Running Sproxy from ECC 6.0/ SAP NW 7.0 - BI service pack 16

We have ECC 6.0 / SAP Netweave BI 7.0 sps 16
I want run Sproxy, after this new service pack I could not figure out how to run SPROXY by giving oue own data.
Earlier I have use dSPROXY, when I run it ask for Generate XML template, i could paste the data from previous run, now I could not paste the data .
IS there any other way, we can fill the XML template generate data.

> We have ECC 6.0 / SAP Netweave BI 7.0 sps 16
It should be PI 7.0 not BI 7.0. Correct??
> I want run Sproxy, after this new service pack I could not figure out how to run SPROXY by giving oue own data.
Couldn't understand this???
>
> Earlier I have use dSPROXY, when I run it ask for Generate XML template, i could paste the data from previous run, now I could not paste the data .
>
Couldn't understand this too.
> IS there any other way, we can fill the XML template generate data.
Your question is not clear, plz write clearly then it is possible to suggest any solution.
Regards,
Sarvesh

Similar Messages

I have a 4th gen ipod nano which will not sync after restore. i have run itunes diagnostics and attached thMicrosoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)e results. can you help please?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Sony Corporation VGN-NS20E_P
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACE4032C3EC8
Current user is not an administrator.
The current local date and time is 2012-05-26 22:17:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {78DA402D-66EE-4084-9D5E-8A010E0B8437}
Description: Atheros AR928x Wireless Network Adapter
IP Address: 192.168.2.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Sat May 26 19:10:42 2012
Lease Expires: Sat May 26 19:10:41 2012
DNS Servers: 192.168.2.1
Adapter Name: {C1458549-CA0B-4A3B-8F8E-9259653AA0DD}
Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-26 20:57:29.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
JULES'S IPO, iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: YM839W553QU
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number: DNWH3R84DTD2
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Access Material Master from ECC 6 via PI

Hi everyone,
I am very new with SAP PI. I hope someone here could give me a guidance. I am trying to access the material master data from ECC 6 via SAP PI using web service. Is there any document for step by step instruction that I could follow?
It is much appreciate that someone could give me some hints.
Thanks,
Chris

Hi,
Check this link IDoc To Web Service Scenario
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
There is no weblog on IDOC to webservice. But u can have a look at blogs on RFC to webservice.
Then using above given Steps + weblogs u can build ur scenario.
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Thanks!
Edited by: monica bhosale on Aug 26, 2011 10:08 AM

Running OBIEE 11.1.1.7 with SQL Server 2008 R2 Service Pack2

I have check with Oracle on this and Service Pack 2 is not officially supported, but I would like to see if there is anyone out there running OBIEE 11.1.1.7 with SQL server 2008 R2 Service Pack 2? We are currently running 2008 R2 but without the service pack. Our Oracle team would like upgrade to SP2. If you have run sp2, are you encountering any issues, i.e. performance.

I have check with Oracle on this and Service Pack 2 is not officially supported, but I would like to see if there is anyone out there running OBIEE 11.1.1.7 with SQL server 2008 R2 Service Pack 2? We are currently running 2008 R2 but without the service pack. Our Oracle team would like upgrade to SP2. If you have run sp2, are you encountering any issues, i.e. performance.

Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

Dear all,
We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
Other system release
CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
Regards,
Ajay

Hello
The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
Best regards
Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
1388258 - Version Interoperability within the SAP Business Suite
In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0.

How to Populate Values from ECC to SAP SRM

Hi Freinds,
we have two custom fields in Purchase Requisation ( ECC ), my requirement is to same fields i want to create in SC Item Tab, i have included in tem Tab, but now i want to populate the values from ECC to SRM, can any give me idea how to do this
Thanks
Kumar Srini

Hi,
You need to create two custom fields in the shopping cart corresponding to the two fields in purchase requisition.
After that, you need to map the two fields in ECC to SAP SRM. In srm spro settings, you can find the mapping options.
regards,
Ranjan

Can we transfer customer master from ECC to SAP AII

Hi Experts,
We need to transfer the customer master data from ECC to SAP AII ( Auto-id system ) through XI system. There seems to be no std XI content for doing this ( there is std content for sending material master ). I have found out an idoc type BUPAFS_FS_CREATE_FRM_DATA201 in both ECC and SAP AII system. I think I can use this idoc for transferring the customer master. But how do i triggere this idoc whenever the cusotmer is created or chnaged?? ( like for MM we have BD10 transaction to do this )
thanks
sankar

