Run Sp_who2 in query manager
Hi all!
Could you tell me how to run Sp_who2 query in SAP Business One or another way?
Thanks!
HI!
There is error when i excute query in SQL.
The error:
*Msg 208, Level 16, State 6, Procedure sp_who2, Line 255*
*Invalid object name 'sys.sp_who2'.*
Please help me!
Thanks!
Similar Messages
-
Operations manager failed to run a wmi query for wmi events (0x800706ba)
Hi everyone,
I've been working on this issue for a while and I am still no closer to finding out what the problem is. If anybody can offer any other advice or things to check, I'm all ears.
I'm running SCOM 2012 R2 with UR2, and the Cluster Management Pack v6.0.7063.0
My problem is on one particular batch of cluster servers where I am getting the following error.
Name: Operations Manager failed to run a WMI query for WMI events
Alert Description:
Module was unable to enumerate the WMI data
Error: 0x800706ba
Details: The RPC server is unavailable
Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
Instance Name: servername.domain.local
Instance ID: {instance_id}
Management group: SCOM_Management_Grp_Name
I am getting this alert regardless of whether I run the Windows Cluster Action Account as Local System, or as a domain user with full local admin privileges on all the cluster nodes.
When looking at the management pack and the workflow in particular (Microsoft.Windows.Cluster.Node.StateMonitoring), I can see that it's trying to access
MSCluster_Node in the root\MSCLUSTER WMI namespace.
This is the workflow for your information...
<UnitMonitor> ID="Microsoft.Windows.Cluster.Node.StateMonitoring" Accessibility="Public" Enabled="onEssentialMonitoring" Target="ClusLibrary!Microsoft.Windows.Cluster.Node" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="ClusLibrary!Microsoft.Windows.Cluster.CheckState" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Cluster.Node.StateMonitoring.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter1>
<AlertParameter2>$Target/Property[Type="ClusLibrary!Microsoft.Windows.Cluster.Node"]/ClusterName$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="Success" MonitorTypeStateID="Online" HealthState="Success" />
<OperationalState ID="Warning" MonitorTypeStateID="Partial" HealthState="Warning" />
<OperationalState ID="Error" MonitorTypeStateID="NotOnline" HealthState="Error" />
</OperationalStates>
<Configuration>
<ClusterObjectName>$Target/Property[Type='ClusLibrary!Microsoft.Windows.Cluster.Node']/NodeName$</ClusterObjectName>
<PollInterval>60</PollInterval>
<ClusterObjectClass>MSCLUSTER_Node</ClusterObjectClass>
<OnlineExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpression>
<OnlineExpressionOnDemand>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpressionOnDemand>
<PartialExpression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpression>
<PartialExpressionOnDemand>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpressionOnDemand>
<NotOnlineExpression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpression>
<NotOnlineExpressionOnDemand>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpressionOnDemand>
<WMIFields>Name, State</WMIFields>
</Configuration>
</UnitMonitor>
I can confirm that I am able to browse the MSCluster_Node class locally, as well as remotely using WMIEXPLORER and WBEMTEST,
however it only works when I set the Authentication Level to
Packet Privacy. If I do not select Packet Privacy, a WMI event log error 5605 is logged on the remote servers application log that says...
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy
and run the script or application again.
I can confirm that all firewalls are turned off, and there are no firewalls between the management servers and the agents in question. AV exclusions have been done and appear to be in place. The nodes are all Windows 2008 R2 with SP1. As
far as I can tell there is plenty of memory available on each of the nodes in question (50%+) of RAM is available.
If I manually run the "Discover the Windows Server 2008 R2 Cluster Components" task in the Cluster Service State section of the management pack in the Monitoring Pane in the console, on the nodes in question - the discovery runs successfully.
Does anybody have any other ideas or suggestions I could try?
Many thanks in advance,
Noel.
http://www.dreamension.netHi,
Common causes of RPC errors include:
Errors resolving a DNS or NetBIOS name.
The RPC service or related services may not be running.
Problems with network connectivity.
File and printer sharing is not enabled.
