RW-50015: Error: - HTTP Listener is not responding -- on resh installation

Hi
I am trying to install R12.0 version on RHEL4 (VMWARE on windows).
While installation i am getting error while validating system configuration (for HTTP, Virtual Directory, Login Page,JSP and Help page)
Error is
HTTP checking url http://r12.loclhost:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
when i try to $INST_TOP/admin/scripts/adstrtal.sh apps/apps am getting error for opmn,form service.
opmn log file says.
getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
when i try to check $INST_TOP/logs/ora/10.1.3/Apache/ for error log and access log , i could not find any file in this location.
bash-3.00$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
192.168.3.1 R12.localhost R12
I hope some issue with http service, kindly help me.
Thanks
Krishna

bash-3.00$ adopmnctl.sh start
You are running adopmnctl.sh version 120.4
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/admin/log/adopmnctl.txt for more information ...
bash-3.00$ adopmnctl.sh status
You are running adopmnctl.sh version 120.4
Checking status of OPMN managed processes...
Unable to connect to opmn.
Opmn may not be up.
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/adm in/log/adopmnctl.txt for more information ...
03/05/11-23:25:28 :: adopmnctl.sh version 120.4
bash : vi mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/adm in/log/adopmnctl.txt
03/05/11-23:25:28 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
opmnctl: opmn start failed.
03/05/11-23:25:35 :: adopmnctl.sh: exiting with status 2
Kindly help me to resolve this issue.
Thanks
Krishna

Similar Messages

Rapid install - RW-50015:HTTP Listener is not responding

Hello -
I am getting the following error while installing the oracle apps via rapid install.
RW-50015:HTTP Listener is not responding
Regards
Mahesh Mattupalli

Hi,
thanks for the responce. the following is the error portion of the autoconfig file.
i actually ran autoconfig script after unlocking the apps user. still there many places script is erroring out due to account is locked.
any help would be greatly appreciated.
regards
Mahesh Mattupalli
Starting AutoConfig at Mon Oct 1 11:35:14 2007
Using adconfig.pl version 120.16
Classpath :
/d01/oracle/PROD/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/PROD/apps/apps_st/comn/java/classes
===========================================================================
Starting Utility to Report Version Conflicts at Mon Oct 01 11:35:33 PDT 2007
Using VersionConflictListGenerator.java version 120.3
All driver files processed.
No version conflict encountered.
===========================================================================
Using Context file : /d01/oracle/PROD/inst/apps/PROD_erpdev/appl/admin/PROD_erpdev.xml
Attempting to create a back up of the Context file
Created back up file of name :
/d01/oracle/PROD/inst/apps/PROD_erpdev/admin/out/10011135/PROD_erpdev.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /d01/oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /d01/oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/custom/adxmlctx.tmp
Custom template : Not available
Customizations found : None
File system Context file :/d01/oracle/PROD/inst/apps/PROD_erpdev/appl/admin/PROD_erpdev.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in
DataBase and in the file system may be unsynchronized
===========================================================================
~~~~~~~~~~~~~
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erpdev.mahesh.com)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=PROD.mahesh.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erpdev.mahesh.com)(PORT=1521))(CONNECT_DATA=
(SERVICE_NAME=PROD.mahesh.com)))
Connection could not be obtained; returning null
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Generate Tns Names
Logfile: /d01/oracle/PROD/inst/apps/PROD_erpdev/admin/log/10011135/NetServiceHandler.log
ERROR: can't open log file: /d01/oracle/PROD/inst/apps/PROD_erpdev/admin/log/10011135/NetServiceHandler.log:
Permission denied
.end std out.
.end err out.
