Unable to reconnect to target (FP-2000) when exe vi is running

Im'not able to reconnect to target (FP2000) when a exe vi is running.
*I'm using LV 7.1 with windows XP
When I connect to the target a window pop up and ask for the vi. I always have the error message that the vi is not similar.
I tested with a basic vi (a switch and a led) and I have the same problem.
Right now I have to stop the exe vi if i want to reconnect to the FP-2000.

Hi geeaile,
This happens because the exe retrieved from your RT target and vi on your host pc don't match, as the app builder optimises the exe. To get around the 'vi's don't match problem', you need to create a folder in your host computer "c:\ni-rt\startup" and place a copy of the built executable located in your RT system (c:\ni-rt\startup folder) in the same directory on your host pc (you can do this via ftp).
Hope this helps.Message Edited by DavidT on 05-03-2005 11:35 AM

Similar Messages

Error:The specified network address is currently in use when exe file is run

I get this error(above) when i run my executable files.My exe file is in directly in c:\codes\application.exe. After this, i also like to know how do i enter the URL in a web browser to access this exe file. I have created and change the labview.ini file to application.ini and put it in the same directory as my exe file already.
Kindly provide me with a detailed solution to solve this problem. Thanks

I am not sure what you are doing but I think this is the information you are looking for:
Can I Make My LabVIEW 7.0 Executable Use Remote Front Panels?
There are several other simmlar pages on the web. I went to Advanced Search and looked for executable remote front panel .

Runtime engine memory increase when .exe is not running.

Hi,
I have built a stand alone application that on launch will pop up it's front panel, and wait for the user to click the run button.
If i look in Task Manager, i see the .exe is present and has memory allocated to it.
If i do nothing (do not click the run button), and leave the application window open, the memory allocated (as seen in Task Manager) increases (about 3mb over 24 hrs). -note, the .exe is not actually 'running' my code, as the run button has not been clicked.
1, is this normal?
2, is there anything i can do to stop it?
3, is this down to my coding? (-would seem not as my part of the .exe does not run until the run button is clicked by the user?)
I do not have experience with memory & windows handling of it.
I understand the concept of a memory 'leak' -increasing memory due to continually incremented arrays etc.
Note, i am running the Execution Trace Toolkit, and it is enabled in the .exe.
LV 2011, SP1, WIn XP. (going to upgrade soon, but have held it static as a dev platform...)
Suggestions welcome...
Thanks.

BlueTwo wrote:
1, is this normal?
No it is not. An application needing to click run before it works, is not normal. Open Microsoft Word, does it run? Do you need to click a run button? Other programs do not behave like this and neither should yours.
That being said I don't think this memory increasing by not running is normal, but I have never seen it and maybe that's because my program is either running or not. It is never in limbo where it is running but not doing anything.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Unable to reconnect to wireless network after closing lid on macbook pro

After installing recent software updates, I am unable to reconnect to my wireless network when I close the lid on my macbook. It says that it is "connected", but I can't access any website, check e-mail or ping any external server.
I've never had a problem before, but now that I've installed software updates in the past few weeks I noticed the problem.
Anyone have any ideas?
MacBook Pro (Intel) Mac OS X (10.4.9)

which ultimately means apple didn't do enough testing before releasing the last patch
This is not always, and may not be, the case. What many don't realise is that many 3rd party developers stray from the 802.11 series specifications in an attampt to boost speed and get one up on their competitors. For instance D-Link, amongst others, use a short preamble setting by default in some of their routers to improve performance. However, this is non-standard and when it comes across wireless network adapters that don't support this then you have problems. They assume that their network adapters are being used for "maximum speed and compatibility". Whether Apple should or should not support a short preamble is another subject altogether.
However, I do agree with you in that Apple should put more work into their Airport software.

Cause: Application Object Library is unable to reconnect to your gateway

After migration, When i am trying to bring up MT, i am getting following information
/u08/tech/comn/admin/scripts/OFMSTECH_oraapp09/adfmsctl.sh start
script returned:
You are running adfmsctl.sh version 115.16
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
starting forms metrics server for OFMSTECH.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/u08/tech/ora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u08/tech/ora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u08/tech/ora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /u08/tech/ora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Registry File sync...
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 1
.end std out.
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u08/tech/ora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
.end err out.

