Rtmp flv stream problems (connection rejected for certain resource addresses)

Hi all,
I have a problem loading rtmp flv and mp4 files. Here are some example addresses I am trying to load:
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Brett_Yormark_Powershift_Sta ndard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Peter_Moore_Powershift_Stand ard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Danny_Jordaan_Powershift_Sta ndard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Lord_Mawhinney_Powershift_St andard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/mp4:114/114_640x368.mp4
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/mp4:boats-show-cannes-24-09-2010_1.mp4
None of these appear to work, however they do work with the original streaming player I created. I'm using an adaptation of the Strobe Player and an unmodified version of the OSMF framework.
I'm using a slightly modified version of the StreamingURLResource class when loading which adds some functionality overriding the mediaType getter, but I dont think that this is the cause because it simply returns the super.mediaType property unless the URL is a YouTube URL.
When I break into the class responsible for creating the NetConnection I notice that I always get a net connection rejected status.
Any help would be appreciated. You should find that this problem is reproducable with any of the example code on the OSMF website.
Cheers,
Mat

Hi Mat,
I didn't manage to get your assets load either. Are they still up?
Ty the following assets with your modified Strobe Media Playback:
http://osmf.org/dev/1.5.rc1/debug.html?src=rtmp://sz612asgrc6v4.cloudfront.net/cfx/st/andr ian_adina_1&urlIncludesFMSApplicationInstance=true
http://osmf.org/dev/1.5.rc1/debug.html?src=rtmp://sz612asgrc6v4.cloudfront.net/cfx/st/mp4: Beowulf_1080p.mov&urlIncludesFMSApplicationInstance=true
(mind urlIncludesFMSApplicationInstance setting, which you need for accessing cloudfront assets).
Looking forward to your reply,
Andrian

Similar Messages

  • Upgrade FMS2 - Streaming Server 3.5 - Video not streaming - NetConnection.Connect.Rejected

    I have Flash Media Server 2 set up with a simple bandwidth detection application (with serverside code), and a videoplayer application (no serverside code).    I have upgraded to Flash Media Streaming Server 3.5 and have managed to successfully get video to stream using the basic examples on the startup screen both locally and from another machine.  However, when I try and connect to either the bandwidth detection application, or the videoplayer I get the error message:
    NetConnection.Connect.Rejected
    [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (**my appname**/) is not a valid signed application; loading access denied.
    I saw another post in this forum saying that for custom applications you need Flash Media Interactive Server instead of Streaming Server.  This worries me as I'm quite far down this route now and don't want to tell my boss that actually we need to find another £2k to make this a viable solution!  But looking at the credentials of Flash Media Streaming server (http://www.adobe.com/products/flashmediaserver/compare/), it seems to be that what I want to do is viable.  At worst I would have thought that only the bandwidth application would be a problem as it has serverside code.  But even so, the Streaming Server apparently does have bandwidth detection.  How does this work then?
    By having the Steaming Server am I somehow tied into Adobe video players if I want to use the streaming capabliities?  Am I not able to have my own named application?    Or is it simply likely that there is some setting somewhere I have missed which is causing the error.
    Any advice would be much appreciated as I'm struggling to get to the root of these answers on my own.

    You just need to define handlers specially onBWDone on client side to do Bandwidth detection. Just check example "Bandwidth" in documentation/samples/Bandwidth/Bandwidth.as.
    Since you are using VOD, i think you can just pass "true" as second parameter when you make nc.connect call in you client side and VOD application would make call to checkBandwidth and would call onBWDone when it finishes bandwidth detection. Read more about this in Client API documentation in SSLR.pdf and Dev_Guide.pdf.
    Also Adobe has come with advanced Bandwidth detection which you can do using client-side Flash Player API's - Please check this link for more info:http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_on_demand.html
    Also you can NetStreamInfo documentation which should be present in AS3LR (check documentation folder of FMS)

