Runtime engine memory increase when .exe is not running.

Hi,
I have built a stand alone application that on launch will pop up it's front panel, and wait for the user to click the run button.
If i look in Task Manager, i see the .exe is present and has memory allocated to it.
If i do nothing (do not click the run button), and leave the application window open, the memory allocated (as seen in Task Manager) increases (about 3mb over 24 hrs). -note, the .exe is not actually 'running' my code, as the run button has not been clicked.
1, is this normal?
2, is there anything i can do to stop it?
3, is this down to my coding? (-would seem not as my part of the .exe does not run until the run button is clicked by the user?)
I do not have experience with memory & windows handling of it.
I understand the concept of a memory 'leak' -increasing memory due to continually incremented arrays etc.
Note, i am running the Execution Trace Toolkit, and it is enabled in the .exe.
LV 2011, SP1, WIn XP. (going to upgrade soon, but have held it static as a dev platform...)
Suggestions welcome...
Thanks.

BlueTwo wrote:
1, is this normal?
No it is not. An application needing to click run before it works, is not normal. Open Microsoft Word, does it run? Do you need to click a run button? Other programs do not behave like this and neither should yours.
That being said I don't think this memory increasing by not running is normal, but I have never seen it and maybe that's because my program is either running or not. It is never in limbo where it is running but not doing anything.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Similar Messages

SPUCWORKERPROCESS.EXE is not running message when debugging workflow on Sharepoint 2013

When I launch my workflow from Visual studio 2013 I get an error saying "Unable to attach. SPUCWORKERPROCESS.EXE is not running".
I verified that "Microsoft SharePoint Foundation Sandboxed Code Service " is running in Central Administration"
I pass these commands from powershell:
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount]"Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags]"ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
And I run Visual Studio 2013 as Administrator.
Effectively when I look in Task Manager there is no SPUCWORKERPROCESS.EXE but a lot of SPUCWORKERPROCESSPROXY.EXE.
My environnement developpement is a single Windows Server 2012 R2 as Domain Controler with Sharepoint 2013 SP1 and February 2015 Cumulative Updates. Visual Studio 2013 Update 4.
Any idea

Hi,
Per my understanding, there is an issue when deploying a workflow solution from Visual Studio.
I suggest you check the ULS logs to collect more information for troubleshooting this issue.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Also, you can try creating an empty SharePoint project without extra customization for a test to see if the issue persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

FAIL: process disp+work.EXE Dispatcher not running

Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
Peerasit

Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
I completed the trial questionnaire & all seemed well. Can anyone help?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to turn off alarms when iCal is not running

iCal-Version 4.0.4 (1395)
Imagine giving a lecture supported by powerpoint in front of an audience, all applications turned off except of powerpoint, and suddenly popping up the iCal alarm message "meet her (xy) in the pub". How can I turn off alarms when iCal is NOT running?
cheers
knatterton

Hey! I was DJ'ing and an iCal alarm went off even though I'd selected to have alarms not go off when iCal is not running. Now that option isn't there anymore! Can I revert to the previous version of iCal? I don;t see any other new features that are worth not having interruptions during DJ'ing and presentations! I know that if I turn off all alarms, I will forget. I'd create an alarm to remind me to turn it back on, but... This is REALLY annoying.
Rob

IBeacon : launch app when application is not running

Hello Friends,
How can i launch the app when app is not running when i found any beacon in range of device.
I am able to detect in background state for long time, but when i close the app from background i am not getting any notification.
Please help me, Thanks in advance.

Update your IOS to 7.1 and it should work.

Startup EXE is not running in cRIO-9002 controller

Hello all,
I have a compactRIO with NI 9002 controller. The controller has following software.
1. Labview real-time 2011
2. NI-RIO 4.0
I have made simple User LED blinking application under RT target using Labview 2011 and build EXE. But, EXE is not running after successful deployment. I have tried troubleshooting the cRIO controller using following NI knowledge base.
http://digital.ni.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E
Kindly help me to solve this issue.
Solved!
Go to Solution.
Attachments:
User LED Program.zip ‏14 KB

You need to disable the SSE2 optimisation option in your build properties as you are running on a cRIO 9002, which is an older model that does not support this feature:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/sse2_caution/
Thoric (CLA, CLED, CTD and LabVIEW Champion)

AdobeDownloadAssistant.exe does not run

AdobeDownloadAssistant.exe does not run on my computer? What can I do? Thanks

Hi PizarrasyPizarrones,
Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369
Regards,
Rave

Forms 6i setup.exe will not run

I am trying to uninstall Forms 6i from a PC (Windows XP) and the manual recommends doing it via the installer.
However the installer (setup.exe) will not run. No error message, control just returns after double click.
I am pretty sure this was how we originally installed Forms 6i but for some reason it does not run now.
Tried a couple of things like turning DEP off, to no effect.
Anybody has an idea where the problem is?
Or should I just uninstall the hard way by deleting the folders and cleaning up the registry manually

