Runtime Exceptions - CAN I PIPE THEM

I have typical problem which i believe every one might have come across while using windows98 system. When running the java application from command prompt and case of runtime exceptions thrown, the message just flies up the screen unlike in unix based system where the shell in X Servers have scroll bars to view the length.
Is there a way to pipe these run time exceptions to a text file rather than programming to handle problems of wrong coding.
I know there's some logical coding problem but if i can trace its origin i can try to debug it.
regards
Shomal

System.setErr(newPrintStream);will send anything normally bound for System.err to a print stream of your choosing. You can do the same for System.out using System.setErr(newPrintStream);Hope this is helpful...
Chris.

Similar Messages

Runtime exceptions from listeners

          When a servlet context listener throws a runtime exception, does the container
          catch it? It seems that
          the container just ignores the exception and tries to go on with life as usual.
          It does not even log the
          exception trace in the server log. Out of desperation, I finally put my entire
          contextInitialized() method
          in a try-block, and created a catch-block for RuntimeException which prints the
          exception stack-trace to
          the console.


          "Daniel Steinberg" <[email protected]> wrote:
          >
          >"Chuck Nelson" <[email protected]> wrote:
          >>
          >>Runtime exceptions can occur anywhere in a program and in a typical
          >program
          >>can
          >>be very numerous. The cost of checking for runtime exceptions often
          >exceeds
          >>the
          >>benefit of catching or specifying them. Thus the compiler does not require
          >>that
          >>you catch or specify runtime exceptions, although you can
          >>
          >>Take a look at the following link on a discussion of runtime exceptions
          >>
          >>http://java.sun.com/docs/books/tutorial/essential/exceptions/runtime.html
          >>
          >>Chuck Nelson
          >>Developer Relations Engineer
          >>BEA Technical Support
          >>
          >
          >If a servlet throws a runtime exception, the request fails and
          >exception information is written to the console and to the server
          >log. I would expect similar behavior when a listener throws a
          >runtime exception. A runtime exception generally indicates
          >a precondition violation by the client class (see Bloch,
          >Effective Java, p. 172). So when such an exception ocurrs, the
          >request should die and the developer should be informed of the
          >situation.
          >exception ocurrs, the program should die,
          >
          It seems that I'm not the only one bothered by this behavior
          (which is unspecified in the Servlet 2.3 spec).
          See Bug #4519704 in the JDC Bug Parade.

HT201272 I have purchased 11 music albums from I-Tines Store. All tracks downloaded except 12 tracks download and after few minutes vanish again of my I-pad. How can I get them to stay on my I-Pad.

I have purchased 11 music albums from i-tunes store and downloaded them on my PC. All tracks downloaded except 12 tracks download and after a few minutes vanish again of my i-pad. How can i get them to stay on my i-pad?

robcharlus wrote:
The old iTunes libraries do not restore any playlists or song counts.
They should you if you do the roll back properly... Opening files from the Previous iTunes Libraries folder in Windows Explorer simply opens the current library. If you don't see the .itl file extension then don't give your copied and renamed file the extention or iTunes will create an empty library rather than using the renamed file.
If you had a complete pre-problem backup of your library you could restore that. On the assumption that isn't possible I have a script called ExportImport that could in principle be adjusted to save the relevant data from a backup of the library database and then reimport that data into the current library. See this thread for details.
tt2

How can I know if a Exception is a runtime exception?

Here have one example:
public void writeList() throws IOException, ArrayIndexOutofBoundsException{
Here I know ArrayIndexOutOfBoundsException is a runtime exception, How can I know any other exceptions, for a unfamiliar exceptions?

just throw Exception and catch it in the try block
and print the exception u got.....that will help u...
ex:
void xxx() throws Exception
   try
   catch (Exception e)
   System.out.println(e);
}hope it may help u

CR2011 runtimes, can i download them ?