Hello,
I do not get what is the sending message type and what is the receiving message type.
The MaterialIn Message Type in AII is used when you do replicate material master data from ERP to AII.
In ERP You sent IDOC Matmas01 or AINMatmas ( I am not exactly sure about the name, but it is contained in the configuration guide for flex delivery scenario.
When in this replication the gtin field is not populated.
Check the following:
open master data -> product in AII and check if you do have a table containing UOM and GTIN displayed for existing product or that you can create your own product and defining UOM and gtin for that.
If this is not possible, you have not maintained the relevant set type and product configuration in AII. This is stated in config guide again.
Michael
Now I will be off for two weeks with no access to internet. Hope that helps.

Options for loading data from legacy mainframe to SAP CRM and ECC

Hello All,
I am new to SAP.
As part of data conversion planning from legacy mainframe to SAP CRM and ECC systems, I need to know the different tools available for loading the data and comparative analysis of the tools by showing the features. Please also describe the process to evaluate the tools (prototyping, technical discussions etc) and make the recommendations.
I would also appreciate any information on testing tools like (eCATT) and any third party tools (like Informatica)
I know I am asking for lot of things here. But, I really appreciate any information reagrding this.
Thanks,
Balu

Hi
Data Migration(Conversions) mainly involves the following Major Steps
Discovery->Extract->Cleanse->Transform->Load
Discovery-> Involves identifying various source systems available where the actual data is residing.
Extract->Extract the data from the source systems(legacy systems)
Cleanse->Cleanse the data by enriching it,De-duplications etc
Transform->Transform the data into SAP Loadable format
Load->Upload the data into SAP Using the Load Programs(Eg,BDC,LSMW,Data Transfer Workbench,BAPIs etc)
Also i would request you to visit http://www.businessobjects.com/solutions/im/data_migration.asp
Cheers,
Hakim

SAP Upgrade from ECC 5.0 to ECC 6

Hello All,
We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
Thanks in advance for your response
Anirban

Hi,
It has to be manually done for each and every program.
Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
Regards,
Subramanian

SAP ECC 6.0 service pack level upgrade from 15 to 18 impact on SAP SRM 5.0

Hi All,
What all needs to be tested in SAP SRM when we upgrade SAP ECC6.0 service pack level from 15 to a8.
I am already facing issue in BBPGET VD and HR Interface with SAP SRM.Workflow issue while testing in EBQ.
Kindly let me know is anythings needs to be tested.
Regards
Vivek.

Hello,
There are no known issues related to ECC 6.0 support package upgrade when this system is integrated with SRM 5.0.
Since SRM 5.0 is fully supported with ECC 6.0.
Regards,
Ricardo

Extract Tables/views into ECC 5.0 SAP system from Non-SAP system

Hi,
I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?

maybe you can access sap data using some connector such as java or .net connector.

Best practice data source from ECC 6.0 for legal consolidation in BPC NW7.5

Hi there,
after scanning every message in this forum for "data source" I wonder if there isn't any standard approach from SAP to extract consolidation data from ECC 6.0. I have to say that my customer is not using New g/l so far and therefore the great guide "how to get balances from ECC 6.0 ..." does not fully work for us.
Coming from the old world of EC-CS there is the first option to go via the GLT3 table. This option requires clever customization and the need to keep both GLT0 and GLT3 in line. Who has experiences regarding maintenance of these tables in a production environment?
We therefore plan to use data source 0FI_GL_4 which contains all line items to the financial documents posted. Does this approach make sense or will it fail because of performance issues?
Any help is appreciated!
Kind regards,
Dierk

