Running the agent on port:161

Greet the sun all,
Is there any restriction on which port the WLS SNMP Agent runs on? Can
you run it on a port > 1024? I would like to avoid the root access
problem if possible.
Perry Hoekstra
E-Commerce Architect
Talent Software Services
[email protected]

Perry Hoekstra <[email protected]> wrote in message
news:[email protected]..
Greet the sun all,
Is there any restriction on which port the WLS SNMP Agent runs on?No, you can run it on any port. However, 161 is the standard port. If you
use anything else - you will have to configure your SNMP Manager (if you are
using one) so it knows to go to a non-standard port for that machine.
Can
you run it on a port > 1024? I would like to avoid the root access
problem if possible.
Perry Hoekstra
E-Commerce Architect
Talent Software Services
[email protected]

Similar Messages

Writing agents o/p to external file and if i run the agent again it should

Hi All,
i want to run a agent and that result should be displayed in external file system.and i achieved this by using writing VB script and in agents i used actions in that we have invoke server script.And i got the perfect output but what 's my scenario is when i run the agnent again it should create another file with below requirements.
The file name must contain a suffix containing the date in yyyymmdd format. In cases where the file stored more than once per day, a sequence number must also be provided within the filename.
(i.e. v1_yyyymmdd, v2_yyyymmdd, v3_yyyymmdd, v4_yyyymmdd, v5_yyyymmdd…)
And my VB script is like below
'#####=========================================================================
'## Title: Export Report
'## Rev: 1.0
'## Author: Paul McGarrick
'## Company: Total Business Intelligence / http://total-bi.com
'## Purpose:
'## 1. This script takes a file from OBIEE and saves to the file system
'## 2. Creates a reporting subdirectory if not already present
'## 3. Creates a further subdirectory with name based on current date
'## Inputs (specified in Actions tab of OBIEE Delivers Agent):
'## 1. Parameter(0) - This actual file to be exported
'## 2. Parameter(1) - The filename specified within OBIEE
'## 3. Parameter(2) - Report sub directory name specified within OBIEE
'#####=========================================================================
Dim sBasePath
sBasePath = "E:\reports\reports"
Dim sMasterPath
sMasterPath = sBasePath & "\" & Parameter(2)
Dim objFSO
Set objFSO = CreateObject("Scripting.FileSystemObject")
'check whether master directory exists, if not create
Dim objMasterDir
If Not objFSO.FolderExists(sMasterPath) Then
Set objMasterDir = objFSO.CreateFolder(sMasterPath)
End If
Set objMasterDir = Nothing
'build string to get date in yyyy-mm-dd format
Dim sDate, sDateFull
sDate = Now
sDateFull = DatePart("yyyy", sDate) & "-"
If Len(DatePart("m", sDate))=1 Then sDateFull = sDateFull & "0" End If
sDateFull = sDateFull & DatePart("m", sDate) & "-"
If Len(DatePart("d", sDate))=1 Then sDateFull = sDateFull & "0" End If
sDateFull = sDateFull & DatePart("d", sDate)
Dim sDir
sDir = sMasterPath & "\" & sDateFull
Dim objDir
If Not objFSO.FolderExists(sDir) Then
Set objDir = objFSO.CreateFolder(sDir)
End If
Set objDir = Nothing
Dim sFileName
sFileName = sDir & "\" & Parameter(1)
Dim objFile
objFSO.CopyFile Parameter(0), sFileName, True
Set objFile = Nothing
Set objFSO = Nothing
could you please any body help me out from this....

I assume you are using Windows. Try to write a batch file so that that would look for the ibot name when ever its finds rename the file name as required.
This would be easiest way..
http://lmgtfy.com/?q=rename+a+file+to+current+date+using+batch+file
Edited by: Srini VEERAVALLI on Apr 8, 2013 7:23 AM
Can you updates all your posts?
Edited by: Srini VEERAVALLI on May 13, 2013 6:44 AM

Bi content is not showing statistics data while running the report in porta

hi friends,
I installed the BI Admin Cockpit to collect the statistical information.
I can see the statistics informatio in portal only when i run the query in bex. if i run the report in portal it's not showing any statistics.
could you guide me the exact reason and pls guide me to rectify this problem
thanks in advance,
sruthi.

Any help on this....

