RW-50015: Error:

Fuckup Oracle Apps... 12.1.1 on RHEL 5.4...
If you do not have Patch 6078836 pls do not try to setup above version... I have wasted 2 months for downlaod and pre-reqs.. pld do not laugh...... it is reality which faced.. on OTN... if you search my ID you will get more than 200... because of bloddy OTN supporter they are kidding and wasting of professional......
They are asking following and even you provide eveything then received some message eg..
1. Pls send the Log file
- If send log file then there is one more mail will get pls send not more than 20 lines -- here 2 mails you received then
2. pls send the Apps Version and OS Version... when you send details
- will get response e.g. it generic error...... but you will not get proper or specific solution still go a head....
3. When you follow the same guys then will get one more mail pls keep in touch with Mr. Hussen..
If you follow to Mr Hussen... again get message pls check the link send by Mr Hussen.....nothing is there in link.. it only query by member...
Finally you will get frustrations..........
but do not say without Patch it not possible or you should use this... and this verision......
Its my humble request if you have specific patch for specific verion pls go a head or get support from your friends.. but do not belive...... OTN fellows..
Mr Hussen or Mr. Helios
All the best...

Dude, this is the Oracle Lite forum. Take a chill pill and relax. Clear your thoughts and be a little bit more constructive instead of destructive.
Totally not cool and quite immature.

Similar Messages

  • RW-50015 error occured in R12.1.1 installation

    Hi All,
    I am installing oracle apps R12 in my vmware machine(OS:redhat 4,R12.1.1).
    Type of installation:single node
    Db user:oracle
    Application User:applmgr
    metalink note followed:Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
    -Database Installation was successful.I checked the logfiles.Autoconfig completed succesfully.
    -It fails while installing application.At the end it returns the below error.
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button(same error for Help page,jsp also ).
    Checked the log files of applications.Autoconfig has completed with error.
    [CVM Error Report]
    The following report lists errors encountered during CVM Phase
    <filename> <return code where appropriate>
    /apps/j01/VIS/apps/apps_st/appl/ad/12.0.0/bin/adgentns.pl
    No of scripts failed in CVM phase: 1
    I tried to run autoconfig manually in the application tier,but it is hanging.I am not able to connect to the database as applmgr.
    tnsping is also taking very high time.If I restart the db listsner,then for few miniutes tnsping is working fine.but after that it is taking high time.Please help me to solve this issue.
    Thanks
    Jvel

    Hi,
    Timed out( 300000 ): Interrupted Exception
    But when I tired to connect in sqlplus ,it is taking 5 to 10 mininutes to connectIt is evident that sqlplus is taking more than Time Out. So autoconfig is failing
    Do you have enough hardware resources.??? How much is your RAM, Cpu Speed, Enough disk space ?????
    Please make sure you have atleast 4GB RAM.
    Thanks

  • RW-50015: Error: - HTTP Listener is not responding -- on resh installation

    Hi
    I am trying to install R12.0 version on RHEL4 (VMWARE on windows).
    While installation i am getting error while validating system configuration (for HTTP, Virtual Directory, Login Page,JSP and Help page)
    Error is
    HTTP checking url http://r12.loclhost:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    when i try to $INST_TOP/admin/scripts/adstrtal.sh apps/apps am getting error for opmn,form service.
    opmn log file says.
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    when i try to check $INST_TOP/logs/ora/10.1.3/Apache/ for error log and access log , i could not find any file in this location.
    bash-3.00$ cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    192.168.3.1 R12.localhost R12
    I hope some issue with http service, kindly help me.
    Thanks
    Krishna

    bash-3.00$ adopmnctl.sh start
    You are running adopmnctl.sh version 120.4
    Starting Oracle Process Manager (OPMN) ...
    adopmnctl.sh: exiting with status 2
    adopmnctl.sh: check the logfile /mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/admin/log/adopmnctl.txt for more information ...
    bash-3.00$ adopmnctl.sh status
    You are running adopmnctl.sh version 120.4
    Checking status of OPMN managed processes...
    Unable to connect to opmn.
    Opmn may not be up.
    adopmnctl.sh: exiting with status 0
    adopmnctl.sh: check the logfile /mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/adm in/log/adopmnctl.txt for more information ...
    03/05/11-23:25:28 :: adopmnctl.sh version 120.4
    bash : vi mnt/ext/applvis/inst/apps/VIS_r12/logs/appl/adm in/log/adopmnctl.txt
    03/05/11-23:25:28 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    opmnctl: opmn start failed.
    03/05/11-23:25:35 :: adopmnctl.sh: exiting with status 2
    Kindly help me to resolve this issue.
    Thanks
    Krishna

  • RW-50015: ERROR ..HTTP listener is not responding

    Hi Experts,
    I'm a newbei to Oracle EBS R12, I was in a process of installing R12 (12.1.1.9 ) on Red Hat Enterprise Linux Server release 6.0 (64 bit).
    R12 Rapidwiz Postinstall Steps Http, Login page, Virtual directory, JSP, Help Page Fails with RW-50015
    After installation, the database checks were fine and the database & listener processes are running fine.
    When i try to start the application services manually it show this error
    [applmgr@oracleupk scripts]$ ./adstrtal.sh
    You are running adstrtal.sh version 120.15
    Enter the APPS username: apps
    Enter the APPS password:
    adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
    USAGE: adstrtal.sh <appsusername/appspassword>
    adstrtal.sh: exiting with status 1
    I crosschecked apps credentials are right and database is up and running.
    SQL> conn apps/*****
    Connected.
    SQL> sho user
    USER is "APPS"
    I crosschecked Database and listener of D/B both are running.
    [oracle@oracleupk ~]$ ps -ef | grep tns
    oracle 13923 1 0 Apr05 ? 00:00:00 /u01/db_top/db/tech_st/11.1.0/bin/tnslsnr PROD -inherit
    SQL> !ps -ef | grep smon
    oracle 5571 1 0 03:49 ? 00:00:01 ora_smon_PROD
    While trying to connect to sqlplus through applmgr user i get the following error.
    [applmgr@oracleupk PROD_oracleupk]$ sqlplus
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    I reviewed the installation doc to make sure all OS software packages and pre-req are installed as per [ID 761566.1]
    While investigating the issue, i found that the post install steps fails mainly because of missing gcc-* rpm package. But it is already installed in my case.
    [oracle@oracleupk ~]$ rpm -qa gcc*
    gcc-c++-4.4.7-3.el6.x86_64
    gcc-4.4.7-3.el6.x86_64
    I have followed these metalink notes but still issue persists, Please assist me so that i can finish up the installation before deadline. :(
    Adcfgclone Fails With Error While Loading Shared Libraries: libclntsh.so.10.1 [ID 736410.1]
    Installing Rel 12.0.4 Ebuisines Suite autoconfig fails with: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]

    Hello,
    All this indicates a failed install.
    The best way to fix this is to clean out the install, make sure the OS complies 100% with Note 761566.1 : "Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64", and then install again.
    If this runs in error create a Service Request with Oracle Support.
    Regards, Carlo den Otter.

  • Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

    New Installation of R12.1.1 on Linux x86-64
    using zip files from e-delivery
    created staging dir successfully
    Ran rapidwiz
    selected new Installation and Express Installation
    Rapidwiz worked and installed all files but it failed at the end during validation for post install
    when showed screen for Validate System Config the post-install check:
    I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
    details of error:
    HTTP
    checking URL = http://localhost.localdomain:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    some other facts,
    I cannot run sqlplus, no access to database.
    it seems environemt variables are not set as echo shows empty value.
    since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
    tried solution 1:
    I was able to run APPSVIS_localhost.env
    however i canNOT connect to sqlplus
    therefore no access to database:
    pwd
    /d01/oracle/VIS/apps/apps_st/appl
    [root@localhost appl]# chmod 777 APPSVIS_localhost.env
    [root@localhost appl]# ./APPSVIS_localhost.env
    [oracle@localhost appl]$ ./APPSVIS_localhost.env
    [applmgr@localhost appl]$ ./APPSVIS_localhost.env
    [applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
    [applmgr@localhost bin]$ ./sqlplus
    ./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    [applmgr@localhost bin]$
    when echo oracle env variables they are all empty:
    for example:
    [oracle@localhost scripts]$ echo $APPL_TOP
    Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
    couldn't even use script v as I got error:
    [oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
    [oracle@localhost scripts]$ ls adst*
    adstpall.sh adstrtal.sh
    [oracle@localhost scripts]$ ./adstpall.sh apps/apps
    You are running adstpall.sh version 120.10
    adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
    USAGE:      adstpall.sh <appsusername/appspassword>
    adstpall.sh: exiting with status 1
    also in another question in forum
    RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
    it is asked to try this:
    ... commented out the following line:
    #eval ohs_start -DSSL "$args"
    ... and replaced it with:
    eval ohs_start "$args"
    I have not tried this, i think my issue is with database and sql which cannot be accessed.
    solution 2:
    Tried workaround from Note 943443.1
    but first i cannot see any file with # ls libdb*:
    [root@localhost inst]# cd /usr/lib
    [root@localhost lib]# ls libdb*
    ls: cannot access libdb*: No such file or directory
    after running the command from the Note:
    [root@localhost lib]# pwd
    /usr/lib
    [root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
    now, I can see libdb.so.2:
    [root@localhost lib]# pwd
    /usr/lib
    [root@localhost lib]# ls libdb*
    libdb.so.2
    then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
    but still fails with same error:
    HTTP
    checking URL = http://localhost.localdomain:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    solution 3:
    tried to stop and restart services:
    [oracle@localhost VIS_localhost]$ pwd
    /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
    [oracle@localhost VIS_localhost]$ ls -ltr add*
    -rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
    -rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
    [oracle@localhost VIS_localhost]$ ./addbctl.sh stop
    You are running addbctl.sh version 120.1
    Shutting down database VIS ...
    sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    addbctl.sh: exiting with status 127
    [oracle@localhost VIS_localhost]$ ./addbctl.sh stop
    You are running addbctl.sh version 120.1
    Shutting down database VIS ...
    sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
    addbctl.sh: exiting with status 127
    your help is highly appreciated
    thank you!

    Thank you
    items 1, 2 and 3 are answers to your questions,
    I think you pointed to an important section as i have feeling something is
    wrong with this simple default choice of localhost.localdomain.
    please also see #4 as it has new information (the rapidwiz error are fixed now
    but i still don't have access to anything)
    1-) file: /etc/hosts
    i have 2 lines in this file
    [oracle@localhost etc]$ pwd
    /etc
    [oracle@localhost etc]$ cat hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost.localdomain localhost localhost6.localdomain6
    [oracle@localhost etc]$
    2-) file: /etc/sysconfig/network
    i have 2 lines in this file:
    [oracle@localhost sysconfig]$ pwd
    /etc/sysconfig
    [oracle@localhost sysconfig]$ cat network
    NETWORKING=yes
    HOSTNAME=localhost.localdomain
    3-) per step 3- of note 761564.1 I deleted file (using root accout):
    /etc/sysconfig/networking/profiles/default/network
    (before deleting i made a backup network-bak, just in case):
    [oracle@localhost default]$ pwd
    /etc/sysconfig/networking/profiles/default
    [oracle@localhost default]$ ls -ltr
    total 16
    -rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
    -rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
    -rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
    -rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
    [oracle@localhost default]$
    4-)
    I made so many changes to dir access permissions using chmod 777,
    also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
    after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
    the errors),
    then I clicked Next button ( which of course went to the same screen I had error on )
    then I clicked on Retry button and it appeared it fixed errors.
    Rapidwiz confirmed all sections are ok,
    no errors anymore.
    (Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
    then Retry button).
    I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
    but right now, I completed rapidwiz and all errors are fixed,
    however I still don't have access to anything:
    Started firefox and try to go to:
    http://localhost.localdomain:8000/QA_HTML/AppsLogin
    it says Unable to connect
    (by the way do I have to download IE and try in there or should it work in Firefox as well ?)
    I am unable to run sqlplus
    I don't have anyvalue in the environment variables, they are still empty.
    I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
    2.2
    [oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
    AutoConfig completed with errors.
    2.3
    [oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
         Configuring IES_TOP.......COMPLETED
         Configuring CSD_TOP.......COMPLETED
         Configuring IGC_TOP.......COMPLETED
    AutoConfig completed with errors.
    still same problem, didn't change results.
    Thank you for your help!