Result : FAILED
===========================================================================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~``
adgendbc.sh started at Mon Oct 1 11:45:55 PDT 2007
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Oct 1 11:45:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: ERROR:
ORA-28000: the account is locked
Params=fnd_jdbc_buffer_min=1
fnd_jdbc_buffer_max=5
fnd_jdbc_buffer_decay_interval=300
fnd_jdbc_buffer_decay_size=5
fnd_jdbc_usable_check=false
fnd_jdbc_context_check=true
fnd_jdbc_plsql_reset=false
Unique constraint error (00001) is OK if key already exists
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Database connection to jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=
(PROTOCOL=tcp)(HOST=erpdev)(PORT=1524)))(CONNECT_DATA=(SID=PROD))) failed
ADD call failed with exit code 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~```
Configuring OCM in : /d01/oracle/PROD/inst/apps/PROD_erpdev/ocm/10.1.2/
Executing: /d01/oracle/PROD/inst/apps/PROD_erpdev/ocm/10.1.2//ccr/bin/setupCCR -s 2253545 [email protected] US
** Installing base package **
** Registering installation with Oracle Configuration Manager server(s) **
Script Exit Code: 1
OCM configuration failed for : /d01/oracle/PROD/inst/apps/PROD_erpdev/ocm/10.1.2/
OCM configuration failed on mid tier.
ERRORCODE = 0 ERRORCODE_END
.end std out.
Deploying core - Version 10.2.4.0.0
Failure in registering with Oracle Configuration Manager server
Unable to establish connection to Oracle Configuration Manager server.
Oracle Configuration Manager endpoint hostname (ccr.oracle.com) is unknown.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~``
AutoConfig is exiting with status 31
The log file for this session is located at: /d01/oracle/PROD/inst/apps/PROD_erpdev/admin/log/10011135/adconfig.log
~

RW-50015: ERROR ..HTTP listener is not responding

Hi Experts,
I'm a newbei to Oracle EBS R12, I was in a process of installing R12 (12.1.1.9 ) on Red Hat Enterprise Linux Server release 6.0 (64 bit).
R12 Rapidwiz Postinstall Steps Http, Login page, Virtual directory, JSP, Help Page Fails with RW-50015
After installation, the database checks were fine and the database & listener processes are running fine.
When i try to start the application services manually it show this error
[applmgr@oracleupk scripts]$ ./adstrtal.sh
You are running adstrtal.sh version 120.15
Enter the APPS username: apps
Enter the APPS password:
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstrtal.sh <appsusername/appspassword>
adstrtal.sh: exiting with status 1
I crosschecked apps credentials are right and database is up and running.
SQL> conn apps/*****
Connected.
SQL> sho user
USER is "APPS"
I crosschecked Database and listener of D/B both are running.
[oracle@oracleupk ~]$ ps -ef | grep tns
oracle 13923 1 0 Apr05 ? 00:00:00 /u01/db_top/db/tech_st/11.1.0/bin/tnslsnr PROD -inherit
SQL> !ps -ef | grep smon
oracle 5571 1 0 03:49 ? 00:00:01 ora_smon_PROD
While trying to connect to sqlplus through applmgr user i get the following error.
[applmgr@oracleupk PROD_oracleupk]$ sqlplus
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
I reviewed the installation doc to make sure all OS software packages and pre-req are installed as per [ID 761566.1]
While investigating the issue, i found that the post install steps fails mainly because of missing gcc-* rpm package. But it is already installed in my case.
[oracle@oracleupk ~]$ rpm -qa gcc*
gcc-c++-4.4.7-3.el6.x86_64
gcc-4.4.7-3.el6.x86_64
I have followed these metalink notes but still issue persists, Please assist me so that i can finish up the installation before deadline. :(
Adcfgclone Fails With Error While Loading Shared Libraries: libclntsh.so.10.1 [ID 736410.1]
Installing Rel 12.0.4 Ebuisines Suite autoconfig fails with: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]

Hello,
All this indicates a failed install.
The best way to fix this is to clean out the install, make sure the OS complies 100% with Note 761566.1 : "Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64", and then install again.
If this runs in error create a Service Request with Oracle Support.
Regards, Carlo den Otter.

The http listener is not running in domain-name on port 8889

hi
I have installed oracle database 10g and developer suite 10g on my Windows OS
the database is connected to developer
but when running the form an error getted that said:-
frm 10142
The http listener is not running in domain-name on port 8889 . please start the listener or check your runtime preferences.
please help.
thanks in advance

Normally it should show as 8889, y is it showing 12320???
Did you restart your OC4J and rerun your Forms?
Also follow this link.
This might help you.
10g, FRM-10142: the http Listener is not running on <server> at port 8889,
Thanks and regards

FRM-10142- The HTTP listener is not working in mypa at port 9001 in form11g

I new in forms 11g and I upgrading the forms 6i to 11g and I installed the forms11g successfully when I run the form after compiling it it give me the error.