  • Problems with password for alias email address

    I am using two e-mail addresses, one the original @verizon.net and an alias I set up @alias.com
    I was regularly -- but it seemed sporadically -- getting this following message, sometimes when I tried accessing, but sometimes just when the Apple Mail was open but I wasn't doing anything:
    Enter the password for user “ -- alias address --” on IMAP server “mail.--alias--.com”
    For a while I hit 'cancel' and everything worked fine.
    But then I went into "account" and tried to fix the problem ... and I think I changed the password for the alias. In any case, I am unsure what the password is...and I can't see it on Preferences/Accounts.
    Now the root "Inbox" and the "alias" addresses have the tilde by them, indicating offline. Nothing I do gets rid of the tilde. I get that same request for password.
    Nonetheless I am still getting all e-mails through the secondary "Verizon" account. That does not have the tilde and is receiving all my e-mails.
    I want to clean this up...and avoid the annoying continuing often request for password.
    AS I WAS TYPING THIS, the message from Apple Mail popped up again. I had to hit 'cancel' or 'OK' (back and forth, each one) several times before it stopped popping up. This has happened before.

    Have spent hours in Preferences/Account ... deleted account, replaced account ... tried SSL on and SSL off. Read "Help/If you can't receive messages". Used Connection Doctor.
    I CAN send messages with my alias but am not receiving to it. This is a major problem for me.
    There seems to be no way to find out what my correct password should be. I've got two in storage, one much more likely than the other. But neither works.
    I'm also uncertain of incoming mail server correct name.

  • Problem loading page for certain websites since upgrading to FF 29

    Since upgrading to Firefox 29, when I click on a link in my e-mail I will get a "problem loading page" tab with a server not found error message. This happens mainly when I get e-mails from BookBub.com and click on the link to go to Amazon to purchase books. I also get e-mails from BookSends that have Amazon links and when I click the links in the BookSends e-mails those work with no problems. However, the issue is not only with the BookBub e-mails. There are random links in other e-mails that will not work (Harbor Freight is another one that I've been trying to click an unsubscribe link in their e-mail and it will not work).
    I have tried clearing my cache, checked the firewall to make sure Firefox is allowed to access the web, checked the computer for malware but nothing has worked. Please help! This is very frustrating. Thanks!

    Please note that you have extensions installed that could be conflicting.
    *Trend Micro extensions and Norton extensions can be problematic.
    Can you disable those? Note that you do NOT need these to keep active virus protection. Norton is installed on your computer and is working system-wide.
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • Bypass spam filters for certain mail addresses

    I am looking for a way to bypass virus checks on mail from a certain mail user (actually system mail sent from a process that we have, so we can trust it).
    I have been playing with the @bypassspam_checksacl = qw( [email protected] ); entry in /etc/amavisd.conf but this doesn't seem to bypass as I would expect.
    Does anyone know if this file might be over riden else where or perhaps if I can bypass in another way?
    Cheers

