Running with maps

Are there any running apps that lets me use the watch GPS and offline maps? I don't want to carry my phone while running...
Solved!
Go to Solution.

I'll try it out too
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Error ORA-01460 warning ORA-01461 during running a mapping with parameters

Oracle 10g release2(10.2.0.1.0), OWB 10.2.0.1.31, Workflow server 2.6.4
I have a simple process flow ( start -> mapping -> end).
The mapping consists of 4 input groups(3 ordinary tables<INGRP1, INGRP2, INGRP3> and 1 mapping input parameter operator <INGRP4>), a joiner, a filter, an expression operator and 1 output group.
I want to use two variables in join condition, so I bound two mapping input parameters(<INGRP4.SRC_SYS_CDE> and <INGRP4.ADMIN_ORG_NUM>) with two parameters of the process flow's start activity.
Those two mapping input parameters are of type char, one is 4-char long and the other is 2-char long. So I set both of the two parameters of the start activity as String, one as 08, another as 7504.
My join condition is:
INGRP1.ORGIDT = INGRP2.SOURCEORGANIZATIONNO AND
INGRP2.SOURCESYSTEMCODE = INGRP4.SRC_SYS_CDE AND
INGRP2.ADMINORGANIZATIONNO = INGRP4.ADMIN_ORG_NUM AND
INGRP1.CURCDE = INGRP3.NUM(+)
There are no errors and warnings in validation, generation and deployment process, but when I run the process flow, it always finishes blankly(zero insert) with no error and warning messages. It should insert more than 20,000 rows.
When I run the mapping and set the parameters 08 and 7504 at the parameter prompt, then start, the following error and warning occurs.
Error ORA-01460: unimplemented or unreasonable conversion requested
Warning ORA-01461: can bind a LONG value only for insert into a LONG column
So what's the problem? How can I fix it?

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

I need to run a map against a particular dataset - how can i do it in OWB

Hello again :)
I need to run a map against table on a particular dataset (WHERE clause) - how can i do it in OWB?
The map is loading data from table A into table B (doing all sorts of wierd and wonderful things in between). Now table A had more (a lot more) data added which i have to load into table B.
How can i modify my map so that it only runs agains this newly added data (normally i would do a where clause).
i cannot find how to do it in OWB :(
The map i am runnig is fairy complex so i didn't really want have to create another table/view of the data i need then remap in all etc.
Any ideas would be greatly appreciated.
thank you very much
Kind Regards
Vix

Hello AP
Well that is the thing - records are constantly added to table A all the time and then undergo tramsformations and loaded into table B. What i want to do is somehow indicate in the the map to only run agains records that have beed added (colmn2 = 'value').
At the moment i created a view for the desired dataset (colm2 = 'value') and remapped everything. But it is a bit of a pain:
1) there are a lot of functions and each takes a number of columns (i have some functions taking up to 6 diff columns)
2) i have data loaded to table A all the time and i need to then transform and load it to table B. so i try to aviod doing the whole re-mapping thing all the time.
In TOAD it would be a simple statment 'where colm2 = 'value' and all my functions will be run agains those records that satisfy the condition. How can i do it in OWB?
If i use filter - i would have to use 'mid' table where filtered records will be loaded and from that use 'mid' table as table A in the map. does this make sense?
the main disadvantage is the performance - moving data from one table to 'mid' table etc.
I tried using conditional load filter and it still doesn't do what i want.
After trying diff options i decided to ask people here about it. The only thing i have left to try is to ask Oracle support. I am sure it would be a 'user knowledge' as i am sure this functionality exist i just can't find any references to it.
Thank you very much for all your help. In fact this forum helped me a lot with a number of other issues :)
i just feel like a lemon coz it is very simple thing and i can't find how to do it...
Kind Regards

Login scripts not running with AnyConnect NAM and ISE 1.2

I am using AnyConnect 3.1 NAM as my 802.1x supplicant for ISE 1.2. When users log in with EAP Chaining (User and Machine Auth), the login script seems hit or miss on if it runs to map their drives. If I uninstall the NAM client, they map drives every time. I would think that running a login script to map drives is a common scenario and I was wondering if anyone else using AnyConnect NAM was having similar issues or how they were dealing with it.