*"FRM-10142- The HTTP listener is not working in mypc at port 9001. Please start the Listener or check your runtime setting"*
In form runtime preference I modified the web browser location to C:\Program Files\Internet Explorer\IEXPLORE.EXE.
Your Suggestions will be appreciated
Thanks in advance.

Hello,
The WLS managed server WLS_FORMS must be started .
You can use a BAT script containing the following command lines to start it :
title WLS_FORMS
set DOMAIN_HOME=D:\oracle\fmw11g\user_projects\domains\ClassicDomain
cd %DOMAIN_HOME%\bin
set SERVER_NAME=WLS_FORMS
call setDomainEnv.cmd
cd %DOMAIN_HOME%\bin
set WLS_USER=weblogic
set WLS_PW=password
call startManagedWebLogic.cmd WLS_FORMS http://127.0.0.1:7001
Regards

I get an error code of firefox not responding on my pc

I have windows vista ultimate 64bit installed on both my pc and my laptop. I recently went through an upgrade for firefox and kaspersky on both of my computers. My laptop is functioning as always, however, everytime I go into firefox on my pc I get an error code "firefox is not responding". I do not get this code with internet explorer and have neve had this problem before. I have uninstalled both firefox and kaspersky and then reinstalled both to no avail. If you know of a fix for this please let me know as I really like firefox.

Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your problem, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Error TNS: listener does not curnetly jnow of service requested in connect

hello
i get error TNS: listener does not curnetly jnow of service requested in connect descriptor
when i write tnsping ora920 i get
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-└┬├.
-2010 23:26:55
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
C:\Users\fg>

784633 wrote:
hello
i get error TNS: listener does not curnetly jnow of service requested in connect descriptor
when i write tnsping ora920 i get
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-└┬├.
-2010 23:26:55
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
That's not the same error you reported in the thread subject ....
A TNS-03505 is very much like a 12154.
=================================
ORA-12154: TNS:could not resolve the connect identifier specified
This error means one thing, and one thing only. The client could not find the specified entry in the tnsnames.ora file being used.
As a follow-on to that statement, remember that when you use a dblink, the database in which the link is defined is acting as a client to the database that is the target of the link. So in this case, the tnsnames.ora file on the host of your source should have an entry for your target db, as defined in the db_link.
And for the umpteenth time ... this error has NOTHING to do with the status of a listener. The connection request never got far enough to reach a listener. If anyone tells you to check a listener in response to ora-12154, they are not paying attention, or do not understand how TNS works. This error is the equivalent of not being able to place a telephone call because you don't know the number of the party you want to reach. You wouldn't debug that situation by going to the other guy's house and testing his telephone, or by going to the phone company and testing the switchboard. And you don't debug a ORA-12154 by checking the listener. If I had a top ten list of "Incredibly Simple Concepts (tm)" that should be burned into the brain of everyone who claims to be an Oracle DBA, it would include "ORA-12154 Has Nothing To Do With The Listener".
=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
 (CONNECT_DATA =
 (SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
=====================================
C:\Users\fg>

The device PCI 6036E: Analog Input error:"the device is not responding to the base address",Output :No signal

I am using PCI 6036E DAQ card, DAQ 6.9.2. , I have not connected to any external device.
When I tested card(in Test Panel of MAX2.2,DAQ 6.9.2) an error appearing �the device is not responding to the base address� � then I pressed Yes, Then TestPanel window appearing�
In analog Input Tag, there is an error �-10805�. This error also appearing when I run the standard analog input samples (use Delphi 6.0).
I tested analog output functions in TestPanel, Delphi Examples, LabView 6.1. There are not error appearing but there is not output signal (using Oscilloscope to see).
Output, Input digital functions are working correctly.
Next I try to foll
ow all the instruntions as recommended:
-Changing TO another slots PCI
-Reinstall Os WinXP,98SE�
-Use another Computer�
But all of the cases are still not working.(the above error still appeared, no output signal)

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Listener Does not Respond

I am having an issue with a listener . All of a sudeen , listener stopped responding .
When I was doing lsnrctl stat , I was getting "TNS-01189" . When I reloaded the listener , I am getting the same error .
I am on 11g r2 on windows 2008 r2 64 bit .
