Run 2 vi simutaneously

can i run two vi. on a Lenovo laptop simultaneously? one NI 435x Thermalcouple.vi for temperature acquisition. the other vi for 6K Parker motors motion control (no data taking).
Labview version 7.1
Window XP
thanks
Message Edited by Tian Zhou on 06-20-2008 01:53 PM

Or, are you not sure how to run VIs in parallel?
Message Edited by smercurio_fc on 06-20-2008 05:05 PM
Attachments:
Example_VI_BD6.png ‏3 KB

Similar Messages

Apple store only recommends adding 2 1GB cards, can I just get 1 for 1.5GB?

Hi,
I'm a graphic designer who has never had to deal with IT issues before, but I switched companies and now I'm the IT person...
I have a 20" iMac (late 2006), that came with 2 512MB memory cards for 1GB total. I am having a problem with my adobe creative suite products, where if I run more than one at the same time, one will quit on me. Correct me if I am wrong, but I believe this could be a memory problem. According to adobe, 1GB memory is the minimum it recommends to run the programs simutaneously.
In addition, I often get the "out of memory" message when I'm printing and/or exporting files, so I think I do want to upgrade.
My question: When I look up my model on the iMac store, it only gives me the option of buying 2 1GB cards of memory to upgrade me to 2GB total memory. But, I would think I could just buy 1 1GB card and replace just one of my current cards for a total of 1.5 GB?? My only concern with doing this is that the apple store does not give me this option, so maybe there is a reason I would not want to?
Please advise if I can do this (if I do, what 1GB card should I buy?), and if I can, would I want to? Or should I just go for the 2 1GB cards?
I don't really want to spring a $350 charge on my boss when $175 may cut it, but I don't want to spend $175 and then have to upgrade again.
Thank you very much in advance.
iMac Mac OS X (10.4.8)

a brody
OK Corsair ram working great for me, 8 month ago I bought one of the same 1GB Corsair module's from Fry's. I added it to the stock 512MB upgrading my Core Duo to 1.5GB. I will also continue to suggest to others that Corsair is a very good Ram supplier.
Corsair's warranty:http://www.corsairmemory.com/corsair/warranty.html
This lifetime warranty applies to parts that were purchased from Corsair-authorized resellers, or were supplied by Corsair directly. Authorized resellers are resellers who are listed on Corsair’s web site at the time of module purchase.
Also Newegg, CompUSA, Fry's and other's are on there resale list:
http://www.corsairmemory.com/corsair/whereto_buyresults.html
I have read many of your FAQ pages, Thank-You I realy have learned alot from all your hard work. Please consider adding Corsair to your FAQ ram page, maybe as something like, (poor man's ram or more affordable ram) with a warranty.
Thank's again!
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

Leopard and Adobe CS3 products

I was wondering if any of you had issues once an Adobe CS3 line of products were installed.
For instance, right now my iTunes refuses to force quite, there is no iTunes window, but the "application active" dot is still on in the dock...
After running multiple CS3 simutaneously, I find the apps crashing or having to force quit.
I've recently re-installed Leopard without an extra install options, ie, printer drivers, languages....
Maybe a PRAM re-start? Whadda ya think?
D

"...Dreamweaver has always...had some memory...issues, and tends to effect my system..."
I use DW CS3 almost constantly and have had absolutely no issues with it under both 10.4 and 10.5. I also used DW MX for years but I was not aware of any memory problems. Having said that, I would not recognize a "memory leak" if it hit me on the back of the head so I don't know how to advise you on that score. I have always been a "more is better" type when it comes to RAM and tend to run at least 50% of what the system will support. My Mac Pro has eight gigs so maybe I would not notice if some "leaked"....