I have the same issue and I solve the issue with change these parameters.
1.- You must change on configuration profile "before user logon". I have 5 seconds
2.- You must change on configuration profile "port authentication Exception policy" and you must enable checkbox "enable port exceptions" and select "allow data traffic before authentication"
3.- You must enable in the option of interface Ethernet Intel on PC "Wait for link" this option It's in "configured advanced of Intel. You must select "on" in this option.
4.- (this recommendation it was by Cisco)
Active Direct GPO has a setting "Computer Configuration\Administrative
Templates\System\Logon\ Always wait for the network at computer startup and logon" that
can be enabled to make the logon scripts wait till 802.1x authentication is completed.
With those changes the logon script run fine.
Regards
David.

Run with User's rights not working as expected

I have a VBscript that runs the Quest Client Profile Updating Utility for migrating Outlook e-mail profiles to a new Exchange Server. For this tool to work it must be run using the User's security context when the user is logged onto the computer.
What I have found is that the script fails to run because SCCM is running the script with elevated privileges. The program is set with 'Only when a user is logged on' and a run mode of 'Run with user's rights'. The advertisement is set to run from
a distribution point and has two mandatory re-occuring schedules (Logon, and at 6:00 a.m. every day).
To test what is happening I created a separate Program that has the same program settings but only runs 'Cmd.exe /k echo' for the command line. If I run this SCCM program as a user who is not a member of the local administrators group
I can execute privileged programs like regedit.exe. If I run the Command Prompt from the Start\Accessories folder and try to run Regedit I receive an 'Access denied' message. It appears SCCM is running with elevated privileges.
Does SCCM run a program with elevated privileges? How can I make a program run without elevated privileges.
thank you for your help.

Actually I ran into a similar issue today trying to gather info about mapped network drives and found this thread when trying to troubleshoot it. Here's a summary of what I've done:
I have an SCCM package set up to run a script to dump the users' mapped drives to a text file. The program is set to run only if a user is logged on and to run in the logged on user's context. UAC is enabled. For users who are members of
the local Administrators group, the resulting text file was empty, as if no drives were mapped. Running the script manually (not via SCCM, just double-clicking the script) populated the text file with the expected results. So the script works correctly.
I suspected SCCM was running the package elevated, since drives mapped in the non-elevated context aren't visible to the elevated context.
To test, I created another package & program that runs a command I know requires elevation (ipconfig /registerdns) and pipes the output to a text file. I configured it in the same way, and for users who are in the local admin group, the text file results
indicate that the command ran successfully (which means it ran elevated). If I take the user out of the local admin group, making no changes to the package, then run the package again, the text file results say "This command requires elevation."
So, it appears SCCM is running with the highest elevation level for which the user has rights. I guess this makes sense, and it's not doing anything the user wouldn't normally have rights to do, but it does cause a problem when a program needs to run
under the user's non-elevated token. Any suggestions?
Thanks,
Matt

Run-time mapping exception in JDBC Scenario

Hello There,
            We are working on a "Communication between IDOC and JDBC" Scenario where in the IDOC is successfully getting called in SAP XI from an SAP R/3 system. But!, when we try to map the IDOC structure with a JDBC Database structure through a manually created XSD, it gives the following run-time mapping exception :
"During the application mapping com/sap/xi/tf/_RequestMapping_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
The following is the XSD that we have created manually for the Target JDBC database table structure which shows the parent-child relationship of the database and is causing the above stated exception :
<?xml version="1.0" encoding="UTF-8"?>

