Running a series of reports in order

I have several financial reports that need to run in a certain order at the end of every month because some updates occur after a certain report runs. Does anyone know how I can do this? Can one report check to see if another has run?

Hello,
You can put a code in the BEFORE PARAMETER FORM or BEFORE REPORT REPORT Report triggers to check if the update has been done? Or you can put your jobs in a batch run by creating .bat program that runs the jobs one at a time with error check in between so that it will not go through if the first job failed, this is how we do it here at work.
-Marilyn

Similar Messages

Different scenario to run Former XML Publisher report

Hi All.
I have some different kind of scenario to run the XML Publisher report. Please look into the following scenario and requirements:
In my current project we are implementing 22 languages like Chinese, Japanese, Spanish etc. Out of these 22 languages, 8 languages will be installed and 14 will be uninstalled. We are defining the language on 2 places: OU level and Address level. For those reports that need to be translated, we are using XML Publisher to achieve this, but we have different scenario to pass the language, in order to select the corresponding template.
Scenario: As i mentioned we are defining the languages on address level, it is considered that the language defined at the address level will be customer's preferred language and he would like to see the output in that language only. there are 2 possible conditions while running the report: 1. User may select the language in which he want the report to be displayed in. 2. User may not select any language. The 1st scenario can be fulfilled by standard functionality. but in case of second scenario when user does not select any language then we need to display the report in language defined on address level for that customer. For Ex: if the Invoice report is running for 4 invoices and have 2 different customers and their preferred language is different, suppose for 1 customer it is Chinese and for another one it is Japanese. Then we need to display the output in customer's preferred language only i.e for Japanese customer it should be in Japanese and for Chinese customer it should be in Chinese i.e 2 different templates will be applicable.
So as per this while submitting the concurrent request we need to check whether user has selected the language or not? And after making all the conditions check we will have to submit the xml publisher report using API. Do you have any suggestion how can we achieve this task?
Please suggest.
Thanks,
AS

Hi AS,
How about using a conc prog parameter for User selected language, and XML element data at customer level, then call a subtemplate (or multiple embedded regions in the same template) in the required language based on if or case logic in the template.
Regards,
Gareth

FS10N Report layout Order and Asset not display

Hi Expert,
while run T.Code FS10N , we need Order and Asset details from standard layout after select and copy and execute it.. Order and Asset value not showing.. it showing blank field, while Asset Number and Internal Order also there . in Capitalized on Asset GL A/c.
Kindly help in this regard.
Kind regards
Pranav Kr. Gupta

Pranav,
you entered in FS10N and hit twice to get details, then you are in line item report from FS10n similar to FBL3n. In this report you display only what you have in line item screen. You don't have Cost Object in this instance since this line item is balance sheet account.
You have to develop a report which fetches from PO tables
Check below transaction and enter you document number in dynamic selection:
S_ALR_8701228
Here you can see differences among line items and cost assignment.

FSG Reports : Row Order Error

I am currently re-writing a number of FSG's in 11i and intend to use the expand option in the row set.
Having done this I then assigned a Row Order listing 'Value & Description' but the report errored. The report runs succesfully for 'Value Only' row order, but anything involving the account description seems to fail. i.e the report concurrent request has a status 'Error' with nmo output file to view.
I have checked column widths etc which seem fine and am now running out of ideas.
Any help would be appreciated.
Thanks
Gary

Hi Gary,
Can you please describe the exact error message with the error number which is shown in the output.
Also have you tried running the report with
"Description only" option.
Thanks,
Raj..

Run single, consolidated AWR report on 4 adjacent snapshots?

We typically collect snapshots in 60 minute periods for our instances. Recently, a customer ran a test for 3.5 hours. I created an ADDM report spanning the 4 snapshots (useful). However, being able to generate an AWR report for the same 3.5 hour duration would add additional insight.
Currently, I can generate 4 separate AWR reports, one for each hour. However, I'd like to be able to create a single, consolidated AWR report. This way, I don't have to manually sum useful numbers like Executions contained in 4 separate AWR reports for SQL ordered by Elapsed Time, etc.
Can I create one, aggregated AWR report? Or is my only other option to revise the snapshot collection duration before the next scheduled load test occurs (e.g. to 3.5 hours for a 3.5 hour load test)? Would prefer not to have to do this. But is it the only available option to accomplish what I need?
Thanks very much.