Thanks in Advance.
C:\Users\Administrator>lsnrctl reload
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-OCT-2010 20:29
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=198.6.432.35)(PORT=1521)
TNS-01189: The listener could not authenticate the user
C:\Users\Administrator>lsnrctl reload
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-OCT-2010 20:30
:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
The command completed successfully
C:\Users\Administrator>

01189, 00000, "The listener could not authenticate the user"
// *Cause: The user attempted to issue a privileged administrative command, but
// could not be successfully authenticated by the listener using the local OS
// authentication mechanism. This may occur due to one of the following
// reasons:
// 1. The user is running a version of LSNRCTL that is lower than the version
//    of the listener.
// 2. The user is attempting to administer the listener from a remote node.
// 3. The listener could not obtain the system resources needed to perform the
//    authentication.
// 4. The local network connection between the listener and LSNRCTL was
//    terminated unexpectedly during authentication message exchange, such as
//    if LSNRCTL program was suddenly aborted.
// 5. The communication between the listener and LSNRCTL is being intercepted
//    by a malicious user.
// 6. The software that the user is running is not following the authentication
//    protocol, indicating a malicious user.
// *Action: Make sure that administrative commands are issued using the LSNRCTL
// tool that is of a version equal or greater than the version of the listener,
// and that the tool and the listener are running on the same node. You can
// issue the VERSION command to find out the version of the listener.
// If a malicious user is suspected, use the information provided in
// the listener log file to determine the source and nature of the requests.
// Enable listener tracing for more information. If the error persists,
// contact Oracle Support Services.are you 100% CERTAIN that ORACLE_HOME is correct?
are there more than one ORACLE_HOME on this system?
Handle:      user11142794
Status Level:      Newbie
Registered:      May 7, 2009
Total Posts:      68
Total Questions:      33 (23 unresolved)
so many questions & so few answers.
Edited by: sb92075 on Oct 18, 2010 6:05 PM

Error "web pages are not responding"

What is the cause of this Safari error? What needs to be done to prevent it?
"Web pages are not responding. To reload this webpage, all pages in other tabs and windows must also be force reloaded. Do you want to reload this page?
Force reloading might cause you to loose information you have entered"
Several threads reference it when it occurs after performing various kinds of actions, and the author's ascribe it to their particular operation, but obviously it is a more general error.

> look under "User Diagnostic Reports"
No entrys exist in that area. Looks like the system cleaned itself up earlier today:
11/11/11 1:06:49 PM SubmitDiagInfo[3887] Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2011.10.12.asl
Using OSX 10.6.8 and Safari 5.1.1
After posting my message I performed the latest Software Update.
But my question is also general -- what are the causes of this error? I have read assertions that it relates to the newest Flash Plugin, or Java, etc. but I would like an authoritative explanation. How can something cause ALL tabs to need to be reloaded? Is it caused by something on a web page, or by something internal like the cache getting too large or corrupted or what?
This error is associated with extremely high % of CPU time being taken up by Safari Web Content.

Imessage internal error on start up/not responding - mac

Hi,
Unfortunately I'm having another problem, this time with the imessage application.
When I open the app, the imessage window does not open up. When I double click the application it says "application not responding" I then force quit. One forcing the quit I try reopening the app, the same thing happens again!
I changed the preferences for the app to open at login, so when I shut it down and reopen it 'has to' open. But this does not happen and a message appears 'internal error' or something like that and then it quits on me and suggests I reopen the app. I did reopen it the same issue still occurs.
The only time the app opens is when i get a notification of a message from the notification centre, I click to open. It only opens up normally after like 15 minutes of waiting and works fine. But when i quit the app the same original problem occurs.
Looking forward to any suggesting
Thanks
Katherine

Please read this whole message before doing anything.
Back up all data.
Quit Messages if it’s running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (either may not exist):
Caches/com.apple.Messages
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try Messages again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit Messages again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
Test. If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
Step 3
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.iChat
com.apple.imdsmsrecordstore
com.apple.imessage
com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

Oracle error: The listener could not find any available service handlers...?

I'm running Coldfusion 8 and Oracle XE 10, both on IIS 7.