Tuning directory proxy server parameters

I need help to tune following parameters of Directory proxy server 5.2patch4.
simultaneous operations per connection
Total operations per connection
Simultaneous connections to this group
simultaneous connections per ip address.
Before tuning these parameters, I wanted to know how can I find current usage of above parameters from directory server/directory proxy server. Right now there is no value set for these parameters.
Is there any tool/command line utility or any other way to find current usage of these parameters?
Any help will be appreciated. Thanks in advance.
Thanks
-Ashok

I think the default is unlimited. You can use these
params to tune your server.Thanks for response.
How do I know the baseline to set these parameters? What tool/utility can I use on Proxy server/Directory server in order to find the baseline for these parameters.
To make it more clear, how can I find from proxy server/DS server that how many currently simultaneous operations per connection are going on..
how many total operations per connection are running..
how many simultaneous connections to this group are running.
how may simutaneous connections per ip address are running.
Please let me know if you need further info.
Thanks again.

MQ tuning parameters for proxy poller

When configuring the MQ polling interval etc can someone advise whether it is possible to poll with a wait period; kind of like synchronous JMS polling but specifying a period to wait/listen before timing out?
At present we want to pick up the message as quickly as possible (since we have an SLA to turnaround a message within 2 seconds from arrival at MQ) and so we have a short 100ms polling interval but the problem is we have the CPU spinning at 30% (kernel time) which appears to be the polling only!
Ideally we'd make the polling interval 1000ms so long as the wait timeout was also 900-1000ms. Of course if all the implementation is rapidly polling within out "single" poll then the effect on CPU consumption would be the same.
Alternatively is there some other way of reducing the overhead of MQ polling (while retaining the ability to consume the message very shortly after it arrives)
regards

I think the default is unlimited. You can use these
params to tune your server.Thanks for response.
How do I know the baseline to set these parameters? What tool/utility can I use on Proxy server/Directory server in order to find the baseline for these parameters.
To make it more clear, how can I find from proxy server/DS server that how many currently simultaneous operations per connection are going on..
how many total operations per connection are running..
how many simultaneous connections to this group are running.
how may simutaneous connections per ip address are running.
Please let me know if you need further info.
Thanks again.

How can multiple vis share input from a DAQ simutaneously

How can multiple vis share data input from a DAQ simutaneously?
Recently I am building a EMG measurement platform and somehow DAQ data need to be shared by several vis at the same time.
Are there any ideas?

If you may need to add/delete tasks that will need th edata you may want to consider a publich/subscribe pattern. Basically your DAQ task will post a message to a single queue. The process listening on this queue (message broker) will determine if there are other processes registered to receive this message. When a device registers for a message it provides a queue to receive it on. The message broker will then post the message to all interested processes. The nice thing about this pattern is that you have dedicated code to handle broadcasting the message and it is very easy at run time to change the number of processes that get the message. The DAQ task will always send the message and will not care how many processes are listening.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How do you run Multiple Files on a single screen?

Greetings; Please only respond if you've ACTUALLY done this, no opinions requested.
I'd like to run several /.mov/mp4 files simultaneously on a single screen to simulate a 360deg view.
If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed thumbnails/2"X2" format. For example; Top, Bottom, Left, Right, Center images...
How can this be done in Premier...?...and then exported to a standard format...?
Again; Please only respond if you have ACTUALLY done this; no opinions please...
Thank YOU

If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed
When I did this type of shot before I had to do some tricky stuff....and the hardest part for me was keeping me from shooting the other cameras and those other camera operators, not to mention trying not to see all those reflections of cameras and everything in the car, especially when I flew over the roof on wire ! Eventually I got it done but I had to basiscally use space lights with skirts and diffusion and then tent the car off with silk ( this was in a large football field sized stage )...and then put little holes in the silk for the "lenses"...and then hire a lot of people to walk that silk around as the cameras all dollied on track with the movement of the silk... took forever to get the shot but it was beautiful if you squinted.
good luck !
ps...I when I edited this just like you want to do, with a lot of simutaneous screens within the frame, it looked so 3 dimensional people actually lost their balance watching it !

Running two wireless networks simultaneously

I am running two independent 802.11n 5GHz networks simutaneously. Each has a unique SSID. The first network is using channels 36 & 40 and the second network is using channels 44 & 48. When the first network is transmitting data and the second network attemps to transmit, the second network must wait until the first is finished and then start its transmission. If the first network then needs to transmit, it must also wait until the second network is finished. They keep flip-flopping back and forth. Is this normal? I know they have to wait until the "channel" is clear before they can transmit, but I'm using unique channels and unique SSIDs. Anybody have any idea what's happening and how to get around it?