  • RW-00023: Error:  DBC file was not created- When try to install 11i on OEL5

    I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
    DBC File Check
    RW-00023: Error: - DBC file was not created:
    File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    HTTP Check
    checking URL = http://oracleapp1.srini.co.uk:8000
    RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    PHP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    PHP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    Hi JD,
    I am able to fix this issue.....:-) Thanks for your help JD.
    As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
    above issue in the instalation of oracle 11i on OEL5
    --Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
    (db tier)
    <DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
    (apps tier)
    <APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
    --run  the autoconfig in apps tier with completed successfully result (and also generated the  DBC files)
    --run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
    --This time everything checked OK in the instalation wizard.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Errors During Post Install Check on Ubuntu 12.04

    Hello Gurus,
    I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. I patched the HTTP server with 6078836 (Copied libdb.so.2 to /usr/lib).
    I did the md5sum check before starting the install. I completed the kernel settings as per the note below:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
    Contents of /etc/hosts
    127.0.0.1           localhost.localdomain      localhost
    192.168.1.101     erpbeginner.dyndns.org     erpbeginner
    Installation went smooth till the Post install checks where it fails for the following:
    HTTP
    JSP
    Login Page
    Help Page
    Virtual Directory
    Contents of the log file:
    command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
    riwTDBup.sh started at Tue Oct 16 07:30:46 EDT 2012
    Parameters passed are : /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /d01/r12/VIS/db/tech_st/11.1.0
    ORACLE_SID : VIS
    TWO_TASK :
    PATH : /d01/r12/VIS/db/tech_st/11.1.0/perl/bin:/d01/r12/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:.
    LD_LIBRARY_PATH : /d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/r12/VIS/db/tech_st/11.1.0/ctx/lib
    Executable : /d01/r12/VIS/db/tech_st/11.1.0/bin/sqlplus
    riwTDBup.sh exiting with status 0
    Database ORACLE_HOME connection test has succeeded
    command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
    riwTDBup.sh started at Tue Oct 16 07:30:47 EDT 2012
    Parameters passed are : /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /d01/r12/VIS/apps/tech_st/10.1.2
    ORACLE_SID :
    TWO_TASK : VIS
    PATH : /d01/r12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
    LD_LIBRARY_PATH : /d01/r12/VIS/apps/tech_st/10.1.2/lib32:/d01/r12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/d01/r12/VIS/apps/apps_st/appl/sht/12.0.0/lib
    Executable : /d01/r12/VIS/apps/tech_st/10.1.2/bin/sqlplus
    riwTDBup.sh exiting with status 0
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : erpbeginner
    sDbDomain : dyndns.org
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@erpbeginner.dyndns.org:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.3/VIS_erpbeginner.env
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env
    APPL_TOP environment file passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/VIS_erpbeginner.env
    ADOVARS environment file passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/admin/adovars.env
    APPSCONFIG passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/admin/adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/appl/fnd/12.0.0/secure/VIS.dbc
    HTTP
    checking URL = http://erpbeginner.dyndns.org:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    When I search for the library "libclntsh", I found 3 matches to libclntsh.so.11.1,libclntsh.so.10.1 and libclntsh.so.
    Only libclntsh.so.11.1 is a file and rest are symbolic links to this file which seem to be broken.
    So I tried to redo the symbolic links and did a retry for the post install checks which failed again.
    Can somebody please shed some light on this?
    Best Regards,
    Richie

    I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. Please note that this OS is not certified.
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directoryPlease see the suggested solution in (Installing R12.0.4 Ebuisines Suite Autoconfig Fails With: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]). Also, please make sure you have all RPMs installed as per (Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit) [ID 416305.1]) and follow all post installation steps.
    Thanks,
    Hussein

  • Oracle R12 Installation Error - Validate System Configuration

    Hello,
    I was doing the oracle apps R12 installation and got this error
    =======================
    Validate System Configuration
    The post-install check inspects your system for a complete installation.
    The list below shows the tests that were performed and the results.
    Click on the test icon for details.
    One or more of the post-install tests did not succeed for this:
    Database Availability
    HTTP
    Virtual Directory
    Login page
    Configuration Upload
    Help page
    JSP
    =======================
    I’ve checked the details which are listed below.
    Please help me in solving the issue :(
    Configuration Upload
    uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
    Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
    Database Availability
    command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
    riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
    Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
    ORACLE_SID : TEST
    TWO_TASK :
    PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
    LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
    Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
    riwTDBup.sh exiting with status 3
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
    riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
    Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
    ORACLE_SID :
    TWO_TASK : TEST
    PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
    LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
    Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
    riwTDBup.sh exiting with status 2
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
    Help Page
    checking URL = http://erp.tez.co.in:8009/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    HTTP
    checking URL = http://erp.tez.co.in:8009
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    Hi,
    I think my linux was corrupted :(
    I've done fresh linux installation and after that the R12 installation is complete without any issues :D
    Thanks for you help Hussein Sir

  • Installing Oracle Applications E-Business Suite R12  error

    hi everyone
    i have error while installing Oracle Applications E-Business Suite R12 on Windows server 2003 R12
    plz help me
    this is log file:
    Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
    Processing Step 3 of 5
    Step 1 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
    Processing Step 4 of 5
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
    instantiate file:
    source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    instantiate file:
    source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
    Database Availability
    command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    'E:\Oracle' is not recognized as an internal or external command,
    operable program or batch file.
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1
    command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    'E:\Oracle' is not recognized as an internal or external command,
    operable program or batch file.
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
    Configuration Upload
    uploading config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : erp
    sDbDomain : erp
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
    Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
    Failed upload of config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
    Environment File
    RW-50016: Error: - Database ORACLE_HOME environment file was not created:
    File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
    RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
    File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
    RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
    File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
    RW-50016: Error: - APPL_TOP environment file was not created:
    File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
    RW-50016: Error: - ADOVARS environment file was not created:
    File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    RW-50016: Error: - APPSCONFIG was not created:
    File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    RW-00023: Error: - DBC file was not created:
    File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://erp.erp:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://erp.erp:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drvYou cannot use spaces in the directory/file names, so I believe those errors are because you are using a space in the directory name (Oracle R12) -- Please change the directory name to another name with no space (i.e. OracleR12) and retry the installation then.
    Thanks,
    Hussein