    Greetings
    there is probably more than one way to skin a cat.
    here is a postfix only method however i'm not sure if it will pass all before amavid. so see the snippit from the amavisd.conf below.
    main.cf
    smtpd_recipient_restrictions = hash:/etc/postfix/spamlovers, .....
    create a file call spamlovers
    [email protected] OK
    biggroup.net OK
    that will prevent all subsequent anti-spam checks from being applied to
    the listed recipient domains/addresses. in short - they want spam, let
    them eat spam.
    ((snip)) amavisd.conf
    # %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
    # lookup tables:
    # (this is mainly a time-saving option, unlike virus_lovers* !)
    # Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
    # access list @bypass_virus_checks_acl and regexp list
    $bypass_virus_checks_re
    # are used to skip entirely the decoding, unpacking and virus checking,
    # but only if ALL recipients match the lookup.
    # %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
    # do NOT GUARANTEE the message will NOT be checked for viruses - this may
    # still happen when there is more than one recipient for a message, and
    # not all of them match these lookup tables. To guarantee virus delivery,
    # a recipient must also match %virus_lovers/@virus_lovers_acl lookups
    # (but see milter limitations above),
    # NOTE: it would not be clever to base virus checks on SENDER address,
    # since there are no guarantees that it is genuine. Many viruses
    # and spam messages fake sender address. To achieve selective filtering
    # based on the source of the mail (e.g. IP address, MTA port number, ...),
    # use mechanisms provided by MTA if available.
    # Similar to lookup tables controlling virus checking,
    # there exist spam scanning and banned names/types control counterparts:
    # %spam_lovers, @spam_lovers_acl
    # %banned_files_lovers, @banned_files_lovers_acl
    # and:
    # %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
    # (but no bypass_banned_checks, as $bypass_decode_parts controls it
    already)
    # See README.lookups for detailsabout the syntax.
    # The following example disables spam checking altogether,
    # since it matches any recipient e-mail address (any address
    # is a subdomain of the top-level root DNS domain):
    # @bypass_spam_checks_acl = qw( . );
    # See README.lookups for further detail, and examples below.
    # $virus_lovers{lc("postmaster\@$mydomain")} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of
    domain
    # $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
    # $virus_lovers{lc('example.com')} = 1; # this domain, but not its
    subdomains
    # $virus_lovers{lc('.example.com')}= 1; # this domain, including its
    subdomains
    #or:
    # @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
    # $bypass_virus_checks{lc('[email protected]')} = 1;
    # @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com
    .example.com );
    # @virus_lovers_acl = qw( [email protected] );
    # $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
    # $spam_lovers{lc("postmaster\@$mydomain")} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # @spam_lovers_acl = qw( !.example.com );
    # $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
    # don't run spam check for these RECIPIENT domains:
    # @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
    # or the other way around (bypass check for all BUT these):
    # @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
    # a practical application: don't check outgoing mail for spam:
    # @bypass_spam_checks_acl = ( "!.$mydomain", "." );
    # (a downside of which is that such mail will not count as ham in SA
    bayes db)
    I'm sure anyone of these methods will allow the lovers of the blessed spam to fill their hearts content. Hope you have good hard drives
    --j

  • Problems connecting Airport - self assigned IP addresses

    Greetings,
    I upgraded to a powerbook a few months back, and everything seemed to be working well enough until today. My internet connection (using airport on my powerbook) wasn't working. Usually I just unplug my modem, reconnect, and all works fine.
    Today, to my horror, airport does not reconnect as usual and I see the note
    AirPort has the self-assigned IP address xxx.xxx.xx.x and will not be able to connect to the Internet.
    I've tried using snow leopard cache cleaner, I've tried restarting, I've turned off my iPhone, and disconnected my old mac connected by ethernet.
    My iPhone works, using the same wifi, and there are other wifi users nearby.
    Not sure what else to mention, any ideas?

    try to do it manual:
    decide a ipv4 close to your iphone (if iphone has xxx.xxx.x.7) like x.8
    next, net-mask must be 255.255.255.0 (if there is something other it's wrong)
    router is seen when you open network in iphone, take this.
    could be like: 192.168.1.1, if your ip starts with 192 ...
    all this in network/more options

  • At sending mail to certain email address: MS Outlook stopped working and needs to restart

    I am facing that problem but only with certain email address while with some other it works fine. Thought the email address is the problem, I tried with iPad and it works fine. This signifies that the problem is NOT the email address but the software itself
    (ipad does not use Outlook). I have tried to disable add-on in registry but to no avail. Have used also MS diagnostic software without any success.
    Seems like this is a category problem, I wonder why Microsoft does not act on this bug?
    Please help
    Regards
    Phong Nguyen Anh

    Hi,
    This issue may be caused by the corrupted Auto-Complete cache, please run Outlook with the "/cleanautocompletecache":
    Press Win + R, type "outlook.exe /cleanautocompletecache" in the blank box, press Enter.
    This will remove all names and e-mail addresses from the Auto-Complete list. Then send the emails again to check the result.
    Anyway, could you let me know what symptom that makes it look like a category problem?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback?

