Running applet as RMI client from remote computer

Hi,
I am doing this project that requires that i run an applet (which is an RMI client) from a computer different than the one that has the RMI server running.
Right now, i can run my server and applet on the same computer and it all works fine. But i don't know how to make the applet communicate with an RMI server that resides on another computer. Does this has anything to do with TOMCAT.
I was wondering if this is possible.
Thank you in advance.

Do This
RemoteInterfaceName server = (RemoteInterfaceName) Namin.lookup("rmi://yourserver/server/YourServerName");
server.methodName(args);
suppose you have your server in the dir path
c:\prj\server
then set your webserver's root dir to c:\prj\server how this is done will be in the web server's documentation
Try It otherwise we'll see it again
Bye !!!

Similar Messages

Error in calling EJB Client from Remote Machine.

While running the client from local machine, it works perfectly.
But when I try to run the same client from remote machine it gives me the error.
I deployed the ejb in sun server 1.4 with jndi as "xxx.xxx.xxx.xxx/MyTemperature".
Following is the code snippet from the clint.
Context initial = new InitialContext();
          Object objref = initial.lookup("192.168.0.20/MyTemperature");
          home = (TemperatureHome) PortableRemoteObject.narrow(objref, TemperatureHome.class);
          Temperature degreeConverter = home.create();Following is the error
E:\EJBRemoteTest>java TempClient.TemperatureClient
May 14, 2008 10:00:24 AM com.sun.corba.ee.impl.legacy.connection.SocketFactoryCo
nnectionImpl <init>
WARNING: ORBUTIL.connectFailure
org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed: No
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1739)
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1757)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:74)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.
createConnection(SocketFactoryContactInfoImpl.java:77)
        at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.begin
Request(CorbaClientRequestDispatcherImpl.java:152)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaC
lientDelegateImpl.java:121)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClie
ntDelegateImpl.java:214)
        at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
        at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java
:69)
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:58)
        at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:126
        at javax.naming.InitialContext.lookup(InitialContext.java:347)
        at TempClient.TemperatureClient.main(TemperatureClient.java:17)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection ref
used: connect
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:520)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:58)
        ... 10 more
Caused by: java.net.ConnectException: Connection refused: connect
        at sun.nio.ch.Net.connect(Native Method)
        at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
        at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:511)
        ... 11 more
Caught an unexpected Exception!
javax.naming.CommunicationException: Can't find SerialContextProvider [Root exce
ption is org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed: N
o]
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:66)
        at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:126
        at javax.naming.InitialContext.lookup(InitialContext.java:347)
        at TempClient.TemperatureClient.main(TemperatureClient.java:17)
Caused by: org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed:
No
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1739)
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1757)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:74)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.
createConnection(SocketFactoryContactInfoImpl.java:77)
        at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.begin
Request(CorbaClientRequestDispatcherImpl.java:152)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaC
lientDelegateImpl.java:121)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClie
ntDelegateImpl.java:214)
        at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
        at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java
:69)
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:58)
        ... 3 more
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection ref
used: connect
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:520)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:58)
        ... 10 more
Caused by: java.net.ConnectException: Connection refused: connect
        at sun.nio.ch.Net.connect(Native Method)
        at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
        at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:511)
        ... 11 moreThis is a stateless session bean.
Can anybody provide me solution for this
I also tried with java.util.Properties class but result is same.

You are running on Windows 9x or Me, right? The darn OS has 300 or so bytes allocated for environment by default.
Try setting the Initial environment to 4096 in the Properties|Memory tab for the batch file. That will get rid of "Out of environment space". The syntax error is another matter; Windows (except NT and derivatives) shells do not allow '=' in an environment variables value. You cannot overcome that. Some software (Sybase for instance) interprets # as = just because of that. Unfortunately, the JVM doesn't take such an approach.
Better, grab copies of Unix utilities for Windows (www.gnu.org) including the wonderful shell 'bash' and write .sh scripts, which are inherently more powerful.