I have CRD by ChristianStevenSoftware, which we use to automate and schedule/deliver our reports.
When i upgraded to cr2011, i was told by CristianSteven software, that i had to select the correct CRYSTAL RUNTIMES.
They have a gui to use for the user to "Change Crystal Version". when i used it, i was presented with a dialog box, which
had Crystal Reports 2011(13.xx) as the latest release. I selected this option as i assumed they thought 13.xx was
correct for 2011( i know 14.xx is what i have installed.
Anyway i did not get an error after upgrading to 13.xx, but when i re-started CRD,
i get an error(if i revert back to cr2008) CRD works. I sent the CRD support person a snap of my Crystal
installed programs.
The CRD support person says :-
>>>>
The install that is in the picture looks like the installation of the crystal reports 2011 applicaton,
not the runtimes. The runtimes should be a seperate installation, please let me know if you
see any installations under add/remove programs that is labeled:
--SAP Crystal Reports runtime engine for .NET Framework 4
That should be the name showing for the 2011 runtimes. If you cannot find it in the add/remove programs,
you should be able to download the runtimes from the SAP.Com website.
<<<
I do not see "SAP Crystal Reports runtime engine for .NET Framework 4"
Can i download them from SAP site as he suggests ?

Hi John,
CR 2011 doesn't have runtime packages and as their support indicated you need to download CR for VS 2010 runtime which you can get from the bottom of this page:
http://www.sdn.sap.com/irj/boc/crystalreports-dotnet
The MSI is the easiest to use, just double click the MSI file and it should install what they need.
I'm surprised they didn't give you the link....
Thanks
Don