    Any tutorial for Live RTMP Dynamic Streaming using Strobe Media Playback anywhere available on the web ?

    Thank you for the link but it does not solve my problem. In this thread they work with manifest xml files like a playlist. Which i tryed but also doesn´t work. Adobe declairs FMP with easy config and less code for non geeks. And this is exactly what i want for my project.
    Does anybody can post some  html sample code especially for dynamic streaming/ MBR wit Flash Media Playback??? For Live or On-Demand.
    Best
    Hinricht

  • How to connect to Akamai using RTMP SDK (Adobe Media Server Connector for C++)?

    We need to stream live video to Akamai using RTMP. But, we are trying to connect using ADOBE RTMP SDK (Adobe Media Server Connector for C++ 2.0.1), but have no idea regarding how to connect to Akamai using the SDK. How to make the SDK respond to the server challenges for password etc. If this can't be done using the RTMP SDK, we can use plain C++ for the purpose. But for that too, we don't have any idea regarding the steps involved to make it work. If anyone has any idea on how to connect to Akamai using the RTMP SDK or using plain C++ (a sample code will be very helpful), please help us out. If you can suggest any C/C++/.NET library too which will help us achieve it, we are ready to do so. Thanks in advance.

    hi,
    I am sorry I can not help you.  Could you do me a favor? I know you are using Adobe RTMP SDK.I want to know how to get it.
    I tried to contact adobe at [email protected] but it seems to be an invalid email address.if you know efficient way,
    please tell me.Thank you very much.

  • I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

  • Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

    I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

    "This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
    Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
    System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
    208.67.222.222
    208.67.220.220
    Then click OK, then click Apply.

  • TS1398 I have been having network problems on my Ipad and I reset all network settings as advised in the article about problems connecting to networks.  Now my Ipad will not allow me to sign onto any network....it will not accept the passwords for any net

    My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password.  I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password.  My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
      So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I had no problem connecting to my network and now all of a sudden I can't connect.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?

    I had no problem connecting to my network and now all of a sudden I can't connect my iPad.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?  I've gone thru all my settings and can't seem to find a way to log into my network.  Don't get the option to put in my password.  It just give me the name of my network and option of dismiss instead of password.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Problem when creating connection pool for Informix

    Hi all,
    could you please help me to create a connection pool for informix?
    I use a com.informix.jdbcx.IfxXADataSource driver and here are the properties
    user=informix
    password=informix
    url=jdbc:informix-sqli://TW010766:1526/vka:informixserver=TW010766
    dataSourceName=TestEntityPool2
    portNumber=1526
    databaseName=vka
    ifxIFXHOST=TW010766
    serverName=vka
    Here is the error message :
    Error during Data Source creation: weblogic.common.ResourceException: DataSource(TestEntity)
    can't be created with non-existent Pool (connection or multi) (TestEntityPool2)
         at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
         at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
         at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
         at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
    Could you please tell me what's wrong with the configuration?
    Many thanks in advance.
    Hoang