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HT1926 iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

What does the error message say when you install iTunes and it fails?
This post was edited by Malignance

Executing powershell script from remote computer using RSAT

Hi.
I want to execute powershell script on AD server from remote computer (in the same domain). I installed and tested RSAT - it is working fine. But i cant execute PS from c# code.
ps.Commands.AddCommand("Import-Module").AddArgument("ActiveDirectory");
ps.Invoke();
ps.Commands.AddCommand("Get-ADOrganizationalUnit -Filter 'Name -like \"*\"'");
var res = ps.Invoke();
And i get exception:
An unhandled exception of type 'System.Management.Automation.CommandNotFoundException' occurred in System.Management.Automation.dll
Additional information: The term 'Get-SBNamespace' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.

Hi
CapitanPlanet
For the
CommandNotFoundException, it means the command cannot be found.
On the other hand, your issue is about the PowerShell, if you still have the issue, I suggest that you should post it in the
PowerShell forum for efficient response.
Here are some useful information, please check
Powershell
commands from C# not working (System.Management.Automation.CommandNotFoundException)
Powershell, Service Bus For Windows Server Programmatically: Command found, module could not be loaded
https://msdn.microsoft.com/en-us/library/dn282152.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Get-DfsrBacklog cmdlet doesn't work from remote computer (pssession)

Hi there!
I try to manage our Server 2012 R2 boxes from a Windows 7 remote machine using PowerShell. For some reason the cmdlet "Get-DFSRbacklog" seems not working remotly. The same cmdlet work when logging in locally to the server(s) with the
same credentials. UAC is turned off on the target machines and i have local admin permissions on this servers using my domain account.
What i do is:
Enter-PSSession <servername>
Get-DfsrBacklog -SourceComputerName <servername> -DestinationComputerName <servername>
Then i receive the following error:
Get-DfsrBacklog : Could not retrieve the backlog information. Replication group: "*" Replicated folder: "*" Source
computer: <servername> Destination computer: <servername> Confirm that you are running in an elevated Windows PowerShell
session and are a member of the local Administrators group on the destination computer. The destination computer must
also be accessible over the network, and have the DFSR service running. This cmdlet does not support WMI calls for the
following or earlier operating systems: Windows Server 2012. Details: WinRM cannot process the request. The following
error with errorcode 0x8009030e occurred while using Kerberos authentication: A specified logon session does not
exist. It may already have been terminated.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or
use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config.
    + CategoryInfo          : ProtocolError: (zursf1003:String) [Get-DfsrBacklog], DfsrException
    + FullyQualifiedErrorId : Get-DfsrBacklog.CimException,Microsoft.DistributedFileSystemReplication.Commands.GetDfsr
   BacklogCommand
Any ideas?

This article
suggests that you're logged into your Win7 management machine with local credentials. You should try the Get-DfsrBacklog command with domain credentials:
Client is in a domain: Attempting to connect to a remote server by using implicit credentials that are the local administrator's credentials on the client. Instead, use domain credentials that are recognized by the domain of the target server, or right-click
the server entry in the Servers tile, click Manage As, and then specify credentials of an administrator on the target server.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

JDBC connect from remote computer fails

Hi all,
I have successfully installed the XE server and I can connect over JDBC from clients running locally on the machine where the XE server is installed.
However when I try to connect from a remote computer using the same client I get an error saying: The Network Adapter could not establish the connection
I can ping the machine with XE installed and all firewalls on the machines are turned off.
Any ideas on the subject of JDBC remote connect to XE server? Or is it simply that it is not supported?
Appreciate all the help I can get.
Thanks,
/Anders

On my machine I have the listener bound to local interface.
Listener.ora has hostname in it, and this is the listener status:
As status shows the hostname is resolved to localhost, on this machine I am unable (with this configuration) to share the db to other machines (I do not have oracle client on my other pc, but telnet is unable to connect to port 1521).
Changing hostname to ipaddres solves.
[andrea@bones ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Beta on 15-DEC-2005 21:28:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bones)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Beta
Start Date                15-DEC-2005 21:28:40
Uptime                    0 days 0 hr. 0 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
[andrea@bones ~]$

