Run MRP for process order's requirements only

Dear Gurus,
is it possible to run MRP only for opened process orders, created on basis of planned orders?
The issue caused by very often production plan changes:
Example:
- during the working week quntity of one producing finished good can be frequently changed:
either down or up.
All these plan changes are shown in data of opened process orders (there is no other useful way)
To make such changes in MD62 won't be correct (plan and fact have to be compared)
At this moment system generates purch requsitions on the basis of all requirements (planned orders and process orders for finished good).
Partition of planned and process requirements will allow us to make the most accurate procurement supply.
Thanks a lot to all who will answer.
Viktor.

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

Similar Messages

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

No planned order created when run MRP for Sale Order

As I have told on the subject. My problem is system does not generate planned order for components in BOM
Some more information is: requirement class in SO is 043
I have choose "2" in tab MRP 4 for individual/collective and all component and finish product have MRP type is PD and Strategy is 20 - make to order
Please help me to solve this
Thanks

Hi Hoai Vu,
Please check in OPPQ plant parameters in SPRO weather you maintained for the plant conversions of planned order to production order.
SPRO-> Production> material requirement planning> plant parameters--> carry out plant parameters or over all maintenance of plant parameters (OPPQ)
Then check the for the material did you maintained the work scheduling view or not.
I hope helps you any queries please revert me back.
Regards,
Madhu.G

Is there any soln to display production line for process order in COOISPI?

HI,
When we run COOISPI for planned orders, the field MDV01 "Production Line" populates correctly (based on the value in the production version associated with the planned order). However, you run COOISPI for process orders, that same field is now blank.
Any pointer on how to display MDV01 in case of Process order.
Thanks in advance

Thanks for your reply. my requirement is to populate the field value of production line in the CIOISPI report. I have production line assigned to production version. It does display if you see the results for Planned order but not for process order and the 'production line' field remains blank. More importantly i am trying to display the results for the same production version in case of process order,
Can you plz provide me any pointers or the way we can have production line value if want to display COOISPI for process order.
Regards,
Nitin

User Status Profile for Process Order Operations

Hello Experts.
I have a need to set up a User Status at the Process Order Operation level that will prevent operation confirmation when the status is Active .
I have been successful at the following:
   --- Created a new Status Profile (transaction BS02),
   --- Creating a u201CHoldu201D status,
   --- Defined the Influence on Business Transactions,
   --- Set the allowed Object Types for the profile.
   --- In an individual Process Order operation, I can now select the Status Profile, and set the Hold status, and it functions correctly.
My problem is that I canu2019t figure out how to set my new profile as a default for Process Order Operations. For Production Orders, this is done in the IMG definition for the Order Type (transaction OPJH), updating field T003O-VRG_STSMA. However the Order Type definition for Process orders (transaction CORN) only has a field for a status profile at the header level. Iu2019ve searched through Configuration and the Recipe, and the Production Version, and the Control Key, but can find no where to set the default status profile for a Process Order Operation..
As a final desperate act, I manually edited a T003O record for a Process Order Type in our test system, but even this failed to set a default Operation Status Profile for subsequently created Process Orders.
If you have any knowledge about this, then please help.