  • R12 Rapidwiz Error

    Hi Hussein,
    I am using RHEL 5.3 for R12.1.1.1 Installation
    This is Ajaz Ahmed. Thanks for your timely help. I was using this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1] to Install R 12.1.1.1. as per your reply and the recommended document I
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).. I started to install. Prior to that I completed
    all the pre-requisites. When running ./rapidwiz from the Stage12/startCD/Disk1/rapidwiz folder as a root user I get the following error.
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /mnt/hgfs/Stage12/startCD/Disk1/rapidwiz/jre/Linux/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.load0(Unknown Source)
    at java.lang.System.load(Unknown Source)
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    I am not able to proceed further. What can be the issue this time.
    Best Regards
    Ajaz Apps
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

    Hi Hussein,
    Earlier I was Installing with this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1]. Error Rectified.
    As per your suggestion I installed the R 12.1.1.1. using Red Het Entp. Linux 5.3 using the recommended document
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
    As per Note: 761564.1 document also I got the same error
    The installation is completed after all the 5 steps. During the post install task
    For the system checks there were errors in
    RHEL 5.3 Errors
    1) HTTP
    checking URL = http://r12vis.apps12.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    2) Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    3) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    4) Help Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    5) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    From the other terminal window I stopped and restarted all the appstier services.
    There after during the retry option of installation for system checks only two errors
    Remained which are
    1) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    2) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    When I click next button I get the following message
    RW-10001 – RapidWizard Install had detected that your configuration has errors
    You must resolves these issues before continuing
    As no other alternative left I press the cancel button.
    After bouncing the linux service I started the DB Tier and Apps tier, but again I face the same problem of JSP and Login Page.
    I logged on to application as applmgr and thru the path
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/bin
    I run the ./opmnctl status command which gave me the error
    Unable to connect to opmn.
    Opmn may not be up.
    So I started the services using
    ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    GETHOSTBYNAME(ap6004bld.us.oracle.com): 2
    ================================================================================
    opmn id=r12vis.apps.com:6001
    0 of 3 processes started.
    ias-instance id=APPS_C_HOME.ap6004bld.us.oracle.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=7473)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/HTTP_Server~1
    ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
    Error
    --> Process (pid=7472)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCache~1
    ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
    Error
    --> Process (pid=7466)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCacheAdmin~1
    After that I stopped the Apps tier. Logged in sys ‘as/sysdba’ and unlocked the apps account.
    Started the Apps tier. But again I was not able to login.
    After that I stopped the Apps tier, keeping the DB Tier ip. And run the Autoconfig from Apps Tier path /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/scripts
    sh adautocfg.sh
    I get the error as AutoConfig completed with errors.
    /d02/oas/oracle/OASDB/db/tech_st/10.2.0/appsutil/log/OASDB_testappsdb/06300116/adconfig.log
    Enter the APPS user password:
    The log file for this session is located at: /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/log/06300418/adconfig.log
    AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
    Using CONFIG_HOME location : /d01/oracle/VIS/inst/apps/VIS_r12vis
    Classpath : /d01/oracle/VIS/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/VIS/apps/apps_st/comn/java/classes
    Using Context file : /d01/oracle/VIS/inst/apps/VIS_r12vis/appl/admin/VIS_r12vis.xml
    Context Value Management will now update the Context file
    Updating Context file...COMPLETED
    Attempting upload of Context file and templates to database...COMPLETED
    Configuring templates from all of the product tops...
    Configuring AD_TOP........COMPLETED
    Configuring FND_TOP.......COMPLETED
    Configuring ICX_TOP.......COMPLETED
    Configuring MSC_TOP.......COMPLETED
    Configuring IEO_TOP.......COMPLETED
    Configuring BIS_TOP.......COMPLETED
    Configuring AMS_TOP.......COMPLETED
    Configuring CCT_TOP.......COMPLETED
    Configuring WSH_TOP.......COMPLETED
    Configuring CLN_TOP.......COMPLETED
    Configuring OKE_TOP.......COMPLETED
    Configuring OKL_TOP.......COMPLETED
    Configuring OKS_TOP.......COMPLETED
    Configuring CSF_TOP.......COMPLETED
    Configuring IGS_TOP.......COMPLETED
    Configuring IBY_TOP.......COMPLETED
    Configuring JTF_TOP.......COMPLETED
    Configuring MWA_TOP.......COMPLETED
    Configuring CN_TOP........COMPLETED
    Configuring CSI_TOP.......COMPLETED
    Configuring WIP_TOP.......COMPLETED
    Configuring CSE_TOP.......COMPLETED
    Configuring EAM_TOP.......COMPLETED
    Configuring FTE_TOP.......COMPLETED
    Configuring ONT_TOP.......COMPLETED
    Configuring AR_TOP........COMPLETED
    Configuring AHL_TOP.......COMPLETED
    Configuring OZF_TOP.......COMPLETED
    Configuring IES_TOP.......COMPLETED
    Configuring CSD_TOP.......COMPLETED
    Configuring IGC_TOP.......COMPLETED
    AutoConfig completed with errors.
    The E-Business Home Page is located at http://r12vis.apps.com:8000/OA_HTML/AppsLogin
    If your browser doesn't automatically redirect to its new location, click here.
    what can be the other possibility ? shall I try with Red Hat Entp. Linux 4 (32-Bit) ?
    If you have some other documents please send me on my mail-id's.
    Regards
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