Thanks Rob. I'm able to run an ADDM report for the 3.5 hour duration I need. No problem there. I want to run a consolidated "AWR report" on multiple snapshots, e.g:
Performance > Snapshots > Click a snapshot ID > Click Report tab (by default you are on the Details tab).
This AWR report gives a lot more information than an ADDM report.
Can I select multiple snapshots for the AWR report? I'm already doing so with ADDM reports.
The title for the "AWR" report I'm interested in is: "WORKLOAD REPOSITORY report for." It doesn't have ADDM findings in it because it's not making recommendations--just reporting a large amount of snapshot details.
I'm guessing now that the answer is "no" to what I'm asking. Hope this makes sense.

On the Apple webiste, I read that you must run OS 10.6.8 in order to sync the iPhone 5 with the computer. However, in the tech specs on the "Buy the iPhone now" email I received at my .me email address, it list the OS sytem needed as 10.5.8. Which is it

On the Apple website, I read that you must run OS 10.6.8 in order to sync the iPhone 5 with the computer. However, in the tech specs on the "Buy the iPhone now" email I received at my .me email address, it listed the OS sytem needed as 10.5.8. Which is it?

In Reply to all fellow Apple fans: It is great that someone found a work-around to the iTunes 11.4 no syncing problem. I think that is fine for the short term. And I am really glad that we customers have a forum to share information and experiences regarding Apple's products. However, as someone here said, we are all customers; and posting a problem here "IN HOPES THAT APPLE READS THESE POSTS" is NOT a way to resolve this issue or any issue.
PLEASE CONTACT APPLE: Apple Service Center: 1-800-275-2273 - Once you get a ticket number then and only then is this documented and then Apple can follow-through and alert the engineers who will fix this.
The "CWA2" work-around band-aid does several things in addition to reverting back to iTunes 11.3.1. :
1) It ensures that Apple continues to know nothing of the problem.
2) It ensures that the faulty code that is within 11.4 remains there and is perpetuated into future versions.
3) It ensures that YOU can never upgrade to future versions. (If the resident faulty code remains and perpetuates)
So once you have reverted back to 11.3.1, the problem APPEARS to have gone away (FOR YOU) but you have not solved the problem.
Again, respectfully,
1) Sending feedback to apple (using the "Report Bugs To Apple" menu item in Safari will get the information to someone, somewhere and add it to the pile of issues, complaints, suggestions, etc.
2) CALLING the Apple service/support Center at 1-800-275-2273 will put you in touch with a real APPLE person who will begin the process of documenting and forwarding this issue on to those who will fix it.
and
3) emailing Apple directly will make sure that they get the information.
lets get this fixed !!!!!!!!!

WWI server problem with report shipping order

Hi everybody,
we have a problem with the WWI server and report shipping orders for Inbound documents (PDF):
after we created an entry in CVD1 and using buttons "Accept" and "Ship immediately" we run the report RCVDEVEN. First time we did it the WWI server started working and ended with error but assigned the correct PDF. After that, the WWI server didt start anyway.
First error message:
The description for Event ID ( 91 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: PRD.
Second error message after second attempt:
The description for Event ID ( 95 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 09/14/09 17:59:49 Start Function 'WWI_SERVER_INFO'
Initializing parameters
Initializing Tables
Receiving data from client
Sending data to client
Elapsed time : 0.1 sec.
OSS note 1058521 has already been found - but nothing described here is relevant for us: the RFC connection is working, the WWI monitor shows the server up and running.
Any ideas?
Thank you very much in advance and best regards,
Christoph

Hi folks,
fixed the problem myself. There have been some documents with error in the printer queue of the WWI server.
Best regards,
Christoph

A better way to run a 7 day report?

Using Crystal Reports 11
I am hoping there is a better way of running a seven day report that i have to run weekly
In the report i have it set when refreshing the document, the "Prompt for new parameter values" comes up and there is a date field for start and end
This is how i did it
I made a formula called "Date" this comes from the closed date of our accounts
I made a Parameter Field "Start Date" with the TYPE field is "Date"
I made a Parameter Field "End Date" with the TYPE field is "Date"
I made a Select Expert Using data from the "ClosedDate" in the first drop down I picked "Formula" and used this as the formula
{WH_ACCTCOMMON.CLOSEDATE} in {?Start Date} to {?End Date}
Two things
1. Is there a way to have "Prompt for new parameters values" as the default checked off box when clicking "Refresh"?
2. Is there a way to only enter a start date and the refresh would just run 7 days without entering a end date?