For more information, please review the link below:
Windows Server Troubleshooting: "The RPC server is unavailable"
http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx#Identify
Troubleshooting RPC Errors
http://technet.microsoft.com/en-us/magazine/2007.07.howitworks.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Results table difference when running query from Alert compared to Query Manager
Hello,
I have following query - Aim is to create alert to tell employee which customers to make visit to in next 4 weeks
SELECT DISTINCT T1.CardName, T1.U_VisitDue, T1.U_VisitReason, T1.U_Priority, T1.U_Region as 'Area', T1.U_VNotes
FROM dbo.OCRD T1
WHERE DateDiff(d,T1.U_VisitDue, GETDATE()) <29
Group BY T1.CardName, T1.U_VNotes, T1.U_VisitDue, T1.U_VisitReason, T1.U_Priority, T1.U_Region
FOR BROWSE
My problem is that when I run query through alert the field U_VNotes is displayed differently.
Running the query from Query Manager the contents of this field appear in one field of the result table.
Running the query via Alery the content of this field is split into several fields in results table according to 'new line' in field entry.
This makes the results table from the Query less 'user-friendly' because if you want to sort the table by 'Date' column for example it makes a mess of the table because of the extra rows.
I want results table to look like top version in picture below ... but i want to run from alert.
Is this possible?
How can I achieve it?
Thanks for any assistance
Regards, KarenHi
check this support note:1774628 The SQL SELECT DISTINCT Statement does not work in ALERTS
Kind regards
Agustín Marcos Cividanes -
Alert: Operations Manager failed to run a WMI query
I am having an issue with my Cluster MP. I am getting a large amount of alerts for "Alert: Operations Manager failed to run a WMI query"
Alert: Operations Manager failed to run a WMI query for WMI events
Source: Server.Domain
Path: Server.Domain
Last modified by: System
Last modified time: 6/10/2014 5:20:40 PM Alert description: Module was unable to execute the notification query.
Error: 0x80041003
Details: Access denied
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
Instance name: Server.Domain
Instance ID: {A7DED311-01E2-927A-A4BF-013D443EBA84}
Management group: SCOM-GroupName
This happens for many workflows. I can not for the life of me find what access is being denied on. Any help would be great.
I have the cluster run-as profile configured to use a domain account as well as the local agent to use a domain account that has administrative rights to the clusters.
Thanks,
SethYes, in a last ditch effort to over come this access denied I made my Action Account a domain admin and configured the agent default account from local system to the domain action account. nothing has worked for me.
-
Operations Manager failed to run a WMI query-Invalid class
Hi Team,
may of the windows 2008 R2 sp1 and sp2 servers getting below SCOM 2012 alert. Please help me to fix the same.
SCOM version : SCOM 2012 R2
Alert: Operations Manager failed to run a WMI query
Source: server Name
Path: server Name
Last modified by: System
Last modified time: 2/6/2014 8:33:22 AM
Alert description: Object enumeration failed
Query: 'SELECT * FROM MetaFrame_Server WHERE ServerName="server Name"'
HRESULT: 0x80041010
Details: Invalid class
One or more workflows were affected by this.
Workflow name: Citrix.PresentationServer.ActiveSessions.PerformanceMonitorFirst try it with WBEMTEST to see what is going with the WMI class. The error you are getting usually means WMI misses that class and you should load the mof again/ maybe rebuild the entire repository (careful as the windows files are all located
on 1 folder, but applications tend to store it in their own folders, like citrix, ibm, etc).
Try to run this command:
mofcomp "<Programfiles>\Citrix\System32\Citrix\WMI\ .Mof file for citrix"
{citrixProv.XP10FR3.mof, metaframeProv.XP10FR3.mof, and mgmt.XP10FR4.mof files}
Then, run the WBEMTest again and the namespace should be returned successfully. Then restarting the health service on agent.
Also you can refer below link
https://support.citrix.com/article/CTX122283
Please remember, if you see a post that helped you please click (Vote As Helpful) and if it answered your question, please click (Mark As Answer). -
Operations Manager failed to run a WMI query -Access Denied
v hosts to 2012 r2, and now we're seeing a lot of "Operations Manager failed to run a WMI Query", With "Object enumeration failed".
Query: 'SELECT Name, State FROM MSCLUSTER_NetworkInterface where Name="our host name
- Management"' HRESULT: 0x80070005 Details: Access is denied.