Danny,
Do you have all RPMs installed on the target node?
Is the issue with this script only?
What is the target OS version?
Please see (Note: 377217.1 - What should the value of LD_ASSUME_KERNEL be set to for Linux?).
Regards,
Hussein

Unable to reconnect mac pro wirelessly to my Epson SX515W printer?

Mac Pro is my laptop
Epson printer SX515SW
I had wireless connection
From a couple of months ago i am unable to reconnect it
Printer has wireless connection,when i try to print anything,, the computer says printer not connected , keep saying printer not connected
Please need your help badly as its making my printing miserable
Thanks for your help
Mahinda

What vrsionof OS X are you running? If it is Mavericks, the newest OS X version, there seems to be many people running that version of OS X that are having problems connecting or staying connected to there printers.

[SOLVED] Unable to hibernate (and garbles the screen when it fails)

Hello, I'm unable to hibernate (but I can suspend fine).
When I run
sudo systemctl hibernate
it will run the command, turn off the screen and come back all garbled (like static from a tv), with the computer still on but the processes stopped.
I followed all the instructions on the hibernation wiki.
I rebuilt grub adding the swap partition and added the resume hook to mkinitcpio.
My swap partition is 23.4GB and my ram is 16gb, so that shouldn't be an issue.
I've had a look at my xorg logs, run systemctl --all | grep errors with nothing, and nothing came up from the system journal ( I forgot the command as it was deleted from my bash history).
What other logs can I provide to help determine the error?
Thanks
edit:
It's been solved now, I believe an update to the kernel has done the trick. I can suspend to disk fine now.
For those googling, I'm running 3.11.6-1-ARCH
Last edited by lugubrious (2013-11-13 00:21:27)

Still nothing unfortunately.
I masked alsa90 under /etc/pm/sleep.d to be -x. That was the only file out of the pm directories. (I only have it for KDE too).
I've also double checked my grub config to add resume, and mkinitcpio which has the resume hook.
This is the relevant part of journalctl, this is when I run sudo systemlctl hibernate
Oct 16 15:36:08 arch64 sudo[2228]: lugub : TTY=pts/0 ; PWD=/home/lugub ; USER=root ; COMMAND=/usr/bin/systemctl hibernate
Oct 16 15:36:08 arch64 sudo[2228]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 16 15:36:08 arch64 systemd[1]: Cannot add dependency job for unit xscreensaver.service, ignoring: Unit xscreensaver.service failed to load: No such file or directory.
Oct 16 15:36:08 arch64 systemd[1]: Starting Sleep.
Oct 16 15:36:08 arch64 systemd[1]: Reached target Sleep.
Oct 16 15:36:08 arch64 systemd[1]: Starting Hibernate...
Oct 16 15:36:08 arch64 kernel: PM: Hibernation mode set to 'platform'
Oct 16 15:36:08 arch64 systemd-sleep[2231]: Suspending system...
Oct 16 15:36:08 arch64 slim[340]: (II) AIGLX: Suspending AIGLX clients for VT switch
Oct 16 15:36:08 arch64 kernel: PM: Marking nosave pages: [mem 0x00092000-0x000fffff]
Oct 16 15:36:08 arch64 kernel: PM: Marking nosave pages: [mem 0xcfda0000-0xffffffff]
Oct 16 15:36:08 arch64 kernel: PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
Oct 16 15:36:08 arch64 kernel: PM: Basic memory bitmaps created
The error with xscreensaver service comes up when I sleep, (and run xscreensaver lock && suspend), but I can sleep fine with it.
Oct 16 15:57:07 arch64 systemd[1]: Cannot add dependency job for unit xscreensaver.service, ignoring: Unit xscreensaver.service failed to load: No such file or directory.
Oct 16 15:57:07 arch64 systemd[1]: Starting Sleep.
Oct 16 15:57:07 arch64 systemd[1]: Reached target Sleep.
Oct 16 15:57:07 arch64 systemd[1]: Starting Suspend...
Oct 16 15:57:07 arch64 systemd-sleep[559]: Suspending system...
Oct 16 15:57:07 arch64 kernel: PM: Syncing filesystems ... done.
Oct 16 15:57:07 arch64 kernel: PM: Preparing system for mem sleep
Oct 16 15:57:08 arch64 slim[341]: (II) AIGLX: Suspending AIGLX clients for VT switch
Oct 16 15:57:17 arch64 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Oct 16 15:57:17 arch64 kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Oct 16 15:57:17 arch64 systemd[1]: Time has been changed
Oct 16 15:57:17 arch64 systemd[446]: Time has been changed
Oct 16 15:57:17 arch64 systemd-sleep[559]: System resumed.
When I ran pm-hibernate as suggested above it didn't suspend either, but this came up on journalctl
Oct 16 14:37:03 arch64 kernel: PM: Cannot find swap device, try swapon -a.
Oct 16 14:37:03 arch64 kernel: PM: Cannot get swap writer
Any ideas? Thanks
Last edited by lugubrious (2013-10-16 03:28:19)