  • R12 Installation on Windows 2003  Error

    pl help me
    when post-install checks
    HTTP
    checking URL = http://jarry.cppw.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://jarry.cppw.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://jarry.cppw.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    logs file
    Processing DriverFile = G:\EBS\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for G:\EBS\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd
    backup : D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd to D:\oracle\VIS\apps\apps_st\appl\admin\VIS_jarry\out\templbac\adrunias.cmd
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd
    backup : D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd to D:\oracle\VIS\apps\apps_st\appl\admin\VIS_jarry\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.5 2007/01/05 00:40:23 ppradhan noship $
    G:\EBS\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\EBS\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\EBS\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\EBS\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\EBS\startCD\Disk1\rapidwiz>(set date=2007-05-24 星期四 )
    G:\EBS\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\EBS\startCD\Disk1\rapidwiz>(set time=19:30 )
    G:\EBS\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : 2007-05-24 星期四 19:30
    STARTED INSTALL PHASE : APPS TECH STACK : 2007-05-24 星期四 19:30
    G:\EBS\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java
    G:\EBS\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    G:\EBS\startCD\Disk1\rapidwiz>SET XML_FILE=D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    G:\EBS\startCD\Disk1\rapidwiz>SET PATH=G:\EBS\startCD\Disk1\rapidwiz\unzip\NT;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc
    G:\EBS\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\EBS\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\EBS\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\EBS\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPS_UNAME=%i && set APPS_PWD=%j
    G:\EBS\startCD\Disk1\rapidwiz>set APPS_UNAME=APPS && set APPS_PWD=APPS
    G:\EBS\startCD\Disk1\rapidwiz>SET APPSUSER=APPS
    G:\EBS\startCD\Disk1\rapidwiz>SET APPSPASS=APPS
    G:\EBS\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=2 )
    G:\EBS\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\jarry\LOCALS~1\Temp
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if "FALSE" == "D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_1"
    "runProcess_1"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM Perform the install for tech stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
    Statusstring Installing Applications Technology Stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx600M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -d G:\EBS\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log D:\oracle\VIS\apps\apps_st\appl\admin\VIS_jarry\log\ApplyAppsTechStack.log -nthreads 2 -verbose
    Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
    Checking Disk contents in - G:\EBS\startCD\Disk1\rapidwiz
    Checking Disk contents in - G:\EBS\oraAS\Disk1
    Checking Disk contents in - G:\EBS\oraAS\Disk1
    Unzip Count:40
    Processing Disk1....
    Processing Disk2....
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_2"
    "runProcess_2"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM Perform the registration for tech stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx512M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -stage G:\EBS\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at D:\oracle\VIS\inst\apps\VIS_jarry\admin\log\ApplyAppsTechStack_05241934.log
    | 0% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 9% completed
    - 9% completed
    \ 9% completed
    | 9% completed
    / 9% completed
    - 9% completed
    \ 9% completed
    | 9% completed
    / 9% completed
    - 9% completed
    \ 9% completed
    | 9% completed
    / 9% completed
    - 9% completed
    \ 9% completed
    | 9% completed
    / 9% completed
    - 9% completed
    \ 9% completed
    | 9% completed
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :REG_OK
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_3"
    "runProcess_3"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM Perform the Configuration for tech stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo Statusstring Configuring Applications Technology Stack
    Statusstring Configuring Applications Technology Stack
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx512M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -stage G:\EBS\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
    Log file located at D:\oracle\VIS\inst\apps\VIS_jarry\admin\log\ApplyAppsTechStack_05241939.log
    | 0% completed
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :CFG_OK
    C:\DOCUME~1\jarry\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(set date=2007-05-24 星期四 )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(set time=19:39 )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : APPS TECH STACK : 2007-05-24 星期四 19:39
    FINISHED INSTALL PHASE : APPS TECH STACK : 2007-05-24 星期四 19:39
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo Applications Technology Stack install run complete.
    Applications Technology Stack install run complete.
    D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunias.cmd has succeeded
    Step 1 of 5
    Command: D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd
    Processing Step 4 of 5
    Executing: D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM $Header: adrunat.cmd 120.7 2007/02/08 16:39:19 marderiu noship $
    G:\EBS\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\EBS\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\EBS\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\EBS\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\EBS\startCD\Disk1\rapidwiz>REM
    G:\EBS\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\EBS\startCD\Disk1\rapidwiz>(set date=2007-05-24 星期四 )
    G:\EBS\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\EBS\startCD\Disk1\rapidwiz>(set time=19:39 )
    G:\EBS\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPL TOP : 2007-05-24 星期四 19:39
    STARTED INSTALL PHASE : APPL TOP : 2007-05-24 星期四 19:39
    G:\EBS\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java
    G:\EBS\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar
    G:\EBS\startCD\Disk1\rapidwiz>SET XML_FILE=D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    G:\EBS\startCD\Disk1\rapidwiz>SET PATH=G:\EBS\startCD\Disk1\rapidwiz\unzip\NT;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc
    G:\EBS\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\EBS\startCD\Disk1\rapidwiz>set CMDDIR=G:\EBS\startCD\Disk1\rapidwiz
    G:\EBS\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\EBS\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\EBS\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPS_UNAME=%i && set APPS_PWD=%j
    G:\EBS\startCD\Disk1\rapidwiz>set APPS_UNAME=APPS && set APPS_PWD=APPS
    G:\EBS\startCD\Disk1\rapidwiz>SET APPSUSER=APPS
    G:\EBS\startCD\Disk1\rapidwiz>SET APPSPASS=APPS
    G:\EBS\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=2 )
    G:\EBS\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\jarry\LOCALS~1\Temp
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if "FALSE" == "D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_1"
    "runProcess_1"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM install APPL_TOP
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Statusstring Installing APPLTOP - gappl.drv"
    "Statusstring Installing APPLTOP - gappl.drv"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx512M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -d G:\EBS\startCD\Disk1\rapidwiz\driver\appl\driver\gappl.drv -pwd no_password_here -log D:\oracle\VIS\apps\apps_st\appl\admin\VIS_jarry\log\installAppl.log -nthreads 2 -verbose
    Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 1 :
    Checking Disk contents in - G:\EBS\startCD\Disk1\rapidwiz
    Checking Disk contents in - G:\EBS\oraApps\Disk1
    Checking Disk contents in - G:\EBS\oraApps\Disk1
    Unzip Count:1114
    Processing Disk1....
    Processing Disk2....
    Processing Disk3....
    Processing Disk4....
    Processing Disk5....
    Processing Disk6....
    Processing Disk7....
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :runProcess_2
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_2"
    "runProcess_2"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM update Context to latest level
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Statusstring Copying the APPL_TOP Context template file."
    "Statusstring Copying the APPL_TOP Context template file."
    C:\DOCUME~1\jarry\LOCALS~1\Temp>rem G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx512M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.autoconfig.InstantiateFile -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -d G:\EBS\startCD\Disk1\rapidwiz\driver\appl\driver\gappl.drv -pwd APPS -log D:\oracle\VIS\apps\apps_st\appl\admin\VIS_jarry\log\installAppl.log -nthreads 2 -verbose
    C:\DOCUME~1\jarry\LOCALS~1\Temp>COPY G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\admin\template
    已复制 1 个文件。
    C:\DOCUME~1\jarry\LOCALS~1\Temp>COPY G:\EBS\startCD\Disk1\rapidwiz\etc\adctxinf.tmp D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\admin\template
    已复制 1 个文件。
    C:\DOCUME~1\jarry\LOCALS~1\Temp>COPY G:\EBS\startCD\Disk1\rapidwiz\etc\index.html D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\admin\template
    已复制 1 个文件。
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM COPY $\jlib\java\oracle\apps\ad\context\CloneContext.class D:\oracle\VIS\apps\apps_st\comn\java\classes\oracle\apps\ad\context
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :runProcess_3
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_3"
    "runProcess_3"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM run registration steps on APPL_TOP
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Statusstring Registering APPL_TOP"