Our Cluster run-as account is local admin on the hosts beeing monitored.
We've tried rebuilding the WMI database following this procedure:
1. Disable and stop the WMI service.
sc config winmgmt start= disabled
net stop winmgmt
2. Run the following commands.
Winmgmt /salvagerepository %windir%\System32\wbem (I noticed that you have run this command, but I would suggest
that you try it again)
Winmgmt /resetrepository %windir%\System32\wbem
4. Re-enable the WMI service and then reboot the server to see how it goes.
sc config winmgmt start= auto
If the problem remains, then try the following steps to rebuild the repository:
1. Disable and stop the WMI service.
sc config winmgmt start= disabled (note that there is a blank between '=' and 'disabled')
net stop winmgmt
2. Rename the repository folder (located at %windir%\System32\wbem\repository) to repository.old.
3. Re-enable the WMI service.
sc config winmgmt start= auto
4. Reboot the server to see if the problem remains.
but we've had no Luck so far. Any help would be
appreciated!
Regards,
TorbjørnHave you checked if DCOM is enabled, WMI will not be able to connect if its disabled.
Use the steps below to configure DCOM.
Run dcomcnfg.exe
Double-click Component Services
Double-click Computers
Right-click My Computer
Select Properties
Select Default Properties tab
Ensure the "Enable Distributed COM on this computer" checkbox is checked
Default Authentication Level: Connect
Default Impersonation Level: Identify
Next:
Click on COM Security tab
Click Edit Limits under "Launch and Acitvate Permissions"
Make sure Remote Launch and Activation permissions are enabled for the Administrators group
Hope this helps
-Adrian -
How to add drop down list for query manager report in sap business one
Hi Every one,
I need drop down list for parameter selection in sap business one Query Manager.I have two Parameters 'Sales Order','Invoice'.
Please suggest.
Thanks and Regards
DEVHi,
you need to use this :
/*select from [dbo].[OINV] T2*/
DECLARE @Invoice varchar(100)
/*where*/
set @Invoice =/* T2.DocNum */N'[%2]'
you can change the tables and the parameter number but you have to write it exactly that way.
when you run the query within the SBO you will get list of objects ( in this case list of invoices)
hope it was helpful
Shachar -
Here's an interesting problem a client is having. I have a simple query for them that retrieves some information from the primary B1 database, along with a UDT. The query works just fine inside SQL Server Management Studio. When we implement it into the query manager, before saving it, it worked just fine. We then saved it then tried running it again. One of the columns is not visibil. When click the edit button and try running it, it still doesn't work. But when we add or delete whitespace while in edit mode the query works just fine. I haven't been able to find anything on the notes yet and the customer is on 2007A PL 10 but they are planning on upgrading to 8.8+.
Any ideas on why the query manager is behaving this way? Is it a bug thats been fixed in a later patch for 2007A or is it something else entirely?You may add index to U_slsm column.
Update your query as:
Select T0.U_slsm as 'Slsm',
LEFT(T0.Code,9) as 'PC No',
T0.U_date,
T3.CardCode,
T1.DocNum as 'Shop',
T2.DocNum as 'Quote',
T0.U_amount,
T0.U_dm,
T0.U_comment
From [dbo].[@ORDERLOG T0]
Left Join dbo.ORDR T1 on T0.U_DocNum = T1.DocNum
Left Join dbo.OQUT T2 on T0.U_quote = T2.DocNum
Left Join dbo.OCRD T3 on T0.U_CardCode = T3.CardCode
Where T0.U_slsm = '[%0]'
Order By T0.U_date Desc, T0.U_amount
I have doubt regarding your links to those 3 system tables. Are those documents having internal links? -
How to run a search query for a particular folder in KM related to portal
Hi,
Can any one tell me the steps for : how to run a search query for a particular folder in knowledge management related to portal.
Answers will be rewarded.
Thanks in advance.
KN
Edited by: KN on Mar 18, 2008 6:33 AMOk u may not require a coding
But u req configuration
U should first make a search option set
Link: [Search Option set|http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm]
Then u need 2 duplicate a KM Command by the name Search From here
and customize it to include the Search Option that u have created
Link: [Search from here|http://help.sap.com/saphelp_nw04/helpdata/en/2a/4ff640365d8566e10000000a1550b0/frameset.htm]
Then in the layout add this command.