Can anyone solve this runtime exception

Hi dudes
I am using iText pdf converter(third party API tool) in my office. When i tried to create a dynamic pdf file, generates some runtime exceptions. It is compiling with out any problem I had run the same code in another system at my home without any problem.
I am herewith attaching the exceptions. Please give suggestion to rectify the problem
Jp
Program
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import java.io.*;
public class test{
public static void main(String args[])throws Exception{
Document d=new Document();
PdfWriter.getInstance (d, new FileOutputStream ("sample.pdf"));
d.open ();
Paragraph p = new Paragraph ("Some sample Text");
d.add (p);
d.close ();
Runtime Exception
Exception in thread "main" java.lang.InternalError: Unexpected exception while defining class com.lowagie.text.pdf.PdfPrinterGraphics2D: java.lang.ClassNotFoundException: java.awt.print.PrinterGraphics
at 0x40268e17: java.lang.Throwable.Throwable(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x4025bc8e: java.lang.Error.Error(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x402691fa: java.lang.VirtualMachineError.VirtualMachineError(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x4025d62e: java.lang.InternalError.InternalError(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x4025ac2f: java.lang.ClassLoader.defineClass(java.lang.String, byte[], int, int, java.security.ProtectionD
omain) (/usr/lib/./libgcj.so.3)
at 0x4025aa13: java.lang.ClassLoader.defineClass(java.lang.String, byte[], int, int) (/usr/lib/./libgcj.so.3)a
t 0x402f1f2e: java.net.URLClassLoader.findClass(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x40248197: gnu.gcj.runtime.VMClassLoader.findClass(java.lang.String) (/usr/lib/./libgcj.so.3)
at 0x4025a904: java.lang.ClassLoader.loadClass(java.lang.String, boolean) (/usr/lib/./libgcj.so.3)
at 0x4024889c: JvFindClass(_Jv_Utf8Const, java.lang.ClassLoader) (/usr/lib/./libgcj.so.3)
at 0x40244cdd: java.lang.Class.forName(java.lang.String, boolean, java.lang.ClassLoader) (/usr/lib/./libgcj.so
.3)
at 0x4023b4cf: JvBytecodeVerifier.verify_instructions_0() (/usr/lib/./libgcj.so.3)
at 0x40231857: JvVerifyMethod(_Jv_InterpMethod) (/usr/lib/./libgcj.so.3)
at 0x40229ae4: JvPrepareClass(java.lang.Class) (/usr/lib/./libgcj.so.3)
at 0x40248028: java.lang.ClassLoader.linkClass0(java.lang.Class) (/usr/lib/./libgcj.so.3)
at 0x4025acb3: java.lang.ClassLoader.resolveClass0(java.lang.Class) (/usr/lib/./libgcj.so.3)
at 0x4024646c: java.lang.Class.initializeClass() (/usr/lib/./libgcj.so.3)
at 0x40230912: JvInterpMethod.continue1(_Jv_InterpMethodInvocation) (/usr/lib/./libgcj.so.3)
at 0x40230ff4: JvInterpMethod.run(ffi_cif, void, ffi_raw, JvInterpMethodInvocation) (/usr/lib/./libgcj.so.
3)
at 0x4022e504: JvInterpMethod.run_normal(ffi_cif, void, ffi_raw, void) (/usr/lib/./libgcj.so.3)
at 0x4038305c: ?? (??:0)
at 0x403831e7: ffi_call_SYSV (/usr/lib/./libgcj.so.3)
at 0x403831a7: ffi_raw_call (/usr/lib/./libgcj.so.3)
at 0x402306e8: JvInterpMethod.continue1(_Jv_InterpMethodInvocation) (/usr/lib/./libgcj.so.3)
at 0x40230ff4: JvInterpMethod.run(ffi_cif, void, ffi_raw, JvInterpMethodInvocation) (/usr/lib/./libgcj.so.
3)at 0x403831e7: ffi_call_SYSV (/usr/lib/./libgcj.so.3)
at 0x403831a7: ffi_raw_call (/usr/lib/./libgcj.so.3)
at 0x402306e8: JvInterpMethod.continue1(_Jv_InterpMethodInvocation) (/usr/lib/./libgcj.so.3)
at 0x40230ff4: JvInterpMethod.run(ffi_cif, void, ffi_raw, JvInterpMethodInvocation) (/usr/lib/./libgcj.so.3)
at 0x4022e504: JvInterpMethod.run_normal(ffi_cif, void, ffi_raw, void) (/usr/lib/./libgcj.so.3)
at 0x4038305c: ?? (??:0)
at 0x40242dd8: gnu.gcj.runtime.FirstThread.call_main() (/usr/lib/./libgcj.so.3)
at 0x402ad02d: gnu.gcj.runtime.FirstThread.run() (/usr/lib/./libgcj.so.3)
at 0x4024fc4c: JvThreadRun(java.lang.Thread) (/usr/lib/./libgcj.so.3)
at 0x4021c8ac: JvRunMain(java.lang.Class, byte const, int, byte const, boolean) (/usr/lib/./libgcj.so.3)
at 0x08048910: ?? (??:0)
at 0x42015574: __libc_start_main (/lib/tls/libc.so.6)
at 0x080486c1: ?? (??:0)
at 0x4022e504: JvInterpMethod.run_normal(ffi_cif, void, ffi_raw, void) (/usr/lib/./libgcj.so.3)
at 0x4038305c: ?? (??:0)
----------------------------------------------------

What Java Virtual Machine are you using? Is it Sun's JVM or some other? Which JRE version are you using?
Mike

Crystal Runtime exception: Missing parameter values

Our company did a PeopleTools upgrade at one of our clients recently. We upgraded them to PeopleTools 8.50.08. We had to convert all the Crystal Reports to the 2008 format using the RPT converter which is included in the Client install of PeopleTools.
The only problem now is that a lot of the Crystal processes in PeopleSoft are failing with the following error:
Crystal Runtime exception: Missing parameter values.
I've checked the parameters which are being passed to the report and I see both parameters are filled:
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CTORACLE -CDHRMKPDEV -COPSDUT -CPOPRPSWD -I218609 -RP"PUP202K" -OT6 -OP"G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LGDUT -OF2 -ORIENTL "2000-10-01" "2002-06-30"
Database type is Oracle. HRMS version is 8.8. I can run the Query which gets the data in just fine and I can also run the report from Crystal fine. This only happens with Crystal reports which have a date field as a parameter/prompt in the report.
There's currently an SR open at Oracle, but I was hoping that someone here can help me nail this issue. I'm not too happy with the quallity of Oracle support, but that's a whole different story.