Warning while trying to run an agent obiee 11g

Hello all,
I have an analysis and i have applied an agent on that analysis so that i receive an email with the report attached.
I have configured the mail settings in the em tool and i have run it successfully in the past with other agents/analyses.
Currently when i'm running the agent, the operation ends with the following message:
"The Agent, agent-test MP, has completed with warnings."
I'm trying to see through the logs in "C:\oracle\middleware\instances\instance1\diagnostics\logs\OracleBISchedulerComponent\coreapplication_obisch1\nqscheduler.log"
what went wrong but i see nothing helpful there.
Note that the obiee version is 11.1.1.6
Does anybody have an idea how i can look further into this problem? Maybe there are logs available in another folder etc.
Thanks in advance,
Konstantina

Hello Konstantina,
Login to BIP
Open---Report Jobs History ----Status
Double Click Status you can get the error/warning message .
Paste the warning message here.
Thanks,
Sasi Nagireddy..

Getting error while running the Interface using AGENT

Hi All,
i am not able to run the interface using Agent service which running in the another machine, while running i am getting error message like
java.lang.Exception: Error during Session launching
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
i ran the Agent services in Comment prompt, there i am getting the error like follows
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
here i have mentioned the steps which i followed for creating agent service.
i have two machine namely A and B both having the ODI
i am going to use the B machine as a centralized server. so i edited the odiparams.bat file in B machine in ODI locaiton and filled the repository information
from A machine i opened the Topology and created the Agent service there i mentioned the HOST name as "B" and port number 20300. and i configure the logical agent aswell
from B machine i started the Agent service like agentscheduler "-port=20300".
Agent service launched seccessfully.
From A machine i tested the Agent. that also shown the successful window message.
then i started running the interface using the agent i am getting the error which i have mention in the beginging.
Interface which i ran will do the text file to table loading, so i kept that file in particular location in B machine( i have configure this location when i created the file data store in topology in A machine).
Please help me to solve the problem...
thanks
nidhi
Edited by: knidhi on Nov 26, 2009 6:54 PM

Thanks For your Reply,
I ran the agent as you said. here is my observation
from the Machine B where agent is actually running, i could able to run the interface using agent service.
but from the machine A while running the interface i am getting the following error message
java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
i have created both physical and logical agent with the same name "DEMO_AGENT", and i ran the agent in the Machine B like
agentscheduler "-port=20301" "-name=DEMO_AGENT"
Please help me to solvethe issue...
Thanks
Nidhi
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:05 AM

Running multiple agents on the same server

Has anyone run multiple instances of essbase on the same server, using the agentport command? If so, how well did it work and what do you think about running it in a production environment?Thanks alot!

I have tested it, but the documentation does not recommend using this feature in production. You can achieve the same thing with creating test applications/databases.Also, when you run 2 instances of the agent on one box, you must modify the essbase.cfg of the client machine to indicate which instance (port) that client will connect to.Regards,Jade------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

How to start SNMP on LDAP Dir. server ? Is that runs on port 161 ?

When I click 'SNMP' tab on configuration it says "The snmp service has been started" But when I try to stop or restart it says, "Error occured while stop/restating subagent. Check the configuration data you entered"
Where do I check the config. data ?
Do I need to enable somewhere snmp ???
I want to browse the SNMP mib from our App.
For that I'm trying to run the snmp agent on dir. server.
any help ?
Thanx,
Ramesh//

The SNMP services can be stoped from the configuration tab but that does not stop the SNMP subagent it has to be explicitly stoped if Ur running from windows machine go to the control panel and stop the services.
If U'r running the Directory server from unix host the hostname where the master agent resides and the port no is must for the subagent to contact.
Regarding the port no SNMP is running if Ur using unix host check the /etc/services file for the port no for SNMP services.

Invalid rowid error while running the snapshot agent in transactional replication

Hi All,
I am getting an Invalid rowid error while replicating an large tables i.e around 30 millions rows from oracle(publisher) to sql server(Subscriber) while running the snapshot agent in transactional replication.
Its taking around 18 hours and its then its throwing this error.
Is there any faster way that i can replicate the initial snapshot this large table as 18 hours is very high on time.
Kindly suggest.i am always got quick and accurate response always..hope the same in this case also.
Thanks,

Hi,
Could you please create a replication with some small tables for a test?
You can disable the firewall on both sides and rerun snapshot. Enable verbose logging to level 4 for snapshot agent and check the results if it fails.
http://support.microsoft.com/kb/312292
Here is a document says for the error: ORA-10632: Invalid rowid Cause: Segment Highwatermark was overwritten due to shrink and space reused Action: Reissue this command.
I also suggest you contact the Oracle support team for further help.
Thanks.
Tracy Cai
TechNet Community Support