Regards
BP -
Hey All
How I can run query from Query Manager from addon level?
regards
Krzysztof SalaHi Krzysztof,
There is no object in the SDK to access and execute the queries programmatically so you have to use the UI to simulate the user opening and selecting the query (ie activate the menu object for the query you want to run, populate any parameters then click on the OK button to execute the query). It's a bit of a messy solution but it can work ok.
The alternative is to execute your query from within your add-on and display the results in a new form. This form can just have a matrix and an OK button so it's very easy to create (via Screenpainter or at runtime).
Hope this helps,
Owen -
While Executing the Sp in Query manager Getting Error.
hi.
i need a small information.
I Created a small table in Sql
ccode
varchar
no
250
cname
varchar
no
250
ctype
varchar
no
250
My Stored Procedure at Sql
i am inserting values in to the temporary table by using below one after passing the parameter
i am executing the parameter is
EXEC 'cardcode' ,'cardname' ,'c'
if i execute the stored procedure in sql values are inserting same thing i want to do in sap b1 at query maanger
USE [WCTBRPLDB21-05-2014]
GO
/****** Object: StoredProcedure [dbo].[uspGetAddress1] Script Date: 8/1/2014 4:07:20 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[uspGetAddress1]
@Cuscode varchar(250),
@customertName VARCHAR(250) ,
@custype varchar(250)
As
Begin
DECLARE @Cur_Product CURSOR
set @Cur_Product= cursor for select CardCode,CardName,CardType from ocrd where CardCode =@Cuscode and CardName= @customertName and cardtype =@custype
open @Cur_Product
fetch next
from @Cur_Product into @Cuscode,@customertName,@custype
while @@FETCH_STATUS = 0
begin
insert into custupdate (ccode,cname,ctype) values (@Cuscode,@customertName,@custype)
fetch next
from @Cur_Product into @Cuscode,@customertName,@custype
end
close @Cur_Product
deallocate @Cur_Product
select * from custupdate
End
@Cuscode varchar(250),
@customertName VARCHAR(250) ,
@custype varchar(250),
select @Cuscode = T0.CARDCODE from OCRD T0 where T0.CARDCODE = '[%01]' AND
select @CARDNAME = T0.CARDNAME from OCRD T0 where T0.CARDNAME = '[%02]' AND
select @CARDTYPE = T0.CARDTYPE from OCRD T0 where T0.CARDTYPE = '[%03]'
uspGetAddress1 @Cuscode ,@CARDNAME ,@CARDTYPE
The above one i pasted at query manager.
if i run it it is asking the parameters
but after execute it
i am getting the error that must declare the Scalar variable like that it is showing.
but i am all ready giving the scalar variable but it is not running.
Any information plz update me
is there any declaration problem in query manager.....................Try below in query generator:
Declare @Cuscode varchar(250),
Declare @customertName VARCHAR(250) ,
Declare @custype varchar(250)
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @Cuscode = /* T0.CardCode */ '[%0]'
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @customertName = /* T0.CardName */ '[%1]'
/*SELECT FROM [dbo].[OCRD] T0*/
/* WHERE */
SET @custype = /* T0.CardType */ '[%2]'
EXEC uspGetAddress1 @Cuscode,@customertName,@custype
**Don't remove comments
Thanks
Navneet -
Query Manager SQL DateDiff and Parameter Problem
Im having trouble with a date calculation in the Query Manager. Im wondering if anyone has run into something similar.
I am trying to write a query that returns records that are X days old, where X is a parameter input by the user.
Heres an example you can paste this into your system and duplicate the issue:
<b>SELECT T0.DocNum, T0.DocDueDate FROM ORDR T0 where datediff(dd, T0.DocDueDate, getdate()) <= [%0]</b>
Returns a date error code if you try to input an integer (e.g. the "Define Survey Variables" dialog is looking only for date values)
However
<b>SELECT T0.DocNum, T0.DocDueDate FROM ORDR T0 where datediff(dd, T0.DocDueDate, getdate()) <= 30</b>
Works just fine.