<s>Just to be sure, did you put a space after each parameter name or is it a typo over here ?
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CT ORACLE -CD HRMKPDEV -CO PSDUT -CP OPRPSWD -I 218609 -RP "PUP202K" -OT 6 -OP "G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LG DUT -OF 2 -OR IENTL "2000-10-01" "2002-06-30"</s>
Nicolas.
sorry, it was wrong assumption.
Edited by: N Gasparotto on Jun 2, 2010 5:11 PM

Runtime Exception for Transaction MEREP_MON

Can you please help me solving this problem?
For last 3 days I am getting runtime exception for Transaction MEREP_MON. Error description is Time limit Exceeded.
This is coming only for Direction Outbound ( When I chcking OutBound Checkbox) at the top left corner.
For Inbound and Distribution it is working fine.
I tried with MEREP_PURGe and purging all inbound and outbound data.

Hi Baskar,
I changed the mapping. I removed the ABS function. It's still throwing the same error. Now when I copy the payload from SXMB_MONI and test in Mapping in ESR, it's working fine. But the same source file throws error in SXMB_MONI. The xml that works in Test tab should certainly work in SXMB_MONI also, shouldn't it?
So I guess it is a different error.
Runtime exception occurred during application mapping com/sap/xi/tf/_MM_INFRECMASS_ECC_to_MDM_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns0:MT_INFRECMASS_Receiver/INFREC_Receiver
I must add that the INFREC_Receiver is the root node of the target file and I have kept it 0..unbounded and fields 0...1. But the source has many segements of the Idoc, so should I change them ?
Harish Babu

Runtime exception for other than programming error.

In a conversation the question arose whether it could be a case of throwing a runtime exception for anything other than a bug. The tutorial on oracle site says "These Usually Indicate programming bugs" leading to think that can be used in situations in which there is no bug.
Anyone have a practical example of a runtime exception when there is no bug?
Thanks.

937643 wrote:
Ok. But. Do you think that in these cases the use of a runtime exception could be considered a bad practice?That's actually a matter of some debate.
On the one hand, Java has defined two major kinds of exceptions since the very beginning (unchecked exceptions, which are RuntimeException, Error, and their descendants; and checked exceptions which are everything else). The intended use of those was that checked exceptions should be for things that can normally go wrong in the execution of a program, even without a bug or without a major internal JVM error, such as a failed attempt to persist something or a network connection dropping--stuff that a programmer might normally be expected to deal with; while unchecked exceptions were created for things that a programmer would not normally handle in his code (except possibly at major architectural boundaries), like buggy code or an internal JVM failure.
With the rule about having to catch or declare checked exceptions, but not unchecked ones, that makes it easy for programmers so say, "Okay, I know exactly what can go wrong here that I might be expected to handle and I can therefore choose what to do with it; there will be no surprises. But I don't have to deal with problems that are outside my normal responsibility, like somebody passing me a null when they shouldn't have." It gives a programmer a nice bit of control, and the ability to know he hasn't missed something, kind of like the type safety provided by a strongly typed language.
At least that's the theory.
In practice, most checked exceptions either just get bubbled up to the next layer (via a throws clause), or caught wrapped in a fairly generic layer-appropriate exception and rethrown. There's not a whole lot of use made of what checked exceptions provide, and there's a lot of ugly boilerplate code that doesn't do anything useful for the app but is just there to satisfy the compiler.
So, some people think that checked exceptions are useless, or mostly useless, and favor unchecked exceptions in most or all cases. I believe that's part of the philosophy of Spring, but I'm not totally sure.
The idea is that since most of the time you can't do anything about exceptions that might be thrown to you, it's wasteful and pointless to have all that code to catch and rethrow. In this viewpoint, it would be better if, for example, not providing a throws clause at all meant that you could throw any exception. Any given code can still catch specific exceptions that it knows it can handle, but we don't have to write a bunch of code notating something that we're not really doing anything about.
Personally, I used to be totally in the checked exception camp. However, all the pointless boilerplate is wearing me down. I'm still not completely convinced though, and here's why: If I'm calling a method, I'd like to at least be able to see what might go wrong, so that I can decide how to deal with it. If all exceptions were unchecked, and the throws clause were optional, a conscientious developer could still provide it, and list the unchecked exceptions his method might throw to me, and/or he could document them in the javadoc comments. But a lot of developers won't do that, or even if they start to, as their method evolves, without the compiler to enforce it, they won't keep it up to date.
So there are advantages to both approaches. I personally would to know that the information will always be available to me, but for the small percentage of the time where I actually use it (like handle one specific exception one way and some other exception differently), I'm not sure if it's worth the overhead.

