Runtime analysis for background job

Hi,
Can we run SE30 for any background job...
Thanks & Regards.
Srini.

Hi Srinivas,
Refer to this
Run time analysis SE30 in background?
hope it helps you.
Thanks!

Similar Messages

Regarding Variants for Background jobs

Hi Folks
Can you please let me know the procedure how we can create the variants for Background jobs.
Points are assured for correct answers.
Regards,
kumar

Hi Sree Ram,
Check this info.
If you have any selection screen parameters for your program you need to enter the values for those fields in runtime. So, if you schedule your program in background to execute then there is no one to do this job. Here comes the concept of Variant.
With variant you define what are the selection field values in the runtime. During runtime the program picks this values and runs the program.
When you execute your program which has selection fields, you enter the values and then you click on 'GO TO ' tab and 'SAVE AS VARIANT'.
When you schedule your program in background, give this variant also. Then it will run automatically.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Job failure ( report RFFDKU00 scheduled for background job)

Hi Experts,
    When iam scheduling the report RFFDKU00 for background job. Job is getting cancelled with status "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" . when iam obesrving this job it is going to dump at this select query
"     select ausbk belnr gjahr bzkey buzei
033370                  from vbsegs into table t_vbsegsfields
033380            where bukrs in r_bukrs
033390            and not ( fdlev = space
033400                  and fdgrp = space
033410                  and fdtag = init_date
033420                  and fdwbt = 0 )
033430            and not saknr in r_cm_sk   "
Can anyone helpme to deal with this issues ,
thanks in advance,
Kranthi

note 167301 might help.

Function module for background jobs email

hi abaper's
i hace to create a function module for background jobs this function module have to send an email automatically when a background job is assigned or processed in background.
thnks n regards
pardeep kumar

hi dear
open this site
https://weblogs.sdn.sap.com/pub/wlg/781. [original link is broken] [original link is broken] [original link is broken]
<removed by moderator>
Edited by: Mike Pokraka on Aug 8, 2008 12:48 PM

SQL trace for Background jobs

Hi
Can anyone suggest how to find the SQL trace for background jobs.
Thanks in advance.
Regards
D.Vadivukkarasi

Hi
Check the transaction ST05.
Plz Reward Points if helpful

Runtime analysis for a Method

Hi,
Need some help on how to find the Runtime Analysis for a method in Class, as i am getting some performance issues with the statements in the method.
Please let me know ASAP about this Runtime Analysis for a method in a class

In Runtime analysis Look for
ABAP - In your ABAP code
DATABASE - It shows the performance of your SELECT statements in your program.
Just check how much % it is showing for both.
Check for following in your code.
1) Avoid SELECT *
2) Clear internal tables values which are not required at the ending of program, as it saves memory
etc.

Date and time for background job

Hi,
I am creating a program with out selection screen . This program runs based on date and time . so I need to create a table
with date and time fileds.
Program runs based on FROM DATE FROM TIME TO DATE TO TIME....... FROM DATE and FROM TIME will get it from ztable and TO DATE & TO TIME values as SY-DATUM & SY-UZEIT. In the end I will update sy-datum and sy-uzeit values in the custom table to get the values ( Use it for from date from time ) for next run of the program.
This program is mainly used for background job so how do we get the values of from date and from time for the first run of the program ? how do we update the latest date and time details by deleting old date and time details.
Thanks ,
Vinay.
Edited by: Vinay parakala on Apr 22, 2010 9:18 AM

First of all, I'll suggest to maintain TVARVC instead of doing it in custom table unless you need a complete log.
As per my understanding, you are trying to fetch some records based on the time period(Delta loads).
So, you will do an initial run to load the complete data then you will run it for time periods. For example,
1st Load- 01/01/1991(earliest date possible) - today's date say 03/22/2010
2nd load- 03/22/2010 - today's date
so on............
You have to move the to date values to from date values and to date value needs to be updated by the latest one for each load.
Do you have any dependency on background job? Please let me know if my understanding is correct or specify your requirement in detail.

