Safari 4 no longer displays web pages

Since I have installed Safari 4, I cannot display a couple of web pages any longer. I can still access those with Safari 3 and Firefox 3.
I have deleted Safari preferences and reset Safari, helplessly.
Any idea ?

For example, if I try to modify the parameters of a Google Adwords campaign, I get the expected "frame" but no campaign-related data at all within it. The corresponding window remains grey, unlike what happens with Safari 3 or Firefox 3.
Does that ring a bell?

Similar Messages

Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
The airco system gives an error:
Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
Advanced info: ssl_error_no_cypher_overlap
The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

On windows 7 machine, safari fails to display web sites

on windows 7 machine, safari fails to display web sites

what happens is you type in the url and press enter then nothing. the fix was to run "netsh winsock reset"
If the winsock key reset helped things, that usually indicates trouble with a LSP. (That's also consistent with a 'silent" Safari page-load failure.) If you run into the problem again, perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

1.1.3 problems displaying web pages

After updating (and paying $20) to 1.1.3 Safari on my iTouch is now not displaying web pages nicely. Most don't fully load. Some load as text instead of html. Often I get "can't locate server." even for CNN and Apple.com. Google search doesn't work.
All these pages load to some degree but something is missing?!?!?
"Cannot connect to YouTube"
"Error Retrieving Chart" when trying to get stocks from Yahoo widget.
Anyone else having these issues??

Misery loves company..... I'm having the EXACT same symptoms. The Weather app also gets a failure trying to update. It's even erratic trying to access the iTunes on my iPod. Most times, I get an unable to connect to server message after it appears some items are downloaded. On Mail, it works, but even though I'm accessing Gmail via POP, after accessing it okay it then tries to access via IMAP, and gives me an error. And it sometimes will give me an entry saying "Download next 25...." and shows me I have a few million unread emails. But if I tap that entry it goes away. I'm also using a WRT54ag, but I really have a problem having to swap this out to get wireless going again. Hopefully, Apple will come to the rescue before I decide I need to go down that path. I also tired to restore the iPod, but after a few minutes it told me it couldn't restore. I've seen workarounds for that, but.... Anyway, at least I know I'm not hallucinating all these quirky problems.

Can display Web pages from servlet but not applet?

I have been able to display real-world Web pages from a simple servlet using JDeveloper 3.0, but can't figure out how to do the same from an applet. Any hints?

My previous post had the detail...Probably a simple question from a relative novice. I'm having a problem just viewing web pages by calling them from a "list" of URLs in an applet. I built an applet with a split pane that has a JTree on one side and an "HTML viewing pane" on the other. I can click JTree nodes to display local html files, but I don't understand how to display web pages from the Internet. Do I need something like HyperlinkListener to make the jump to "hyper-world"???

Explorer Cannot Display Web Page Desk Top 3000J1157387-A11

Originally worked fine displayed web page withOUT a problem FOR OVER A YEAR. Starting in Jan 2008 (just after warranty EXPIRED) it just reports "cannot display web page" Using my Xp computer I can get all of the web pages to respond.
Using internal checks on the Lenovo 3000J it reports everything is OK.
I can receive updates on this computer and just today I installed all updates through 4/20/2008. Windows Upgrade works fine on the Lenovo. However I cannot access the web otherwise. I am typing this message on my Xp. Computer because I have not been able to get a webpage to display on the Lenovo
I want to stay with Vista Home Premium however HOW CAN I GET THE WEB PAGE TO DISPLAY ?
VIC
Message Edited by vicflack on 04-20-2008 10:51 AM

Thanks for the helf. I disabled the firewall which is norton. and then rebooted still not able to display the web-page. However I may have gotten closer to the problem.
When I select "Properties" from the file menu on the "Cannot display page" I get the following address:
res://ieframe.dll/dnserror.htm#http://www.yahoo.com
Of course it cannot display this page because it does not exist. The page I tried to load was http://www.yahoo.com when I select this page on my Xp computer it loads correctly and under file- properties -address http://www.yahoo.com and all is well with the world.
For some reason on my Lenovo Vista Home Premium Computer Internet EXployer is inserting
"res://ieframe.dll/dnserror#http://www.yahoo.com
Thanks for any help
Vic

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine. Any idea what the problem may be?

You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards.

Display Web Pages

I heard that you could display web pages in a Java program, is this true? If so, how would you do it?

Sorry for the above answer.
You can display web pages in JEditorPane not JTextPane
Following program can show the web pages in Swing program.
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import javax.swing.*;
public class EditorPaneTest extends JFrame
     public EditorPaneTest() throws Exception
          Container con = getContentPane();
          String s = null;
          try {
          s = "file:"
                    + System.getProperty("user.dir")
                    + System.getProperty("file.separator")
                    + "abc.html";
     URL helpURL = new URL(s);
               JEditorPane pane = new JEditorPane();
               pane.setEditable( false ) ;
               pane.setPage( helpURL ) ;
               con.add( "Center" , pane );
     } catch (Exception e) {
     System.err.println("Couldn't create URL: " + s);
               setSize( 400 , 400 ) ;
               setVisible( true ) ;
     public static void main( String args[ ] )throws Exception
          new EditorPaneTest();
thanks.