    Hoang Nguyen wrote:
    For JBuilder :
    URL : jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
    Driver : com.informix.jdbcx.IfxXADataSource
    username : informix; password : informix
    For WebLogic :
    URL : jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
    Driver : com.informix.jdbcx.IfxXADataSource
    Properties : password=informix
    user=informixOk. The problem may have to do with your reiterating all the properties below.
    url=jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
    portNumber=1526
    databaseName=vka
    serverName=vka
    ifxIFXHOST=tra019746All these above are implicit in the URL you give to jBuilder and weblogic.
    Try defining the pool with only the user and password as properties.
    >
    >
    Error:
    Error during Data Source creation: weblogic.common.ResourceException:
    DataSource(TestEntity)
    can't be created with non-existent Pool (connection or multi) (TestEntityPool2)
    at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
    at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
    at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
    at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
    Thanks Joe
    Hoang Nguyen wrote:
    Joseph,
    The driver that I use comes from informix.
    I've tried with JBuilder and no problem. JBuilder can connect to informixand
    I can see the tables from JBuilder.
    There's something wrong in the configuration with Weblogic.
    Many thanks for your help.I understand that there's something wrong with the configuration with
    weblogic,
    but the problem is due to a mistake in the input you gave to the pool
    definition,
    and I want to solve that. Please show me the URL, driver name and properties
    you give to JBuilder to make Informix connections. Also, show me the
    first few lines
    that get printend out when you run the weblogic start script. I want
    to see the
    line that prints out the classpath used in the script for starting the
    server.
    thanks,
    Joe
    Joseph Weinstein <[email protected]> wrote:
    Ok, I would like you to download Informix's driver from them, and
    run one of their example programs, just to prove you can connect to
    informix, using their driver, with no weblogic in the picture. We
    have
    to establish that, because that's all weblogic will be doing anyway.
    Once
    we know how to connect to informix via JDBC, we can do weblogic stuff.
    Joe
    Hoang Nguyen wrote:
    Hi,
    I forgot to mention that I'm working with Weblogic server 7 and
    Informix 2000 9.20.
    For the configuration, I followed the example given by Weblogic
    http://edocs.bea.com/wls/docs70/jdbc/thirdparty.html#thirdparty001,
    table 5.2
    Here is the example given by weblogic :
    user=username
    url=jdbc:informix-sqli://dbserver_name_or_ip:port_num/dbname:informixserver=dbserver_name_or_ip
    password=password
    portNumber =port_num;
    databaseName=dbname
    serverName=dbserver_name
    ifxIFXHOST=dbserver_name_or_ip
    If you take a look at the link, you'll see a note :
    "In the Properties string, there is a space between portNumber and=". I've tried
    that but it seems that this bug had been resolved. When I put the
    space,
    I've
    an number exception.
    Thanks for your help.
    Hoang
    Joseph Weinstein <[email protected]> wrote:
    Nguyen Hoang wrote:
    Hi all,
    could you please help me to create a connection pool for informix?
    I use a com.informix.jdbcx.IfxXADataSource driver and here are
    the
    properties
    user=informix
    password=informix
    url=jdbc:informix-sqli://TW010766:1526/vka:informixserver=TW010766
    dataSourceName=TestEntityPool2
    portNumber=1526
    databaseName=vka
    ifxIFXHOST=TW010766
    serverName=vka
    Here is the error message :
    Error during Data Source creation: weblogic.common.ResourceException:DataSource(TestEntity)
    can't be created with non-existent Pool (connection or multi)
    (TestEntityPool2)
    This means the pool was unable to make an informix connection withthe
    properties
    you gave. Please show me the few lines from an informix driver
    example
    program
    that makes a successful JDBC connection to the DBMS you want, andI will
    show
    you how to define a pool for weblogic to do the same.
    Joe
    at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
    at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
    at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
    at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
    at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
    at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
    Could you please tell me what's wrong with the configuration?
    Many thanks in advance.
    Hoang

  • I have a problem with mountain lion and now it's impossible to App Store to connect internet for looking for update !

    Hi,
    I have a problem !
    I have mountain lion now ... and now it's impossible to App Store to connect internet for looking for update !
    Could you help me!
    Thanks
    yculand

    Hi,
    I try but it s not nice sometime app store connect  to internet and sometime he cannot connect for looking for update !
    For information i dont have problem with internet connection !
    I think app store is not stable with mountain lion.
    Could you help me ?
    Thanks in advance for your anwser.
    yculand

Maybe you are looking for