S6000-D not booting crash in lenovo's screen

After some hours the tablet stops working, it freezes at Lenovo's screen.
I try to recovery but in recovery mode the UP volume button don't work.
Can anyone help me?
Thanks.
Solved!
Go to Solution.

If you got it from aliexpress for example and confirmed order received or you're protection has run out unfortunately you can't do much.
If you're still under aliexpress protection you can open a case. Same goes for other sellers/sites if you paid your order using PayPal.
Really sorry about this....what can I say.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Will not boot up to log in screen

will not boot up to log in screen when powered up, all I get is a grey screen with apple logo in middle and spinning timer
I have tried resetting SMC
I have tried starting up in Safe Mode (it won't do that either)
I have gotten into disk utility to repair disk
I have tried resetting PRAM
nothing... we are on a network in a school district so my next step is to re-image it but wondering if there is something else I should try first
if not then how do I backup files that are needed before I re-image
thanks, Cindy

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Satellite Pro L300-1FN does not boot - hangs at BIOS splash screen

My Satellite pro L300-1FN is refusing to boot up. When switched on the laptop displays the toshiba/insyde H20 BIOS splash screen and the "Press F2 go to Setup Utility, F12 go to boot menu" message and flashes the hard disk access light but does not attempt to continue loading. I have left the bios at the splash screen but it does nothing for many hours on AC or runs the battery flat while on battery.
Is there a way of re-setting the BIOS on this unit? If it were a desktop unit I would remove the CMOS battery to force a BIOS reset but this is impossible on a laptop. The hard disk is fine as I have connected it to another system to remove valuable data.

*I managed to fix this issue* ,,, thanks to some other dudes on other forums
What i did was Format a Floppy disk as MS-DOS boot using a Windows XP PC and USB floppy drive, then downloaded the latest BIOS for my L300-1BW laptop model, copied *.fd bios image to the floppy disk and renamed it to BIOS.fd.
Connect FDD to the toshiba laptop with out AC connected. Held Power button for 12 seconds, connected AC adapter, then held Fn+F, powered on , and kept the Fn+F keys held down for about 10 seconds into the reading of the floppy drive just to be sure, then let go. The screen was black throughout the process. I left this for a few minutes, or until it had finished, the laptop rebooted itself, and voila, it now goes passed the TOSHIBA POST logo screen :)
I hope this helps others with Toshiba Laptops. should work for any Toshiba laptop.

Macbook air will not boot 10.5.7 after screen replacement

Hello
Following screen replacement on original macbook air I can only take system to 10.5.6. Will not update to 10.5.7 or 10.6.
Any suggestions?
GeorgeV

BTW, I see the threads on the Thunderbolt update kernel panics. I was kind of hoping Apple resolved the problem since I thought they had pulled the update. Anyway, I do not *think* I am getting a Kernel panic as the boot does not even get as far as the Apple logo. It just sits on the gray screen and does nothing.

IMac will not boot. Stuck at white screen after chime.

I am starting a new thread this because it seems that other people with this problem are able to get their Macs working with some sort of keyboard combination on boot. I am not. Nothing is working. My computer is currently a 27 inch brick... Actually a lamp, since it is frozen on a really nice white screen.....
Installed Yosemite on my 27" iMac (early 2010, i7) when Yosemite came out a couple weeks ago. Everything was working fine but it wouldn't read my external drive, so I did a reboot. After the reboot, it freezes on the white screen after the chime. No keyboard combinations work to get it to do anything....also, if I hit the power button it shuts off immediately.
Nothing is working to get it moving. And yes, I am using a usb keyboard, not the Bluetooth, to try to hit any of the keyboard combinations posted in various discussions.
My AppleCare is expired, so I'm going to be very upset if I have to go pay to have Apple fix their problematic software. Any help you guys can give will be greatly appreciated.
Thank you,

See if you can boot into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

After putting laptop hibernate, It will not boot, or post. Blank screen

After putting my Touchsmart tx2 to hibernate, I came back to turn it on and all that happens is the lights light up, the fan spins and nothing else. There is no post, no boot, and no screen action at all.
HELP
I need this really bad for school and am not happy about this

