RV016 Wired 16 Port Cisco Router Port Forwarding Functions
Thank you for your time. I have created and attached a Word Document discussing the Cisco Model RV016 16 port wired Router port forwarding functions for your review. I would appreciate your time in reviewing it with your comments and suggestions.
Thank you very much,
Eddie LeFiles
850-471-1271
Thank you for your time. I have created and attached a Word Document discussing the Cisco Model RV016 16 port wired Router port forwarding functions for your review. I would appreciate your time in reviewing it with your comments and suggestions.
Thank you very much,
Eddie LeFiles
850-471-1271
Similar Messages
-
Port Forwarding with Port Translation RV042, RV016, RV082
This is a feature request for the Linksys RV series Routers. Currently, it appears that the Cisco/Linksys RV042, RV082, and RV016 only support port forwarding and 1-to-1 Nat. One item that I find very helpful with customers is port forwarding with port translation. I am requesting that this feature be included with a future firmware relase for these RV series routers.
Here is an example of the request.
Take an incoming service request on a TCP or UDP destination port and forward it to an internal IP on a different TCP or UDP port. For example, customer A wants to allow different machines on the internal network to receive Windows RDP connections inbound. To make PC maintenance identical between the internal machines, the customer does not want to change the listening port for RDP on the individual PC workstations through the Windows Registry. The customer also does not want to dedicate separate IP's to each machine in a 1-to-1 NAT setup. The only option is to have remote connections to each of these PC's to use a different destination port. So, for example, PC one could be reached on TCP port 5151, PC two on TCP port 5152, and PC three on port 5153. This requres a firewall that is able to translate each of these connection requests to a different internal IP on the default RDP port (TCP 3389). So, the following setup is required:
Port Forwarding with Port Translation:
Router External IP on TCP port 5151 ---> forwarded to PC One's internal IP on TCP 3389
Router External IP on TCP port 5152 ---> forwarded to PC Two's internal IP on TCP 3389
Router External IP on TCP port 5153 ---> forwarded to PC Three's internal IP on TCP 3389
There are several comparable "small business" class router competitors to the RV042, RV082, and RV016 that will perform this port forwarding with port translation process without incident. Unfortunately, these Cisco/Linksys small business routers will not accomplish this task currently.
Please implement this feature in a future firmware release.
Thanks!Excellent. I see this now. None of our customers actually use the UPNP feature, so we never realized that Port Forwarding with Port Translation features existed on this page along with the ability to enable or disable UPNP.
Perhaps, in the future, this functionality could be moved to and incorporated into the port forwarding page which seems to be a more logical location.
In either case I'm very happy to know that this feature is available on the RV's.
Thanks for your assistance. -
Hello to all cisco experts!!
Hi guys im new here, I need ur help, I've got a Cisco small business router RV016. At first I have no problem in port forwarding because our first ISP install with simply DSL broadband modem, for some issue on our first ISP, our company acquire a new DSL connection on a different ISP. My problem now is our second ISP install to us a DSL modem with 4 ports built-in router so how can I forward a port for our Remote Desktop Connection (RDP) in our Cisco RV016 while the Public IP address is in the Second ISP router. I know I can use the port forwarding feature on our Second ISP router, but I would like to use the port forwarding in our Cisco RV016 because we also use the the VPN client access feature in our Cisco RV016.
Is there a way to solve my problem guys? I highly appreciate all your helps, thanks in advance.
Ricardo TrupaRicardo,
My name is Ismael. Iam with Small Business Support center and do appreciate you reaching out to us. From what you have described to us is that you having issue with port forwarding with RDP (3389). I am also understanding that you have a Modem/router combo from ISP and then the RV016.
For port forwarding to work, you need two rules one on your modem/router and one on your RV016 . So its source ip address will be the LAN of this modem and destination is WAN ip address of the RV180. Another rule is then configured on RV180 WAN pointing to LAN of the internal device you trying to reach. So its source ip will be the WAN on RV016 and destination will be LAN ip address of the internal device you trying to reach. This type of double port forwards can be complex and unstable. So if your network allows for configuration changes then you modem can be set to bridge mode, to simplify things and have them working for you all the time.