Hi,
Here's a suggestion for question 1:
When you preview the report for 1st time there is no prompt window that asks you to select whether you wish to 'Use current values' or 'Prompt for new values'.
If the Preview window is open and you hit refresh again, this is when you get the pop-up with the above options. If you close the Preview window and refresh again, you would not get a pop-up and it will show the Prompt window instead.
For question 1, you can follow Alun's sugestions.
-Abhilash

Report Internal Order needed - showing Plan and Budget Values?

Hello,
I want to create a report (Report Writer/Painter) which shows for example in one column the planned values and in another column the budget value of an order group.
I know the standard reports S_ALR_87012993 - Orders: Actual/Plan/Variance and the other standard report S_ALR_87013019 - List: Budget/Actual/Commitments.
My question: Is it possible at all to have these both values plan and budget by order/order group in one report? - Or it is not possbile because these values are stored in different tables and different libraries?
If it is possible with Report Writer, I would be very glad - if not, is there any other chance (e.g. individual programmed report)?
For any comments or hints thank you in advance.
Regards,
VCG

HI,
both are report painter reports for libraries 6O1 and 6O2 which are based on reporting tables CCSS and RWCOOM.
Try to find all value fields that you need in 6O2 / RWCOOM as this is the "big brother" of 6O1/ CCSS.
Best regards, Christian

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?

Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Can I run a BI Publisher report from interactive report

Hi,
I have an APEX interactive report and want to run a BI publisher report by clicking on a column value within the interactive report. Is that possible?

Hi 918900,
This is possible.
Set the column in the interactive report as link to page 0 with the report name in the request field
PRINT_REPORT=<your report>. Don't forget to specify the Display type for the column as 'Standard Report Column'.
Geert.

App File Server connection error when trying to run a BI Publisher report..

hello Gurus...
As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
What does our DBA need to do..?
error message reads..
Template code: SUARXASR
Template app: AR
Language:      en
Territory:     GB
Output type:   EXCEL
[5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
many thanks for looking..
Steven

nobody experienced this before..?

Error when trying to run "Program - Publish FSG Report"

We're using 11i (11.5.10.2) version
I am trying to run 'Program - Publish FSG Report' but receiving the following error message in the View log file on "Financial Statement Generator (XML Report Publisher)".
XML Report Publisher 5.0
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
     at java.lang.reflect.Method.invoke(Method.java:611)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:473)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:188)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1497)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:913)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:1766)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1277)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Caused by: oracle.xdo.parser.v2.XMLParseException: End tag does not match start tag 'fsg:RptLine'.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
     at oracle.xdo.parser.v2.XMLReader.popXMLReader(XMLReader.java:526)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1287)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
     ... 16 more
Ref Publish FSG: Error: XML: XDOException, End Tag Does Not Match Start Tag [ID 339009.1]
I tried to apply the patch#12700905, then retest the issue, but I receiving the following error message in the output file on "Program - Publish FSG Report"
DECLARE
ERROR at line 1:
ORA-06550: line 133, column 8:
PLS-00306: wrong number or types of arguments in call to 'SUBMIT_XML_REQUEST'
ORA-06550: line 133, column 5:
PL/SQL: Statement ignored
Has anybody can help me?
Thanks
Sam

Hi Sam.
You will need to apply Patch 5728162 . To see the complete solution see MOS Doc ID 787396.1
Hope this helps.
Octavio

Help needed to report open orders from R/3 SD!

Hello all,
I need to report net open order value from SAP R/3 SD to BW. I'm using cube 0SD_C05 to report inquiry vs. quotation vs. orders. Is there any standard ods object in business content which can be used to report open orders? If not, will it be a good idea to create a ODS object and use it directly for reporting open orders? This BW installation is for a small IT company and we don't generate a lot of quotations or orders on a daily basis. Please guide.
Thanks and Regards,
Sumit

hi Sumit,
check if you can use 0SD_O01 - order item data
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/2b4f815f153014e10000000a114e5d/content.htm
other business content ods objects are 0sd_o02-05.
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/f5cc3c7dea9006e10000000a114084/frameset.htm
(expand left side 'ods')
hope this helps.

Running a series of reports in order

Similar Messages

Maybe you are looking for