Hi
Please find the link given below might help you to fix your issue.
How to Troubleshoot Problems When a Computer Does Not Start Up or Boot Properly
Resolving Problems with Sleep and Hibernate Mode windows 7
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

IMac will not boot, green vertical lines on screen

My iMac 27" purchased in 2012 is running Mavericks OS. I did a software update last week, and switched on the machine for first time since then, today.
I get 4 or 5 green vertical bars down the start-up screen with the apple logo and timer running. The screen then goes to a grey screen and just hangs.
Tried safe boot and nvram clear but did not work. Will try again this evening.

JamesBKK wrote:
Tried safe boot and nvram clear but did not work. Will try again this evening.
Hi, try as well: Intel-based Macs: Resetting the System Management Controller (SMC)
Cheers

When opened, Firefox screen becomes blue, not a crash, just the whole screen is blue.

It isn't a "Blue Screen of Death", the website doesn't load and the Firefox screen turns completely (no search bars left) tinted blue color that Windows 7 uses. I am guessing this is related to an addon but not sure. Here is a picture: http://i1176.photobucket.com/albums/x328/Deathtomyfoe/MozillaError.png

hello Thomas_Hunt, can you try launching firefox in safe mode by pressing the shift key while it is starting and see if the issue is occurring there too? maybe a theme or hardware acceleration is interfering here...
if safemode is working, you can try disabling hardware acceleration in firefox > options > advanced > general and or disable addons that might cause the problem. it also would be interesting which graphics hardware (adapter description, driver date & driver version) you are using - you can access this information in firefox > help > troubleshooting information towards the bottom of that page... thank you
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
'''edit: from another user we found out that this might be related to malware, could you see if you have the same addons installed, remove/disable them & run a in-depth scan of your system with security software - see''' https://support.mozilla.org/en-US/questions/940393#answer-377118

MacBook not booting up, stuck on blue screen

I just got my MacBook and a friend of mine who is quite experienced with Macs had it for the weekend just to look at and play with... I got it back and it isn't booting up. The grey Apple screen comes up, the little spinning line-circle shows up, then it goes to the blue screen that usually comes before the "Starting up Mac OS X" screen, but it stays blue and the fan spins up and no progress is made and the process cant be broken without force shutting down the computer. If it is necessary to erase the hard drive and reinstall Tiger, I can do that, as my data is backed up... but what would I do?

Try a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
and/or an SMC reset...
http://docs.info.apple.com/article.html?artnum=303319
Failing this, start up from your Install DVD and run Disc Utility to repair/verify the permissions and the drive itself.

IMac not booting/finding HDD? White screen on Boot

Hi
Upgraded to Yosemite on launch day and the iMac has been fine up until last Monday.
We had a power cut and the iMac was on at the time. Since then, any time I try to switch it on I get a white screen.
I've created a Yosemite boot drive on my memory stick and it finds it. Gone into Disk Utility and it says the drive is damaged and backup any data is can.
Are the power cut and HDD failure connected or could it be something to do with Yosemite?
Its asking me to backup the data on the HDD but is this possible if I cant boot into it?
Thanks

I reopened the imac, removed the optical drive (hdd was already out). Restarted with my USB external HDD connected, nothing happened, white screen still. I then reconnected the friend's USB HDD also and restarted and got the screen to choose a startup disk.
Computer then boots fine from my external hdd. Turn it off, reinstall my HDD and optical drive.
Turn it on again and am greeting with the same blank white screen again.
I then remove the optical drive again and am able to boot from the internal drive. BUT when I go to system preferences to change startup disk, if I check the internal drive or the external USB drive and click reset I got the error "building boot caches on boot helper partition failed". I have no idea what is going on. I repair permissions several times.
I then restart the computer several times and it seems to restart consistently from the internal drive. I then put the optical drive back in and it now appears to be working.
The original external drive I booted from was a 10.5 macbook pro cloned drive. So I don't know if that somehow corrupted my 10.8 imac drive or some firmware that made it such that it wouldn't boot.
What a hassle.
And for anyone who cares and has read this far, I am living in a remote town in Mongolia at the time and didn't have any suction cups to remove the front glass from the imac. I do have an iSesamo tool to open up ipod touches and such, and was able to use that to get the front glass off.
If anyone has an idea of what happened I'd be interested in hearing.