<!W3C Schema generated by XMLSPY v2004 rel. 4 U (http://www.xmlspy.com)>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:element name="ACCOUNT_GROUP" type="xs:byte"/>
     <xs:element name="AUTHORIZATION_GROUP" type="xs:byte"/>
     <xs:element name="CITY" type="xs:string"/>
     <xs:element name="CITY_CODE" type="xs:short"/>
     <xs:element name="COMPANY_CODE" type="xs:short"/>
     <xs:element name="COUNTRY_CODE" type="xs:byte"/>
     <xs:element name="COUNTRY_KEY" type="xs:byte"/>
     <xs:element name="CREATED_DATE" type="xs:short"/>
     <xs:element name="CUSTOMER_CLASSIFICATION" type="xs:boolean"/>
     <xs:element name="CUSTOMER_NUMBER" type="xs:short"/>
     <xs:element name="DISTRICT" type="xs:string"/>
     <xs:element name="FAX_NUMBER" type="xs:int"/>
     <xs:element name="FIRST_NAME" type="xs:string"/>
     <xs:element name="GROUP_KEY" type="xs:byte"/>
     <xs:element name="HOUSE_NUMBER" type="xs:date"/>
     <xs:element name="INDUSTRY_KEY" type="xs:byte"/>
     <xs:element name="INTIAL_CONTACT" type="xs:byte"/>
     <xs:element name="LAST_NAME" type="xs:string"/>
     <xs:element name="LOCATION_NUMBER" type="xs:string"/>
     <xs:element name="NAME_PERSON" type="xs:string"/>
     <xs:element name="POSTAL_CODE" type="xs:int"/>
     <xs:element name="REGION" type="xs:string"/>
     <xs:element name="REGIONAL_MARKET" type="xs:byte"/>
     <xs:element name="TELEPHONE_NUMBER" type="xs:long"/>
     <xs:element name="VENDOR_ACCOUNT" type="xs:byte"/>
     <xs:element name="resultset">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="row"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="row">
          <xs:complexType>
               <xs:choice maxOccurs="unbounded">
                    <xs:element ref="CUSTOMER_NUMBER"/>
                    <xs:element ref="COUNTRY_KEY"/>
                    <xs:element ref="FIRST_NAME"/>
                    <xs:element ref="LAST_NAME"/>
                    <xs:element ref="LOCATION_NUMBER"/>
                    <xs:element ref="AUTHORIZATION_GROUP"/>
                    <xs:element ref="INDUSTRY_KEY"/>
                    <xs:element ref="GROUP_KEY"/>
                    <xs:element ref="ACCOUNT_GROUP"/>
                    <xs:element ref="CUSTOMER_CLASSIFICATION"/>
                    <xs:element ref="VENDOR_ACCOUNT"/>
                    <xs:element ref="REGIONAL_MARKET"/>
                    <xs:element ref="INTIAL_CONTACT"/>
                    <xs:element ref="COMPANY_CODE"/>
                    <xs:element ref="CREATED_DATE"/>
                    <xs:element ref="NAME_PERSON"/>
                    <xs:element ref="CITY"/>
                    <xs:element ref="CITY_CODE"/>
                    <xs:element ref="COUNTRY_CODE"/>
                    <xs:element ref="DISTRICT"/>
                    <xs:element ref="FAX_NUMBER"/>
                    <xs:element ref="HOUSE_NUMBER"/>
                    <xs:element ref="POSTAL_CODE"/>
                    <xs:element ref="REGION"/>
                    <xs:element ref="TELEPHONE_NUMBER"/>
               </xs:choice>
          </xs:complexType>
     </xs:element>
</xs:schema>
IS THERE ANY OTHER WAY OF ACHIEVING THE ABOVE TASK OF AUTOMATICALLY GENERATING THE REQUIRED DESTINATION STRUCTURE ON THE JDBC TARGET SYSTEM SIDE ?. PLEASE ADVICE ASAP.
REGARDS ......
K. Venkat!.