Connection doesnt work from remote computer

Hi
I have Oracle XE installed on a computer and my application (Excel application, VBA code) is working well with oracle xe.
i want to run the application from a remote computer.
I opened my application on a rempote computer and it could not connect to oracle xe..
I installed the Oracle XE client on the remote computer but still the application cant connect to the oracle server from the remote computer.
this is my connection string:
sCon = "Provider=MSDAORA;Data Source=xe;User Id=myUser;Password=myPw;"
the computer on which oracle xe express is located is called "Hagar1".
how can i connect to the oracle from the remote application?
thanks,
Hagar
Edited by: user641508 on 04-Dec-2008 10:26
Edited by: user641508 on 04-Dec-2008 10:27

the remote client doesn't know how to get to hagar1, simplest fix is add the entry to the tnsnames.ora file, run a tnsping hagar1 to find the location of the client oracle_home/network/admin/tnsnames.ora file and add:
hagar1 =
   (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = xe_hostIP_or_name )(PORT = 1521))
    (CONNECT_DATA =
      (SID = XE)
)Edited by: clcarter on Dec 6, 2008 10:53 AM add code tag

Invoke command line from remote computer

Hi everyone, I'm new for abap, I have a problem need to be solved. the problem can be describe like this:
I have a text file ("abc.txt" for example) from an application server. I need to upload that file to another Win 32 computer, which already has a program "PGP Command Line". From application server, I need to call a command to encrypt abc.txt file. THe problem is that I don't know how to invoke a command of Win32 server from my computer. I think 'SXPG COMMAND EXECUTE' can not help much because it cannot run command from remote server.
Anyone have any idea?
Thank you in advance.
Regrad,
Long Le Hoang

Sure, using the exec method in the class Runtime. You have to be careful with it though...
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Cannot log into T61 from remote computer with wired network and Windows Explorer.

Hi,
I am using a T61 7662-cto with Windows 7 Professional
When the T61 is connected on the home network with the wired network, I am not able to log into it remotely from another computer. On my second computer, I see the T61 with Windows Explorer but instead of getting the login window, it appears a Network Error with the message:
“Check the spelling of the name. Otherwise, there might be a problem with your network.” With a error code 0x80070035, “The network path was not found.” I tried the “Diagnose” button but it doesn’t give solution.
When the T61 is wireless connected, there is no problem. I can access it from my second computer.
I never have problem to connect to the second computer from the T61 with any connection type . I just updated the Intel Wireless LAN (bg, abg, abgn) for Windows 7 – ThinkPad, with the drivers required but it changes nothing.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73611
Do you have a hint for this issue why the wired network gives problem?
Thanks

Open this post, go to the flagged message. On its right is a button
to turn off the flag.
I went to the site. The only problem I had was one has to sign in
to see anything. Even the main page had a very large ''Please
Sign In'' covering the window.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Running a non mandatory program from remote using powershell without a logged in user

Hi all,
is there a way to execute a non mandatory program (a task sequence in my case) from remote using powershell
without a logged in user on the target system?
I have the following code:
$ProgramObject = Get-WmiObject -Class CCM_Program -Namespace "root\ccm\clientsdk" -ComputerName $ComputerItem | Where-Object { $_.Name -match "$ProgramName" }
Invoke-WmiMethod -class CCM_ProgramsManager -Namespace "root\ccm\clientsdk" -Name ExecutePrograms -argumentlist $ProgramObject -ComputerName $ComputerItem | Out-Null
Works like charm, but only with a user logged in on the target system what is not a good solution for me.
I saw some other ways on the internet but these only work when the program is mandatory.
Is there a way to archive what I need ?
thanks

Hi,
If you deploy the program as a available deployment, there need a user to run the program. Otherwise, the program will never run. This is contradicted with your requirement(run the program at log off).
So I concur with Peter.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

High Screen resolution from remote computer?

Is there any way to dictate what resolution you want the remote computer to be when you display it on your own computer?
It seems the biggest I can get the remote computer to show up on my computer is the highest resolution it shows inside the DISPLAYS preferences on the remote machine ...?

Its seems odd. I have my G5 as a headless machine ans the video card can support 2 30" Cinema Displays, but all I get for resolution choices is 1024x768 max. If I plug one of my Cinema displays into the G5 then I can increase the resolution, unplug it, and have the higher resolutions available in my now headless G5. Of course, if I reboot it, I am back to 1024x768.
Bummer.

How to run executable jar on client machine remotely?

