RSPLAN - Issue to acces a Cube on Planning Modeler

Hi All,
I have SAP_ALL and SAP_NEW access . I could access RSPLAN and when I click Start Modeler, I could see the Info Provider Selection.
When I click start , not displaying real time(transactional) cubes or Multicubes. Checked InfoProvider technical name, Infoprovider description, Last changed by..but no object displaying.
Is there any portal role I need include??
Your help greatly appriciated..
Best Regards,
Venkat.

Hi Venkat,
first check if the BI Java to ABAP connection is configured properly: Run the support desk tool as described in SAP note <a href="http://service.sap.com/sap/support/notes/937697">937697</a>. Everything needs to be "green".
Secondly, run function module RSPLSIP_INFOPROV_GETLIST with
I_MAXROWS                       0
I_SEARCHCRIT                    K
I_SEARCHSTR                     *
If it returns the right list of InfoProviders, it's a Java issue. If not, it's an ABAP issue. -> Open a customer message.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

BI Java and BI ABAP -RSPLAN issue

Hi All
We are working with BI system ,using BI 7.0 Java and BI ABAP as separate systems on same host.
Already run the template intaller for BI Java and ABAP integration.
But facing some issue ,when going ot BI ABAP and RSPLAN and clicking the Start Mideller
it is opening a browser as http://host:8000/sap/public/myssocntl?sap-client-XXX
Since this is not correct and it should open BI Java portal instead of ABAP stack page.
Instead this should open a Url like this http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler?
I check on BI ABAP system under SAP Reference IMG -> SAP Customizing Implementation Guide-> SAP NetWeaver _> Business Intelligence-> BI Integrated Planning -> Settings for Starting the Planning Modeler.
There the default Url is BEx Portal Server and the url is
http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler
Can anybody let me know why this is going to ABAP server instead it should go to Java.
Regards
Ajay
Edited by: Ajay Sandal on Mar 10, 2009 2:31 PM

Hi Ajay ..
Good news that ur issue is resolved ..
I have somewhat similar issue .. Hopu u can put some light ..
I have Bi 7.o with Add on java ,
In RSPLAN from ABAP system , modular page is not coming . if i click on start moduler button in RSPLAN ..portal page is coming up and i have to give logging details .
Please suggest .
Thanks

Load from cube to planning area

Hi,
We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
Scenario is like this.
For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero (but it was blank) and on D1 Zero and on D2 as 2 in cube.
I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
Can any one put some light and help me out from this issue.
With regards,
Sreerama

Hi Seerama,
I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
When you load the data, you should indeed not flag "ignore zero value"
If the issue you have is in your cube (between the file and the cube) then it is another matter...
Kind Regards,
Julien

Linking existing Essbase Cube to Planning

My business team created an Essbase cube, and now they want us to link that cube to Planning.
I opened an SR and I was told the following:
1. Ensure you have a test environment to create this new Planning app before moving to production.
2. Create a new Planning app in the test environment with the same name as the production Essbase cube.
3. Export all Essbase data.
4. Copy over the outline to the new Essbase cube in the test env. You can copy over the rest of the Essbase objects as needed (calc scripts, report scripts, etc).
5. Import the Essbase data into the new Essbase cube.
6. refresh Planning
Everything went well except for Step 6. When I do the refresh from Planning, the Essbase Outline gets updated with the one from Planning which doesn't have anything since it was just created.
I need to refresh the Planning Outline with the the one from Essbase that does have the data the users have been working on.
Thanks.

Hi,
You will have to define all the dimension membes etc to Planning. Because Essbase is the database, it will be updated with planning information... There are no shortcuts.. But you can export your dimension members from existing Essbase and load into planning using HAL/ODI/DIM..
Use outline extractor tool to get the existing dimensionality and create 1 metadata file per dimensions.
I believe Oracle support thought that you want to create a new Essbase cube from existing Planning cube.
Cheers
RS

Performance issue in browsing SSAS cube using Excel for first time after cube refresh

Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.

Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

Problem While calling Planning Modeler thru T Code RSPLAN

Hi All,
     When I am starting the planning modeler and after entering the log on details on SAP Netweaver, the web is showing blank tabs of Info Provider/Aggregation level/etc.. Only blank tabs are appearing without any data.
       I have gone thru the SAP Note 919850 (Problems with Planning Modeler..) but it didn't help. Also let me know that is their any connection of plannning modeler with the BI Web Template Maintenance??
    Thanks in advance.
Amit Verma

Hi Amit,
You need the following authorizations to work on planning modeler.
Authorization objects for business planning:
S_RS_ALVL: Authorizations for working with aggregation levels
S_RS_PLSE: Authorizations for working with planning functions
S_RS_PLSQ: Authorizations for working with planning sequences
S_RS_PLST: Authorizations for working with planning function types
S_RS_PLENQ: Authorizations for maintaining or displaying lock settings
Also you need to be on SPS12 for the input ready queries to work effectively.
Some times there could be an issue with the JCo connectivity between the Webdynpro and the BI system.The user assigned to the JCo destination for BI metadata in webdynpro does not have enough authorization in the BI system.
The above authorizations would sort and also check with your Basis team about the JCO.
Refer this too
/thread/227167 [original link is broken]
Hope this helps and assign points if it does.
Raja

Release of History from Info Cube to Planning Area

Hi Experts,
I am using program /SAPAPO/RTSINPUT_CUBE to load sales history data from Info Cube to Planning area. Most of the data gets loaded but for few CVCs we get following message: -
549 combinationens of InfoCube are not contained in the BasisPlobStru
While checking up these CVCs in transaction /SAPAPO/MC62 and Planning Book I can see that these CVC exist and data is also visible.
Could anyone please help me out with the reason and what should be done to encounter this.
Thanks in Advance.
Thanks and Regards,
Chandan

hi Chandan,
First of sincere apologies for not having read the query completely.
regarding your query on 549 combinationens of InfoCube are not contained in the BasisPlobStru, as you have stated that the CVCs exist in the MPOS.
But can you please check if the CVCs maintained in the MPOS are the exact CVCs that are mentioned in the messgae. For example, the message is for location product sales org Country. Can you check if the CVC exists for this combination for which the forecast is being loaded from the source? For example it is possible that data is being loaded for Loc1 Prod1 SalesOrg1 Country1, but the CVC exists for Loc1 Prod1 SalesOrg2 Country1, then such message appears.
So can you check if the exact CVCs are exisitng in the MPOS as indicated in the messages?
Rgds, Sandeep
Sorry again for misreading on your query.

Jco connection creation for plan modeler on BI 7.0

If I open plan modeler RSPLAN on BI 7.0 I am getting u201CJco connection not availableu201D message so I tried to create the connection from webdynpro content administrator.from there I could see all the connections in red colour
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
So I have chosen u201Ccreate u201Coption of the above connections to establish Jc0 .please let me know what parameters to be given for each settings.
For example we take BI_METADATA ,
General data:
Name : BI_METADATA
Client u2013 xxx ( should we have to give BI client no here ,by default it shows 000)
J2ee cluster :
Default :hostname ( no doubt)
Connection type:
Dictionary melta data( chosen by default u2013 no doubt)
Application data:
Message server :SID hostname (no doubt)
System name
Logon group:
User authentication :\
Username : **** ( should I have to give the user name of BI client)
Password
Confirm password :
Please carify the above doubts and help me out to resolve the issue Plan modeler
Once I set the connection of each should I have to restart JAVA engine,
I would appreciate all your help and suggestion

Take the Basis help to troubleshoot it
919850 Problems with the planning modeler and the planning wizard
901022 Integrated planning: RSPLS321 (J2EE engine not found)
947376 Troubleshooting JCo and AdaptiveRFC in Web Dynpro for Java
One more thing is to check if the SLD is maintained properly or not:
Hope it Helps
Chetan
@CP..