Try setting the classpath properly. It seems the runtime evironment is unable to find the compiled class files. Nothing else is wrong.
--Anil

To run a mapping using owb 10g expert

Hi All,
My requirement is to run the mapping in OWB using an expert.I created an expert using OWB and associated the mapping with the expert using Add/Remove expert option.I validated and generated the expert.But when i run the expert through start option in design center then my target table in the mapping does not get loaded.This shows that i am unable to associate my expert with mapping.
In expert editor, i linked start_task with custom_dialog_task which is again linked with the end_task.It seems i am missing some steps.Please let me know what all steps need to be followed in expert editor interface to run the mapping.Response is awaited.
Thanks

You're better off asking that question in the [OWB forum|http://forums.oracle.com/forums/forum.jspa?forumID=57].

Problem with mapping the Entity beans onto database tables

Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!

You need to add the pbclient.jar or some similar name like that, in the CalssPath.

Firefox can't run the map from Traffic England.

Firefox will load Traffic England home page but wont run the map. It starts to load and then stalls with just the Java logo on a black background. Map works fine with Explorer and used to work fine with earlier versions of Frefox.

If the Maps App is not functioning try this.
Double tap the home button to bring up the recent apps at the bottom. Find the Map app and hold down on the icon until it begins to wiggle. Tap the minus sign in the upper left corner of the icon to quit the app. Tap the home button and the icons will stop wiggling. Then tap the screen to return to the home screen.
Now restart by holding down on the sleep button until the red slider appears then slide to shut down. Hold down on the sleep button until the Apple logo appears and let go of the button. When the iPad has started up, try the Map app again.
It is impossible to delete or re-download the pre installed iPad apps. Safari, iTunes, Maps and so on.

Differentiating Between Windows XP and Windows XP Embedded with MAP Tool

Hi All,
I have a customer who has multiple Windows XP Embedded Thinclients. When he runs the MAP tool they show up as Windows XP devices. I have personally not seen this yet since he hasn't shared the MAP data yet but does anyone know if the MPA tool
can differentiate between Windows XP desktops and Windows XP embedded Thinclients or are they all lumped together? Does the MAP tool show for example versioning that might help differentiate? Any help would be greatly appreciated.

When queried by MAP, the WMI service in the Windows XPe machines are reporting back as “Microsoft Windows XP Professional” and since MAP can only report what WMI tells it, that is what shows up in the reports. This is an artifact of Windows XPe because it
starts out as a full version of XP Pro and then each OEM can choose what parts they want to remove, if any. If the OEMs don’t modify the WMI class to show the product as XP Embedded, it will continue to show up with its original description of Windows XP Professional.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

K8n neo2 running with 260 FSB ?

Hi !
Well, I have one question about the FSB and Multi settings.
first, my sys:
-K8N Neo2 Platinum
-AMD64 3500+ winchester
-OCZ 2x512 DDR (PC 3500 - 433Mhz) Ram
-2x S-ATA HDD Hitachi 160GB @ Sata 3&4
-550W PS
So, with some tests, I can found the fastest CPU-freq @ 2600Mhz with 1,58V VCore - testing with Prime95.
But I want the fastest clock for the rams, too. The Ram works with FSB 217, DDR200-setting in BIOS. Multi 11x. very well at 217Mhz...
first settings:
FSB @ 237 / Multi @ 11x / HT @ 4x / Ram set to DDR166.
So the effective CPU-clock is 2604Mhz, the ram is at 186 Mhz.
The setting works fine... but with very poor ram-clock...
(I had to set the ram to DDR166, because with DDR200-Setting the clock will be 237 which is too high and I can´t boot. )
2nd setting:
FSB @ 248 / Multi @10.5 / HT @4x / Ram set to DDR166.
The setting works fine... The Mobo shows a ram-clock of 208Mhz. The Tool "Clock-Gen" shows a ram-clock of 200Mhz...(I dont´know which is right...?) But: The Ram-Clock can ba 217Mhz, I guess..?
3rd setting:
FSB @ 260 / Multi @10 / HT @3x / Ram set to DDR166.
This setting crashes up while booting.... normally, I think, the CPU-clock will be 2600 (which will work), the RAM will divided down to 217 Mhz.
Now my prob: the CPU runs with 2604 Mhz, the RAM runs with 217Mhz - but why can´t I set the FSB to 260 and Multi 10x ?? PS: the system ist still crashing, when I set the Multi to 10x and try FSB to 250Mhz... ?
Does anyone know ??
Many thanks !
A.