Any ideas?> I tried your query and it's working perfection for
> me. I'm using SBO B1 2005 A.
>
> The [%0] in your case is looking for the type of the
> critary and because it sees T0.DocDueDate it thinks
> you should give the query with a date and not a
> numeric. Maybe you cshould try to add a casting
> function to return a numeric ?
Merci Daniel,
I too am using SBO B1 2005 A (PL 22)
I should have expanded on my original problem. I have tried using CAST and CONVERT in the following ways:
<b>SELECT T0.DocNum, T0.DocDueDate FROM ORDR T0 where datediff(dd, T0.DocDueDate, getdate()) <= CAST([%0] as Integer)
SELECT T0.DocNum, T0.DocDueDate FROM ORDR T0 where cast(datediff(dd, T0.DocDueDate, getdate())as Integer) <= [%0]
</b>
also
<b>SELECT T0.DocNum, T0.DocDueDate, cast(datediff(dd, T0.DocDueDate, getdate())as Integer) as Date FROM ORDR T0 where Date <= [%1]</b>
Nothing seems to work (although I could be getting the syntax wrong) -
Query Manager Condition Problem
Dear expert,
In B1 query manager, i found a report called 'Production Order Report' and there is a searching condition which i don't understand.
Code:
T3.CardName= '[%9]' or '[%9]' = ''
If user dose not input this parameter, how the query manager handle the query??Hi Kit,
The query code you mentioned basically says that if the [%9] variable is blank, don't filter on it, else filter on it. You can test it with this query
declare @Code varchar(15)
set @Code= ''
--set @Code = 'C1000'
select * from ocrd where (Cardcode= @Code or @Code = '')
If you run it as is, all records in OCRD will be returned, if you run it with the commented line uncommented it will return only C1000.
Hope it helps,
Adele
<i>PS: I have seen that every post you make you set as answered/solved problem already. Please make sure which problems are solved and which not. People tend to not look at solved posts that often. Every question you asked have been marked as solved before anyone replied. Were they solved?</i> -
Query Manager- Filter List Missing Values in the Filter List.
Hello experts,
We would like your help in the following issue.
We are using SAP B1 9.0 (PL10).
When we run a query report from the query manager in SAPB1, the report results that are displayed contain an extended list of names, starting from A to Z. When we use the filters button in this report, in the filter field with the BP Names the list contains only the names from A to M, and not the rest.
Please advise us, if anyone has faced the same issue.
Thank you in advance,
Vassilios Korolis.Hi,
Please check SAP note:
1012827 - Filter table function displays only up to 499
values
Thanks & Regards,
Nagarajan -
Print Preview for Query Manager
Hi all
When I open up query manager and run a report query it opens up the correct information however when I click on print preview it brings up a window which says print preferences and has a selection of window, table, or selection area. I want the selection to be table permanently.
What I want to know is what do I need to do to skip past that window and take me directly to print preview in the table format?There is no option available to skip the print preferences window or to make the selection to be permanent.
As an alternate, Export the result to Excel and print from there or
Create a Query Print Layout for the Query by clicking 'Create Report' button in the 'Query Manager' window, and print the Query Print Layout by selecting Tools -> Queries -> Query Print Layout
Maybe you are looking for
-
How to include depreciation are in asset master data
I have already activated depreciation area in the asset class but it did not appear inn asset master data. How to include it there? Tks, Naej
-
New report with Painter/Writer
Need some reminder, since was using Painter/Writer long time ago... Standard project reports have an hierarchy window for navigation on the left hand side. Instead of that navigation I would like to have a project id listed in the first column with o
-
Help about error 12 in iTunes, Help about error 12 in iTunes
Hi I'm stuck in recovery mode iPhone 5 when Restore after Error 12 is 70% then the Kindle when it does connect to iTunes again gives error 12 ... Please
-
Our server sends order emails to our clients and have recently (past week) started to bounce back. 213.199.180.150 does not like recipient. Remote host said: 550 5.7.1 Service unavailable; Client host [213.246.109.24] blocked using Blocklist 1, mail
-
SAP TDMS / CCS (for utilities)
The TDMS is compatible with SAP CCS OIl/gas refining industry? Thank you Rogério