Every so often, I get this message:
[Macromedia][Oracle JDBC Driver][Oracle]ORA-12519 The
listener could not find any available service handlers that are
appropriate for the client connection. One possible cause for this
error is that the server was not configured for the specified
server type (shared/dedicated).
I can restart the OracleServiceXE service and it works fine.
However, I have no clue what is causing this. I believe it all
began once I started using CFSCRIPTS and running queries using that
instead of CFML. Would anyone know what COULD cause this error to
happen and what I should look out for? I am new to Oracle and CF
btw.
Also, I can access it fine through the oracle homepage, but
when I attempt to connect to it from the coldfusion administrator,
it cannot establish a connection to that data source. It is only
after I restart the service that things go back to normal. Thanks.
Ryan

Hello,
Can you provide output of the following? Any other errors along with this error in alert.log file? Also your listener.ora and tnsnames.ora?
lsnrctl>set displaymode verbose
lsnrctl>services your_listener_name
lsnrctl>status
$> sqlplus '/as sysdba'
sql> select * from v$resource_limit;Regards
Edited by: OrionNet on Jan 14, 2009 10:17 PM
Edited by: OrionNet on Jan 14, 2009 10:22 PM

CF error: The listener could not find any available service handlers...?

I'm running Coldfusion 8 and Oracle XE 10, both on IIS 7. Every so often, I get this message:
[Macromedia][Oracle JDBC Driver][Oracle]ORA-12519 The listener could not find any available service handlers that are appropriate for the client connection. One possible cause for this error is that the server was not configured for the specified server type (shared/dedicated).
I can restart the OracleServiceXE service and it works fine. However, I have no clue what is causing this. I believe it all began once I started using CFSCRIPTS and running queries using that instead of CFML. I know this isn't a coldfusion forum, but would anyone know what COULD cause this error to happen and what I should look out for? I am new to Oracle and CF btw. Thanks.
Ryan

Hi rpeters83 and 396167,
Did you find a solution for this?
We have ColdFusion 7.0.2 connecting to an Oracle Database 10 R2 and we just got this error when executing a ColdFusion component.
This is the first time we see this error and this CF/Oracle setup has been working fine for a long time.
Thanks.

Annoying error 2: ViewController may not respond to -enableBBI

Developers,
This is my second annoying error. The code works fine, but i get the following error message when i run the app "viewcontroller may not respond to -enableBBI".
The code i am using is below and i have placed ///Error/// next to parts of the code that trigger the error. The part of the code that shows an error is used to enable a Bar Button item.
Is there anything i can do to prevent this? or does it not really matter?
Ray, i am hoping you will have a quick glance over this. The code is something you gave me in the past. Perhaps you have a solution?
james
-(IBAction)NextItem {
int count = [flashCards count];
if (counter < count - 1) {
NSDictionary *nextItem = [self.flashCards objectAtIndex:++counter];
Label1.text = [nextItem objectForKey:Question_KEY];
[self enableBBI]; ////Error//////
-(IBAction)PreviousItem {
if (counter > 0) {
NSDictionary *nextItem = [self.flashCards objectAtIndex:--counter];
Label1.text = [nextItem objectForKey:Question_KEY];
[self enableBBI]; ////Error//////
- (void)enableBBI {
int count = [flashCards count];
next.enabled = counter < count - 1 ? YES : NO;
prev.enabled = counter > 0 ? YES : NO;
flip.enabled = count > 0 ? YES : NO;
Message was edited by: james_coleman01

See xnav's suggestion, then add the following at the end of the file and move enableBBI inside:
@implementation YourViewControllerName (PrivateMethods)
- (void)enableBBI
@end
Using categories in this way is just a trick to simulate private methods in Objective-C. That way, you can define your methods where you want in the file without having to put them into the header file for all the world to see.
You can create new categories for any class, including Cocoa classes like NSString, etc.
Message was edited by: etresoft

Reader dos not respond after update installation

My system is Win7 and yesterday after installation of an update for my Reader 10.0 version the program does not respond. I tried to uninstall and reinstall it many times but the result is always the same: when I double click onto the Reader symbole, the icon appears for 5 seconds trying to load the program and then disappears.
How to proceed?

Two more things to try...
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

RW-50015: Error: - HTTP Listener is not responding -- on resh installation

Similar Messages

Maybe you are looking for