Variants for background jobs

You need to schedule and automate batch jobs in an organisation. There will be multiple variants and multiple steps within same batch jobs. The variants are date dependent and needs to change every day. You need to automatically change the variants every day and schedule the jobs. Also check for the failures in the jobs. Apart from that Once the jobs in one server example : R/3 server ends the jobs in BW servers should be triggered automatically. Explain all steps with proper T codes and also provide a dry run example. Also provide all the table used for the variants purpose.
Please help on this,thanks
Narendra

Hi Narendra,
The background jobs are scheduled depending on the requirement with specific variants which are both date specific and even specific sometimes. These variants are created for the programs or reports which are run in the background job ,These variants are stored in VARID table for client specific variants and
VARID_CI for client independent. For most of the times all these jobs are maintained in some job scheduling tools so that they automatically inform about job failures and processes can be automated.In our organisation we use UC4 for background job schedulign and it controls the process as you are looking for.
Please award points accordingly
With Regards,
Junaid
Message was edited by:
muhammed junaid

Runtime analysis for an RFC function Module

Hi,
How to get an Runtime analysis for an RFC function Module?
I have an RFC function Module I am using it for a WEB INTERFACE . For this function Module I need to get Runtime Analysis.
Please do not duplicate or cross post
Edited by: Rob Burbank on Feb 21, 2009 11:42 AM

Total Questions: 40 (39 unresolved)
Duplicate thread locked.
Rob

Userexit or BADI for program *RMMRP000* for background job

Hi,
We are scheduling background job for MRP through SM36 using program RMMRP000 or Through Transaction MDBT (MDBT is calling program RMMRP000) which creates PR (through background job).
I want to default one field in PR (PO Price field in valuation tab in PR default to gross) using any userexit or BADI.
Can any body suggest me userexit or BADI for program RMMRP000 for background job
Regards.

Hi,
1. The below are the List of Userexit for this MDBT t.CODE.
2. But i dont see any one helping to resolve your issue.
3. May be you should lookg at the Userexit for me21n or relevant Purhcase requisition creation transaction.
reg
dsk

Runtime Analysis For Classes

Hi All,
Can we do runtime analysis for Classes and Methods in the same way as program and function module?
Thanks & Regards,
Samir

You can have a look at this thread Transaction SAT - Analyze Performance of Classes in which the OP has written a blog for the question.

Runtime analysis for interface(in sproxy)

Hi,
I want to tune an interface(XI - sproxy). What tools can i use?
Specifically, can i use runtime analysis for interface defined in sproxy.
Any inputs will be appreciated. Thank you.

Hi,
When you create a interface using a proxy you are handling two different environments. Runtime analysis will not be applicable to end-to-end (XI->SAP for inbound) solution.
If on the SAP R/3 end you have FM/program which is triggered by the proxy you can execute the FM in standalone to get the runtime analysis of the code.
I hope it clarifies.
You can get back if you have any doubts.
Regards,
Sandeep

Runtime Analysis for VOFM

Hi Folks,
Can we take a runtime analysis for VOFM routines?Please explain i am new at it.
Thanks in Advance.

1) Create a user variant in SE30 and tick particular units. ( Check the link given below)
2) Set the breakpoint on your routine's first statement and on the last statement.
3) Now run VC01 transaction through SE30.Debugger will stop at the first statement. Change to classic debugger and on the command line put /RON. ( I think for new debugger, it sometimes doesn't work )
4) Press F8. Once it reaches your routines last statement. Put /ROFF in the command line.
5) Now go back and see the analysis in SE30.
Refer the following external link
http://zevolving.com/2009/12/measure-the-performance-between-break-points-using-se30/ ( External )

FM for Background Job Check

Hi,
is there a function module that will check the background job status and will wait for it to finish before returning to the calling program?
I have developed a program that triggers a background job at runtime, but i also need to make sure the job is finished, successful or not, before the output of the program. i'm currently doing a query in a job table inside a do enddo loop, but i believe this is not efficient.
Any ideas?
thanks.
tyken

I am not having the sample Code with me right now...
But i'll help you to build the logic...
after Write report.
Use the Function module I told u...
then...
write a select query on table tbtcp with job info you will get from FM.
What is your objective after getting the Background Job details..?

Program for Background Job for COGI

Does anyone know what is the Program name for creating background job to run COGI? I'm using CORUAFFW to create variants and run the program but its not working as I guess it isonly generating the report but not deleting the records if inventory is added.
Thanks
Mama
Edited by: Amit Raichura on Mar 21, 2008 1:31 AM

Amit,
Use Program "CORUAFWP" to schedule background job to post COGI error records if the error is corrected, as in your case stock is corrected.
Regards,
Prasobh

Runtime analysis for background job

Similar Messages

Maybe you are looking for