The single port forward can still be done, but it would require for your ISP to fully bridge your Modem. This will allow for RV016 to receive a public ip on WAN1. Once bridged only one rule is required on your RV016. Hope this helps you. -
Router Port Forwarding not working since Mavericks
I have an iMac sat behind a BT Home Hub 3 (an ADSL router, if you're not aware), with several ports (POP3, SSH, HTTP, etc) from the outside world forwarded via the hub to my Mac. Since installing Mavericks (from Snow Leopard), NONE of these ports are now open.
They're open on the Mac, and another machine on my home network can use them locally, but from outside the network, they're hidden. Shields Up shows them as Stealth.
Things I've tried:
Rebooting everything.
Setting the Home Hub up again, forwarding all the ports again.
Turning all the sharing off in Mavericks and then back on.
Trying the same services on different ports.
Trying different services.
Turning off the Mac firewall.
Turning off the router firewall.
Trying the Mac on another IP address and reforwarding everything to the new one.
Putting the Mac in the DMZ.
I can forward ports to other devices on my network (e.g. my NAS) and they work fine, so port forwarding isn't completely broken on the router
Here's the thing though...
On a completely separate network, on a separate Mac (a 2012 MacBook Pro) that went from Mountain Lion to Mavericks, also behind a BT Home Hub 3, EXACTLY the same thing is happening. No ports can be forwarded to the MacBook Pro, but all the ports are open to the local network.
Any ideas? I'm pretty sure this must be a bug in Mavericks as I can't see anything else it can be.It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.
-
RV215W router port forwarding not working
RV215W router port forwarding not working.
Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.
I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
Dave Gritten
IT Director
Maritime Beauty
3695 Barrington St
Halifax NS B3K 2Y3
cell 902.223.9685
phone 902.429.8510 ext231
fax 902.422.7983
[email protected]
www.MaritimeBeauty.comIt's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.
-
Hi,
i have a little problem with the configuration of my rvs 4000 router;
1 - I have purchased 8 static ip address with my adsl contract, from 213.136.137.234 to 213.136.137.241
2 - wan settings of my rvs4000 are like below:
Connection Type:
Static IP
Interface:
Up
IP Address:
213.136.137.234
Subnet Mask:
255.255.255.248
Default Gateway:
213.136.137.233
DNS1:
62.94.0.41
DNS2:
62.94.0.42
3 - now my problem; i have already configured several port fowarding using "single port forwarding" function of my router but with this metho i can only forward internet request arriving to 213.136.137.234. How can i do port forwarding for my other ip addresses?
Thank youWith this router, you will not be able to port forward to those public ip addresses. This router does not support that function. What you would need is one of our rv series routers, like the rv042, rv082, or the rv016. With these devices you can do what is called one to one nat and reference a public address to a private address behind the firewall. The rvs4000 router does not have that function.
-
How to Port Forward on Cisco 1900 Router?
We have a cisco 1900 router. I m new to cisco routers commands, recently started learning. I need to forward all requests coming from port 1723 from outside to inside server ip. I check "show running-config" and I see already forwarded ports and ip like below,
ip nat pool onlyone xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx netmask 255.255.255.252
ip nat inside source list 1 pool onlyone overload
ip nat inside source static tcp 192.168.0.xx 22 xxx.xxx.xxx.xxx 22 extendable
ip nat inside source static tcp 192.168.0.xx 80 xxx.xxx.xxx.xxx 80 extendable
ip nat inside source static tcp 192.168.0.xx 80 xxx.xxx.xxx.xxx 96 extendable
ip nat inside source static tcp 192.168.0.xx 443 xxx.xxx.xxx.xxx 443 extendable
ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is public facing IP.
so what is the command to add "ip nat inside source static tcp 192.168.1.xx 1723 <public-ip> 1723 extendable" to currnetly working settings?