IPhone unable to reconnect to carrier after loss of signal

Hi, my iPhone 4 is not able to reconnect to my carrier every time I leave a place that is out of coverage. Sometimes even after I restart or reboot my iPhone, it is still unable to reconnect to my carrier. It'll only reconnect to my carrier after I reset everything through my phone or restore through my PC. thanks

I've seen it but it doesn't correspond to any of the behaviour in my case. The issue was resolved when TuneUp was re-installed which I'm not comfortable with, but have to live with until I find a better solution.
If anyone comes up with a better workaround than mine, please keep me posted here.
cheers all, peace out. :-)

How Do You Solve the Xcode 6.1.1, Playground's "unable to find suitable target device"?

Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
Thank you in advance. God bless, Rev. 21:4

Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
Thank you in advance. God bless, Rev. 21:4

Unable to reconnect afp share - "sosend failed for request" error

I use rsync to synchronize an Xserve G5 (2 x2 Ghz - Mac OS X 10.3.9) from a Windows 2000 Server.
I use a script to reconnect a network share hosted by the w2k server. today system.log indicates the following lines :
Jan 11 11:53:19 XserveStudio kernel: AFP_VFS afpfs UserCommand: sosend failed for request 32
Jan 11 11:53:19 XserveStudio kernel: AFP_VFS afpfs_Reconnect started /Volumes/Studio
Jan 11 11:53:19 XserveStudio kernel: AFP_VFS afpfs_Reconnect: Wrong version 4 or no more attempts 0
I am unable to remount the share with the Finder but I can mount another share of the same server
Any idea ?
Xserve G5 2 x 2Ghz Mac OS X (10.3.9)

i had a similar problem the other day at a client's office. the solution seemed to be to remove a faulty switch between the workstation and the server.
connecting the cat5 directly to an available wall jack allowed the user to reconnect right away. before that, she was unable to reconnect after getting disconnected, and the Finder would hang, rendering the Mac useless.
how does your script connect to the server? do you explicitly use afp://... or some other syntax?

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Iphone 4s - try to install latest update ios 7.1.2 - unable to install update - an error occured when installing 7.1.2

iphone 4s - trying to install latest update ios 7.1.2 - takes long time to verify and then i get unable to install update - an error occured when installing 7.1.2?
how do I install?

First it would help if you identified the error. That might assist you in knowing what to do next. See this support document for help with error codes when unable to update or restore the iPhone. Resolve iOS update and restore errors
Then you can also see this support document for trouble with updating the device. If you can't update or restore your iOS device

I am unable to create a new email message when I connect to the internet through google

I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.

Try this. Settings>Safari>Block Pop-Ups>Off.
I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server.

Unable to reconnect to target (FP-2000) when exe vi is running

Similar Messages

Maybe you are looking for