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Not able to run the SSIS package in SQL Server Agent Job in SQL 2012

Hi,
I scheduled a job (SQL SERVER AGENT) which will call my SSIS package. This package will execute 5 packages in loop.
When I execute this job I am getting error as below
============================================================
Started  : 12:30:19 PM
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220EC
Source  : Execute Package Task
Description : Error 0x80070005. Failed to create an instance of empty child package.
    The Distributed Component Object Model (DCOM) configuration or the installation of SQL Server Integration Services,
    may be corrupted on your machine. End Error
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220DE
Source  : Execute Package Task
Description : Error 0x80070005 while loading package file "D:\SSIS\RetailMobileApp\Staging_Pkg\stg_Category_Master.dtsx". Access is denied.End Error
DTExec  : The package execution returned DTSER_FAILURE (1).
Started  : 12:30:19 PM
Finished : 12:30:20 PM
Elapsed  : 1.123 seconds.
The package execution failed.
The step failed.
============================================================
In the STEPS I have selected as follows:
Type : SQL Server Integration Services Package
Run as: SQL Server Agent Service Account
Package Source: File System
What config I need to check here ? This job is not able to access the package stored in the folder.
Sridhar

Thanks for your reply. I had created credentials and used this while creating the Proxy account. With the Proxy account I am able to execute the Job Successfully. Concern here is I used my NT account to create this Proxy. Suppose If I left from the
current project if some one is coming to this project later they need to change the credential with their NT account and run the JOB? Is this right way or we an create any other account in common? If so how?
Sridhar

I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

The 2009's didn't support sound on HDMI. That came in 2010. Are you sure it ever worked?

Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
·              We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
·              And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
     Thanks,
         D.N. Rana

Hi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000                   (26 Minutes)
"ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
"ServerInfoTimeout"=dword:00180000                  (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana

Dropped/recreated SQL jobs and now SQL Agent can't run b/c old job_id is still being referenced by the Agent.

I've seen a common issue in several of our production environments where after we upgrade our software the SQL Agent can't run some jobs that were recreated as part of the process because they're referencing the old job_id (in msdb.dbo.sysjobs) that no longer
exists. I can fix it easily enough by restarting the agent as this will flush whatever cache is being used by the Agent but I'd like a less invasive way to do this, if possible.
Is there any way to flush the cache used by the SQL Agent to store job_ids without having to restart it? Thanks.

You may try this , and this solves this issue.. I hope if you do this then you no need to restart the agent...
DECLARE @jobId binary(16)
SELECT @jobId = job_id FROM msdb.dbo.sysjobs WHERE (name = N'Name of Your Job')
IF (@jobId IS NOT NULL)
BEGIN
EXEC msdb.dbo.sp_delete_job @jobId
END
DECLARE @ReturnCode int
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'Name of Your Job'
Raju Rasagounder Sr MSSQL DBA

Port conflict error when trying ot run the page.

Hi ,
Below is the error message whern I try to run the page.How to resolve it.
I tried checking tools->preferences->embedded oc4j->Host name to default local ip address and local host name
Another trial was : open Task Manage ->Process tab..if there will be two process jdevw and javaw. Terminated those process and then start JDeveloper and run the page,it should work , but i could find only java.exe running.
Appreciate your help.Thanks.
**** JMS port conflict detected. The JMS port will be reassigned to port 9236.
[Starting OC4J using the following ports: HTTP=8995, RMI=23892, JMS=9236.]
D:\MC\oajdev\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath D:\MC\oajdev\jdevbin\j2ee\home\oc4j.jar;D:\MC\oajdev\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:D:\MC\oajdev\jdevbin\jdev\appslibrt\ojdbc14.jar;D:\MC\oajdev\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config
D:\MC\oajdev\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Fatal Error: Unable to write to the transaction log (/D:/MC/oajdev/jdevhome/jdev/system9.0.3.5.1312/oc4j-config/log/transaction.state), possible reasons for this are that Orion lacks permission to write to the file, or that another instance of the server is already running with this configuration (most common): Unable to alter transaction log
Process exited with exit code 1.

You have other JDev session running.
Probably your first JDev session was not terminated gracefully.
Close ALL JDev sessions. Go to Task Manager and kill any process related to JDev.
Then open JDev again. You should not get this error message again.
PS. Despite of this message, you will be able to continue with your work.

Running the agent on port:161

Similar Messages

Maybe you are looking for