Hai,
In The Properties of the setup file, there is a Tab Named Compatibility. In that tick the Run this program in compatibility mode for:
and select the latest Operating system listed in the Combo box. (Eg: Windows 2000).
and Press OK.
then it will work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

PreviewProcessingService.exe does not run in the background

I just installed VS2013, and SQL2014 RTM, and after that I installed SSDT BI for VS2013 released version (http://www.microsoft.com/en-us/download/details.aspx?id=42313).
But when I created a SSRS project in VS2013, and then preview the report, there pops up a command windows "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\PrivateAssemblies\PreviewProcessingService.exe", and it runs in the foreground,
not like in VS2012 or VS2010, that command does not appear, and it runs as a background process. Besides that, if I close that windows, and preview the report again, it shows the error, "There was no endpoint listening at net.pipe://localhost/PreviewProcessingService5692/ReportProcessing
that could accept the message. ".
Anyone has the same issue? how to work it around?
Hunter

Hi Katherine,
Thank you for the suggestions. I tried both of them, for option 1, I can't find any the service named "Net.Pipe Listener Adapter" in the computer services manager. Then I tried the option 2, the "setspn" command was successfully executed, but when
I previewed the report again, the "PreviewProcessingService.exe
" window still popped up, and if I close it, preview the report again, there's the error shown in the "Preview" page, below is the output from VS2013,
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ReportDesigner.Design.IPreviewProcessing.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
   at Microsoft.ReportDesigner.Design.PreviewProcessingClient.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
   at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass1.<set_ItemContext>b__0(AsyncCallback ac, Object s)
   at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass3b.<ExecuteAsyncCall>b__39()
   at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteWcfCall(Action wcfCall)
   at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteAsyncCall(Func`3 beginAction, AsyncCallback endAction)
   at Microsoft.ReportDesigner.Design.WCFProcessingHost.set_ItemContext(PreviewItemContext value)
   at Microsoft.Reporting.WinForms.LocalReport.ChangeReportDefinition(DefinitionSource updatingSourceType, Action changeAction)
   at Microsoft.Reporting.WinForms.LocalReport.set_ReportPath(String value)
   at Microsoft.ReportDesigner.Design.PreviewFrame.RefreshPreview()
Hunter

Unable to reconnect to target (FP-2000) when exe vi is running

Im'not able to reconnect to target (FP2000) when a exe vi is running.
*I'm using LV 7.1 with windows XP
When I connect to the target a window pop up and ask for the vi. I always have the error message that the vi is not similar.
I tested with a basic vi (a switch and a led) and I have the same problem.
Right now I have to stop the exe vi if i want to reconnect to the FP-2000.

Hi geeaile,
This happens because the exe retrieved from your RT target and vi on your host pc don't match, as the app builder optimises the exe. To get around the 'vi's don't match problem', you need to create a folder in your host computer "c:\ni-rt\startup" and place a copy of the built executable located in your RT system (c:\ni-rt\startup folder) in the same directory on your host pc (you can do this via ftp).
Hope this helps.Message Edited by DavidT on 05-03-2005 11:35 AM

When I try to open firefox, I get a message that says, "firefox is already running" and to close it or restart my computer when it is NOT running, so I can't get on the internet through firefox. What is wrong?

The information box pops up when I click on my desktop icon for firefox as well as if I try to access it in other ways. I have restarted my computer. I have tried removing firefox and redownloading it. No matter what I do, it still gives me a box saying it is already running, but not responding. When I pull up my taks bar, it is not running! I can't close it as the box suggests because it is not open to do it. I just keep getting a box saying it is already running no matter what I try to do, even though it is not running.

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

Air 3.4 iOS Push Notification is not fired when app is not running and is not in background

Hello,
I'm making an Air iOS application which uses the iOS Push Notification from Air 3.4.
All is working perfectly except when I receive notifications when the app is not running and is not in background (The app is killed).
I suppose the RemoteNotificationEvent.NOTIFICATION must be dispatched when I receive a notification even if my app is not currently running or in background ?
Do you have already get the same issue ? Do you know what can prevent the notification to be handled ?
Thanks,
Loïc

issue has been fixed in the build available at http://labs.adobe.com/downloads/air3-5.html.
You would now have to attach listener to InvokeEvent. For cases, when application is killed, InvokeEventReason will be InvokeEventReason.NOTIFICATION. The notification payload can be accessed by the following code
protected function onInvokeEvent(event:InvokeEvent):void
     trace("Invokehandler called .... \n");
     trace("reason: " + event.reason + "\n");
     if( event.reason == InvokeEventReason.NOTIFICATION)
                    var payload:Object = Object(event.arguments[0]);
          for (var i:String in payload)
                trace("Key:value pair " + i + ":" + payload[i] + "\n");
          // TODO: DO THE NEEDFUL ON RECIEVING A NOTIFICATION HERE

Runtime engine memory increase when .exe is not running.

Similar Messages

Maybe you are looking for