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

EBS(SSL enabled) URL 12.1.3 cannot display web page though apps services are up

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
        Configuring AD_TOP........COMPLETED
        Configuring FND_TOP.......COMPLETED
        Configuring ICX_TOP.......COMPLETED
        Configuring MSC_TOP.......COMPLETED
        Configuring IEO_TOP.......COMPLETED
        Configuring BIS_TOP.......COMPLETED
        Configuring AMS_TOP.......COMPLETED
        Configuring CCT_TOP.......COMPLETED
        Configuring WSH_TOP.......COMPLETED
        Configuring CLN_TOP.......COMPLETED
        Configuring OKE_TOP.......COMPLETED
        Configuring OKL_TOP.......COMPLETED
        Configuring OKS_TOP.......COMPLETED
        Configuring CSF_TOP.......COMPLETED
        Configuring IGS_TOP.......COMPLETED
        Configuring IBY_TOP.......COMPLETED
        Configuring JTF_TOP.......COMPLETED
        Configuring MWA_TOP.......COMPLETED
        Configuring CN_TOP........COMPLETED
        Configuring CSI_TOP.......COMPLETED
        Configuring WIP_TOP.......COMPLETED
        Configuring CSE_TOP.......COMPLETED
        Configuring EAM_TOP.......COMPLETED
        Configuring FTE_TOP.......COMPLETED
        Configuring ONT_TOP.......COMPLETED
        Configuring AR_TOP........COMPLETED
        Configuring AHL_TOP.......COMPLETED
        Configuring OZF_TOP.......COMPLETED
        Configuring IES_TOP.......COMPLETED
        Configuring CSD_TOP.......COMPLETED
        Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |   10466 | Alive
OC4JGroup:default_group          | OC4J:forms         |   10425 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10062 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10061 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10060 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10059 | Alive
HTTP_Server                              | HTTP_Server        |    9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,

Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
                <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
                        <httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
                <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
                        <sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
      <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
         <httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
         <sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks,

How can I have Safari save my opened web pages when I quit so that when I open next time they will be there?

How can I have Safari save my opened web pages when I quit so that when I open next time they will be there? I can do that in Firefox automatically, but can't seem to find how to do it in Safari. I'm thinking maybe it's just now possible yet?

From your Safari menu bar click History / Reopen All Windows from Last Session.
Or..
Glims can re open tabs from a previous session if that helps.
http://www.machangout.com/
Compatible with Snow Leopard v10.6 and Safari 5+ and it's free.

Safari will not open web pages on my Ipad3

In General Settings, it says there is no Network Available. How do I fix this?

Thank You Demo for your reply. To answer your questions:
Yes, my wireless WiFi is on. It is working because I am using it on my laptop now to reply to you.
I only use my network in my home and it works.
I must have something set wrong on my Ipad3 Settings?
Whenever I try to use Safari, I get the message: Safari cannot open this web page.
Also, I have disconnected the Router power (thinking the Router was bad), waited a minute, and reconnected the power. It doesn't fix anything regarding my Ipad3.
Does this help you determine a possible solution? I hope so! Thanks anyway for your time and effort, if not!

Safari & chrome doesnt display web images

safari & chrome doesnt display web images? ow should i solved this, i've done all necessary first aid like clearing all browsing data, cookies etc but still not working.. I am trying to access Ikea website specifically.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Safari not displaying web pages correctly

I dont know if its my inexperieince, something to do with settings or what but I am finding some of the web pages I am receiveing are not displaying correctly. For example a card company sent me an online form to complete but when I tried to read it some of the information was displayed on top of more information making the whole thing garbled and indeciperable, on another website there was an area with a list of information held in a box but when I tried to read the information it would periodically jump about yet I was no where near the mouse. Both pages are fine on my husbands windows PC. There have been other incidents like this making the transition from windows to Mac very painful. Is this something that can be remedied or are we stuck with it?

When I experience the problem, I sometimes have to zoom in or out, to get the text to be readable.
The following is in the Safari > View menu --

Ios7 Safari displays web page incorrectly

ios7 devices (iPad and iPhone) do not display LSE portfolio web page correctly. Graphics and text boxes at top of page are displayed as text, presumably not recognized as html code of some sort.
LSE say they have checked it out and there is nothing wrong with their code. Apple Genius at Apple store says there is nothing wrong with ios7 and/or Safari.
Someone is wrong or there is a setting somewhere in ios7 that I don't know about.
Any ideas?

The units are missing for the left and top properties, so Firefox is ignoring them as the web console shows.<br />
There should also be a line break before this rule for readability.
Could it be possible that there is a problem with the DOCTYPE if the rule get applied (it shows units in the
screenshot).
<pre>ul.pureCssMenu {
display:block;
zoom:1;
position:absolute;
z-index: 1000;
left: 100;
top: 200;
}</pre>
The same here with missing units in height and width:
<pre>ul.pureCssMenu li.sep span{
float:none; padding-right:0;
width:3;
height:100%;
display:inline-block;
background-color:#CECECE; background-image:none;}
ul.pureCssMenu ul li.sep span{
width:100%;
height:3;
}</pre>

Safari 4 no longer displays web pages

Similar Messages

Maybe you are looking for