    "Statusstring Registering APPL_TOP"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\EBS\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;G:\EBS\startCD\Disk1\rapidwiz\jlib\java;G:\EBS\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\EBS\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.ApplyApplTop -e D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml -stage G:\EBS\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at D:\oracle\VIS\inst\apps\VIS_jarry\admin\log\ApplyApplTop_05242025.log
    | 0% completed
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 0 == 0 goto :runProcess_4
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "runProcess_4"
    "runProcess_4"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM run AutoConfig on Apps Node
    C:\DOCUME~1\jarry\LOCALS~1\Temp>REM
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Statusstring run AutoConfig on Apps Node"
    "Statusstring run AutoConfig on Apps Node"
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if "" == "No Database" goto :NO_DB
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(echo APPS ) | CALL D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin\adconfig.cmd contextfile=D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml noprompt
    Enter the APPS user password: AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
         Using CONFIG_HOME location : D:\oracle\VIS\inst\apps\VIS_jarry
         Classpath : D:\oracle\VIS\apps\apps_st\comn\java\lib\appsborg2.zip;D:\oracle\VIS\apps\apps_st\comn\java\classes
         Using Context file : D:\ORACLE\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    Context Value Management will now update the Context file
         Updating Context file...COMPLETED
         Attempting upload of Context file and templates to database...COMPLETED
    Context Value Management Complete. Check Logs for details
    ECHO 处于关闭状态。
    ECHO 处于关闭状态。
    2007-05-24 星期四 20:26
    已复制 1 个文件。
    Script Success, Applications Context update complete.
    Configuring templates from all of the product tops...
         Configuring AD_TOP........COMPLETED
         Configuring FND_TOP.......COMPLETED
         Configuring ICX_TOP.......COMPLETED
         Configuring IEO_TOP.......COMPLETED
         Configuring BIS_TOP.......COMPLETED
         Configuring AMS_TOP.......COMPLETED
         Configuring CCT_TOP.......COMPLETED
         Configuring WSH_TOP.......COMPLETED
         Configuring CLN_TOP.......COMPLETED
         Configuring OKE_TOP.......COMPLETED
         Configuring OKL_TOP.......COMPLETED
         Configuring OKS_TOP.......COMPLETED
         Configuring CSF_TOP.......COMPLETED
         Configuring IGS_TOP.......COMPLETED
         Configuring IBY_TOP.......COMPLETED
         Configuring JTF_TOP.......COMPLETED
         Configuring MWA_TOP.......COMPLETED
         Configuring CN_TOP........COMPLETED
         Configuring CSI_TOP.......COMPLETED
         Configuring WIP_TOP.......COMPLETED
         Configuring CSE_TOP.......COMPLETED
         Configuring EAM_TOP.......COMPLETED
         Configuring FTE_TOP.......COMPLETED
         Configuring ONT_TOP.......COMPLETED
         Configuring AR_TOP........COMPLETED
         Configuring AHL_TOP.......COMPLETED
         Configuring OZF_TOP.......COMPLETED
         Configuring IES_TOP.......COMPLETED
         Configuring CSD_TOP.......COMPLETED
    AutoConfig completed with errors.
    The log file for this session is located at: D:\oracle\VIS\inst\apps\VIS_jarry\admin\log\05242025\adconfig.log
    C:\DOCUME~1\jarry\LOCALS~1\Temp>if 1 == 0 goto :runProcess_5
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Cannot execute configuration of Applications Techstack\n";
    "Cannot execute configuration of Applications Techstack\n";
    C:\DOCUME~1\jarry\LOCALS~1\Temp>goto :SCRIPTEND
    C:\DOCUME~1\jarry\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(set date=2007-05-24 星期四 )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>(set time=20:29 )
    C:\DOCUME~1\jarry\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : APPL TOP : 2007-05-24 星期四 20:29
    FINISHED INSTALL PHASE : APPL TOP : 2007-05-24 星期四 20:29
    C:\DOCUME~1\jarry\LOCALS~1\Temp>echo "Install APPL_TOP run complete."
    "Install APPL_TOP run complete."
    D:\oracle\VIS\inst\apps\VIS_jarry\temp\adrunat.cmd has succeeded
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    Database Availability
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-24 星期四
    20:29
    ECHO 处于关闭状态。
    ECHO 处于关闭状态。
    2007-05-24 星期四 20:29
    VIS_jarry.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\ORACLE\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\db\tech_st\10.2.0\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.2.0 - Production on Thu May 24 20:29:45 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-24 星期四
    20:29
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib"
    SQL*Plus: Release 10.1.0.5.0 - Production on 星期四 5月 24 20:29:47 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    已连接。
    从 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options 断开
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : jarry
    sDbDomain : cppw.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@jarry.cppw.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.3\VIS_jarry.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\VIS_jarry.cmd
    ADOVARS environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://jarry.cppw.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://jarry.cppw.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://jarry.cppw.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    Database Availability
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:27
    ECHO 处于关闭状态。
    ECHO 处于关闭状态。
    2007-05-25 星期五 08:27
    VIS_jarry.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\ORACLE\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\db\tech_st\10.2.0\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 25 08:27:47 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:27
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib"
    SQL*Plus: Release 10.1.0.5.0 - Production on 星期五 5月 25 08:27:49 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    已连接。
    从 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options 断开
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : jarry
    sDbDomain : cppw.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@jarry.cppw.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.3\VIS_jarry.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\VIS_jarry.cmd
    ADOVARS environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://jarry.cppw.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://jarry.cppw.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://jarry.cppw.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    Database Availability
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:38
    ECHO 处于关闭状态。
    ECHO 处于关闭状态。
    2007-05-25 星期五 08:38
    VIS_jarry.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\ORACLE\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\db\tech_st\10.2.0\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 25 08:38:02 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:38
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib"
    SQL*Plus: Release 10.1.0.5.0 - Production on 星期五 5月 25 08:38:03 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    已连接。
    从 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options 断开
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : jarry
    sDbDomain : cppw.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@jarry.cppw.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.3\VIS_jarry.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\VIS_jarry.cmd
    ADOVARS environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://jarry.cppw.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://jarry.cppw.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://jarry.cppw.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    dest : D:\oracle\VIS\inst\apps\VIS_jarry\appl\admin\VIS_jarry.xml
    Database Availability
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:48
    ECHO 处于关闭状态。
    ECHO 处于关闭状态。
    2007-05-25 星期五 08:48
    VIS_jarry.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\ORACLE\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\db\tech_st\10.2.0\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;D:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 25 08:48:21 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd sqlplus G:\EBS\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    G:\EBS\startCD\Disk1\rapidwiz>echo off
    2007-05-25 星期五
    08:48
    "The environment settings are as follows ..."
    " ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;c:cygwin\bin;c:\vs8\vc"
    " LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib"
    SQL*Plus: Release 10.1.0.5.0 - Production on 星期五 5月 25 08:48:22 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    已连接。
    从 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options 断开
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : jarry
    sDbDomain : cppw.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@jarry.cppw.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at D:\oracle\VIS\db\tech_st\10.2.0\appsutil\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\db\tech_st\10.2.0\VIS_jarry.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.3\VIS_jarry.cmd
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\ora\10.1.2\VIS_jarry.cmd
    APPL_TOP environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\VIS_jarry.cmd
    ADOVARS environment file passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    APPSCONFIG passes instantiated variables test:
    File = D:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = D:\oracle\VIS\inst\apps\VIS_jarry\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://jarry.cppw.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://jarry.cppw.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://jarry.cppw.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    instantiate file:
    source : G:\EBS\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry.xml
    instantiate file:
    source : D:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_jarry