SOLVED-Install not booting on Intel Imac-white screen

I just tried to install Archlinux with the new install disc fo the fifth time, without succes.
When I restart the computer all i get is a white screen.
Restarting the install disc, mounting the harddisk partitions and arch-chrooting I can get into the installed linux, I can do everything even install new programs and get these working but when starting normally it's the white screen again.
It is an Intel Imac dual core with 27" screen on whitch the old install disc did it's work flawlessly.
Any idea where I can start searching?
Last edited by mianka (2012-08-03 14:14:52)

How long do you wait on that white screen?
I have arch on two different macs - and early iMac, and an early macbook. They both have long delays on the white EFI screen.
There are allegedly ways to fix this but I have never bothered as I do not reboot either of these machines that often. Many reports claim it should be a 30 second delay, but on the IMac I'm typing from now (in arch) it is at least 2 minutes. Whenever I need to reboot this machine, I just type reboot, then go for coffee.

Operative system not booting (spinning wheel on blue screen forever)

Hello,
I've replaced the standard hard drive of my (late 2009) MBP with a Seagate Momentus XT 750, this is an hybrid ssd hard drive.
Lately I've seen that the system started to slow down and spotlight started to rebuild its index.
After the indexing I've decided to reboot and I've got stuck with a spinning wheel on a blue screen at system startup time.
I've changed the hard disk and replaced it with the original one that still has the original installation and it works!
The weird thing is that if I connect the Seagate Momentus to an usb port using an adapter it also works! I can read all its files with no problem, so I tough the problem might be some damaged block in the part of the disk containing the operative system.
I've launched the Disk Utily app and I've tried to repair the disk and the permissions several times but it still doesn't boot the system.
Any idea?

Try a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
and/or an SMC reset...
http://docs.info.apple.com/article.html?artnum=303319
Failing this, start up from your Install DVD and run Disc Utility to repair/verify the permissions and the drive itself.

My MacBook will not boot up past the white screen and rotating circle

Tried to start up my MacBook. Can't get past the white screen and rotating circle. Left it on for 10 min. same results. Any solutions before I bring it in for repair? Thanks.

Zap the pram
Maybe wait longer and see if it does anything or if anything comes up.

Not booting: 3 tones and white screen

I have had my 2 gig dual core MB with 2 gig RAM for about 6 days. Very nice. It had a couple of kernel panics and then started to get a nasty problem. When I reboot I get the usual startup chime, 3 loud `beeps' and a white screen. The sleep light also flashes. It then sits on the white screen. A couple of times I got it past this by letting it sit for awhile and it rebooted normally. Its at the mac shop now.
Is this likely to just be bad ram ? They tried reseating at the shop but no joy. I guess I was suprised that if the ram was bad it didn't manifest immediately -- or can it go bad with the heat of using the machine ?
Thanks - Michael
(PS -- I haven't dropped it!)

Looks like this is the answer --
"Some RAM may appear to pass the Power-On-Self-Test (POST) but still cannot be used by the operating system. In this case, the computer will display a gray screen, sound three tones and blink the power LED on the front of the computer three times, pause, and repeat the blinking until the computer is turned off."
http://docs.info.apple.com/article.html?artnum=303083
cetainly those are my symptoms.
Michael

IdeaTab A2109A will not boot past Lenovo Splash screen

Tablet was charging over night, early in the morning I heard a couple of beeps, and thought it was my phone. After waking I turned on the Tablet and first saw a green circle with 100%, then after trying the power switch again, it booted to the Lenovo splash screen with the audio and color bar, but will not boot to the operating system.

I gave up and sent the Tablet into Grapevine, Texas under warranty.

S6000-D not booting crash in lenovo's screen

Similar Messages

Maybe you are looking for