As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe

Grouping, Pegging and Distribution (GPD) when run MRP for PS

Dear all,
As you know, MRP is a core of Planning Process. So when you run MRP for PS, SAP can't check stock in general stock and project stock at the same time. Now, my client have accept to run MRP base on project stock. But there are some problem when they give me requirement and actually situation in their company. One of them as below:
They have 3 WBS element (WBS 1, WBS 2, WBS 3) and they use the same material A. Their requirement is they want to run MRP to plan material for 3 WBS.
Solution 1: use MD51 and run MRP for Project definition and each of WBS element have respective project stock, the system will generate some of planned order for each oder reservation. After that, I will convert all of planned order to PR => PO => Good Receipt for each WBS element. When run MD04, I can see the stock for each project stock for respective WBS element.
Ok, I will talk about the limited of this solution. I suppose after complete technical for all of order reservation in WBS 1 and in project stock of WBS 1 have 3 material A not be use. But in WBS 2 is missing 3 material A. So when I run MRP again for WBS 2 by tcode MD51, the system will generate new planned order for this missing material A. This is not logic because I have enough material A for reservation in WBS 1. So I suggest my client that you should transfer material A from WBS 2 to WBS 1, they agree with me if they don't have many WBS element. But they have about 300 WBS element and they can't do transfer posting between many many WBS element. This solution 1 is not be accept.
Solution 2: I use GPD for this requirement. Firstly I will group WBS 1, WBS 2 and WBS 3 into WBS group. So use tcode MD04, I can see only WBS group and all of order reservation in each WBS 1, 2, 3 be showed on MD04 table. When I run MRP, the system will generate planned order for them. After that, I will conver all to PR => PO => Good receipt to WBS group. And in MD04 table, I can see project stock for WBS group. I begin transfer material from WBS group to each WBS 1, 2, 3. When all of order reservation in WBS 1 is technical complete, the material in WBS 1 have 3 material A not be use. And in WBS 2, I have a new order reservation and it be assigned 4 material A. At this time, project stock on WBS group is 0 but in WBS 1 is 3. But when I run MRP by tcode MD51, the system generate planned order with amount is 4. I wonder that why SAP does not check all material on all WBS element in WBS group to suggest a planned order with amount is 1. If SAP can solve this problem, my client will be accept this solution.
Hoping you support me.
Thanks, Regards
Hoai Vu

Hi Ahmed Rifaee
Thanks for your reply, I will talk about process in SAP.
So, I have 2 WBS element, that's simple because my project is have about 200 WBS element.
WBS1 have 2 order reservation for each actvity and material A0001 be use in 2 order reservation.
Order Reservation 1 needs 3 A0001
Order Reservation 2 needs 5 A0001
WBS2 have 1 order reservation for each activity and material A0001 be use in it
Order Reservation 3 needs 4 A0001
1.) If I don't group 2 WBS1 and WBS2 to one WBS group, SAP will have 2 project stock for each WBS. and when I run MRP, WBS1 and WBS2 run independent base on current project stock at each WBS. So, although project stock WBS1 is run out of A0001 while A0001 still exist A0001 in project stock WBS2, SAP still generat planned order for missing part A0001 in project stock WBS1.
2.) If I use GPD by group WBS1 and WBS2, I can solve this problem easy because they will use only one project stock for WBS group. Ok, after I good receipt A0001 into project stock, I'm sure that I have enough A0001 for 2 WBS1 and WBS2. But I can trace which reservation be ordered to delivery to them exactly. I try to use tcode MD09 to trace from Purchase order to Order reservation but I have just to trace in case PO have not been good receipted. I wonder that Pegging can help me in this case (PO have been good receipted).
Can you give me any idea for these problem
Thanks, Regards
Hoai Vu

MRP for Service Order

Hi Friends,
My client want to run the MRP according to Material Group and according to service order.What are the possible ways to run the MRP? How my problem can be resolved?Please reply...
Regards,

Hi Edit,
The question is not to run MRP for Service materials, - to run MRP for the Materials in a Service Order.
I have one service order in which I have raised requirement for 10 materials (eg. Raw materials).
MRP can be run Plant wise or Material wise.If I run Plant wise MRP, system will gather all the requirement that are required in the plant (including Sales order, Service order, Prod order etc..).
If I run the MRP Material wise, system will gather the requirement of that material in all types of orders.
But the requirement is to run the MRP only for a particular Service order (only for the materials and quantities required in the given Service order) and generate PR and PO for procurement. The material may also be required for another service order, sales order or prod order. MRP should not gather the requirement for other orders.
Hope my explanation is clear. Prasanna, please post the correct scenario if there are any deviation in my understanding of your query.
I am also Looking for the solution. If any one have idea please help us to solve the issue.
Thanks,
Babu.K

MRP for PM Order

Hi all,
i had created a equipment and i have a spare for that .
A NOtification is raised for it and further Work order for the same.
i want to Run MRP for the material .
What are the customisation settings required for this process .
thanks ,
Sridhar

Hi,
Check for the material code number,MRP Controller, MRP Type, As u want it with PM order then you may be thinking of
Consumption based or Reorder Point these parameters to be given in the system.
Then run the MRP & get your requirment fullfilled.
Ramesh