ADS: SOAP Runtime Exception: CSoapExceptionFault : SOAP(100102)

HI
One of my RUSSIA Consultant ( where maximum PDF's are being used) is trying to generate a report PDF forms .
When consultant generating the required report for 1 user - the PDF form is opening,
But, When he is trying to generate for mass users (like a for a business unit around 1500 users) , he is getting the error as below
Error we are getting
ADS: SOAP Runtime Exception: CSoapExceptionFault : SOAP(100102)
FPRUNX001
Diagnosis
An error occurred when Adobe Document Services (ADS) was launched.
System Response
Error message
Procedure
When troubleshooting, follow the steps described in SAP Note 944221.
First check the connection to ADS.
You can use the program FP_PDF_TEST_00 to do this.
From SAP NetWeaver Release 7.0, the program
FP_CHECK_DESTINATION_SERVICE must also run successfully
(both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
Please note for 1 user it is working, but for mass users it is not working.
I requested them to do in slice the data and do this, but for what ever reasons, they require this in a single run (let us not challenge there why sliced runs can not work)
can any one throw some light on this issues
Rgds
PR

Hello,
Did you check SAP Note 944221?
Also check following :
On the J2EE Engine on which the ADS runs, use the Visual Administrator to check the attributes of the following specified services.
"Visual Admin -> Server -> Services -> Document Services Data Manager".
The attribute "enableSSL" must be set to "false".
If this is not the case, change and save the setting to "false". Then restart the J2EE Engine. Note that restarting only the services is insufficient in this case.
Thanks,
Ravi

Catching Runtime Exception

Is it good practice to catch High level Exception in the try block, this would also catch RuntimeException. My personal opinion is not to catch the Runtime Exception and let the JVM handle it. However if there is a need to catch specific Runtime Exception, code should be written for that.
try
// Your code
catch (Exception e)
e.printStackTrace()
}

I agree that runtime exceptions should generally not
be caught as they are mistakes of programmers.
But in order to debug a large project with hundreds of
classes it can be useful to do that anyways.
Any my big question is: how?
I tried to wrap the content of the main method in a
try / catch block hoping that I could catch all
exceptions not handled somewhere else.
But it didn't work.
I manually threw some exceptions somewhere in my GUI
and the main method wrapper didn't get them.
But the VM did and printed the exception message.
But I didn't want the VM to catch my exceptions. I
wanted to catch them myself at the lowest possible
point in my own classes.
And I thought that was the main method.
Can anyone help me?
Thank you
Matthias Klein
P.S. please excuse my improvable english; it's not my
mother tongue.AWT uses many different threads in your program that you never find out about unless something breaks. main(String arg[]) starts as the lowest possible point but, if you construct a Frame, Image, or certain other objects from the AWT package, AWT Threads automatically start over which you have little or no control.
Overall, I don't think it's actually possible to catch the Runtime Exceptions out of these Threads. The best this you can do about them is prevent them from happening.