Invalid value for variable 0calyear in planning modeller

Hi Experts,
I have an urgent requirement. In my planning modeller I have a variable for 0calyear for accepting current year and target year. If I give target year(for example, 2015) which is not present in 0calyear it is showing error that 2015 is an invalid value for 0calyear. If I give 2012 it is working fine because it is already present in 0calyear.
I would like to know how we can solve this issue. To forecast data anyway we have to enter a future year. I would really appreciate if anyone could give some information to solve the issue.
Thanking you,
Jerry.

Hi Jerry,
Just a thought.
Can you load a flat file data with year values into a DSO with 0CALYEAR as key? ( SID generation as active ).
What I am expecting is this flat file load will generate SIDs for 0CALYEAR in future year as well.
Subsequently if you try to enter that in your planning variable it should work.
I understand this is not a perfect solution. But want you to try and adopt if this is a reasonable work around.
Thanks,
Krishnan

Error in planning modeller in EP

Hi all,
When i login through Enterprise Portal in BW 7.0 Server(i.e)., Netweaver 2004s, i tried to enter Planning MOdeller. I am getting error when i click Planning Modeller to work.
please treat this as urgent issue and revert back to me if u solution for this issue.
Thanks in advance.
Regards,
Mohankumar.G

Hi Mohan,
Where are you having this issue? is it upon starting the app or during a sequesnce of operations. Ideally, you should have created RFC connection for the application to work.
you can go to the web dynpro administrator and navigate to the Planning modeler application. On selecting it, you will see which RFC connections need to be maintained for this app. Create and test them. This should resolve initial issues.
Also, the backend user should have the necessary authorisations.
regards,
Shantanu

Error after Save Plan Data in Planning Modeler

I'm working with IP NW 7 SP16.
Scenario:
I added a KF to Real Time Cube. Re-activated this cube and Multiprovider.
Made corresponding changes in Aggregate, re-activated.
All these objects look OK.
Planning functions work fine. However then I SAVE Planning Data in Planning Modeler (Planning Sequence) I get an error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
The OSS Note 1057548 refers to SP 15 ( I'm on SP16).
I guess something nedd to be regenerated. I ran RSPLR_GENREP_DELETE_ALL with FUNC1
but it didn't make any difference probably because the Planning Funcitons work OK.
Any suggestions?

Hi,
could you also regenerate the artificial queries MULT/!!MULT where MULT is the name of your Multi-/Infoprovider/AggLevel in transaction RSRT.
Hope this helps ...
Regards Matthias Nutt

No InfoCube visible in the Planning Modeller in BI - IP

hi all
I have been facing a problem with newly installed BI 7.0 system for Integrated planning.
I am not able to find any of my real time Cubes (all in plannning mode) while searching in the Planning Modeller.
my scenario is
BI 7.0 Patch abap SP 14 and Java sp 12.
My java engine is on the EP & all my BI webreports are opening fine from EP.
I have tested my J2EE engine , it is working fine.
also my Webdynpro is also working fine.
But i am not able to find out the reason why the integrated planning modeller is not able to search for my Realtime infocubes.
regards
Ramesh

Hi again
I have found out that these 4 parameters in WebDynpro in my EP dev
BI_METADATA
BI_MODELDATA
WD_ALV_METADATA_DEST
WD_ALV_MODELDATA_DEST
SAP Notes suggest that the destination in these notes should be BW dev system.
But in my EP system , i have found that they are actually pointing to my ECC 5.0 system. THis is correct?
or should make the changes for it to point to BWD instead ?
would it not affect my existing ECC reports on the portal.
also some notes suggest that my SLD sytem should show my BWD in the technical systems list, if not i should create them.
But unfortunately it is only showing the EP dev, EP prod system in the list . there is no BWD system in the list .
SHould I create a new tech system for my BWD ??
Pls correct me if i am wrong.
regards,
Ramesh

RSPLAN - Issue to acces a Cube on Planning Modeler

Similar Messages

Maybe you are looking for