How to run MRP for Bulk Material without using LTP

Hi, how can I run MRP for BULK material without using LTP.
Thanks in advance
BK

Hi,
Use trasnsaction code OPPQ and goto BOM Explosion and selection depends on
Field selected
No dependent requirements are created for informational purposes for bulk material items in the plant selected. This can improve system performance.
Field not selected
Dependent requirements are created for bulk material items in the plant selected. These dependent requirements are displayed in the planned order for informational purposes only. They are not considered in the net requirements calculation; that is, they are not included in material requirements planning (MRP) and are not displayed in the stock/requirements list
Reg,
Deepak.
Edited by: deepak k b on Nov 11, 2008 6:56 AM

Checking Rule for Process Order

Hi Guys
I am using the standard checking rule for Process Order while releasing. This rule considers the quality blocked stock also as available stock and thus release the Process Order.
However the client does not want to include the quality block stock for process order. My question is:
1. If I create a checking rule which does not consider quality stock as available, and attach it to release of Process Order, will it make any change in MRP run?
2. Is there a means to show a warning message while release of process order to show the stock is in quality block state?
3. Is there any other means to alarm or warn the user before release of Process order about the material quality block state?
Appreciate you help / suggestion on this
Thanks in advance
Rahul

Hi,
Regards the stocks during MRP run, you can do it in tow areas
1. In OPPI, you can define whether Stockin transfer/blocked/restricted stocks can be taken into account for MRP run.
2. You can exclude storage locations in MRP run and assign the MRP storage location indicator as 1 in MRP 4 view.
Apart from this the MRP will consider all stocks and requirements.
If you don't want to consider QI stock (for ex) then you can convert them as blocked stocks or you can move to a storage location which is not assigned to the MRP.
Thanks,
JK

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Order type dependent parameters for process order

Hello friends,
In Order type dependent parameters for process order (T.C COR4), there is subscreen for Process data documentation.Inside it we have three options :a) Batch Record Required
b) Order Record Required
c) No Process Data Documentation Reqd.
Through F1 help whatever information i have got regarding them, is not cleared.
According to it, if i select Order Record Reqd, than first of all i will have to delete (archieve) the order record than only i can delete (archieve) the process order.The same is with Batch Record Required.
So according to it if i want to delete the process order than first i will have to delete order record.So guys may i know which order record firstly i have to delete?Than only the system status for process order will not have the status ORRQ (Order Record Reqd).
And one more thing friends,if i select the third option No Process Data Documentation Reqd than which process data documentation system will not create?Or what will happen if i select this third option?
Thankingy you guys in advance.

HI
For process data documentaion pls check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a43ea8461e11d182b50000e829fbfe/frameset.htm
Thanks

Material staging for process order

Dear All,
Can we use material staging for process orders.
If possible pls brief the procedure.
Subbu.

Using warehouse management /WM) :
- Create a control cycle for the component, using LPK1. Here you define if the supply will be specific for the order (when weighing takes place in the warehouse) or for released orders (normallu full packages of components and weighing is done at plant level). Reference to a supply area.
- The resource used in the operation has a reference to the supply area.
- Components have material master views in WM for the selected storage type
Then, when releasing the orders run LP10 - LP12 to generate the Transfer requirements for the raw materials. These TR will be converted to Transfer Orders and Confirmed, so the stock will be moved to your supply area.
Using Inventory Management, none of the above is required. You can use MF60 to move materials from General Storage Location to Shop Floor SLoc.
Regards

Run MRP for multi Plant

Dear all
I want to ask you about running MRP for multi plant based on SAP ECC EHP4.
I have a situation as below:
I have 2 plant are 1000 and 2000. In plant 1000, I create a production order in plant 1000. The component is store in both of plant 1000 & 2000.
So, when I run MRP. Does system will check stock from both plant 1000 & 2000?
Because my company is keeping raw material in 2 plant, and there are one plant have been used for production.
I want you confirm that Does SAP ECC EHP4 can run MRP for multi plant and the system will check stock on multi Plant?
Thanks

Hello,
The scope of planning is used to control whether the total planning run is executed on a multi-plant level
several plants
one MRP area
several MRP areas
a combination of plants and MRP areas.
Here the planning will cover all the material which is relevant for planning in all the above given areas.
You can carry out the total planning run for the scope of planning online or in background mode. The planning run, however, must always be started with parallel processing.
Hope it helps. Please revert back.
Alok Tiwari

Run MRP for process order's requirements only

Similar Messages

Maybe you are looking for