I am currently reading below but no luck so far...
http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/software_configuration.pdf
I have found this
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic7
interface ethernet 0
ip address 172.16.10.1 255.255.255.0
ip nat inside
!--- Defines Ethernet 0 with an IP address and as a NAT inside interface.
interface serial 0
ip address 200.200.200.5 255.255.255.252
ip nat outside
!--- Defines serial 0 with an IP address and as a NAT outside interface.
ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
!--- Static NAT command that states any packet received in the inside
!--- interface with a source IP address of 172.16.10.8:8080 is
!--- translated to 172.16.10.8:80.
How do I know if "interface ethernet 0" and "interface serial 0" will work for me?the router is already setup and working for 2 years. all i need to do add a simple port forward from public ip to internal server. Following make sense to accomplish what i m trying to do. Lets assume 1.2.3.4 is my office public static ip and 192.168.0.10 is my internal server. All requests will come from some Ip lets say 25.24.23.22:1723 to 1.2.3.4:1723 and router will forward this request to 192.168.0.10:1723. This is all i m trying to accomplish. I m not setting up a new router. Some rules are already there. Therefore below seem to be what i need. All I need is how to identify "interface ethernet 0" & "interface serial 0". I understand the inside and outside details. All i have to find is how to replace ethernet 0 and serial 0 with what i have in my router setup.
interface ethernet 0
ip address 172.16.10.1 255.255.255.0
ip nat inside
!--- Defines Ethernet 0 with an IP address and as a NAT inside interface.
interface serial 0
ip address 200.200.200.5 255.255.255.252
ip nat outside
!--- Defines serial 0 with an IP address and as a NAT outside interface.
ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
!--- Static NAT command that states any packet received in the inside
!--- interface with a source IP address of 172.16.10.8:8080 is
!--- translated to 172.16.10.8:80. -
I have an RV016 router with 2 Fibre WAN connections on it. I have two internal servers with resources I need available externally.
I would like WAN1 to forward port 443 to server 1 and WAN2 to forward port 443 to server 2.
It does not appear this is possible as you do not have the option to select which WAN port you want the port forwarding for and can only forward ALL traffic on 443 to one internal server.
Does anyone know if this is possible or not?
ThanksHi Wbtadmin1,
You can use Port access translation which you can translate the port for example if you have two server listen in the same port such 443 , with port access translation you can choose an external port and internal port.
configuration :
Please follow this steps:
1. Please remove the rule of the port forwarding
2. Go to Setup under UPnP , service management and you will see external port and internal port so please configure external port to xxx and internal to 443 and click add, please do not enable UPnP
3. on the same page please choose the service you created and put the internal IP of the server A
4. for the second rule is the same just change teh external port to yyy and in internal 443 and put the second server B as internal IP
if you want to access to server A : publicIP:external port xxx
if you want to access to server B : publicIP:external port yyy
Now we want to restrict Client to access to server A from WAN 2 and allow only from WAN1
Under Firewall -- Access Rules
- Allow service (you can create custom service for external port xxx) from WAN1 to Server A
- seconds Access rules Deny Service (custom service xxx) from WAN 2 to Server A
- The same for server B
N.B : for Protocol Binding is working from LAN to WAN it means if you want to force Server A to communicate outside through WAN 1 or WAN 2
Please rate the post or mark it as answered to help other Cisco customers
Thanks
Mehdi -
Cisco ASA 5512, IP NVR port forwarding
Hi,
i have Cisco 5512 ASA with version 8.6(1)2. i have one IP NVR for ip cameras.
please help me how to configure port forwarding in cisco asa in CLI?
I have static IP on ASA 94.56.178. 222 and NVR IP 10.192.192.100
thank you so much.ASA#
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 94.56.178.222 255.255.255.255 identity
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7fffa2969000, priority=0, domain=permit, deny=true
hits=11524, user_data=0x9, cs_id=0x0, use_real_addr, flags=0x1000, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
input_ifc=OUTSIDE, output_ifc=any
Result:
input-interface: OUTSIDE
input-status: up
input-line-status: up
output-interface: NP Identity Ifc
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
please advise -
Port Forward in Cisco series 800
Dear Support
below the configuration of Cisco Series 800 Router that Has VDSL port of internet , the configuration as below :
i add three command
what is required in order to make port forward
ip nat inside source static tcp 8000 10.10.10.10 8000 dilar 0
ip nat inside source static tcp 554 10.10.10.10 554 dilar 0
ip access list extended 100
permit ip any any
what is required to make port forward to the local ip address 10.10.10.10 from outside interface that is VDSL port ?