Hi Dierk,
Do you have a need for the level of detail provided by the 0FI_GL_4 extractor? Normally I would recommend going for the basic 0FI_GL_6 extractor, which provides a much more manageable data volume since it only gives the periodic activity and balances as well as a much smaller selection of characteristics. Link: [http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
Despite this initial recommendation, every client I've had has eventually had a need for the level of detail provided by the 0FI_GL_4 extractor (or the New G/L equivalent - 0FI_GL_14). Most BW systems can handle the output of the line-item extractors without much issue, but you should test using production data and make sure your system sizing takes into account the load.
The major problem you can run into with the line-item extractors is that if your delta somehow gets compromised it can take a very long time (days, sometimes weeks) to reinitialize and this can cause a large load in your ECC and BW system. Also, for the first transport to production, it is important to plan time to initialize the delta.
Ethan

Organization structure in CRM 7.0 from ECC and HR

Hi,
We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
From HR
The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
Observations:
The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
The remaining Org units are found in 'non-related objects' selection.
All the Idocs in failure are in error "Error in subroutine read_namtb for structure of infotype ". When I go to the long text
Message no. 5-109
Diagnosis
An error has occurred in subroutine read_namtb for structure of infotype .
Procedure
Check the entry for infotype in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
I am not sure which infotype needs to be checked in T777D.
From ECC
The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
Observations:
All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
I will appreciate any assistance I get here.
<< Moderator message - Everyone's problem is important >>
Regards,
DT
Edited by: Rob Burbank on Oct 20, 2010 4:25 PM

Hello DT,
Could you please let me know the process how the problem is solved..
even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
Could you please share you knowledge, so that it will help me in figuring out the issue.
Thanks in Advance DT. Hope you reply back.
Regards,
Ven

Transfer of non-valuated materials from ECC to SRM

I kindly request your help with an issue that I am facing.
The scenario is as follows :
1. There is a non valuated material X (material type UNBW).
2. MRP run happens and generates a PR with account assignment U.
3. Transfer report BBP_EXTREQ_TRANSFER is executed in order to transfer the PR to SRM.
4. The PR reaches SRM, but the SC is not created instead in SLG1 there is an error thrown, "No account assignment exist. Enter an account assignment".
5. In the backend now If I try to change the PR i get the error " 6Q204 (Procurement profile 36 cannot be changed).
Is this scenario supported ?? i,e, transfer of non-valuated materials from ECC to SRM.
Kindly let me know if you have any idea on this.

Hi,
As per your query you have not determind accounts assignment. Please do these activity.
Please see the below link.
http://help.sap.com/saphelp_srm30/helpdata/en/a9/cde93a2876a81ae10000000a11402f/content.htm
Regards,
Anil

Messages are reaching PI wthout any configuration in PI from ECC

Hi,
I am using PI 7.11. Its a fresh system so as of now there is no interfaces. Just a two days back only we have established the RFC connections ECC to PI and PI to ECC. After these configuration we have transported one interface File to Proxy scenario. Strangly some of the messages are comming from ECC to PI and its failed because of no receiver found. Other than File to Proxy we dont have any scenario in PI. Please find the below message details.
Service : BS_SAP_XXX_200
Interface Namespace : http://sap.com/xi/APPL">QueryCodeList<>
Payload :
<?xml version="1.0" encoding="utf-8" ?>
- <n0:QueryCodeListRequest xmlns:n0="http://sap.com/xi/BASIS" xmlns:prx="urn:sap.com:proxy:ECC:/1SAI/TASC66A5D70F4DF6172EFE5:701:2009/02/10">
- <CodeDataType>
<Name>BusinessTransactionDocumentTypeCode</Name>
<NamespaceURI>http://sap.com/xi/SRM/SE/Global</NamespaceURI>
</CodeDataType>
<LanguageCode>en</LanguageCode>
</n0:QueryCodeListRequest
This is a syschronous scenario that to this interface is running at specified at on everyday.
Can you pls let me know what might be the problem?
Thanks & Regards,
Puru

Hi,
I assume this scenario is not the one you transported for File to proxy.
This is Generic Value help Service which is triggered because of some event configuration on ECC or some report calling outbound proxy with default runtime (PI runtime is default). Of course this will fail in PI because you haven't configured it in PI.
Check following: SWF_BAM for events on ECC.
Check if any report is creating SalesOrder, PurchaseOrder etc at that particular time.
Issue is on ECC side not on PI side.
Regards,
Gourav

Running Sproxy from ECC 6.0/ SAP NW 7.0 - BI service pack 16

Similar Messages

Maybe you are looking for