Runtime Exception in Creating DataSink from Applet

Hi All
I am capturing screen and recording audio using JMF utilities. The application is working fine in applet viewer but as soon as I run the application from browser, a runtime exception is thrown while creating the datasink. The exact exception is "*create the DataSink: java.lang.RuntimeException: No permission to write files from applets*".
Although I am able to create files and have set read/write permissions as well.
The jar file I am using is self signed.
Please suggest what should I do.
Thanks in advance.
Best Regards
Kuldeep

This post is made assuming that my earlier assertion is correct.
user5450182 wrote:
..the thing is how would it help if someone else opens this application on his/her system from the browser. .. It Wouldn't. It would however, help the end user not to be 'spied on by web pages'. It is up to you to explain to the end user about the default option and convince them to change it.
..Would it be able to capture the user screen and.. No.
..generate the .mov file?Yes. No problem there.
Can you please explain the root cause of this problem? Which part of my explanation are you having trouble with?
.. I am newbie to applets and jmf .. That is a recipe for disaster. Applets are a PITA at the best of times. Now throw in an abandoned API on top of that, some 'high security' concerns & I can see much frustration for you.
It might make it simpler if you abandon the applet and instead use a webstart launched (J)Frame.

HT4623 I just updated my iphone 5 to the latest update: 6.1.2 After update was complete, I can no longer connect with my local network, apps no longer are transfered to my phone. I lost all of my apps and music and can't get them from my computer to my

Has anyone else had trouble with update 6.1.2 for I phone? After the update, I can't get back on my network (password is correct), ICLOUD doesn't transfer my downloads, nothing seems to work. It saved my calandar and address book, but lost all of my apps and music (except for a few songs, figure that out) and I can't get them back. Any suggestions?

I had this problem post 6.1. Not sure if it was a coincidence, but I'd just recently changed my password after being convinced I'd been hacked, due to being told I was entering my password wrongly, repeatedly by iCloud / iTunes. It turns out my iCloud account on my Settings -> Mail, Contacts and Calendars was listed as Inactive. Putting in my details, turning off Contacts over iCloud (thus deleting them) and turning them back on again, repopulated my contacts from iCloud with numbers attached to them.

I received an ipod touch 5th gen for Christmas. The first songs i've downloaded and synced with my touch have created ghost songs. They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play. I can't delete them

The first songs i've downloaded and synced with my new touch have created ghost songs. They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play. I can't delete them. I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod. It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?
I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Apps exist but can only find them thru Search

I have an iPhone 4S with nearly 400 apps on it. Until recently, those apps were arranged in 11 neat pages of icons and folders. Then this happened:
1. I updated to IOS 6. All seemed well.
2. Tired of opening folders for some apps, I decided to make a few full pages dedicated to apps I use most. So I made one full page of my favorite Photo apps, another full page Shopping apps, etc.
3. In so doing, I reached the 11 page limit, and a whole bunch of apps weren't showing up on the screen, only on Search.
4. So I started grouping stuff into folders again so that my apps only filled 7 pages. But all that did was give me 7 pages of apps and 4 BLANK pages! The missing apps are still missing and did NOT come in to fill the empty pages that I created.
5. While desperately trying to figure out any way to get all my apps back on the screen, I read on a few forums that going into Settings -> General -> Reset and resetting the home screen layout would work. So I tried that. All that did was put all of the Apple default icons on my first page, unbundle all of my apps so that there are NO folders anymore, and put all the apps in alphabetical order from A through G onto the 11 pages that are available. All apps from H to Z are not showing up -- except if I search for them.
6. So again I try to group stuff into folders to make space. I free up several pages of space, but that's all they are -- just several BLANK pages of space! My remaining apps are NOT filling into that blank space that I've created. They're still MIA.
How the heck do I get all my apps back on the screen?!
This is frustrating. Any help you can give me would really be appreciated.

If you can't find them on any of your homescreens or app folders, and you can't find them via the spotlight search screen (swipe your first home screen to the right), then are they hidden by an app age rating in Settings > General > Restrictions > Apps ?
If not then have you tried a reset to see if you can find them after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You could also do Settings > General > Reset > Reset Home Screen Layout which will re-arrange your apps and might make them easier to find

Runtime Exceptions - CAN I PIPE THEM

Similar Messages

Maybe you are looking for