! Last configuration change at 10:47:44 KSA Wed Apr 22 2015 by aamalsup
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime
service password-encryption
hostname AamalNet
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret level 2 5 $1$Y4PF$K6TQ5wf0gcHiO5IxvLZba0
enable secret level 5 5 $1$WZeO$BzTCl0C0e1078CWxExJK0/
enable secret 5 $1$plq6$P5HVL/tR81cs0GFDrD.0V/
aaa new-model
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authentication login sdm_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network sdm_vpn_group_ml_1 local
aaa session-id common
clock timezone KSA 3 0
crypto pki trustpoint TP-self-signed-1682106276
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1682106276
revocation-check none
rsakeypair TP-self-signed-1682106276
crypto pki certificate chain TP-self-signed-1682106276
certificate self-signed 02
30820250 308201B9 A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31363832 31303632 3736301E 170D3032 30333031 30303038
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 36383231
30363237 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C2F3 49897460 71FEB259 7794B7C6 D398958A 2D338F0F C69F0E75 1137B16C
C261A275 8416DAF6 FC19AA6E 50024019 66CE4DB8 3AFAB6FE CE892B42 86A93490
97259E47 D740B2F4 9AA2D307 7B676841 2CAAA879 D945A6FD 717B507F 77399332
1644CEDE 884BF133 ACFBBC80 9869A104 54CC3EEE 9D521378 EC762D86 C3F0ABC9
CA990203 010001A3 78307630 0F060355 1D130101 FF040530 030101FF 30230603
551D1104 1C301A82 18417761 6C416D61 6C792E61 77616C6E 65742E6E 65742E73
61301F06 03551D23 04183016 80149ADD A651C9F9 F8369354 5C904777 090FEB75
72E0301D 0603551D 0E041604 149ADDA6 51C9F9F8 3693545C 90477709 0FEB7572
E0300D06 092A8648 86F70D01 01040500 03818100 50ACCA98 1A5FCCAD FC61D703
A8589B02 AFB8CD47 BD1CC7B0 B095C97F AA0604A8 F8495053 C8A9CBB9 644F5674
318A7AA0 873250AD 1DE28CE2 BE21ED19 BF212CF7 E2A97CFB FFA62F1E 643CEDFE
90D02109 719FD4D3 98E6C40B D61CE89C D2426C1E 3CBD9FBE 397F7F7C F1DD279E
14F8BB2D ABFA784B 6E04274B EDCBFC8F A805E91D
quit
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 10.10.11.1
ip dhcp pool lan
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
dns-server 212.93.192.4 212.93.192.5
lease 0 2
ip dhcp pool wireless
import all
network 10.10.11.0 255.255.255.0
default-router 10.10.11.1
dns-server 212.93.192.4 212.93.192.5
lease 0 2
no ip domain lookup
ip domain name aamal.net.sa
ip name-server 212.93.192.4
ip name-server 212.93.192.5
no ipv6 cef
cwmp agent
enable download
enable
session retry limit 10
management server password 7 094D4308151612001D05072F
management server url http://aamalservice.aamal.net.sa:9090
license udi pid C887VA-W-E-K9 sn FCZ17459018
archive
log config
hidekeys
username k privilege 15 password 7 020D
username admin privilege 15 password 7 14161606050A
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group aamalnet
key aamalnet
dns 212.93.192.4 212.93.192.5
include-local-lan
dhcp server 10.10.10.1
max-users 10
netmask 255.255.255.0
crypto isakmp profile sdm-ike-profile-1
match identity group aamalnet
client authentication list sdm_vpn_xauth_ml_2
isakmp authorization list sdm_vpn_group_ml_1
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile SDM_Profile1
set security-association idle-time 60
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
bridge irb
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 0/35
pppoe-client dial-pool-number 1
interface Ethernet0
no ip address
shutdown
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip unnumbered Dialer0
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface wlan-ap0
description Embedded Service module interface to manage the embedded AP
ip unnumbered Vlan1
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Vlan2
no ip address
bridge-group 2
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname [email protected]
ppp chap password 7 0007145E2E5A05522E1858
no cdp enable
interface BVI2
ip address 10.10.11.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 1 permit 10.10.11.0 0.0.0.255