  • Gettig the error at the end of single node installation on OEL5.6 32-bit

    Gettig the following error at the end of single node installation on OEL5.6(32-bit)
    I am getting the following error enf of the single node installation on OEL5.6(32-bit). I have installed the following RPMs
    rpm -Uvh sysstat
    rpm -Uvh libaio-devel
    rpm -Uvh compat-libstdc++
    rpm -Uvh compat-libstdc++
    rpm -Uvh xorg-x11-libs-compat-
    rpm -Uvh unixODBC-2.2.
    rpm -Uvh unixODBC-devel
    rpm -Uvh libXp-
    rpm -Uvh openmotif21
    These are following failed, when I clicked the respective button I get these respective errors...
    HTTP
    checking URL = http://linux1.oracle.com:8001
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://linux1.oracle.com:8001/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    SP
    checking URL = http://linux1.oracle.com:8001/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Please let me know how to fix this.
    Thanks.
    Joy.

    Helios,
    While starting the application I am getting the following...
    ============================================
    [applprd1@linux1 scripts]$ ./adstrtal.sh
    You are running adstrtal.sh version 120.15
    Enter the APPS username: apps
    Enter the APPS password:
    The logfile for this session is located at /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adopmnctl.sh start
    script returned:
    You are running adopmnctl.sh version 120.6
    Starting Oracle Process Manager (OPMN) ...
    adopmnctl.sh: exiting with status 0
    adopmnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adopmnctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adalnctl.sh start
    script returned:
    adalnctl.sh version 120.3
    Checking for FNDFS executable.
    Listener APPS_PRD1 has already been started.
    adalnctl.sh: exiting with status 2
    adalnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adalnctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adapcctl.sh start
    script returned:
    You are running adapcctl.sh version 120.7.12010000.2
    Starting OPMN managed Oracle HTTP Server (OHS) instance ...
    adapcctl.sh: exiting with status 204
    adapcctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adapcctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoacorectl.sh start
    script returned:
    You are running adoacorectl.sh version 120.13
    Starting OPMN managed OACORE OC4J instance ...
    adoacorectl.sh: exiting with status 150
    adoacorectl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoacorectl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adformsctl.sh start
    script returned:
    You are running adformsctl.sh version 120.16
    Starting OPMN managed FORMS OC4J instance ...
    adformsctl.sh: exiting with status 150
    adformsctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adformsctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoafmctl.sh start
    script returned:
    You are running adoafmctl.sh version 120.8
    Starting OPMN managed OAFM OC4J instance ...
    adoafmctl.sh: exiting with status 150
    adoafmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoafmctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adcmctl.sh start
    script returned:
    You are running adcmctl.sh version 120.17.12010000.3
    Starting concurrent manager for PRD1 ...
    Starting PRD1_0627@PRD1 Internal Concurrent Manager
    Default printer is noprint
    adcmctl.sh: exiting with status 0
    adcmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adcmctl.txt for more information ...
    .end std out.
    .end err out.
    Executing service control script:
    /u01/prd1/inst/apps/PRD1_linux1/admin/scripts/jtffmctl.sh start
    script returned:
    You are running jtffmctl.sh version 120.3
    Validating Fulfillment patch level via /u01/prd1/apps/apps_st/comn/java/classes
    Fulfillment patch level validated.
    Starting Fulfillment Server for PRD1 on port 9301 ...
    jtffmctl.sh: exiting with status 0
    .end std out.
    .end err out.
    adstrtal.sh: Exiting with status 4
    adstrtal.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log for more information ...
    ===============================================
    [Service Control Execution Report]
    The report format is:
    <Service Group> <Service> <Script> <Status>
    Root Service Enabled
    Root Service Oracle Process Manager for PRD1_linux1 adopmnctl.sh Started
    Web Entry Point Services Enabled
    Web Entry Point Services Oracle HTTP Server PRD1_linux1 adapcctl.sh Failed
    Web Entry Point Services OracleTNSListenerAPPS_PRD1_linux1 adalnctl.sh Already Started
    Web Application Services Enabled
    Web Application Services OACORE OC4J Instance PRD1_linux1 adoacorectl.sh Failed
    Web Application Services FORMS OC4J Instance PRD1_linux1 adformsctl.sh Failed
    Web Application Services OAFM OC4J Instance PRD1_linux1 adoafmctl.sh Failed
    Batch Processing Services Enabled
    Batch Processing Services OracleConcMgrPRD1_linux1 adcmctl.sh Started
    Batch Processing Services Oracle Fulfillment Server PRD1_linux1 jtffmctl.sh Started
    Other Services Disabled
    Other Services OracleFormsServer-Forms PRD1_linux1 adformsrvctl.sh Disabled
    Other Services Oracle Metrics Client PRD1_linux1 adfmcctl.sh Disabled
    Other Services Oracle Metrics Server PRD1_linux1 adfmsctl.sh Disabled
    Other Services Oracle MWA Service PRD1_linux1 mwactlwrpr.sh Disabled
    ServiceControl is exiting with status 4
    Thanks.
    Joy.
    Edited by: user11952526 on Jun 26, 2011 11:51 AM