Hi,
I have developed PHP web application that uses Java in the background. The problem that I want to solve is to start Java application (executable jar) on client machine.
Is there any idea how to solve this problem?
Zoran

found it:
in the Group Policy Management Editor go to Computer Configuration > Policies > Administrative Templates > System > Logon > Run these programs at user logon, and add the path (on the local computer) to the script to be run when any user logs
in. Powershell scripts need to be called from a .vbs script like this in order to prevent window popup:
Dim objShell
Dim cmd
Set objShell = CreateObject("Wscript.Shell")
cmd = "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -nologo -noProfile -NonInteractive -ExecutionPolicy bypass -File c:\mypowershellscript.ps1"
objShell.Run cmd,0
As for distributing the scripts, that's a work in progress... GPP?

Removing Sync from remote computer no longer in my control

I had Firefox Sync running on a computer I no longer have access to. FF was probably version 4.x installed under a personal Windows 7 login that might be accessible to the current users of that machine (a floating desk that sees a lot of different temporary workers). On my main computer at home--following the posted instructions in the forum and elsewhere--I have generated and saved a new Sync Key and then I Reset Sync using the option to "Replace all other devices with this computer's data". Firstly, those instructions seem backwards.
Will my old computer (which I can't access) still have all the original synced data on it? Or by the fact that it won't be able to "re-" sync (new sync key generated) it won't have access to that data such as passwords, etc.? I'm concerned that because I reset my key it seems that I've essentially broken the 'linkage' between the two computers. Therefore, by replacing my data ''after'' I generated a new sync key, did I miss an opportunity to overwrite the former computer with data that I would have wiped from Firefox on my main computer (and then have used the ''replace all data'' function)?
Alternatively, would deleting my sync account have any effect on that former machine at this point?

What happens when you sync photos from the new computer?
The albums should be deleted when you do this.

Cannot connect to DB from remote computer (ORA-12545)

Hello all,
Please help, I am stumped. I am trying to connect to a database located at my work from at home.
I am running into the following issue (see command and error below):
ansichart@ansivm:~/src/perl$ sqlplus aspxdba/********@aspxp2
SQL*Plus: Release 11.2.0.3.0 Production on Thu Jul 18 21:15:09 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Here is my tnsnames.ora file (I have the service_name censored out for privacy reasons):
ansichart@ansivm:~/src/perl$ cat $ORACLE_HOME/network/admin/tnsnames.ora
aspxp2 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = orarac9-scan)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = *****************)(UR=A)
I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
ansichart@ansivm:~/src/perl$ nmap -sT -p 1521 orarac9-scan
Starting Nmap 5.21 ( http://nmap.org ) at 2013-07-18 20:53 CDT
Nmap scan report for orarac9-scan (10.1.13.115)
Host is up (0.0088s latency).
PORT     STATE SERVICE
1521/tcp open oracle
Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds
ansichart@ansivm:~/src/perl$
I have another terminal opened up to a server at work and I can connect to the DB with sqlplus just fine. I verified that the record for this database on the tnsnames.ora file is the same as it is at work.
In conclusion, I can connect to the Database at work, but I cannot at home, even though I am using the same connection information and verified that port 1521 is accessible on this Database server from at home. So why can't I establish a DB connection?
Any ideas?
Thanks,
Ben

676d3153-d812-4300-9e6a-b1dc87a2ebfe wrote:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
This simply means "hostname unknown". In other words, the hostname used for the connection could not be resolved to an IP address.
I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
You are verifying hostname orarac9-scan only. You are not verifying that the hostname supplied by the Oracle SCAN Listener can be resolved by your platform.
As you are connecting to a SCAN listener, it will do its magic (load balancing/round robin/whatever) and return a redirect to your client driver - telling it where to find the service name the client requested.
So your client driver gets a hostname and port in return. It then attempts to connect to that to establish your Oracle client-server session. If the RAC has been setup with the typical RAC hostnames, your client will get hostnames like orarac9-vip1 and orarac9-vip2 returned. Likely as FQDN too.
This means your platform needs to be able to resolve these hostnames. It does not. Thus the error.
In your platform's /etc/hosts file, define the complete list of RAC hostnames (SCAN, Public and VIP hostnames).

Running applet as RMI client from remote computer

Similar Messages

Maybe you are looking for