access-list 23 permit 212.93.196.0 0.0.0.255
access-list 23 permit 212.93.192.0 0.0.0.255
access-list 23 permit 212.93.193.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 23 permit 10.10.11.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
snmp-server community private RW
snmp-server community public RO
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee
bridge 2 route ip
privilege interface level 5 encapsulation
privilege interface level 5 description
privilege interface level 5 no encapsulation
privilege interface level 5 no description
privilege interface level 5 no
privilege configure level 5 ip route
privilege configure level 5 interface
privilege configure level 5 controller
privilege configure level 5 ip
privilege exec level 5 copy running-config tftp
privilege exec level 5 copy running-config
privilege exec level 5 copy
privilege exec level 5 write memory
privilege exec level 5 write
privilege exec level 5 configure terminal
privilege exec level 5 configure
privilege exec level 5 show processes cpu
privilege exec level 5 show processes
privilege exec level 2 show running-config
privilege exec level 5 show configuration
privilege exec level 2 show
privilege exec level 5 clear counters
privilege exec level 5 clear
banner exec
CC
% Password expiration warning.
Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
banner login
CC
********STC AamalNet Service****************************************
********Authorize Access Only. For more Support Call 909************
line con 0
privilege level 15
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
stopbits 1
line vty 0 4
access-class 23 in
privilege level 2
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 20000 1000
endHello,
Sure.
What version are you running?
Regards, -
Router won't save settings of Single Port Forward or Port Range Forwarding
Hi everyone, I'm having a bit of trouble tonight trying to get my Playstation 3 to play games online and in doing so I'm attempting to enable Single Port Forwarding and or Port Range Forwarding.
To start, I am using this link below this paragraph as a guide.
http://portforward.com/english/routers/port_forwarding/Cisco/Linksys-E1000/PS3_Endless_Saga.htm
Each time I go and set the settings and click save, it tells me the settings have been saved successfully then when I click continue onto the next page it shows they actually haven't saved at all. My router is out of it's 90 day phone support with Linksys and I refuse to pay anything extra for support so I'm hoping someone else will be able to help me with my issue since they refuse to unless I pay them.Hello. Sucks you ran into trouble just after PSN got back online
Try clearing your cache / cookies then re-do the settings. Also, try using a different Internet browser. -
Setting up router for port forwarding - WRT54G
Hi all. I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?
After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?
Please assist! Thanks!IIt;s usually to set the static IP outside the DHCP range like you said. You can use the router's DHCP reservation feature to set a "static IP", and as for your last question, you can find different methods on how to do that by searching the web.
I don't work for Cisco. I'm just here to help. -
Help: Port forward in Cisco SOHO 97
Hi there!
I have a Cisco SOHO 97.
The IP is: 10.0.0.1/24
Gw: 0.0.0.0
*Default route via DIALER1
I also have a RV042 configured as VPN Server (PPTP and IPSec).
The IP is: 10.0.0.2/24
I need help to configure the router to I be able to connect to VPN server from OUTSIDE-WORLD.
I imagine I need Port forwarding from Cisco SOHO to RV042.
I hope for possibles answers!
Thanks!Sorry i found the issue.
The problem was that, i wanted to redirect port 443 (https) to an private address.
But by default port 443 is reserved to access ASA via https for management.
I just reserved another port 888 for https management access and now i can redirect port 443 normaly as i wanted.