  • R12 installation errors

    Hi:
    I started to installing R12 on XP this morning and it stops right now at Validate system configuration: HTTP, Virtual Directory, Login Page, Help Page and JSP are all failed.
    Two listeners are up, DB is up, IP address in ipconfig and hosts file are the same.
    Two listener names are Oracle_VIS_db111_RDBMSTNSListenerVIS and OracleTNSListenerAPPS_VIS, are they right?
    There is one thing wired this time: I was prompted (don't remember exactly) "JS2 is blocked, do you want to unblock it." twice and I said yes to unblock during the installation.
    Please guide me to fix the issue. Thanks a log.

    Hussein:
    I found the conf_VIS and continued. Got the same problem:
    HTTP
    checking URL = http://p23g.home.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://p23g.home.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://p23g.home.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

  • Post Installation error of Oracle AppsR12

    Hi,
    During the post Installation checks of Apps R12 installation, I got the following error.
    adopmnctl.sh: Starting Oracle Process Manager (OPMN)
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Then
    I have created down all the application services, database and listener.And created softlink as root user and I press Retry button. Still I am getting this error.
    Then I ran the ./adapcctl.sh manually, After watching the log file, I got the following error in the log file.
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    getaddrinfo(localhost, NULL, 1) failed (Temporary failure in name resolution): Connection refused
    opmnctl: opmn start failed.
    : adopmnctl.sh: exiting with status 2
    Could you please help me to get rid of this error and finish the installation.
    Thanks and Regards,
    Khasim

    please confirm
    you have correct IP defined for localhost i.e., 127.0.0.1?
    R12 Rapidwiz Postinstall Steps Http, Login page, Virtual directory, JSP, Help Page Fails (Doc ID 414414.1)
    ApPsMaStI
    sharing is Caring

  • Post Installation Errors in loading ORacle R12 on windows vista!!! HElp!!!!

    Hi,
    I got all errors in the Post installation checks when loading ORacleR12 E business suite on vista.
    Acutally during installation steps, at step 1 ..at around 30 of 147, the installation stopped quoting an error like unzip file not found or cant be opened....i dont clearly remember but the step 1 was not completedly fully..
    THen it skipped to step 2,3 and I think the same happened in step 4 too. There was an error and it skipped some install files i think.
    How do I Load the s/w correctly or now how do I solve is errors now?
    PLEASE HELP! I Am novice to APPS so give me a detailed answer please...like the directories to look for and the paths and solutions too...
    Await an answer for the GURUS and EXPERTS!!!
    Regards,
    indira meduri
    Edited by: user529846 on Jan 18, 2010 11:13 PM

    Hi,
    Below are the errors i got in Post installation checks...! Can you help?
    Database Availability
    command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:52 CST 2010
    Parameters passed are : /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1 command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:53 CST 2010
    Parameters passed are : /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
    Configuration Upload
    uploading config file at /tmp/01200535/conf_PROD.txt
    Failed upload of config file at /tmp/01200535/conf_PROD.txt
    Environment File
    RW-50016: Error: - Database ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.3/PROD_linux.env RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env RW-50016: Error: - APPL_TOP environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/PROD_linux.env RW-50016: Error: - ADOVARS environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adovars.env RW-50016: Error: - APPSCONFIG was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adconfig.txt
    DBC File
    RW-00023: Error: - DBC file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/appl/fnd/12.0.0/secure/PROD.dbc
    HTTP
    checking URL = http://linux.server:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://linux.server:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://linux.server:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Maybe you are looking for

  • What can I do to download ITunes? It says Error 7 (Windows 127)

    I have deinstalled and restalled I Tunes after it read Error 7 (Windows 127) . I still can not open up I Tunes.   I have an 84-bit Windows 8.1.  Can anyone help me?

  • Error while deploying OIA in domain same as OIM

    HI, I have installed and configured IDM and IAM in one domain. Every thing is working fine. Later i tried to deploy OIA in same domain. I followed OIA install guide. I configured OIA. Copied few Jars from OIM home to lib in OIA as per few forum threa

  • Steps to upgrade HFM (EPMA) from 11.1.1.3 to 11.1.2.1/11.1.2.2

    Hi, Can someone please let me know how to upgrade the EPM-HFM application in 2/3 steps. I know how to upgrade if it is classis application just by upgrading the database in EPM System Configurator. What happens or need to be done if it was built in E

  • Treo 700p restarting when trying to sync

    My treo 700p keeps restarting whenever I try to sync it with my Mac. I have been having syncing problems for awhile now, but now it just restarts everytime, and discontinues the sync. Any ideas on how to proceed? I was going to troubleshoot the synci

  • Lightroom mobile cannot import from the imported from camera kit.

    Hi, I am new to Lightroom mobile and trying to make a new collection from the camera kit. 1.I have imported photos using my camera kit from an sd card. (file format is raw) 2.There are the imported photos on my ipad visible. 3.On Lightroom mobile, I