I agree. The Draft N Standard does provide for a "speed drop and wait" period if another N network is running in the same area. I would "guess" that if there is any possible way you can do so - and of course only you know your circumstances, etc., so it may not be an option for some very good reason- consider combining your two units into one network with two accesspoints available on it. This will eliminate the "stop and wait" stuff, give you better coverage than the two separate networks, and be far less sensitive to various slow-downs, etc. If you reason for separating them is because you're isolating the non-N equipment on one network, if you're lucky enough that it's maybe just one or two printers and/or a computer or two - see if you can hardwire them either back to the AEBS N Units or to a powered hub that's then connected to the Base Stations. Getting the 801.11 B&G units off the air and onto hard wired connections will speed them up greatly, and eliminate any problems with these units slowing down your blazingly fast N-network access. I know it sure as **** did so for me. I had two printers (one w/ Ethernet and 1 with USB Only) and I migrated both of them to hard wired connection at the AEBS-N/g. The one non-N computer was literally beside the base station/cable modem anyway - so plugging it into ethernet was no problem at all. The result is that the remaining five or six computers with an "N-spec" card in them jumped in speed to where they can easily outrun anything my Time Warner Cable modem can ever hope to deliver. My whole network suddenly feels like it's hard wired vs airport. Amazing benefit for getting two printers and one aging computer onto ethernet and off the airports.
Good luck! But I am afraid that as long as your networks are seeing another "N" network in the area they're going to do this slow down and wait routine to avoid collision of data and retrys resulting from that.
All the best,
MI

Playing two sound waves across two different sound cards simutaneously?

Hello all.
With the help from old board posts and the example VIs packaged with Labview 2009 SP1, I was able to get part of the way.
The goal is to simutaneously play two .wav files, to two different sound cards. So far:
1) I can play one wav file to either sound card
2) I can generate two sine waves of different tones, and push each out to the two cards seperately simutaneously.
But when I replace those two tones from #2 with .wav files, the wave files play alternately. So wav_1 plays to sound_card_1, THEN wav_2 plays to sound_card_2, not simutaneously.
Is it even possible to play 2 wav files simutaneously out to different cards?
I've included a VI of the attempt in #2 above. Disclaimer: my labview skills are minimal and this vi was very experimental so it's probably terrible form.
Solved!
Go to Solution.
Attachments:
sample_code.vi ‏23 KB

Tzoom84,
Since there is no way to buffer your sound output on the sound card and use hardware triggering you will be limited to software start timing. You could use semaphores as you said, or simply wire both of the Sound Output writes in parallel inside a single while loop. Since windows is nondeterministic the best you will likely achieve is the two outputs starting within tens of milliseconds of one another. The time between the two starting will be affected by all other processes running on your system and may take much longer.
Regards,
Sam K
Applications Engineer
National Instruments
www.ni.com/support

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Report developed in 6i and open and run in 10g, Web Layout is not working

Hi,
Initially reports were developed in Reports 6i now we need to convert into 10g. I just opened the .rdf in Reports10g. Report is successfully running in paper layout and showing the data. But when i try to run the report in Web Layout im getting a BLANK INTERNET EXPLORER SCREEN. Why is it so? What should i do to run my report successfully in Web Layout? When i see Web Source, i am seeing the below code,
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="text/html;charset=ISO-8859-1" %>

<html>
<head>
<meta name="GENERATOR" content="Oracle 9i Reports Developer"/>
<title> Your Title </title>
<rw:style id="yourStyle">

</rw:style>
</head>
<body>
<rw:dataArea id="yourDataArea">

</rw:dataArea>
</body>
</html>

Please, guide to achive the Web Layout Report.
Thanks & Rgds,
M Thiyagarajan

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Error while running a Java Program

Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
<b>SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 </b>
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Run 2 vi simutaneously

Similar Messages

Maybe you are looking for