v_recipient=$2 # mailx calls sendmail with -i as the 1st param and the recipient as the second param
-elif [ "$1" = '-t' ] ; then # most other programs call sendmail with a -t option
+elif [ "$1" = '-t' -o $# = 0 ] ; then
+ # Most other programs call sendmail with a -t option.
+ # cronie calls sendmail without parameters and
+ # expects sendmail to find the recipient in the mail headers.
v_to=`echo "$v_msg" | grep -m 1 'To: '`
v_recipient=${v_to:4:50}
else
- v_recipient=$1 # no parameter, sendmail was called with the recipient as parameter
+ v_recipient=$1 # sendmail was called with the recipient as parameter
fi
-if [ $v_recipient != 0 ] ; then
+if [ "$v_recipient" != 0 ] ; then
# trim spaces from recipient email address
v_recipient="${v_recipient// /}"
Or maybe I missed something. I submitted the patch upstream to see if they think it's relevant.
dif wrote:Hope this helps.
Yes, it did! Thank you so much.

How to extract error message for each output type.

Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?

Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Print preview for PO output

Hi,
I have an issue with viewing print preview for PO output.
In Messages,output type has been defined.
I am trying to display print preview of the PO outpit by clicking on the print preview button.
Instead of displaying the print preview on my screen,the printout is directly fired in the printer.Please note I am trying to display just the print preview and not printing the PO.
This happens even when I have not set 'Print immediately' indicator in Communication setting and have defined 'Send with application own transaction'.
Your input on this would be of great help,
Regards,
Bikram

Hi,
Triggering print or Preview option is dependent on driver program assigned to output type in OMTB. It will be customized program. You need to do modification in your customized program.

Duplicate records in PO scheduled line for framework order (going for dump)

Hi all,
i am creating framework purchase order with item category B. I am assigning external number range for PO. This PO is created with respect to expense PR. i just found there is duplicate records are appearing in schedule line for the same item.
Then, after i save the PO, it is going for dump & sending some message to SAP inbox that there is duplicate records.
later i can not find those PO in the system. Please let me know where i am doing mistake ? why duplicate records are appearing in PO scheduled line ?
Thanks a lot
pabi

Hi,
Once you please debug the particular program with the help of ABAPer. That may resolve your issue. Thanking you

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

'RSNAST00' program scheduling issue for messaage output

Similar Messages

Maybe you are looking for