S10 Loads Bios then Stops, have to Hit Any Key to Load Windows XP

I have a Lenovo S10, after powering on, the just loads the bios screen of LENOVO.  With the F2 & F12 at the bottom of the screen.  If you press F2 to setup & F12 to Boot Menu, it will do so. 
When you press other keys, it will then load windows xp. 
In the Boot Order, I already put the HDD on top (the first) but you have to hit any key for Windows to load.
Why?
Also, flashed the bios to version 14CN94WW.  But did not help.
Suggestions?  Assistance?

Hi and welcome to lenovo forum,
to exclude BIOS ... go in BIOS and press F9 to setup defaults....
set in Config page quickstart disabled and Beep disabled
 F10 and exit
unplug PSU and Battery press 30seconds switch On Button ...
Then plug PSU and Battery in ... press Switch On ... if this wait behavior is gone...OK if not ... it could something to do with harddrive ... easy if you have another harddrive to check this , if not save your data and work on other media and recover to factory condition...
overal there is no wait for key in BIOS should boot straight forward into OS without that press any key ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

  • My iPod syncs about 350 songs out of 3000 then stops syncing abruptly. Any ideas whats going on?

    My iPod Classic syncs about 350 songs out of 3000 then stops syncing abruptly. Any ideas whats going on? It was working fine up to a couple of days ago and i'ts barely over a year old.

    Hi Owen7777,
    Your problem may be the same as described in this topic: https://discussions.apple.com/thread/4142872?tstart=0
    The issue is described along with tips. It is most likely to be the hard drive.
    Good Luck,
    Stefan

  • Just powered down and moved my iMac and when powered back up all it says is no bootable disc-please insert disc and hit any key......what do I do?

    when starting up my iMac (had just moved it from one room to another, was working fine) it only shows on the screen "no bootable disc...please insert disc and hit any key".....what do I do?

    That sounds like a message from a DOS-based computer. A Mac would just show a folder with a question mark, unless they've changed things recently. Do you have a BootCamp partition?
    Try holding down the option key immediately after the Chime. You should go into the startup manager and it will show all bootable drives. Pick yours, then go into System Preferences and set your startup disk.
    Next would be to try a Safe Boot by holding down the shift key right after the chime until you see the gray screen. It will take a while to boot up as it is running some disk checks.

  • Get "no bootable device- insert boot disc and hit any key" error

    Hp G72 Laptop, Windows 7 64 bit,
    "no bootable device-insert boot disc and hit any key" (I have no boot disc.)
    I was in the process of replacing the hard drive and the computer was starting the final phase after copying all files. When it restarted the first time, I got the message. I was getting this message randomly prior to replacing the hard drive and if I turned it off for 2 or 3 hours and turned back on I would not get the message. The reason for replacing the hard drive was a "Smart Disc " imminent failure error message.

    Yes and yes. The final recovery disc had completed and it was moving to the next phase. It said the computer would restart several times during this phase and when it went to the first restart, the error message came up and I could proceed no further. I ctrl/alt/del and restarted, pressed escape to get the start-up menu but was lost at all the options. The information screen looked like the old hard drive info.

  • My shuffle only plays a few songs and then stops. ihave to hit shuffle again to to get it to shuffe afew more song. any ideas how to fix would be appreciated

    myipod touch will only play a few songs at a time on shuufle then stop. i have to restart the shuffle to get some more songs to play then it will stop again.any help woulp be appreciated. songs that i have purchased from itunes seem not to be affected just the ones i added from my cds. yhank you

    clawnscratch wrote:
    Shows the following information:
    Kind: AAC audio file
    Size: 3.3 MB ............ (varies per song)
    Bit Rate: 128kbps
    Sample Rate: 44.100 kHz
    Does any of this mean mean anything regarding the problem?
    All it shows is that the tracks SHOULD be OK.
    Next thing to try is to restore her shuffle in iTunes and reload.

  • Have a MacBook Pro with OS X.  Loaded windows 8 in bootcamp and lost trackpad. Keyboard will work if hit esc key at opening windows screen.  Any ideas? Microsoft has none.

    I loaded Windows 8 update on my MacBook Pro on the bootcamp partition and now my trackpad doesn't work on the windows side.  The keyboard works if I first hit the esc button at the opening screen.  Microsoft was no help.  I don't know how to delete the driver for the trackpad in OS X and reinstall to see if it corrects the problem.  Any Ideas?

    have found a temp solution now, before apple releases its update. this will make ur trackpad work but without any gestures and u'll have to press to select the left or right click.
    here's the solution.
    1. go to device manager
    2 locate ur trackpad and right click and choose to update the driver.
    3. select browse my computer for driver software.
    4 select "let me pick from the list of device drivers on my compuet".
    5 just keep pressing the "NEXT" button after that.
    thats its u'll have a working trackpad for now.