Just so you know, when you use dividers, your memory performance is only as good as the lowest setting. For example, I you have a system with ddr333 memory and a CPU with a 333mhz FSB your memory performance is as follows:
Memory Peformance:
133CPU x 133mem = 166CPU x 133mem
CPU performance:
133CPU x 133mem
As opposed to:
Memory Peformance:
133CPU x 166mem CPU performance:
133CPU x 166mem
The Kicker:
Memory Performance (first versus second):
133CPU x 133mem 166CPU x 133mem CPU Performance (first versus second):
133CPU x 133mem 166CPU x 133mem
I neglected to try overall combined performance like 3dmark01/03/05 but I was on a time budget at the time and only concerned with running a 4:5 divider as opposed to a 4:4 divider which my results gave me no increase (but no decrease either).
Therefore, you get no increase in memory performance when using dividers. I used sandra to verify this. I simply used my CPU and RAM in every different configuration I could think of and then ran it and recorded the results. Hopefully I remembered my results correctly.
Yes, you will see a CPU increase with dividers but you will not see a memory increase.
The Kicker Reiterated:
CPU Performance:
(133 CPU x 133 mem
Personally I think you should be happy with an FSB of 248 because that means your memory frequency is 198.4mhz which means you nearly have ddr400. How much of an increase do you think you'll see with 260FSB (208mhz memory frequency (increase of 9.6 mhz))? Personally I think you should be happy with 248 with a 5:4 divider.
ORRRRRRRR:
try benchmarking with a 216FSB x 11mult x 4htt with DDR200 versus 248 x 10mult x 4 htt with DDR166 and see which is faster. You'll do better on the first with memory and better on CPU with the second but the inverse will be the inverse. Then I would do an overall benchmark like 3dmark03/05 and see which had the best overall effect (I'm guessing it will be a somewhat close call but I never tried that... hmmm... something to try now).

How to keep an application level object running with SunIDM?

We are working on intergrate a gmail project with SunIDM. We need an application level object running with SunIDM so it will maintain a token generated from Gmail side. In anther servlet project, I had this object saved in the attribute of the ServletContext, then other session level servlet could share this attribute anytime. Is there a way to store attribute in Servlet Context and have it shared by different user session in SunIDM? I have been reading documents and searched this forum, haven't find any topics related how to maintain an application level object live. Hopefully that I can get some hint here.
Thank you so much.

Paul, Thank you so much for the further explaination. I don't think it will work since the token generated from gmail will expire every 24 hours.
We are using the gdata library published from by gmail people, and I create a new UserService object and have it run in the application level. The UserService object will generate a token and renew it every 24 hours behind the scene. Here is how I implement it in my Servlet project:
//to have a UserService object running at the application level:
public class GmailUserService extends HttpServlet {
public void init(ServletConfig config) throws ServletException{
super.init();
userService = new UserService(myApplication);
config.getServletContext().setAttribute("gmailUserService", userService);
//to access this UserService object from other servlet in each user session:
UserService userService = (UserService)servletContext.getAttribute("gmailUserService");
Gmail will trigger an error if we create a new UserService object for each user. They recommend to have all the user to share one UserService object. I am looking for similar approach in SunIDM.
Thank you again, Paul, for trying to help.

Running with maps

Similar Messages

Maybe you are looking for