Using this command: http server enable 888
Germain -
HELP!! Cisco RV180 Port Forwarding
Someone please advise as to this is the first time I've tried to setup port forwarding using the Cisco RV180 Router. I have a Cisco RV180 Router, a Ruckus 7055 access point and a power distribution unit. I'd like to be able to access the router remotely and also the devices behind the router (the ruckus access point and the power distribution unit). I'm assuming that I'll need to assign the Cisco RV180 router a static IP address and I'm assuing that this static address should be assigned to the WAN port? I'd also like to configure port forwarding so that I can access the ruckus and the PDU remotely also. I've tried assigning a static IP address to the WAN port of the RV180 but I cannot ping this device remotely. Anyone have any advice on accessing the RV180 remotely? I've populated all of the correct fields for the WAN settings (ip, gateway, subnet, etc.) , and my static ip address is valid.Thank you in advance.
Hello sirflex,
As you have mentioned you need to configure a static nat for the devices which you have done when you configure a port forwarding.
Have you configured access rules under firewall>access Rules. Add the access rules for the ping and the Http and Https services.
Can you capture the packets at the WAN port while you are pinging the WAN port and the firmware version on the device.
Which mode are you running the device gateway or router. You can check it under Netwroking>Routing>Routing Mode.
Thanks,
Prithvi
Please mark answered and rate for helpful posts. -
Cisco Ironport S160 Port forwarding
Hi,
We've got a device within the network which needs to send data out to a website on port 5009. We've setup the following to allow the traffic
- Identity with the interal IP as member and bypass the proxy (the device can only be configured with the Proxy IP and port, no logins)
- Added Port 5009 n HTTP Ports to Proxy
- Added the destination IP n L4 Traffic allow list
We are still not able to route the traffic.
We then tried to get the traffic coming in the other way. We've asked the ISP to put in a port forwarding to forward traffic on Port 5019 to the device. This is also not working. We can get to the device on the internal Port without any issues. The question does the IronPort need to be configured to allow the traffic coming in? We dont have any other incoming port forwarded traffic.Hello,
I will need a quick explanation on how your environment is laid out for your Web Content Appliance.
1. Is your proxy transparent or explicitly proxied? Do you have multiple proxies that you are load balancing?
2. If it is explicit, do you use a PAC file or is the proxy configured in the network configuration?
3. If it is transparent, what do you use to redirect traffic? Is it wccp or L4 redirection? What kind of device are you using to redirect traffic? ASA, Catalyst, Nexus, something else?
4. Is there any third party devices being used between the proxy and the clients or between the proxy and the outside world?
5. What are your authentication requirements? How are you authenticating them (NTLMSSP, TUI, or Basic)?
Thank you for answering these questions.
Christian Rahl
Customer Support Engineer
Cisco Web Content Security Appliance
Cisco Technical Assistance Center RTP
Maybe you are looking for
-
How to print an output stream on console.
Hi, I am new to JAVA. I am trying to execute a command in runtime and I want to print the output on console and also redirect the output to a file. Could anyone please help me? This is what I wrote : Runtime rt = Runtime.getRuntime(); Process proc =
-
Hi, I'm using ISE and I want to redirect https traffics to one web-page. so I used cisco-av-pair = url-redirect=test123 also, test123 is existed in WLC with deny https any deny any https permit ip any any however, it does not redir
-
Serializing calls to ABAP server proxies
Hi I have a following scenario - SOAP client ( EOIO)--> XI IS --> XI Adapter --> (EOIO ) R3 The objective is to create a material in R3 based on the SOAP client call onto a XI Webservice . XI Integration server uses a ABAP server proxy ( async , t
-
Today, 3/7/13 I receive the below email from [email protected], with every incoming email. I would like to know the cause and how to correct it. Is anyone else experiencing this? Thanks so much for your help! This report relates to a message you
-
Adding A Business Process To SolMan
Hi, I've just upgraded our Solman system to EHP1 SPS22 and I'm now looking at business process monitoring. From documentation I've seen you go into DSWP and select your solution and away you go, I've also seen mention of transactions solar01/02. I se