  • TS1398 imac connects to internet for a few mins then stops and cannot find any wifi network-other devices are connecting without problems

    My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please

    Try posting in the iMac forum. This is the iPod touch forum.

  • How to read from a JTextField without hitting any key?

    Hi guys,
    I have a JTextField. If the user enters data into it, i would like to read it even if he doesn't hit any enter key or Tab key or anything else. Actually, in my application, user enters data in the TextField(he doesn't hit any other key)and that should automatically trigger a setter method? Is there any actionListener which can do this?

    Another way would be to use javax.swing.Timer class. This class will call the actionPerformed method every [milliseconds] (An argument in Timer's constructor). When actionPerformed is called every half-second or so, it can check for a change in the text field.

  • How to setup my BIOS to boot my PC from any key on keyboard

    Can somebody tell me how and what to setup in BIOS (Neo2-FX with bios 1.b) to boot my PC from any key on keyboard? Only thing that I see in this bios is option “S3 wake up by PS2/Keyboard” but this didn’t help me.

    What is your pc spec's in full details including ur psu and put it in your sig? how did you updates your BIOS?

  • My iPod 4th generation screen shakes back and forth every once in a while and the touch screen stops working. Then I have to hit the sleep button on and off to make it work

    My iPod touch 4th generation screen shakes back and forth every once in a while and won't let me use the touch screen. I have restored it at least 5 times to factory setting and it is still happening. The only way to stop it is to hit the sleep button off and then on again. It happens about once every 5 minutes. Please help.

    If you successfully (completed all steps without errors) restored to factory settings/new iPod and still have the problem that points to a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I've purchased two standard movies from iTunes and they started downloading then stopped saying download error any ideas on what to do??????? Help please!!

    I've purchased two standard movies from the iTunes store and they both started to download very quickly and then out of the blue, they stopped and the message for both read as follows: error try again....now, no matter how many times I try again, neither of these movies will complete the downloading process before that same message pops up again!!!! It's making me so aggravated!!! Someone please help!!! I've spent good money on these vids.....what do I do???

    Try to download them in iTunes on your computer. Connect your iPad to your computer and launch iTunes. Click on your iPad name on the left side of iTunes and then from the menu at the top of the screen go to Store>Check for Available Downloads. You should be taken to another screen where the incomplete downloads can finish and then you can sync them to your iPad.

  • I was using my Mac and it started flashing white and didn't let me hit any keys or buttons. It didn't stop until I hit the power button on the back of the computer.

    I have an iMac with a 2.7 GHz Intel Core i5, a 8 GB memory, and OS X Yosemite, version 10.10.2.
    I was wondering if what happened with my computer could be a virus or something else. It's only a few months old and it's never happened before.
    Thanks.

    It's not a virus. Don't seek a solution for a problem that doesn't exist. Pursuing that option will only lead to real problems.
    Contact AppleCare using the Contact Us link below right.
    Assuming that you restarted it and it appears to working properly again, I doubt they will have anything to offer, but you ought to create a case for future reference. It may never happen again, which means you will never know the reason. If it happens again though, even once, insist that Apple fix it.

  • V3-571G-6407 No Bootable Device. Hit any key.

    A while back I was swapping HDD's and the internal SATA seems to have malfunctioned and no longer recognizes anything plugged into it.Fast forward a bit, I got a disc caddy for a secondary HDD, figuring I could just use the secondary slot to run/boot into an OS. However, I'm having issues with the BIOS recognizing the HDD. When running a bootable USB to install an OS, the OS can and does recognize the HDD and proceeds to install to it. Once rebooted to finalize installation, the laptop continues to not recognize the HDD and will not boot to it. Likewise, when using a live-USB, the OS sees and can read/write from the HDD just fine. Nothing I change in BIOS will allow me to see the HDD. And the HDD is set to having a Master partition(which even if it didn't; the BIOS should still at least be able to recognize that it's there).

    Hi. I see here is no help at all. I have same problem. Did you solve it or throwen tablet into bin.

  • Mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly

    mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly
    any help ?

    You most likely ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Is there a reason that I can't download the latest update for my iPhone 4? It downloads halfway and then stops.

    Is there a reason that I can't download the latest update for my iPhone 4? It downloads halfway and then stops.

    Have you ever jailbroken your iPhone with tether? Because if you have the jailbreak keeps a file on your phone making it so you can't update. To solve this problem your going to have to reset your phone.

Maybe you are looking for